How to Program Toyota Homelink Garage Door Opener - Rolling Code (Canada)
Вставка
- Опубліковано 28 тра 2017
- This video shows your how-to program your Toyota HomeLink garage door opener. The first portion explains both steps, without a rolling code and with a rolling code!
Confused, don't be! This is a very simple 2-minute video that shows both steps. Once you complete it a single time, you'll know how to do it for every Toyota vehicle! - Розваги
This is the ONLY video that explained the instructions so well and in under 2 minutes. Best part? The end results ACTUALLY worked!!! (and for the U.S. too)!!! Thank you so much for this video!! I saved the video 2 years ago and here I am again watching it in 2023 to program a new garage and it worked like a charm again!! Thank you!!!
The real MVP, the only video that explained the whole process from clearing the old data to adding your new garage door! Worked well thank you! 🙏🏼
I followed your instructions for my garage remote, and it was just as simple as you made it seem!! Thank you! I finally have it programmed! Not even the dealership was able to get it done for me!
After 10 videos and 700 tries (felt like it) in multiple days you're video worked! Thank you!
Imagine how nice it would have been to not listen to that goofy music playing in the back ground.
i know it is kinda randomly asking but do anyone know a good site to watch newly released movies online ?
@Ulises Vihaan Flixportal :P
@Lorenzo Karter Thanks, I went there and it seems like a nice service :D I appreciate it!!
@Ulises Vihaan glad I could help :)
@@23bbrandon Lol! Hello Kettle…it’s me Black
I always struggle doing these thinngs but your video taught how easy and quick can be done!! I programmed it myself, quick and without cursing the planet!!! thank you
Worked awesome on our 2019 Tundra Pro. Thanks for your video!
This also works for USa. The key thing to note here which I found other guides don't explicitly mention is that this is a two-step process, where step 2 is only required if you have a rolling course setup. Previously I kept factory resetting between step one, and step two which requires pressing learn on your garage lift.
Thank you, thank you, thank you! I have tried for several days to program my HomeLink system. Your instructions clarified the steps for me and I was successful!
Thank you for showing how to clear memory, saved me a few minutes searching the manual!
Thank you for these instructions. I found you need to follow this to the step, and clearing the memory seemed to be an important step which some Toyota instructions left out. The other key part of this is the light colors. If you don’t see those flashing to match this video it will not work. Thanks again.
Instructions in the manual didn’t work. This video was exactly what we needed to program our garage door opener. Thank you.
Thanks I was ready to scream after trying the instructions in the manual for over an hour. It was not clear that we needed to do both sequences for the remote and the learn . Maybe I'll learn how to actually read one of these days vs relying on UA-cam to save me. Great job!
Yes!!! We kept trying them individually but you have to program with the remote first, THEN the opener itself! Thanks for saying this!
The manual’s instructions suck. It doesn’t make it clear that you need to do both steps. Thanks creator of the video.
Only video that actually shows you the CORRECT WAY ! Thank you !
Thanks, the video was easy to follow and straight to the point. 👍👍
Finally got it to work, all thanks to you!
Worked great! Thanks a ton, great short and to the point video.
Worked first time!!! Thanks. Was struggling with this all morning.
SO EASY AND SIMPLE! THANK YOU!
Thank you for posting this video! It helped me 100%!
Thank you sir you video was the only one that worked for me
Thank you! I watched several other videos and they didn't work. This video was very simple and fast.
Works perfectly for my 2015 Tacoma! This is the best video out there!
Finally someone explained the proper way to program. I live in the states but this way worked for me . thanks
Thank you! Worked just like you said on the 1st method! I noticed you said Canada. Works in US too for anyone who was wondering.
It’s very helpful! My sienna worked!!!
It's funny, the USA instructions didn't work at all with the Toyotas in my family and our rolling code door. Watched this video and decided to give the Canadian instructions a shot. Both cars were paired in under 2 minutes
Thank you. This worked like a charm🎉
Watched a lot of videos. This is the only one that helped
Saving this video for later, going to try again tomorrow must have tried for an hour to pair my 2021 Camry to my garage door opener.
Sweet. That was easy. Thanks.
It’s very very helpful! on my new 2020 camry
That worked! Thanks man.
Worked for me. Thanks!
Hate the camera angle but it worked. Thanks!
Thanks! Worked with the first method on 2016 Rav4 SE
Nice this worked perfectly for my 2018 Sequoia!! Thanks. I couldn’t find it in the manual.
Thanks! Worked for me.
Thank you!! Very clear, easy instructions
Easiest way to program garage door opener, worked first try on my 2021 Toyota Sienna, this is the best video for that purpose on you tube
YOU ARE A LIFE SAVER!!!!!!
This works perfect, thank you!
Thank you sir ..I juste do what you tell and everything are Done... REALLY Happy... I just buy Tacoma 2019 and now I can use the tacoma bottom for my garage door 👍👍👍👍
Thank you
So helpful thank you so much 😊
I tried every combination without using the handheld remote -- no deal. The ONLY way it worked was by using the handheld remote to initially program the Homelink button (which was not sufficient because my Genie opener has rolling codes), then using the opener "LEARN' function to complete the process. Now all good.
Thank you! It works!
thanks man, it is worked
Thanks for helping make this a simple task...
Worked Perfect!
Great help, thanks a lot!
thanks. this was different than my 2013 Camry. got stuck after the first part.
Great vid. Thanks buddy
thank you, other videos weren't as helpful yours, I like the music, thanks
Thank you for this..
How do you get one of those portable ones that work with the door opener
I love you buddy it worked for me thank u champ god bless
Thank you so much! My mom got a new 2019 sienna and we were struggling for so long trying to get this programmed and this helped us!!
Did anyone get the amber light trying to program a rolling code with the learn button? I pressed the two outside buttons on the Tacoma to clear it until it flashed green. Then I pressed the learn button on the garage opener, it’s indicator light flashed. Back at the Tacoma I press the opener button and get amber not flashing green like in this video.
Press & hold the two outside buttons until you get a rapid green. Once that is done, press the button you'd like to program once. Then press the garage door opener next to it, repeating until the LED changes from orange to rapid green again. Then, go press LEARN on your opener. Go back to the vehicle and press the button you'd selected again and again until the door opens!
Thank you so much
It worked for 2016 Sienna. Used the first method in the video.
Thank you Brother
Thanks, for I watched other videos and could not program the remote. When I found this one, I did on the first try.
My 2018 Camry does not connect , after I press de code button , the light doesn’t turn green and it’s not rapidly flashing , it just blink like the first thing you did with the remote
Thank you.
Works in the US.**** Please note, the Learn button on the wall opener probably isn’t going to work for pairing, it needs to be the one on the actual opener.
I do not want to cancel two of my three links. I only want to change the garage door for one link. How do I do that
I'm trying to add a second garage door to mine on top of my home door. Cant seem to get this method to work.
2018 Tacoma
i have a skylink atoms i just got installed yesterday and a 2022 outback i cant even get to the first step where it flashes green aaaaaaaaaaaaa
Thanks !
Thanks 👍
Thanks 😊
Thanks
Is there a way to do it without resetting all of them
The first two buttons are programmed and dont want to loose those
Unfortunately you are only able to CLEAR ALL, as far as we know! Good luck!
When I press the two buttons the light is red! Any ideas?
Are you attempting to clear the code? Press both outside buttons and hold until the light flashes! -Justin H.
When I program the homelink my button don't flash green it stays green and don't work. I've watched every video none work for my camry. My chevy and jeep was eazy but this Toyota is kicking my ass
My gate opener uses encrypted remotes. I can access the learn button but nothing seems to work. Any suggestions please?
Did you try clearing your original codes first?
@@ENSAUTOYXE Yes. I did. The codes cleared (rapidly blinking) but I've tried adding the remote from different locations - no joy. I'm suspecting it's because it's encrypted?
Bummer. I can’t seem to get it to work. I’m wondering if it’s actually my garage door opener.
Por qué no puede haber una explicación en español?
This works in the US too.
Squared me away with my 18 Camray and new model Chamberlain opener👍🏻
Fuck me it worked perfectly. Thanks friend
Por qué no puede haber una explicación en español?????? 😭😭😭😭😭😭😭😭😭
doesn't work on my tundra 2017
On 2016 Avalon this did not work
The music is totally unnecessary to the message. It makes it hard for people with hearing issues to understand the content. Other than that it’s exactly what we need
I don’t have a learn or code button. That’s where I’m stuck.
If you don't have a 'LEARN' button on your garage door opener, it likely is not a 'rolling code' version and step #1 in the video should work for you! If not, the button may be called something different on your opener (PROGRAM, CODE, etc.)
Good luck!
ENS AUTO it was PROGRAM. Thank you!
How do I reset my cat? Trying to erase her memory and start over
Annoying music. Is that really necessary?
Background Music too loud.
cant hear what you're saying music is terrible
Music that loud makes your video distracting.
Dude, the music. wtf
Our future HOW-TO's will not have any background music!
TURN MUSIC OFF!!!
DB Cooper bruh he uploaded it already how he gonna do that
the background music is too damn loud and very distracting to learning. down vote for the music.
Dude the music is so distracting!
Get rid of the music !!! Can’t hear you
Didn’t work. Done this so many time in so many ways. Frigging 2022 and I’m wasting time on this shit
Hard to hear over the crappy music
Thanks for the instructions but, the music is too loud. Adjust the mix or lose it in the future. Not EVERYONE is 19 years old and needs music to remain interested! :)
The music is annoying and unnecessary!