This hack is brilliant. Over the last five years I've covered a local sports, event which recently came into the NFZ curtilege of a local RAF base. For the last two years I've been granted permission from their ATC to fly up to 150ft AGL for these events, so I've legitimately executed the DJI unlock process each time. It recently become stupidly impossible to do and for our last event in December last, wouldn't unlock at all. I installed this hack last night and took the drone to the event location and am pleased to confirm I got the green Ready to Fly sign on my Smart Controller. The only thing you do get is a Firmware Inconsistent message, which you have to cancel (and certainly don't hit Update). Well done Drone Hacks.
Just done this on a DJI Mavic Pro and worked no problems in Australia, still comes up on the remote "near NFZ limit" but is able to fly with no issues. Removed my GPS NFZ cost me $65 Australian dollars, well worth the money
Hi!! About DJI mini 2 Can we adjust tilting angles? which is the advanced parameter that i could adjust to change the tilt from 40° windy conditions to 35° (in cinematic mode)
Ive tested it, but i dont fly with it regularlly. My Mavic RC is extremely good, I dont need boost personally as i can outfly my batteries for signal (And am in the US, so always FCC mode)
I have one of my Mavs. running full boost mode with no problems, Other than retrieving it due to going too far a few times. It works great getting down low while at a distance. Just use caution, you WILL out fly your batt. Good Luck..
Really well done tutorial video. I'm not sure I would be comfortable changing my drone software, but it is really cool to know that it can be done. Thank you for sharing this video.
Hello pilots! An easy question... I have to pay to get a Dji mini2 firmware. I have followed the procedure as is but it won't let me load the firmware to the program! Can you please help me?
Hello! I applied the hack on my air 2 and it works great! Only one thing i wish to modify! Vertical climb speed and descent speed. Standard (4 m climb and 4 m descent) it is waaaaaay to slow. What parameters should i change? Thank you
Cool, thanks. I use your first one but lost ground detection when landing for some reason and my battery warning also did not work anymore and crashed my drone the other day. But thanks, at least I could fly higher than 500 meters... But lose signal around 1500 meters... Can we use this hack if we have hacked it already with your other hack?
FooLoui I have not use the new update and still have not bought new propellers. But the bummer is I get no low battery warning nor the warning that I need to fly back before the battery dies...
Good morning, thanks for your video, it helps us a lot to improve our drone, in the mavic pro it works perfectly, we can change all the settings but ... In the mavic air 2, we cannot change anything. Do you know the way to change parameters in this model? Do i need a membership to be able to change the height limit to the dji mavic air 2? What do you think about this? Regards my friend.
So if you bought a drone that was firmware updated through DJI in the last year....let’s say it’s a mavic pro version 1 running 01.04.0500 firmware, will this drone hacks software give you the mods? Does this actually defeat DJI’s anti roll back of firmware?
Mavic Mini: The RC boost is working very well. Test it at open field without signal lost (battery was a problem). The next day i did also the FCC hack with RC Booster (i run the latest firmware on drone and the latest version of the app). Got more than 7100 meters without signal lost and a 34% battery left (back and forth).
@@rockya5173 I mean that if the battery was bigger i could go further. The only problem with the boost i presume must be the battery life of remote control. That's where the boost is.
@@digdat0 Yea, I hear ya. I remember you getting the restaurant. Dam, its too bad... Covid has killed the food service biz, shitty timing huh... Good to see u pop up once in a while. Hope you & your fam are all good.. Great App!!
pretty honest german deelopers without the usual "best of the market blabla" but rocksolid comparisons and fair descriptions od what they can do and what not foe each model and its dozens of firmwares. For example on the FAQ site drone-hacks.com/faq regarding Whats the difference between BOOST and FCC mode they simply tell you straight away that their solution for the european CE Mini - at least for now - does not match or reach the results of the fake gps hack. That is damn fair as the pricing for Mavic 2 or Pro, pretty expensive drones where buyers usually wants the best and are willing to pay the most: they say that they currently can only offer the boost + fcc hack and therefore the price is 20€ not 30€ or 40€ you pay what you get and also gain access to the huge parameter or solution "store" Really good website on a PC, but on an androd phone even latest and greatest with 7 inch screen you do not get what you can see on a Laptop or PC so avoid tablet and co and start your pc or laptop if you wann discover this website cause you can learn a lot like the RC1A and RC1B remote conrollers that came with the Mavic 2 Pro. but I have not find my most wanted hack: volume control of the Mavic 2 Remote Control like the annoying battery warning or loud home point updated. Maybe it is part of the parameters but I did not find the WIKI mentioned in this video about the 1200 to 1500 parameters that I might be able to control.
the app is not working properly on mu MacBook air, the drone is connecting but the green bar is not showing, cannot change any parameters....any help ?
Hi, I bought a regular license for Phantom 4 pro and I updated the drone to the latest firmware but I don't know how to update the smart controller ...?
Where can I find that wiki mentioned in the video regarding that parameter solution ? I simply can not find it on the website - or I and google search are a bit blind cause even google search "wiki site:drone-hacks.com" shows no result.
Don't know if DH can override, or downgrade firmware that has updated with anti-rolback 🔒 that DJI implemented. Nolimitdronez with the latest version on app 2.0 and 2.1 can't overcome this at all.
i see no evidence that boost mode does 1.8 watts.. no scope no multimeter profing dbm output etc.. i see no proof it changes fcc to ce or visa versa....
Hi, do I need to buy license to change parameter on MA2? I downloaded DH, the parameter change seemed to be available in free version, it actually wrote the parameter I changed to the drone, but it had no effect on my drone. Is there something else I need to do?
Evere find an answer to this ? Want to change parameters on my Mav pro , and downloaded free Drone hacks , but want to know if this is something you would have to pay for ? Also this video shows the drone hacks website , but it has been changed and you dont get the same sub windows as Steve is getting ( :52 ) .
@digdat0 Where is this, what the new Param name in P4P v2 g_config_go_home_gohome_idle_vel battery_type g_config_landing_auto_landing_vel_L1 g_config_landing_auto_landing_vel_L2
Hi, In India, they are blocking the max height to 15 m for mavic mini series drones. Tried modifying, g_config.flying_limit.max_height value above 15. But everytime internet is connected or dji fly app is opened, it resets back to 15. Is there any other parameter we can update to prevent this? Any help will be really appreciated!
@@AgniesMT I did not buy the mini 2 because I’m more concerned with image quality, don’t get me wrong, the mini series image quality is great but not as good as my mavic pro 2 with the hasslehoff camera..
Did you login to the app? I find you need to have the aircraft connected to the computer and on, then open the app .. login, and once logged in, it will verify license on the account.
@@kiripap2018 Download Fake GPS, find s location in US, save it for future use, then open Google Map, new US location is now positioned. Now you can turn on Dji Go4, FCC activated.
I saw you video, bought the regular license, and off i went. now i was mix modded before i started. So followed all the steps, upgraded firmware to 1.04.0500 throught the Drone-Hacks app, all went fine, but when i select the mods on the second page, namely FCC plus customFC, i get error failed to prepare Custom FC, start process again. Also if i try only FCC mode, failed to etc message and i can not make any mods as advertised. paid 35 euros for this, and its not working. Any suggestion other than the obvious.
ive turned on the drone and the app shows me to be still in CE mode. in the mix mod id done earlier, i used the jackson FCC mod which gave me both FCC and boost at 2.5ghz and when i opened ate app while connected to the craft, it showed me to be in FCC and sure im going up to 4miles on stock antenna. now i cant even apply that. Please reply.
This hack is brilliant. Over the last five years I've covered a local sports, event which recently came into the NFZ curtilege of a local RAF base. For the last two years I've been granted permission from their ATC to fly up to 150ft AGL for these events, so I've legitimately executed the DJI unlock process each time. It recently become stupidly impossible to do and for our last event in December last, wouldn't unlock at all. I installed this hack last night and took the drone to the event location and am pleased to confirm I got the green Ready to Fly sign on my Smart Controller. The only thing you do get is a Firmware Inconsistent message, which you have to cancel (and certainly don't hit Update). Well done Drone Hacks.
Just done this on a DJI Mavic Pro and worked no problems in Australia, still comes up on the remote "near NFZ limit" but is able to fly with no issues. Removed my GPS NFZ cost me $65 Australian dollars, well worth the money
Thx but, i miss the good old times where u explain how we can tweak all this without buying external Software
dont we all
Greetings. Tell me, will there be a height hack on dji mini 3 pro?
yes
Glad to see you back. Love your work.
Does this work on the mavic mini 2?
Hi!! About DJI mini 2 Can we adjust tilting angles? which is the advanced parameter that i could adjust to change the tilt from 40° windy conditions to 35° (in cinematic mode)
Great video 👍🏽 But... 1 question 😉 Do u try Boost Max Mode on your DJI Mavic ?
Ive tested it, but i dont fly with it regularlly. My Mavic RC is extremely good, I dont need boost personally as i can outfly my batteries for signal (And am in the US, so always FCC mode)
I have one of my Mavs. running full boost mode with no problems, Other than retrieving it due to going too far a few times. It works great getting down low while at a distance. Just use caution, you WILL out fly your batt. Good Luck..
7:30 and maybe disable the bottom LEDs or enable attitude mode/disable GPS or VIO
Really well done tutorial video. I'm not sure I would be comfortable changing my drone software, but it is really cool to know that it can be done. Thank you for sharing this video.
Excellent and very helpful video! Thank you
Do you connect the controller or drone to do the boost mod
Great video. Can’t wait for Mac support...
Glad to see you back @digdat0 !!!
Great video! I love the freedom! FCC Boost sounds interesting.
Will this take away the warranty?
Hello pilots! An easy question... I have to pay to get a Dji mini2 firmware. I have followed the procedure as is but it won't let me load the firmware to the program! Can you please help me?
Hello! I applied the hack on my air 2 and it works great! Only one thing i wish to modify! Vertical climb speed and descent speed. Standard (4 m climb and 4 m descent) it is waaaaaay to slow.
What parameters should i change? Thank you
Can i downgrade Mini 2 to 1.309 if i bought it with 1.5?
I have the same mini 2
But why you want to downgrade ?
@@AredaMohammed to hack it
Will this work DJI drones so we don’t have to worry about the ID that DJI is coming out with?
Can you set the AEB EV-range in the advanced parameters? So you can take photos with much larger EV-difference when auto bracketing?
Cool, thanks. I use your first one but lost ground detection when landing for some reason and my battery warning also did not work anymore and crashed my drone the other day. But thanks, at least I could fly higher than 500 meters... But lose signal around 1500 meters... Can we use this hack if we have hacked it already with your other hack?
Lol
Do you still get those errors?
FooLoui I have not use the new update and still have not bought new propellers. But the bummer is I get no low battery warning nor the warning that I need to fly back before the battery dies...
@@ekphotography also can you remove the software from the drone? And what drone are you using?
hi thanks for your work, Can you tell me what are the best setup parameters to apply on mavic air 2 ?
all to maximum set
Very nice :). Can I boost my CE mavic mini range using this software?
What do you have for the dji phantom 3 standard?
Good morning, thanks for your video, it helps us a lot to improve our drone, in the mavic pro it works perfectly, we can change all the settings but ... In the mavic air 2, we cannot change anything. Do you know the way to change parameters in this model? Do i need a membership to be able to change the height limit to the dji mavic air 2? What do you think about this? Regards my friend.
So if you bought a drone that was firmware updated through DJI in the last year....let’s say it’s a mavic pro version 1 running 01.04.0500 firmware, will this drone hacks software give you the mods? Does this actually defeat DJI’s anti roll back of firmware?
So to change the boost mode you plug in aircraft? Or the controller.....I take it this is for the aircraft only.
Still it can not be done on Mavic 2 Pro to remove NFZ with latest Firmware !!
Correct, still no NFZ removal for M2 and no height removal either. Hopefully one day!
Mavic Mini: The RC boost is working very well. Test it at open field without signal lost (battery was a problem). The next day i did also the FCC hack with RC Booster (i run the latest firmware on drone and the latest version of the app). Got more than 7100 meters without signal lost and a 34% battery left (back and forth).
Did the boost effect the drone in any negative way?
What do you mean battery was a problem?
@@rockya5173 I mean that if the battery was bigger i could go further. The only problem with the boost i presume must be the battery life of remote control. That's where the boost is.
Into the BirdMap, for Mavic Pro do you meen also Mavic Platinum?
When I try to follow the instructions, DumlDore won't run with DJI assistant open. Any idea's why?
Where the hell you been hiding? LOL..Good Job!
family, covid, sold restaurant, back to desk job. Been waiting for a good app to come out :D
@@digdat0 Yea, I hear ya. I remember you getting the restaurant. Dam, its too bad... Covid has killed the food service biz, shitty timing huh... Good to see u pop up once in a while. Hope you & your fam are all good.. Great App!!
Dji mini 2 is availabe or no ? Thank you all
What about raw photos? Is it posible for Mavic Mini?
pretty honest german deelopers without the usual "best of the market blabla" but rocksolid comparisons and fair descriptions od what they can do and what not foe each model and its dozens of firmwares.
For example on the FAQ site drone-hacks.com/faq regarding Whats the difference between BOOST and FCC mode
they simply tell you straight away that their solution for the european CE Mini - at least for now -
does not match or reach the results of the fake gps hack.
That is damn fair as the pricing for Mavic 2 or Pro, pretty expensive drones where buyers usually wants the best and are willing to pay the most: they say that they currently can only offer the boost + fcc hack and therefore the price is 20€ not 30€ or 40€
you pay what you get and also gain access to the huge parameter or solution "store"
Really good website on a PC, but on an androd phone even latest and greatest with 7 inch screen you do not get what you can see on a Laptop or PC so avoid tablet and co and start your pc or laptop if you wann discover this website cause you can learn a lot like the RC1A and RC1B remote conrollers that came with the Mavic 2 Pro.
but I have not find my most wanted hack: volume control of the Mavic 2 Remote Control like the annoying battery warning or loud home point updated. Maybe it is part of the parameters but I did not find the WIKI mentioned in this video about the 1200 to 1500 parameters that I might be able to control.
at 10:30 , what it the wiki page he said that he was going to put in the comments , but never did ?
Can you enable Horizon Mode on DJI FPV Racer?
Is there any way to make my drone undetectable to aroescope and other drone detections system
Any idea when mac os will be supported???
They had a build but had some issues, id expect in a few weeks.
How does this affect future firmware updates for any drone?
the app is not working properly on mu MacBook air, the drone is connecting but the green bar is not showing, cannot change any parameters....any help ?
I pay for the lite license around 25€ can i cancel it?
Hi, I bought a regular license for Phantom 4 pro and I updated the drone to the latest firmware but I don't know how to update the smart controller ...?
Can I take photos to RAW on DJI Mavic MINI 1? Some tricks? How to?
you are great sir
hi, i'm interresting but i want know if it s possible change altitude for my mavic mini (more than 500m) plz, thx
no way, not possible for mini
Most important gimbals's serial number pairing is not implemented!!! One has to send it to DJI service and pay 20US$...
Cool. Thanx
it works for DJI GO too? Or only DJO GO 4? I would like to test it with my Dji A3 PRO fc
I do not believe the app supports a3. This process *may* work for the a3, untested. dji.retroroms.info/howto/install_modded_m100_m600_fw
@@digdat0 do you mean that could work with N3 or A3? (wich uses the same DJI GO app!)
is there a way to buy the licence to disable the NFZ on the DJI N3?
Good evening, it is possible for me (dji mavic air 1) to lower the flashing from 620 to 500, is it possible?
Can I enable a permanent boost mode on my DJI mini 2 and the DJI Fly app using this?
Where can I find that wiki mentioned in the video regarding that parameter solution ?
I simply can not find it on the website - or I and google search are a bit blind cause even google search "wiki site:drone-hacks.com" shows no result.
Can you change camera settings? Sharpness/Contrast? (Mavic3)
Is there any way to keep 5.8/dual on with fcc hack in Russia or another country where the 5.8 is forbiden?
Nice layout of the software but wont be able to FCC my 2 birds. Guess I will just have to wait.
support ticket with details and maybe the guys can address that
Is there anything new and cool in Mavic Pro firmware version 500 as compared to 300?
hi, is it possible to hide the remote id or disable it?
Will this work to remove the 15 meter height limit which is by default on the DJI Mavic Mini 2 drone in India ?
Were you able to get any more info on this?
i have phantom 4 pro v2.for fcc mode must connected rc and drone?
Hi , does this app help me remove the height limit for Mavic 2 pro ?
what flight controller do i use any version of dji go works?
Don't know if DH can override, or downgrade firmware that has updated with anti-rolback 🔒 that DJI implemented. Nolimitdronez with the latest version on app 2.0 and 2.1 can't overcome this at all.
It not showing the mods when you download the app on the left what should I do
Hello, drone hacks doesn’t detect my mini 2. Any help please. Windows 10
Very cool thanks!
Awesome job
Did u have problems with firmware 01.04.0500 u finished with 01.04.0300
Software says customFC removes altitude limits but I do not see an option to do so.
i see no evidence that boost mode does 1.8 watts.. no scope no multimeter profing dbm output etc..
i see no proof it changes fcc to ce or visa versa....
Plz tell me name of websites where i find parameters name and to edit and name of websites
Hello;
Can you help me setup mavic pro on drone-hacks?
Please do an update for this video as I have the mini 2 and would like to know if this is supported, thanks
Yes this is supported for mini 2 just ordered it myself and also can be used to put in fcc via phone but Android only.Hope this helps.
Tried to download it but Norton keeps quarantining it. Flagging up as WS Reputation 1
Same here. I had to restore and then trust the file. Norton is over sensitive (I know, I used to work for them!)
which hack for the MINI 2? i will pay a lot to remove the nfz
Hi, do I need to buy license to change parameter on MA2? I downloaded DH, the parameter change seemed to be available in free version, it actually wrote the parameter I changed to the drone, but it had no effect on my drone. Is there something else I need to do?
Evere find an answer to this ? Want to change parameters on my Mav pro , and downloaded free Drone hacks , but want to know if this is something you would have to pay for ? Also this video shows the drone hacks website , but it has been changed and you dont get the same sub windows as Steve is getting ( :52 ) .
@digdat0
Where is this, what the new Param name in P4P v2
g_config_go_home_gohome_idle_vel
battery_type
g_config_landing_auto_landing_vel_L1
g_config_landing_auto_landing_vel_L2
Fcc boost works a treat for MP2. 4 miles distance . (out to sea)
Everything goes 4 miles over water :p
@@foam27
Yawn 🥱
removing altitude limit option is not yet available, sadly
i connect my mini 2 but its now showing in pc plz help
So is this going to be better then superpatcher 2.0?
Drone hacks program doesn’t give me the option to change the maximum speed feature, anyone know why?
Hi, can you please provide me to get the regular license
Hi, In India, they are blocking the max height to 15 m for mavic mini series drones. Tried modifying, g_config.flying_limit.max_height value above 15. But everytime internet is connected or dji fly app is opened, it resets back to 15. Is there any other parameter we can update to prevent this? Any help will be really appreciated!
Only option is to buy regular license in 40 euros i also buy for mini 2
Use the other app. Not the Dji official one.
Still no Mac and no more beta testers accepted. Hopefully Mac version will be fully tested and released soon!
Thanks. Can I hack drone agriculture DJI?
Is it possible to remove NFZon the mavic mini with this program
whi in birdmap there is not sparq? in the clip there is.
Good thing only after sending my drone for repair they replaced it, now I can't use drone hacks no more as it recognized the old drone serial number.
Is there a website to disable NFZ on a Mavic mini??
Bro can you remove height limit of 15m in india by doing this
Were you able to do it?
Steve, what up. Good stuff man. Thanks. I'm still in Eugene if you want to hook up. Cheers
I changed the parameters on the mavic mini for more speed, greater tilt, faster up and down and it doesn’t seem to make a difference?
Have same issue with MA2
@@AgniesMT I did not buy the mini 2 because I’m more concerned with image quality, don’t get me wrong, the mini series image quality is great but not as good as my mavic pro 2 with the hasslehoff camera..
do you have xiaomi mi 4k ?
I see they have a public beta release for Mac. Has anyone tried it yet?
I bought the license but they won’t apply to the drone or app any information on this
Did you login to the app? I find you need to have the aircraft connected to the computer and on, then open the app .. login, and once logged in, it will verify license on the account.
can i mod current version of mavic 2 pro to NFZ hack
Is the free hack mod, include a way to increase speed??
You can do all these yourself in dji Assistant 2, including FCC.
Yes you can, the free version allows changing all parameters.
@@letgetloud how you enable fcc through dji assistant?
@@kiripap2018 Download Fake GPS, find s location in US, save it for future use, then open Google Map, new US location is now positioned. Now you can turn on Dji Go4, FCC activated.
@@letgetloud But this is not the way to enable fcc through dji assistant.
Will one be able to go back to DJI firmware afterwards?
I would love to know as well
If you didn’t get an answer yea you can.
I saw you video, bought the regular license, and off i went. now i was mix modded before i started. So followed all the steps, upgraded firmware to 1.04.0500 throught the Drone-Hacks app, all went fine, but when i select the mods on the second page, namely FCC plus customFC, i get error failed to prepare Custom FC, start process again. Also if i try only FCC mode, failed to etc message and i can not make any mods as advertised. paid 35 euros for this, and its not working. Any suggestion other than the obvious.
ive turned on the drone and the app shows me to be still in CE mode. in the mix mod id done earlier, i used the jackson FCC mod which gave me both FCC and boost at 2.5ghz and when i opened ate app while connected to the craft, it showed me to be in FCC and sure im going up to 4miles on stock antenna. now i cant even apply that. Please reply.
The website drone-hacks is no more accessable. Whats going on here.!!!!