MAZDA CX-7 OIL PAN REMOVAL OIL LEAK FIX Mazda CX7

Поділитися
Вставка
  • Опубліковано 11 січ 2025

КОМЕНТАРІ • 30

  • @WorldMechanics
    @WorldMechanics  5 років тому

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
    ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

  • @woodysapper7
    @woodysapper7 Рік тому

    Awesome, I'll be doing this tomorrow. Get it done. Awesome videos you have done

  • @jercyvz6848
    @jercyvz6848 4 роки тому +1

    Guys thank you very much! I thought that it should be gasket but in fact - no.

  • @alexhoang7286
    @alexhoang7286 Рік тому

    yes putting back on can be troublesome. The passenger side of the oil pan is actually on the side and not the top of the pan to use gasket sealer. This makes it tricky.

  • @pingpong9656
    @pingpong9656 Рік тому

    Can you remove the transmission oil pan and the engine oil pan as easily on the AWD model? Does that version have a transmission filter...

  • @billnowack5390
    @billnowack5390 Рік тому

    Hi I am working on my 2008 Mazda Cx7 because it through a p002 code the oil control valve so I tore off the valve cover and replaced it along with the new gaskets put it all back together and it’s still knocking a little from the bottom end but no light. If it is a bad rod bearing can I replace them from going up through the oil pan or what do you think it might be

  • @bryanroman1462
    @bryanroman1462 4 роки тому +4

    It would be nice if you showed the process of putting it back together.

    • @tylersmity100
      @tylersmity100 3 роки тому +1

      yep and gave what tools and torque specs in one video

    • @charlesstpierre8
      @charlesstpierre8 2 роки тому +2

      Yeah the removal process seems pretty straight forward but in fact the not so easy part that has me scratch my head is the application of RTV and installation process.

  • @francismbulo
    @francismbulo 5 років тому +4

    How did you put it back

    • @Jossienheimer
      @Jossienheimer 3 місяці тому +1

      Clean the mating surface with a plastic scraper and brake cleaner, applying a uniform bead of rtv along the surface, hand tighten the bolts, let set for an hour n torque to spec after. let set for 24hrs before operating. When aligning the gasket use studs to line the oil pan in place

    • @francismbulo
      @francismbulo 3 місяці тому

      @@Jossienheimer finally the answer after four years 😂🤣😂. How are you?

  • @timdekker8776
    @timdekker8776 4 місяці тому

    I have by the sensor crank as. 6 schrews in the oil pan

  • @sergioortega5869
    @sergioortega5869 3 роки тому

    Hello, good afternoon. I can ask you. that oil leak. It's what my car has and it takes smoke out of the exhaust. and more when I have it on without moving for more than 10 minutes and it begins to release white smoke. and it throws oil they did a cleaning of the engine some time ago and that caused more oil leakage today I put anti-milking and it seems to have not 100% results but if that work helps a little what is the price for the labor

  • @joejoewelch2363
    @joejoewelch2363 4 роки тому

    Nice OU hoodie

  • @pingpong9656
    @pingpong9656 Рік тому

    Is there an O ring on that tube? Did not see it...?

  • @UK5855
    @UK5855 3 роки тому

    Hi , I have a CX-7 2.2 Diesel from 2011 and its different. I replace it with a second one , but because it didn't looked so good i painted it both sides . I used a polimeric paint (PEABAX TCE-A) with heat resistance up to 170 degrees Celsius . Do you think there is a problem with that ? thanks ;)

    • @UK5855
      @UK5855 3 роки тому

      its more like a cover very thin. The size is like both hands together (well , slightly bigger :) )

  • @charlesstpierre8
    @charlesstpierre8 2 роки тому

    Thanks for the removal but why not put a video for the more important part which is the reinstallation process with gasket making. Having to squeeze the oil pan between the timing chain cover and transmission is surely a problem with fresh silicone applied. I'm not doing this job now, no way!

  • @paulklt
    @paulklt 5 років тому

    I was hoping you will do timing chain, head gasket and piston rings change but you didn't go too mechanical on this car i guess.

  • @racoro1975
    @racoro1975 5 років тому

    hi, tha car is 2.3 gasoline or diesel?

  • @christophercates5257
    @christophercates5257 5 місяців тому

    Why wouldn't y'all show how to reinstall and how to run the silicone, how to refit and what order to put bolts back in and what torque specs to tighten them all down bc there is a proper order and procedure for these.

  • @aneeshmathew1805
    @aneeshmathew1805 2 роки тому

    I have a 07 Cx7 and my engine sounds like a deisel engine ..... it is not Diesel and is a 2.3 ..... so you know why is this happening ?

    • @cosmicdreams7529
      @cosmicdreams7529 Рік тому

      Mine sounds like this too… and gets worse as the oil gets old.

  • @BrayanLopez23
    @BrayanLopez23 3 роки тому

    This have no gasket from OEM or someone removed it?

    • @Soda413
      @Soda413 3 роки тому +1

      It uses RTV no rubber gasket

  • @robj.mazzacone8158
    @robj.mazzacone8158 5 років тому

    Is there a difference with turbo and four wheel drive

  • @frankzee111
    @frankzee111 2 роки тому

    That's a 2.3 turbo oil pan

  • @aneeshmathew1805
    @aneeshmathew1805 2 роки тому

    I have a 07 Cx7 ....the car