A year ago, I didn't even know what an N52 was. Now 11 months later, I own a E61 523i and have done alot on it with help from this channel, I thank not thank you enough.
I got my N52 tuned earlier this week. My 2,5 215BHP now has increased torque to 280 Nm and 235 bhp. The car is a lot quicker in the midband 3-5000 RPM during acceleration. It is also a lot stronger so I am pleased with the tuning.
Before I found this channel I didn't even know what a N52 engine was. 25 hours of videos later...I own a N52 and am hurrying to get it ready to tune. Great content.
1. Update to the 3 stage manifold if applicable (N52 vs N53) 2. Dodgy cat removal to open up exhaust "makin' it a lot more better" 3. Unlock the "full power" with a MSD70 (only) complete tune. BMW Doctor's 272BHP with above mods. 4. Upgrade Air filter don't tune a broken car or use anything other than OEM parts *
My love has grown tremendously for bmw especially on the n52 engine Thanks for all your efforts imparting to us all this on your channel and be blessed
I love my 2006 BMW 530i M-Sport, amazing car and I would like to mod and tune it next year. Still looks modern, quick, fun to drive, 50/50 chassis balance. Take it on faster roads with turns and it is a blast to drive.
I don't get where everyone says the 328Xi coupe with N52 engine is slow by any means. the car only weighs 3500 pounds which is a little heavy but it is a nice solid car. But I've been in them with manual transmission and I thought was a really engaging and special car that was not slow by any means. But it needs more HP !
@@BMWDoctor for sure...just buried w work and having slack on my bimmers...you should hear the v8 on my m though...we need to tune it, maybe in a couple weeks when I'm free, then it's more of a monster than she already is
you can do alot mate trust me I have alot up my sleeve I havent revealed just yet I will be doing all this for members so stay tuned and become part of the members group when it becomes active
Years later and I'm still laughing. When I was in high school I had a 1989 Mustang GT. Fantastic car (I'm old, I got it when I turned 16 in 1991). Faster than just about anything else in the parking lot at school (graduation class was 977- so that's saying something!). My 128i was a tenth faster 0-60 and a couple tenths faster in the quarter mile. I understand that everything is faster now than it was in the 80s and 90s... But needing to do something to make the car feel less underpowered? It has plenty of power. More is always better. But as they came from the factory is quick enough to have a great time.
I have a South Africa spec 125i coupe with DISA. Did the BimmerLabs free tune and that enabled my DISA and got a lot more power (like a 130i hatch). Now that’s 265HP I think. Is your tune fundamentally different? I also did a decat on the stock headers. Big note: I run E70+ stock standard on the car as I own an Ethanol company. Do you do Ethanol/FlexFuel tunes for this car?! :D
@@BMWDoctor so how do you no what it's making surely running it on a dyno before and after would one make another video and two prove ur claims of over 270bhp
Tyler Yeoman people have buy ECU and took it for dyno and it’s been proven I don’t need to do dyno my friend I been doing this for 10 years I owned a remapping , programming business and still do
Good question that was summarily dismissed as foolish for merely asking for evidence of unproven claims, whilst Dean is very knowledgeable on this topic the way he handled such a vital question raises more questions in my mind than answer. We still need means of calculating any power gain.
hello, I watched the video on UA-cam and decided to write you. I own a 2011 e90 lci. motor n52b25 with a black cover and a three-stage manifold (Disa is from the factory) engine power 218 horsepower. Can I change the program of the MSV80 control unit to increase the power? if so, how much and how can it be purchased. Thank you
I have a stock 2009 328i N52 with about 200,000 KM on it, Its my first car and im looking to really dive into it. Ive replaced most of the things that are prone to breaking so what mods do you recommend I should do and in what order. Thanks in advance everyone!
Hey man just got a 328 2009 for my 2nd car how long did u have yours? Any tips? I’ve had mine for almost 9 months my first e46 325 broke so now I’ve had this for a while and I wanna add to it
@@repliica9204 2008 328i here, had mine about 6 months, its needed a radiator($600), some air ducts and filters and I recently did a power steering reservoir and belt, the cars running well now except I need a new battery. Expect to be under the hood every couple months.
Dean you are the best I depend on UA-cam for everything because I love working on my 2006 BMW 325i e90 your last Video the 3 to do for more power I just ordered the 3 stage intake manifold if You didn’t make that videos I would have just ordered a turbo kit for my car. Should I still order the turbo?
Got them about 2,000 miles ago and oh my god they are so crazy, the sound is amazing and the pulls now are so much harder. They bolted up super easily. If you want to do a prototype tune for mine with catless I would be down to have you tune mine just let me know if that’d be possible. Pops like crazy but I want to be able to tune for only certain rpms and also my car has 213,XXX miles and still runs extremely strong. Did active headers, full straight pipe as well as charcoal delete, mishimoto intake boot, and k and n filter like you my car sounds amazing and I love it man. Everything you have ever mentioned bout these is true g props to you and helping keep me updated 🙏🏼
I have a 2007 328xi I don’t think it’s the highest package I got either prolly base or one above do I also have options to make car produce more power ?
I have a stage 3 manifold with a black engine cover, how do I find out if I have the rt. ECU flash MSV70? Car was imported from Japan, 2007 e61 530i. Love the car and love N52 had the 4.4 twin turbo like this little engine more!
Are you using the n52k ecu in place of the n52? So my 6 has 258 hp? can that be taken to 272 with the 3 stage and the right files or am i missing something here?
Good day I just started watching your channel recently and enjoying your content very helpful. Recently I purchased a 2011 328xi in the U.S. I am has a cat back duel exhaust in to one muffler single exit 3 stage intake already on new tube of any sort the car has 160kmilws on it goe pretty nice I need your flash to let it breath can I purchase them or your prepped e I if you still stock them please lmk thanks.
A company is making them for me special for the channel I’m not allowed to give out details just yet as I’m not paying for them so prices are not set yet they need my old ones to copy them
you will not have engine light with this ECU EML light is programmed OFF this ecu has been made specific for N52 so you can do all steps to get full power without lights and failing smog , emissions , MOT
@@BMWDoctor Dean the catless headers make the n52 much louder, with a oem rear section it is ok but with an aftermarket exhaust and the headers it sounds pretty agressive. For some it can be too much. I love your hard work and the videos Dean. Thank you from the US.
I am currently getting 255 WHP on my e86 with the N52, have you ever locked out the valvetronic? Also have you been able to source cams for the N52? This is a race application. Thanks
Late response, sorry. Been researching this and all the dyno charts I've seen show the N54 manifold gains torque everywhere over a stock manifold, but it's only better than a 3 stage way up in the high rpms. A 3stg manifold provides larger gains anywhere under about 6500rpm, and the N54 is better above 6500, especially if you raise the limiter to over 7k. N54 is best suited to a manual trans and a short final drive ratio
With the n52, your options are the following.. 3 stage intake manifold, catless headers, air intake (or charcoal filter delete paired with a K&N filter), cat back exhaust, and of course a tune. This whole set up should get you 40-50 hp to the wheels. If you really wanna spend BIG dollars, than you can get the ESS super charger for about $5-6k. Honestly, if power is what you want, get a 135, or 335.
From valvetronic gasket yes it can get in the spark plug holes and all over it I have shown that on one of my recent videos from a leaking valve cover gasket.
Hi Dean I have purchased expert membership and I have the n52k with the 3 stage intake manifold. How do I buy either the dme with the tune or tune file from you? I don't see links anywhere and I can buy right now thanks
Hi Doctor, I plan to swap US N51 SULEV to EU N52. My question is about the ECU, I don't want to change any modules, keys etc. what are my possibilties? I do have the donor engine ECU.
Hello, my car is an N52 2.5l 523 2006 130kw 177hp, I have a 3stage that I installed and I want to know where I can buy the ECU and how many horses does the engine get? Thanks😊
How can I get this tune !! I live in california been looking for someone one to tune my 2006 325i 3.0L . Simple mods air intake carbon delete and a cat back exhaust. I plan on putting on the 3 stage asap. Lmk 🙏
Click here to become a EXPERT member
ua-cam.com/channels/VC3s1g57DoBMNOk_al1CVQ.htmljoin
what song do you use for your intro? i like it
Awesome, any for e90 n46 engine
I need a tune for my bmw 528i 2009 n52 e60 can you help me. I don’t have the stage 3 intake yet
BMW Doctor where can I buy a special ecu or tune for my 2006 330i
How much for the ecu
N52 squad!!!!!!!
'06 325xi right here
08 328xi sport
11’ 328i here
06 330i
328xi 07
A year ago, I didn't even know what an N52 was. Now 11 months later, I own a E61 523i and have done alot on it with help from this channel, I thank not thank you enough.
I’m so glad you are still making content for this amazing engine definitely the best channel for information on n52
Your welcome mate and it will never stop I’m the N52 guy and will always Be known as that and loyal to you guys
@@BMWDoctor hi, do you sell ECU for 125i E88 2008? Thanks
@@julienmazoyer12 he only does E60 n52 and e60 m5 s85
I got my N52 tuned earlier this week. My 2,5 215BHP now has increased torque to 280 Nm and 235 bhp. The car is a lot quicker in the midband 3-5000 RPM during acceleration. It is also a lot stronger so I am pleased with the tuning.
what tune did you get and what year model do you have
Where did you get your tune??
Hi I am gonna take the n52n 2.5 this week! Is that easy to work on? Swap to 3 stage manifold?
Before I found this channel I didn't even know what a N52 engine was. 25 hours of videos later...I own a N52 and am hurrying to get it ready to tune. Great content.
Robert Reffell haha this comment is awesome 😎
You should have bought N54 😅
Raul Molina no he should have bought a b58 👌
@@Xboxblowz do you have b58 money?
1. Update to the 3 stage manifold if applicable (N52 vs N53)
2. Dodgy cat removal to open up exhaust "makin' it a lot more better"
3. Unlock the "full power" with a MSD70 (only) complete tune. BMW Doctor's 272BHP with above mods.
4. Upgrade Air filter
don't tune a broken car or use anything other than OEM parts *
No you don’t use a MSD80 it can only be done on MSV70
@@BMWDoctor Damnit, 9 outta 10, fixed!
Major Disaster and you can’t just buy the tune from anyone I’m the only one that does the tune
@@BMWDoctor fixed, is my comment ok now Dr?
@@BMWDoctor can i get the software off from you
Dude I’m in the us. Got a 2007 e60 3.0. Car is the most reliable car I’ve ever owned
New n52 owner here. Just thank you for the vids and knowledge you give us!!!
My love has grown tremendously for bmw especially on the n52 engine
Thanks for all your efforts imparting to us all this on your channel and be blessed
I love my 2006 BMW 530i M-Sport, amazing car and I would like to mod and tune it next year. Still looks modern, quick, fun to drive, 50/50 chassis balance. Take it on faster roads with turns and it is a blast to drive.
How much power have you been able to get out of the 2.5?
I don't get where everyone says the 328Xi coupe with N52 engine is slow by any means. the car only weighs 3500 pounds which is a little heavy but it is a nice solid car. But I've been in them with manual transmission and I thought was a really engaging and special car that was not slow by any means. But it needs more HP !
Just as you've taught me Dean...love it as always. Squids, this guy's the man. The wizard
no problem matt yes my friend and I hope you will take part in the membership coming soon bro alot you can learn on there
@@BMWDoctor for sure...just buried w work and having slack on my bimmers...you should hear the v8 on my m though...we need to tune it, maybe in a couple weeks when I'm free, then it's more of a monster than she already is
Yess thank you Dean I own a BMW z4 2008 and I don't know what I can do performance wise
you can do alot mate trust me I have alot up my sleeve I havent revealed just yet I will be doing all this for members so stay tuned and become part of the members group when it becomes active
I have a 2007 Z4 roadster.
Any dyno charts? 270+bhp sounds great
Years later and I'm still laughing. When I was in high school I had a 1989 Mustang GT. Fantastic car (I'm old, I got it when I turned 16 in 1991). Faster than just about anything else in the parking lot at school (graduation class was 977- so that's saying something!). My 128i was a tenth faster 0-60 and a couple tenths faster in the quarter mile. I understand that everything is faster now than it was in the 80s and 90s... But needing to do something to make the car feel less underpowered? It has plenty of power. More is always better. But as they came from the factory is quick enough to have a great time.
Hi dean. I have a 325i N53.
Are you able to tune that to 272bhp?
I bought my first bmw a few months back. It has the stock under powered intake. Looking forward to a 3 stage upgrade in a few weeks 😛
Hey bro how did it go and which one did you go w
^?
I have a South Africa spec 125i coupe with DISA. Did the BimmerLabs free tune and that enabled my DISA and got a lot more power (like a 130i hatch). Now that’s 265HP I think. Is your tune fundamentally different? I also did a decat on the stock headers. Big note: I run E70+ stock standard on the car as I own an Ethanol company. Do you do Ethanol/FlexFuel tunes for this car?! :D
Is there any dyno proven results of the ecu tune
We don’t need dyno stop being a fool I have this tried and tested by many many people
@@BMWDoctor so how do you no what it's making surely running it on a dyno before and after would one make another video and two prove ur claims of over 270bhp
Tyler Yeoman people have buy ECU and took it for dyno and it’s been proven I don’t need to do dyno my friend I been doing this for 10 years I owned a remapping , programming business and still do
Good question that was summarily dismissed as foolish for merely asking for evidence of unproven claims, whilst Dean is very knowledgeable on this topic the way he handled such a vital question raises more questions in my mind than answer. We still need means of calculating any power gain.
hello, I watched the video on UA-cam and decided to write you. I own a 2011 e90 lci. motor n52b25 with a black cover and a three-stage manifold (Disa is from the factory) engine power 218 horsepower. Can I change the program of the MSV80 control unit to increase the power? if so, how much and how can it be purchased. Thank you
Hi dean can I buy the Msv80 272 bhp ecu with the down stream lambda sensors deleted from you
I have a 2006 N52 and I am making 291HP (217kw).
I have a straight pipe (catless) and a stage 2 tune
What kind of perfomance air filter would you recommend ? Do you have a link or something ?
Have you done anything with high flow cats as opposed to going catless? Also, interested in your tune!
Hi. I have an E60 N52 523i 2005. Would you please write down those 3 parts as said on this video? Thank you.
Thanks for all your videos doc. Are you still selling these Ecus?
Great video. Do you still sell the msv70 that will work with my 07 328xi?
Or sell the flash/tune for a msv70 ? I have an msv70 sitting on my shelf.
Just got a 06 BMW 325xi and a 11 BMW 328i learning about them .. good info
Octane adaptation option in the insta Bmw same thing as to having a the flex fuel coding feature I have on my e60 n52 2008
My 2013 e82 125i aus delivered, I’ve got full custom Catless headers does like 5.9 seconds to 100 with the auto gearbox
I believe n52b25 1 gen with 218hp max what you can get? Or I'm wrong?
I have a stock 2009 328i N52 with about 200,000 KM on it, Its my first car and im looking to really dive into it. Ive replaced most of the things that are prone to breaking so what mods do you recommend I should do and in what order.
Thanks in advance everyone!
Hey man just got a 328 2009 for my 2nd car how long did u have yours? Any tips? I’ve had mine for almost 9 months my first e46 325 broke so now I’ve had this for a while and I wanna add to it
@@Shadow.509T I’m about to get one as well, u done anything yet?
@@repliica9204 2008 328i here, had mine about 6 months, its needed a radiator($600), some air ducts and filters and I recently did a power steering reservoir and belt, the cars running well now except I need a new battery. Expect to be under the hood every couple months.
Dean you are the best I depend on UA-cam for everything because I love working on my 2006 BMW 325i e90 your last Video the 3 to do for more power I just ordered the 3 stage intake manifold if You didn’t make that videos I would have just ordered a turbo kit for my car. Should I still order the turbo?
No need for turbo mate trust me 3 stage is enough and but you will also need the ECU to benefit from the 3 stage or it won’t work
Hands down best info for these models on UA-cam defintely knows what he’s talking about many other UA-cam’s have no clue wtf they are doing
Hey brother man, was wondering if you still have any ecu's for sale and will it be compatible with a 07 530i
N 52 The best ever
thats completely correct and I agree
n51 😎
Got them about 2,000 miles ago and oh my god they are so crazy, the sound is amazing and the pulls now are so much harder. They bolted up super easily. If you want to do a prototype tune for mine with catless I would be down to have you tune mine just let me know if that’d be possible. Pops like crazy but I want to be able to tune for only certain rpms and also my car has 213,XXX miles and still runs extremely strong. Did active headers, full straight pipe as well as charcoal delete, mishimoto intake boot, and k and n filter like you my car sounds amazing and I love it man. Everything you have ever mentioned bout these is true g props to you and helping keep me updated 🙏🏼
What tune???
I have a 2007 328xi I don’t think it’s the highest package I got either prolly base or one above do I also have options to make car produce more power ?
I have a stage 3 manifold with a black engine cover, how do I find out if I have the rt. ECU flash MSV70? Car was imported from Japan, 2007 e61 530i. Love the car and love N52 had the 4.4 twin turbo like this little engine more!
Bro
Thanks for your information
How could i tune or buy ECU from you
I have n52 black cover with disa valves
i have an 08 528i, i was reading that it’s possible that the stage 3 manifold comes already in some how does one know?
naa those are in the 30i’s but u could swap it urself it’s not hard at all
Very informative video, may i ask what you think of the n55 i would like a bit more power than i would get from a 330
Can you make a video about how to fix oil pressure? Thanks
I have a bmw 330i 2006 and everything is good except the cats. So catless headers well help my car out or would it not.
BMW Doctor can you modify a rev limiter also on this ECU to have pops like on m50 in E36 for example?
Please no...
@@thetumanshow why i don't want flames only rev limiter like inbold BMW
Hello can i tune my 528i E60 for three stage manifold?
Will catless headers clip the check engine light?
Fyi- the idle rattle on my 10 x3 n52 ended up being loose cam sprocket bolts
A lot of these upgrades have been found on forums. Not much new stuff here but nicely compiled 👍
Not my tune hasn’t mate it’s my own custom tune that works for ALL N52 with or without 3 stage
@@BMWDoctor But only if I have the MSV70 ECU? My 328xi has the MSD80, I want to verify before I buy your tune.
European black cover 2006 E92 N52B25 ... works for my car too?
I have an 06 530xi with magnesium valve cover. 255hp & 220 ft/lb @2700
Check Engine lights if you tamper with the catalytic converters
How does oil get into the cat? I thought the only way is through the exhaust valve opening and oil leaking into the cylinder???
Are you using the n52k ecu in place of the n52?
So my 6 has 258 hp? can that be taken to 272 with the 3 stage and the right files or am i missing something here?
Good day I just started watching your channel recently and enjoying your content very helpful.
Recently I purchased a 2011 328xi in the U.S. I am has a cat back duel exhaust in to one muffler single exit 3 stage intake already on new tube of any sort the car has 160kmilws on it goe pretty nice I need your flash to let it breath can I purchase them or your prepped e I if you still stock them please lmk thanks.
Anyone have a link to where you can buy one of these ECUs?
Watching your videos about n52 i got mine 630i 258hp n52b30 but is burning oil insanely like 1.5L /2000km ,is this normal i use motul 5w40 oil ll01
Does this apply on the 523i 2011 f10
How much for the flashed ECU ????
Thank bro how much for the n52 tune also can I put the 335i manifold on my 328i
I have a 2008 3281 N51 it has the 3 stage intake. will the ECU you are referencing work with this motor?
I have the n51 on an 07 328 Xi. Do you have info or a video on maximizing power on that engine?
Where are you getting the catless manifolds from
.. Want some for my 130... But not managed to find any for rhd
A company is making them for me special for the channel I’m not allowed to give out details just yet as I’m not paying for them so prices are not set yet they need my old ones to copy them
@@BMWDoctor What about engine light after removing the cats?
you will not have engine light with this ECU EML light is programmed OFF this ecu has been made specific for N52 so you can do all steps to get full power without lights and failing smog , emissions , MOT
@@BMWDoctor Dean the catless headers make the n52 much louder, with a oem rear section it is ok but with an aftermarket exhaust and the headers it sounds pretty agressive. For some it can be too much. I love your hard work and the videos Dean. Thank you from the US.
BMW Doctor when is the membership starting ?
hey doc i paid for expert membership can you tell me where to find the tune please
I am currently getting 255 WHP on my e86 with the N52, have you ever locked out the valvetronic? Also have you been able to source cams for the N52? This is a race application. Thanks
Amy info ?
How do I purchase the upgrade dme for the N52?
Question, what about an N54 manifold swap vs the 3 stage manifold? Is the 3 stage better than the N54 intake?
Late response, sorry. Been researching this and all the dyno charts I've seen show the N54 manifold gains torque everywhere over a stock manifold, but it's only better than a 3 stage way up in the high rpms. A 3stg manifold provides larger gains anywhere under about 6500rpm, and the N54 is better above 6500, especially if you raise the limiter to over 7k. N54 is best suited to a manual trans and a short final drive ratio
Hi , one question, i do have an american n52 engine... what do i need to make more powerful.??? Thank you very much
With the n52, your options are the following.. 3 stage intake manifold, catless headers, air intake (or charcoal filter delete paired with a K&N filter), cat back exhaust, and of course a tune. This whole set up should get you 40-50 hp to the wheels. If you really wanna spend BIG dollars, than you can get the ESS super charger for about $5-6k. Honestly, if power is what you want, get a 135, or 335.
I need this!!!
Dean can it code new injectors? Cheers
Can you do a video on re-pen the mass airflow sensor pigtail
How can I purchase the N52 engine tune? Also what headers were used?
Hi ! I want to do this too to my 08 528i do you have a link to purchasing the 3 stage manifold ?
Tell me how can leaking oil from valve cover gasket or valvetronic gasket can end up in cylinders
From valvetronic gasket yes it can get in the spark plug holes and all over it I have shown that on one of my recent videos from a leaking valve cover gasket.
What was the piece/part you were saying called on the intake manifold that can help produce more power? 2:04
Hi Dean
I have purchased expert membership and I have the n52k with the 3 stage intake manifold. How do I buy either the dme with the tune or tune file from you? I don't see links anywhere and I can buy right now thanks
Wasn't the change over to n53 after Sept 07 so pre sept 07 would be n52? Just want to double check as I'm looking for one.
Awesome content dude 👍
Hello doctor how can I buy that N52 ECU
Hi Doctor, I plan to swap US N51 SULEV to EU N52. My question is about the ECU, I don't want to change any modules, keys etc. what are my possibilties? I do have the donor engine ECU.
Doc, do you ship your ECU to the U.S. and does it work on the N52 black cover, non 3stage manifold? Thanks you, great content.
I have a 05 plate 630i I believe the n52 engine will this upgraded Ecu work for me
yes it will
Hi, i ha e a BMW 325i 2,5L N52 engine. This software will work with this engine right? If so, how much for the ecu
What can i do if i already have E92 330i with N52B30 272hp? It can be improved?
Hello, my car is an N52 2.5l 523 2006 130kw 177hp, I have a 3stage that I installed and I want to know where I can buy the ECU and how many horses does the engine get? Thanks😊
hey Bm Doctor,im keen on getting the ECU? How much?
how do I inquire about purchasing an msv70 ecu from you ?
How do I buy a tuned ECU from you for a e92 325i with 3 stage intake ?
Does the tune work for MVS90
Did you Do any camshaft bolts replacement?
I have a 2011 n52 f10 523i, will this work for my car?
Getting my 530i n52b30 from 258hp to 284hp + 30nm
How can I get this tune !! I live in california been looking for someone one to tune my 2006 325i 3.0L . Simple mods air intake carbon delete and a cat back exhaust. I plan on putting on the 3 stage asap. Lmk 🙏
Gracias por tanta buena información. Abrazo, Bernardo.
What’s the price of ecu? N25b25
For the ECU do you need the vin number or to have it registered to the car ?
Hi, I really like your channel. Will 272bhp be the achieved horse power after the tunes you mentioned on an e90 330i?
does anyone know if I can do any of these tunes on my 06 325i?
Can I use your ecu that you make with my black cover engine? Fully stock?
How much for the ecu please doctor
I have a MSV70 Blacktop N52 in a 125i, can I get the ecu? how much to be shipped to Australia?