This One Simple Trick Will Help You Fit Massive Tires On Your Truck.

Guys I’m tired of seeing people hacking up their trucks to fit wheels and tires. I show you how to do it clean, and it’s actually super easy.
⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️
Get This exact same lift for your truck here ⬇️⬇️
www.amazon.com/dp/B0156T83UI/...
⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️
Here’s the exact tire and wheel setup I’m running on my truck⬇️⬇️
Atturo Trail Blade M/T (33x12.5r20)
www.amazon.com/dp/B0853FWJC2/...
Ultra Motorsports X111 Gloss Black 20x12 (-44mm offset)
www.amazon.com/dp/B07PNJTP64/...
Thanks for watching!

[@tanerhansen4428]

If you are wanting to support the channel and get yourself an awesome bumper check out my website!
voltageoff-road.squarespace.com

[@jhh243]

Great video brother; i think im going to try it!

[@FlowState]

Appreciate the video!

[@verdIblanco]

Did you put on some lift kits? for the front tires if so what is the height?

[@futurefunk88eddins96]

Thats me and baby brother in the parking lot he has a black widow gmc i have a lifted avalanche.

[@Anthony-du3he]

Man you’re talking about 33s like its something I’ve taken stock Silverado put some 2 inch level on the front did a Norcal and a bumper trim and fit 35s… only time it rubs is when I hit a bump going around to turn

[@coryt-notctk6822]

Is that factory suspension

[@jayswindle9860]

what size lift is on your truck

[@PRGuanica]

I have a 2008 GMC Sierra, and I want to raise it up 3 or 4 inches with 33 inch tires. Do I still need to cut the fender and bumper?

[@tanerhansen4428]

Depends on the offset of the wheels but most likely yes. My dads gmc has a 6 inch lift with 33s and his rubs a little at full lock.

[@jaxmichaels1061]

i just got 12 wide 33s on my 08 with a 3 inch level with -44 offset and they don’t rub terrible once you drive for a bit the insides of the fenders will bend in

[@RUBICON-zu6wl]

Lift kits work well also!😂

[@gregwhitford9684]

That’s what I’ll do: lift kit, don’t want to cut into my truck!

[@markhenley8944]

Does you truck have a lift

[@imnothing27]

Just got a set of 35s...I have a bone stock 88 chevy 2wd....don't hate me the 2wd was cheap...with 80.000 miles on it...anyway..what size lift do I need to get...all the ones I can find cost more then the truck..lol

[@fbarr8540]

Get a 3.5 level kit. Some trimming in the front and presto

[@bradywelsh7705]

I’m on a 3 inch level on my 2010 Silverado and I just bought 20x12 -51 what will I have to do?

[@reaganriddle1583]

Depends on tire size. I ran 20x12-44s on stock suspension on a rwd 2010 ranger. The difference is I ran a 295/40s instead of 33s.

[@bradywelsh7705]

@@reaganriddle1583 I’m running 33x12.5

[@allmountain5334]

That beard, brutal bro. Let's trim that bad dog off after the fenders.

[@jacobkinnison6228]

what brand lift did you put on?

[@tanerhansen4428]

Motofab. There’s a link to it in the description

[@averageCitizen5150]

Just put a self tapper it's all good lmfao

[@ExploringCabinsandMines]

Heat with heat gun and push plastic liner in.

[@bitty4770]

Would that be an alternative to cutting the liner?

[@ExploringCabinsandMines]

@@bitty4770 yes

[@m1cajah]

Before or after cutting off the fender and beating it back?

[@markcherry6513]

What’s the offset on those 20x12

[@tanerhansen4428]

-44mm

[@YunGGinxTD]

For the sake of god 20s are SMALL

[@tanerhansen4428]

Drop your best “your mom” joke, I’ll pin my favorite one!

[@DJTruth_1970]

you really should get off the moms, i just got off yours...

[@suspiciousninja1220]

i wold never butcher my truck like that

[@brianflynn5491]

Lol