Hello can do the same thing to a building without structural designs cos I want to introduce columns throughout the building and also Beams. But with this video I got knowledge on what to do after the introduction of columns and the top bar to round the building. Is it proper cos it’s. Not new building but exist one that needs to be converted to place of worship . For a long years of uses and Good result of Stability and integrity so what’s your take over this
Sir ager total beem 36 ft hy awr drmyan main 2 column hy tho hr column kr beech may cross beam daina hoga ya 36 ft may awr kitny sother ka sarya use krna hy
In Another Of Your Lecture, Depth Of The Beam U Have Mentioned There Is D/12.... But In This Video, Depth Of Beam Formula Is D/12... How The Difference DId Happen?
Finally I got to clear my doubts by watching your video brother...✌️😊 I was very confused in that both methods that you explained... Thank-you and keep going ✌️✌️😊
Greetings! Sir, how many nos of extra bar we need, the placement of Xtra bar, and it's length? Is it OK if I will use 6 nos of 16mm dia (2 nos on top and bot, 1 on each side left and right). Thank u.
Mr. Sammi please explain,, In the other video with a span of 25 ft you stated L/16, but you never explained why.. so L/16 for 25 ft and L/12 for 13 ft,?? Why?
In which situations 2nd method is used sir ,generally crank will ne provided alll kinds of beams soooo why the crack didn't provided in 2nd method ,,any reason behind that sire
How many number of steel bar to provide at 1m depth beam and 250mm width
And for the columns how many steel bars for the bungalow columns that will Carrie’s the Beams for the building stability
Hello can do the same thing to a building without structural designs cos I want to introduce columns throughout the building and also Beams. But with this video I got knowledge on what to do after the introduction of columns and the top bar to round the building. Is it proper cos it’s. Not new building but exist one that needs to be converted to place of worship . For a long years of uses and Good result of Stability and integrity so what’s your take over this
UNFORTUNATELY YOU WERE EVEN UNABLE TO PROVIDE US A CLEAR DRAWING. IT IS NOT POSSIBLE TO UNDERSTAND YOUR DRAWINGS, PLEASE.
Sir how about the design of Arc beam? Pls kindly make video for RC Arc beam
Sir ager total beem 36 ft hy awr drmyan main 2 column hy tho hr column kr beech may cross beam daina hoga ya 36 ft may awr kitny sother ka sarya use krna hy
Please the explanation about the distance between the columns and the number of steel bars is not clear
Sir bream hight formula for l/16or l/12 please clarify sir
Can you please in the next videos, have examples in meter centimeters, and feet, inches. Thank you
Is depth of beam or thickness, depth of beam is that part below the slab
Thanks for the lecture, but in ur previous class u said depth of beam is L/16 now u saying its L/12?
IM CONFUSED TOO
yeah, the numbers keep changing from video to video.
I think It depends on the support of the beam. Let say fixed support or pinned support.
@@charmeinbelacse3190
@@charmeinbelacse3190 p0
In Another Of Your Lecture, Depth Of The Beam U Have Mentioned There Is D/12.... But In This Video, Depth Of Beam Formula Is D/12... How The Difference DId Happen?
You meant L/16
Finally I got to clear my doubts by watching your video brother...✌️😊
I was very confused in that both methods that you explained...
Thank-you and keep going ✌️✌️😊
Sir, what will be the sizes of vertical post if the distance between two post is 14'×12'?
depth of column = L/12 or L/16 correct
Thanks for d video, pls showing practical reinforcement on site about these your videos will be very helpful
U urself dnt know much abt str sir
how about the ground beam, sir
What about width of the beam?
Greetings! Sir, how many nos of extra bar we need, the placement of Xtra bar, and it's length? Is it OK if I will use 6 nos of 16mm dia (2 nos on top and bot, 1 on each side left and right). Thank u.
nice video..can i ask what size of deformed steel bars will you use for RC beam like this or if beam spans 8 Meter?
Always amazing and good learning vedios , may Allah increase you in knowledge
Ur writing is not exiplict.
Whr tension is more @ bottom
Sir where did you get 12
Size of steel bars????
instead of bent-up bar or pieces of top and bottom extra bars, can we provide full length of top & bottom extra bar?
2nd method only 4 bars to be used? your explanation not clear, any additional support bars to be provided ?????
Salam brother. ..nice presentation.
How can we take distance between columns....
Just explain the things in pushtu urdu too plz
The length of cranked portion of the bar is wrongly shown. It must be 1.42 D and not 0.42 D.
😊 But I think you fotgot to explaining the diameter=of the 4 botom and 2 top steel bar in nr(?)
Yes
Did you create a supplement to address the rebar sizes in the column ?
What is L/ 12?
explain it
(L) Length of clear space between the 2 columns, (divided) by (12)
L/12
Mr. Sammi please explain,, In the other video with a span of 25 ft you stated L/16, but you never explained why.. so L/16 for 25 ft and L/12 for 13 ft,?? Why?
Good question Dhamu
In which situations 2nd method is used sir ,generally crank will ne provided alll kinds of beams soooo why the crack didn't provided in 2nd method ,,any reason behind that sire
THANK YOU SO MUCH FOR THIS LECTUTRE
👍🤝
Iam civil Draughtsman now Iam Underwood how to rod bending in beams .Thank you .
d depth should be from top of beam to the center of bottom main bars not at the bottom of beam..that's the rule.
L/12. Why divided by 12. Thumb rule i guess
Crank bar for only top beam breadth or both breadth and length?
Sir
Project manager
Roles&responsibility
Guide video
Hello and how are you? im a learner and im learning from you. I love you teaching very much.
Thank sir good information doubts cleared
Sir thanks for your class if the room space 18ft in 3 store house what is the beams size and columns size and footage
Hello...Can you tell how to fix a leaning wall that has been caracked from its post . Thanks
Thank you very much. This information really helped. My bush architect has done it correctly
Where did u get the number 12 in formula D=L divide by12? Is it constant value?
My exact thought as well. Any answer regarding this question?
Gudday Sir what if crossbeam 5meters and 6meters how to find
5+6 THEN DIVIDE BY 2
বাংলায় চ্যানেল চাই ।
বাংলাদেশ হতে ।
in your other videos you said that the formula of depth of beam is L/16?
This guy confuse his viewer, yes you are right, other videos he used 16
Thanks, I've gained a lot
آپ کا ویڈیو بنانے کا طریقہ بہت ہی بہترین ہے
INDIA
Assalam.i.alaikum Sir site Layout kea video banao
If we should be used 16mm dia on base if beam then top we use 12 mm what they effect
Thank u sir.. sir i would like to ask u why do we need crank bar in a beam?
sir pl u informed L/4 WHAT IS UNIT OF L METER , FOOT
Mtr
Nicely Explained
sir u said the how find out the depth iof the beam but u not said how to find out the width or breadth of the beam..?
it's 2/3 of the depth (was in another of his videos)
Dia of bars in beam not explained
Waaleikum salam wrhmtu_Allah wabarakat bro
Thanks for Teaching ✌🏻😊
Sir please about roof stell structure and reinforcement
Thanks sir ur excellent explanations👍❤
Allah te nagradio bro ❤️
Nice explain thanks for information
Nice thank you sir❤️❤️❤️💐💐💐
Very useful. Thanks
How do we come up with the wide of the beam
Excellent video sir. Thnx a lot
Asalam malikum brother
Super sir
Sir whats app pe massage send kiya hai maine
But sir I am from INDIA
writing so small too read
thank you so much.😍😍
Thank u so much sir..
12 is cm?
Please take measures in feet and inches... not in meters and cm...it will be easy for listener to imagine while you explain...
thank you.
سر اپنے جو یہ ویڈیو بنایی ہے یہ میٹر میں ہے اسکو فٹ کے حساب سے کرنا ہوگا تو کیا کرونگا
Thanks so much from Rwanda
Great teaching, and with such clarity
I realize it is kinda off topic but do anybody know a good place to stream new movies online?
Fantastic
You are doing good work
what is dia of steel bar
Diameter of steel bar... Radius and diameter
thanks
You discuss the depth of beam as d/12 what about the breath of beam or the width of beam..
Hindi hindi hindi plz
What is the full meaning of RCC?
Reinforced concrete column
Reinforced Cement Concrete