How to calculate the depth and width of a beam? | How to design a beam by thumb rule? | Civil Tutor
Вставка
- Опубліковано 29 чер 2024
- Download our android app for job oriented courses
clpsheldon.page.link/x3kb In this lecture, I have discussed how to calculate the depth and width of a beam and how to design a beam by thumb rule?
quantity surveying topics compiled PDFs 👇🏻👇🏻
store.civiltutorofficial.com/
SFD & BMD PDF
store.civiltutorofficial.com/p...
2nd channel 👇🏻
/ civiltutorofficial
Beams are the horizontal members of a structure which are provided to resist the vertical loads acting on the structure. So in order to maintain the efficiency of a structure, it is necessary to provide the proper size of a beam to resist a given set of loads. The size of a beam i.e., Depth & Width depends on the length available for casting the beam.
For calculating the depth of a beam using the thumb rule, we use the formula;
Depth of Beam = L/10 to L/12
Where L = Clear span of the beam.
By the term ‘’clear span’’ we mean the column inner to inner distance.
Must-have books for Civil Engineers;
The A to Z of Practical Building Construction and Its Management
amzn.to/3HKmjm9
Building Planning and Drawing
amzn.to/3sPztdA
Illustrated Design of Reinforced Concrete Buildings ( Design of G+3 Storeyed Buildings + Earthquake Analysis & Design)
amzn.to/3tD9aGq
►DISCLAIMER
The information provided in this video is for educational purposes only. The viewer is solely responsible for verifying the information and the use of the information in this video is at the viewer's own risk. The content is not intended to be used for professional or commercial purposes. The application of the information presented in this video on a construction site should be carried out only by a licensed and qualified civil engineer.
This video may contain copyrighted material the use of which has not been specifically authorized by the copyright owner. However, under Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
Advanced Reinforced Concrete Design
amzn.to/3IRZwGn
Limit State Design of Steel Structures
amzn.to/3pIk1O6
Estimating and Costing in Civil Engineering (Theory and Practice)
amzn.to/3IWcwLq
#civiltutor #beamdesign #thumbrule
Quantity surveying topics compiled PDFs 👇🏻👇🏻
store.civiltutorofficial.com/
SFD & BMD PDF
store.civiltutorofficial.com/product/shear-force-and-bending-moment/
2nd channel 👇🏻
ua-cam.com/users/Civiltutorofficial
Good
This was the easiest explanation I ever saw thanks.
I like your content and its information of calculation the safe depth and width of a beam. This is the information that i really need. How about to calculate the safe width of vertical column? The size of the column that will carry the beam safely?
excellent beam width & depth calculation #👍👍
Great explanation and easy to understand! Thank you Sensei!
Easy and simple explanation. Thank you 🙏🙏
This site is teachable and helpful. Thank you so much for this wonderful clip
Welcome
Superb lecture 👌👌👌👌👌👌...
Ty sir useful content for basic of rcc we hope more videos like this in future also
Sure 👍
Good lecture, can please provide a design of panels such as the ones to be use on perimeter fencing
Excellent video.....
Thankyou sir now only i seen your video
thanks,easy to remember
Please provide size of roof beam with reinforcement details for various floors . I purchased 3 PDFs which are so informative thank you
Send me bro
Sir please provide the full information about themocrete wired mesh roofing sheets for slab.... 🙏
Thank you sir...😊
your english is wonderful can understand clearly
Great 😍.
Thank you sir..
superb explaination....thank you 👍👍
You are welcome
can you please make a video on beam splicing where and how to
Very nice sir
thank you sir
Is it suitable for both plinth and roof beams?
Tank your very much sir
Thanks for the valuable information
Glad it was helpful!
Thank You
Thank you sir for what u r doing
It's my pleasure
Good work plz make more videos like this
Sure 😊
THANKS
Buildings have braced with different beams starting from grade beam upto roor beam. So,is the tumb tule has functional for varius beam .
Thanks
1st I love this video and thank you. I hope you can help though. I am building a pavilion 24’ x 14’ (7.312m x 4.267m). I am trying to calculate use of 3 clear span Tie Beams. Each Tie Beam is 14’L x 8”D x 4”W (4.267m L x .2032m D x .1016m W). These Tie beams will support an upper roof load by means of king post located located at mid point of each clear span. The 3 King post on supports 1 ridge beam 24’ L x 8”D x 5”W ( 7.312m L x .2032m D x .127m. All Tie Beans are supported by 8” x 8” (.2032m x .2032m timber post. The Tie Beam are solid Southern Pine Timbers Additionally each Tie beam is reinforced with mortise and tenon joints Knee braces at 18” (.762m) vertically and Horizontally from intersecting Post and Tie beam. (No other wall support). Calculation do not seem to pass by IS13950. But I have seen this structure and it seems safe. Can you help? Moment of inertia and bending stress formulas are confusing me. Thank you in advance
Thank you so much sir. It was helpful. Please make similar videos like this
Sure I will
nice video
Sir please give idea about end zone and mid zone nd how we provide no.of stirrups
200mm c/c at mid point of the beam..end support to be provide 100 to 150mm c/c
You may like to mention the material for the beam
Awesome sir 👌🏼👌🏼
Thank you
Please provide lecture for steel design and load calculation for the beams and slab
Sure
👌👌👌
Excellent
Thank you so much 😀
nice
Sir in case depth will increase its possible sir
How to calculate the size of beams and columns for structural steel.
Yow ....push that like button you'll.....this dude has some good content going on over here...😎👍🇯🇲
Much appreciated🙏
Have included the cover also
helpful
Glad to hear that
Please share Column and foundation detailing for G+1 and area 2000 sqft.
Please make same video for the column
Same video will be published today at 2:00pm
How to calculate stair mid landing beam depth
For g+1 storey building column size 10*12 steel bar 6-12mm steel at corner column 4-16mm & 2-12mm at side middle column, 6- 16mm & 2-12mm at middle column. Total column 12. Grade beam size 10*12 with 4-16mm & 2-12mm steel bar. Is it strong enough for this residential building?
Can you explain the details of G+ 2
Does this apply to all types of stories?
Super animasi
At 1:40 min, you meant to say the "minimum width" should not be less than 200mm, not "minimum depth".
If 1cum concrete take cement 350kg
Then how many kgs steel required for 1cum... Regular building
what about the load please, how does that affect the depth
How to find Colum size?
Same video will be published today
From where you got L by 10.pleas
What if it is equal to 0.4?
I got a little confused there...you mean the width from above the beam?....
Clear Span seem like width but it's span...so width of the beam is the top of it right?...
Yup
Assalam alaikum sir please provide the latest link of your telegram channel
Walaikum assalam..... t.me/civiltutorofficial
Is it l/d or L/D
Rule of thumb. L x .09 ex. 3m = 0.27. 4 m = .36m
He is saying same..and you are doing changes with denominator..1/12= 0.09 😅
10 meter ke liye column and top beam size
5
Sir
depth of beam 12 inches if clear span is 12 feet.
is it including slab thuckness in beam depth?
eg.if slab thickness is 5 inchess.we will see beam depth 7 inchess below slab??
Yes
Where is 10 m
W/d should be less than 0.3
Sir plz explain in Hindi
Pehle kaun thoka.... Dusra to apun ne thoka
Thank you ❤️
"I think lakshmi families and other families and me all are going to tour in North side plan :;" bill sanction and process and analysis@ to day on wards start@
Vous pouvez expliquer en français car j’ai pas compris
Pardon! je ne parle pas français
@@CivilTutor c’est dommage j’aurais voulu comprendre la vidéo
S'il vous plaît n'ayez pas honte de ne pas connaître une langue
@@CivilTutor non je n’ai pas honte de ne pas connaître l’anglais mais je voulais comprendre la vidéo tout simplement
Are u kashmiri?
Yes
MashaAllah... keep it up dear...❤
Aapke civil tutor application k course k bare me kuch puchhna h mujhe.. Aap apna helpline number dijiye please...
Whatsapp 👉🏻 9596684322
Ab toh shayad W/D >0.3 hogya hai ??? Ya 0.4-0.45 hi lena hai