This is the first video I've seen of yours and it's very well made. Throughout watching this and with your sense of humor I couldn't help thinking that you were the Dad I should've had 😂. Well don't sir be safe out there
Glad you enjoyed it! What a nice compliment. If you liked this one, I have an entire playlist about the CB500X. Plus I highly encourage you to check out the travel videos where my friends (with equally goofy senses of humor) explore the planet. 😀
I loved this video! I'm having the same leak with my 2019 500F (last without LED screen) and I started getting pretty nervous, thank you for your videos, you do an amazing job, greetings from Chile!
I have had 4 CB500s and 3 have had waterpump dribbles from the weep hole , but never a major leak . the last one replaced under warranty after 400mile from new and even that one leaked at 3000miles
I've replaced the water pump on my 2015 CB500X 4 times in 32,000 miles...and I'm on my way to needing a 5th new pump. FWIW, I don't drain the oil, I use a syringe to suck about a pint or two of oil out of the filler hole -- this drops the oil level just below the water pump, so you can pull it off w/o oil leaking out.
Well, if you're about to change the water pump for the 5th time then there's something you're doing wrong. 😅 Have you tried to replace the original seal and o'ring for a better more resistant one? 😉
Outstanding tutorial. I'm scared to know how much a dealership would charge for this parts and labor 😳. Knowing the weep hole drip clue is great shared knowledge for a novice like me. Thanks for posting this. Sub'd
Thanks for commenting and subbing, Neutral! We've got tons of fun CB500X and motorcycle adventure content for you. :-) Have you done the 16T sprocket upgrade yet? Check out that video...
@@MotoPhotoAdventures I watched that and was like hmmmmm. A buddy of mine and another dude suggested doing that. I might in the future, but I literally just putz around the back country roads in the rural farm area I live in. No interstate or prolonged high revs. I did however key in on you saying less vibration with it. Other than that for my mediocre riding I don't think I would utilize the 16t much. On another note your presentation skills and on screen abilities are superb. Keep it interesting, educational, and entertaining. Looking forward to viewing your stuff. 👍
@@findingneutral thank you for those kind words! We have fun doing these...glad you enjoy them and find them helpful! Check out our adventure videos too! We just released a new one today that is EPIC!!! Hit the notification bell to get a ping when new ones come out. :-)
Mine did that from the 1st week that i got it.. model 2015. I kept taking it to the dealer for 3 months with half ass fixes, until finally they admitted it was unacceptable and changed it.
Sorry to hear that. Glad they got it replaced. They were right to do so. Hondas are normally bullet proof. Too bad a few of them have this one little weak link. Fortunately I think it's been fixed on the 2018-present models!
Glad you enjoyed it! Here's everything you need to know about the CB500X after riding it for 60,000 miles!!!! ua-cam.com/video/GC2Jx2moLbA/v-deo.htmlsi=LXHJc79xcCSiDEa0
Aha! A bit of googling on an online catalogue and I've found that Honda have updated the part. Changed the 'MGZ' for 'MKP'. I don't know what is updated or if the new part will for older bikes though.
@@mickleblade awesome...thanks! It'll be interesting to see if it's the same item, just a new catalog number...or if they've actually redesigned that sprocket for the 2022 model.
@@MotoPhotoAdventures an update, comparing the fiches, the only parts difference are a pair of bolts, parts 8 & 9.Their sizes are the same but they've added a code S-NSHF to the description. I feel it's unlikely to be a magic fix but what do I know, total cost to change them is ~15 euros
Thank you so much, Mario! I hope you can help us by Subscribing to the channel and sharing the video on social. Check out some of our other videos on the CB500X, and our adventure travel videos. Episode 42 of the Trans-America Trail is pretty epic Cheers! Cheers!!!
FWIW...... most liquid cooled bikes do weep a bit..... it is from the mechanical seal inside the pump. Unless it's leaking enough to puddle it really isn't necessary to change it.
Great video thanks mate, I see you're a rugby fan, serious butt kicking from our boys this weekend, not sure if it does the game in that part of the world any good though. Thanks for the great videos
Thanks for the comment, mate! I'm a professional photographer and had the pleasure of photographing a few games over the years. That's one of my shots that won an award. I've been to New Zealand and LOVED it there! And yes, I do own an All Blacks jersey...HAHA! Anyway, glad you enjoyed the video!
HAHA!!! Glad you enjoyed it, Ahmed! We don't take ourselves too seriously. ;-) Thanks for the sub. If you like good-natured humor mixed with lots of motorcycle stuff, I hope you'll check out some of our adventure videos like this one...ua-cam.com/video/1nMIH2yxRR8/v-deo.html.
I got the 2019 version. I’ve noticed that little drip around 5 000km after I bought it. Almost 12 000 km and Still got that drip, but my coolant level remains between min and max lines. Your video just made me realize that my bike might have a water pump sealing problem. I’m gonna try to replace that pump using warranty ... Really good video, subbed ! :)
You probably dont care but does any of you know of a way to get back into an Instagram account..? I was stupid lost the login password. I would love any help you can offer me.
@Omari Mordechai Thanks for your reply. I got to the site thru google and I'm trying it out now. Takes a while so I will get back to you later with my results.
Thank you so much, Shane! Hopefully you don't ever have the problem. But share it with your friends in case someone else out there could use the help! :-)
Just a thought, but would a new “O” ring have cured the leak without the need to change the pump? I don’t know much about this but it’s strange Honda sell just the “O” rings separately. Maybe a number of the reported water pump failures on the CB500X are in fact just simple “O” ring leaks.
Thanks mate!!! My wife's best friend is from Geelong, near Melbourne. She's been Down Under many times. I've only been there once. But I fell in love with the place! Cheers...
Thanks for sharing, Chris and Jason! Nice work guys! I usually don't perform such jobs myself, but watching you doing and explaining is kind of inspiring! ps: Never saw an underwear with human faces on it! What are those pictures doing on an underwear for goodness sake?! :-)
HAHA!!! I think it's an old Star Wars theme underwear. Hey, my wife says I'm still just a teenage boy at heart! ;-) Anyway, thanks for the comment. And just so you know, I'm not a natural mechanic. I've slowly taught myself how to change my own oil, replace parts like battery and muffler, even install the Rally Raid suspension. So if I can learn to do these things, so can you!
Thanks Kevin! It's starting to get a bit worn. I'll probably replace it soon. Definitely going with the 16T size again, which I upgraded to several years ago: ua-cam.com/video/icaJFIgS_a0/v-deo.html
You're very welcome! Glad we could help. We have lots of other "How To" and Review videos for the CB500X on the channel, as well as lots of great CB500X adventure videos. I hope you can help us by Subscribing, and enjoy the rest of the videos! :-)
Hi there! Nice videos, I have just bought my 2022 cb500x and seems your videos will guide me in. I’m pretty sure this question been asked before but where did you get your engine guard? 😅😅😅 . Thanksss
Hi Agezzio! Welcome to the channel. You are going to love your new bike!!! My engine guard is from Givi. You can see all the accessories on my bike by visiting our website at: motophotoadventures.com/the-bikes/. Also, we have lots of tutorials and reviews about the CB500X on the channel...as well as fun adventure rides with it. Please like and subscribe to learn more!
I missed the chain guard spot. Mine fell out while taking the pump off. what held it on if it wasn’t the same bolts holding the pump on? Being it didn’t fall out until i removed the pump.
Hi Jordan! The chain guard just sort of "hangs" in place. Then when you tighten the bolts it gets "squeezed" to hold it in position. You might want to watch our chain and sprockets video where you'll see more about the chain guard: ua-cam.com/video/Je6LdgYt9fg/v-deo.html.
Hi Tom! I didn't disassemble it since it's not really a "parts serviceable" piece. I just did my research as to the cause of the leak and replaced the whole part.
Hi Chris, I did subscribe. I enjoyed your water pump replacement. I was going to asked how many miles you had on it when it needed that replacement but I kept reading the comments until someone else asked it. I've never owned any of my 64 bikes long enough to put that many miles on them so if mine lasts as long as yours, I'll never have to do that job. But there's guys that had them start leaking a lot earlier so I might not get so lucky. It does appear to be a recurring problem that I feel Honda really should address. There's a weakness in their design someplace. I wonder if the newer ones (2022+) are still going to have that problem? Hopefully Honda finally did something about it so maybe I won't see that problem, but I wouldn't count on it any more than Kawasaki fixing the "doohickey" problem on the KLR650.
Thanks for the Sub, Spydie! You're absolutely right, it would be nice if Honda changed something. But honestly, I don't think this issue is nearly as prevalent as the doohickey. My bike is one of the original 2013 models. There doesn't seem to be a rhyme or reason as to when/if this issue pops up. But I have a LOT of friends who own this bike (maybe we became friends because of that connection?), and none of them have had this problem. I think it's less common with newer models. So hopefully you'll be fine. Just ride and enjoy your machine! If for some reason you do develop a leak, now you know how easy it is to fix. 🙂
@@MotoPhotoAdventures you may have seen on my channel the comparison I did last week between the CBX and the VX. The hose/piping on the VX is a lot cleaner/less cluttered than the Honda, but I don't know what the chore is to change the water pump. I don't think anyone ever had to do that on a VX. ha ha
That is correct! No need to change anything. Just swap the 15T stock sprocket for a 15T and you're all set to go! It's an easy and inexpensive upgrade. It will change the accuracy of your speedometer. But I use a GPS on my bike anyway. So I use that to determine how fast I'm going, not my speedometer. If you want to calibrate your speedometer to match the new sprocket, I recommend the SpeedoDRD DRD-3 from 12 oClock Labs - amzn.to/2Pahs8C. It's a plug-and-play piece of electronics that you clip into place and adjust your speedometer accordingly.
Hi, i changed my motor oil and i give it a 10W30. I live in Czech Republic and there is about 30-35 degrees celsius in summer (86-95 Fahrenheit) it is good choice or should i go with 10W40?
Aha! Now that you have removed the water pump, I see where the oil would be. But it seems like you would only drop the oil level a little bit So you wouldn’t spill any oil on the floor.
Hi Doug! That is correct. You don't have to completely drain it if you don't want to. Some people just siphon some oil out of the tip filler cap to be safe. But it was about time for me to change mine anyway, so I went ahead and dropped all of it.
Hi Sypdie! I had them checked several years ago. They were still within spec. So I haven't bothered since. I did buy new spark plugs, thinking I would tackle that some day. But it's such a major project, and the bike is still purring like a kitten, so I haven't bothered yet. :-)
@@MotoPhotoAdventures Thanks. I was wondering about that. A friend had his shim/bucket valves checked on his Kawasaki Concours at 15,000 miles and they were still in spec, but the labor cost $1200. I'm thinking they are something to not be concerned about and like you said, it is one heck of a big job to do, and very costly if you have to hire it done. And it's hard to tell if they really need it (the bike will still purr like a kitten) until you burn an exhaust valve! LOL. All my bikes until the Versys X and this one have had the old mechanical valve adjustment and I always adjusted my own. But I seldom keep a bike long enough to get enough miles to have to adjust a shim/bucket system.
@@spydie HAHAHA...well I guess that's always a good excuse to keep selling old bikes and buying new ones. That way you don't have to worry about major services like valve adjustments! 🙂
Hi Thomas! It's pretty much indefinite. The problem is in quality control. Occasionally these "affordable" adventure bikes get one installed that has a slightly crooked shaft or other defect. The problem rises to the surface right away. I bought my bike with only 2,000 miles on it from an owner who rarely rode it and always kept it in the garage. But it already had a little moisture around the weep hole. It's not a major issue, so I lived with it for the next 40,000 miles until it got bad enough that I needed to do something. I inspected the new one before putting it in and it looked perfect. The weep hole has been dry as a bone over the 6,000 miles I've ridden it since. Most CB500X owners never have a problem with it and the original water pump lasts the entire life of the bike. Unfortunately, mine was one of those with this known issue from the day I got it. But this simple and inexpensive fix has it back to good-as-new!!!
my fried kris i have a problem with my cb500x 2020. i have done 3200 km and i noticed that the cooler tank is empty. i filled it and after a few rides the level lowerd again. the water pump did not hade a leak. what is the problem ? what can i do? thanks a lot
Hi Helen! The first thing I would do is check the radiator. You'll see how to access it while watching this video. If the radiator fluid is low, it draws coolant from the overflow tank to compensate. I would make sure the radiator is full of coolant first, then fill the overflow tank to the top mark, then see what happens. If the overflow tank continues to drain at a rapid pace, have it checked by a professional. And for the record, I am NOT a professional!!! :-) I hope this helps!
Hi Ehsan! It was made by a company called Motea in Europe. I don't believe they sell it under that brand anymore. But it's very similar (if not identical) to the one you can find on eBay that's being made in China. I hope this helps!
Greetings from Ireland, purchased a 500x last November, moved down from a yam tracer 900. Enjoying the 500 very much! Three questions if you dont mind: 1. tyre type ur running? 2. should the new water pump not be covered under warranty? 3. Is the new pump an upgraded version of current one? Regards Dermot
Hi drDer! Thanks for watching. I'm glad you're enjoying your CB500X. :-) To answer your questions: 1. Continental TKC80 front and back. LOVE them! Check out some of the AMAZING adventures they've taken us on: ua-cam.com/video/Im8M-tRJXuY/v-deo.html. 2. My bike is a 2013 model with over 40K miles on it. No warranty, I'm afraid. 3. Nope. The old pump simply started leaking after several years. Many CB500X owners have reported the same issue. The new pump is the Honda original part. Only reason to replace is if yours develops a leak. Hope this helps!
@@glenbawndog that is exactly what I was wondering as well. If this is a week part to such a good overall bike, you would think they would do an improved part.
I don’t see how it would be possible for oil to mix (invade) with the coolant. That would be very bad in any internal combustion engine. So I don’t believe you would have to mess with the oil when changing the oil pump. Unless you have a head gasket problem and the oil and gas is mixed!
After seeing it out, it doesn't look like oil would get into the cooling system, but you would lose it all over the garage floor. Probably could lay the bike on its side to avoid draining the oil.
Hi Joseph! Mine wasn't a bad issue. There was no damage to anything...just leaking coolant at the weep hole. It started out very minor...but got worse over time. I put thousands of miles on it even after I discovered the problem...the only issue being I had to top off my reserve tank with coolant more frequently. But I could tell it was only getting worse. Which is why I went ahead and replaced it. I hope this helps!
Mine started to loose coolant through the weep hole in the pump, it was wet from new. Finally got the dealer to replace it under warranty, replaced at 2000 miles. Took it in twice before they fitted the new one. Poor engineering!!
@@MotoPhotoAdventures Thanks Chris. It doesn’t give me a lot of confidence with other Cb500x owners having the same problem. I had a test ride of a 2021 Himalayan and quite liked but for my knees hitting the edges of the fuel tank. Where I live in the North East of Scotland the roads a
Sorry about that, got interrupted and pressed the send button. As I was saying, a Himalayan would be ideal for where I live, lots of small roads and tracks to travel on.
@@johnbaker7626 the Himalayan is a nice bike. But I think the CB500X is a better bike in almost every way. The water pump truly is not a rampant problem. You got it replaced early. So you should be good to go! Mine happened at over 65,000 miles! If you want to do a lot of gravel and off-road riding, check out my review video of the Rally Raid suspension...truly an excellent upgrade!
MAJOR 2022 UPDATE NEWS! If Honda updated the 2021 CB500X, they really updated & actually made better the 2022 CB500 line. Today (Sept. 1st) Honda unveiled *_major_* improvements to it. A happy minor improvement to the 2022 CB500X is _much better color scheme compared to the 2021 (IMO). Did they fix the water pump for 2022? I wonder.
Thanks for posting, SweetCostaRica! I see they've made some nice improvements. I'm looking forward to hearing people's reviews as they become available. Pura Vida!!!
@@Victor-vf1fi Do a word search: 2022 Honda CB500X or the other 500s. All of the reviews start with what they did to improve the new model(s). Whether you think the think they are improvements is another matter.
Was it oil leaking from the water pump area and not coolant? I seem to have an oil drip coming from there but not losing coolant. I picked my bike up used with 1800 miles 2017 model recently. It isn't a bad leak but I want to address it at my next oil change. Hopefully this will fix it. I have read that this is a common issue with these bikes
Hi Capt Z! I'm not sure what's dripping from yours. But if it's dripping in the same area, a new water pump is definitely what you need!!! Luckily, once you replace it, you should never have to do it again. :-)
Doesn't Honda recommend 10w30 oil in the manual? I see you changing it with 10w40. Care to share your thoughts about this? I have an open discussion since years with my local mechanic about this... can't win apparently!
Hi Mario! I can't remember what is listed in my manual. But during the summer, it gets really hot and humid here. So during the summer months, my local dealership recommends 10w40 to keep the engine a little cooler. During the winter I switch back to 10w30.
@@MotoPhotoAdventures thank you for replying, I will have another discussion as soon as I can... after 33k km I don't want to run into problems, warranty us a thing of the past :(
@@miticivisivi you're very welcome! Honestly there is very little difference in the weight of 10w30 vs 10w40 oil. You're not going to damage anything by using one or the other. I would go with the manufacturer's recommendation unless, like me, you live in an exteme environment where one offers a benefit over the other.
@@miticivisivi talk to your dealership. I'm not a mechanic (or a lawyer)...HAHA!!! I'm just sharing what I've been told by my local dealership for the conditions I live in. :-)
Should this be pretty close to 2021 cbr500r? Was thinking about replacing the gasket but everything I came across says just do the whole water pump. For me seems like its seeping out where the gasket is really really slow. Cleaning my chain tomorrow so I can get a really good look at it.
It's the same exact engine on both bikes. So I would just replace everything like I did. You'll have to disassemble everything twice if you replace the gasket and it doesn't fix the leak.
Hi Karl! That's a negative. The occasional drip is one thing. Constant leaking from the weep hole is an indicator that something is not healthy with the engine. It was bad enough that I started parking the bike on cardboard because there would almost always be a drip or two underneath it after ever ride. The engine wasn't overheating. And I probably could have just kept running the old pump as long as I continued to check the overflow tank and topping off the fluid levels. But with several long-distance trips coming up, I felt better just fixing the problem. It hasn't leaked a single drop since I replaced the pump back in February. :-)
I don't believe it is. Many changes were made to the CB500X after 2018. I don't hear of many newer bikes having this problem. And even if they do, this bike is so reliable that when I say "weak link", it's STILL a more reliable engine than most other adventure bikes out there! Honda has a reputation for excellent durability and longevity in their motorcycles. I certainly would never choose not to buy a CB500X because of the Water Pump issue.
@@MotoPhotoAdventures oh thanks for the answer i hope i can affor a brand new in 2023 but my friend said its not made in Japan anymore its made in Thailand any word on that?
@@pakssmsjsjsks8596 I'm not familiar with the new 2022/2023 model. But even if they move manufacturing to Thailand, I don't think that will affect the quality of this motorcycle. It is known for being a quality bike at an affordable price!
Hey HightLink! I bet 99% of these bikes will never need the Water Pump changed. So it's not something you need to worry about, UNLESS you start to notice significant leaking at the weep hole. Watch the video to know how to tell. But hopefully you'll never have to worry about it!
@@HightLink that's awesome! These bikes are such an amazing value. They're extremely reliable, easy to maintain, and economical to own! We have TONS of tips and tutorial videos about the CB500X on our channel. Whether you're learning how to change the oil, upgrade to a 16T front sprocket (highly recommended), or fixing a puncture, we've got it all: www.youtube.com/@MotoPhotoAdventures/search?query=CB500X. Plus we have a ton of awesome riding videos where I take my 2013 CB500X on trails it probably doesn't belong on...HAHA: ua-cam.com/video/Im8M-tRJXuY/v-deo.html. I hope you'll subscribe and check out what we have to offer...
Hi mate i dont remember if i asked this on the sprocket video but did you have to grind down the chain guard , changing the water pump seems like a pretty simple task i have a 2015 only has 8300km on it so far bought it last year with 5400km hopefully i will have a while before i need to do this work . P.s we have an old saying in australia "Honda parts are bloody expensive"
HAHA!!! Love the Aussi saying. By the way, we visited "Down Under" a couple years ago and absolutely loved it! We have good friends that live there, as well as in New Zealand. We really enjoyed your beautiful country...and even got to photograph the Australian Open for a day: chrisandcami.com/the-australian-open/. Anyway, to answer your question, yes I did grind down my chain guard because I thought I heard the chain hitting it after I installed the 16T sprocket. Although after shaving down a good bit of it, I realized I probably just had it installed upside down! Most likely, I didn't have to shave it at all!!! Oh well, at least I have extra clearance now just in case. :-)
@@crispernator by the way, check out some of our other CB500X videos like this one: ua-cam.com/video/BMFrt_aPOGM/v-deo.html. And give us a Subscribe if you don't mind! It really helps us be able to keep putting out new content.
Hi Mate, I am in oz also and don’t find Honda parts any more expensive than any other brand. In fact my recent experiences with my 2019 500x lead me to believe that they are actually really competitive. I just purchased a replacement oem windscreen from Honda and it was only $75 AUD which is less than half the price of any decent aftermarket screen. I have had similar experiences with my 2015 CRV. As all our parts come from Thailand now perhaps the old saying doesn’t apply anymore?
Both are...for different reasons. If you live in mild or colder climate, 30 is better because it's not as thick. If you live in very hot climate like I do, 40 is better to keep engine cooler in the extreme heat. I sometimes use 30 in the winter months. But I always switch back to 40 in the spring/summer.
Mine is the 2013 model with over 40,000 miles. If you watch the video, I show you exactly how mine was leaking and where you should check yours to see if it's leaking.
@@MotoPhotoAdventures I have a friend who has a 2013 model and he has clocked over 100000 km with no major problems and another who owns a nc750 with over 220000 km on original engine
WOW!!! That's awesome, @@crispernator! My bike has been super reliable, other than the leaky water pump. Even that was no bid deal...just a few hours and a little over $100 to pull out the old and put in the new. Hopefully the new one will last me the rest of the life of the bike, which I fully intend to ride to 100000 km. :-)
Gotta love Honda. But ya know, if it wuz a Harley, you coulda fix'd it wit a hammer and a big ol' wood handle screwdriver... but it would prolly pee out all your coolant on the next poker run... and if it was a BMW, it'd be a BMW tech only repair needing special BMW dealer tools, a BMW Master Technician, and the proprietary BMW service computer... and the bill would have been $1198 plus tax. "Our shop has an opening for you on the 17th of October." :)
I'm 66 years old. Considering riding again. I liked this motorcycle. But can tell you this is a deal breaker. Honda should have thought this one thru better. This video should never have been needed to make. Instead of a how to...just don't buy this motorcycle
Hi Ken! I hope you'll reconsider. The CB500X is an AMAZING motorcycle! It's actually extremely reliable, comfortable, fuel efficient, and inexpensive to own. I absolutely LOVED all the crazy places this bike took me to. You should check out my 60,000 mile review video here before passing any judgement: ua-cam.com/video/GC2Jx2moLbA/v-deo.htmlsi=xeAqYnqiyxcHF1N8. Remember that every bike is a man-made product. Ergo, there are always going to be strengths and weaknesses. But I can tell you out of all my friends that own everything from Harleys to Triumphs, Susuki's to Yamahas, and even my newly aquired Aprilia...the CB500X had fewer issues and more worry-free miles than any of them. It's not like this water pump will go bad on a large percentage of these bikes. It just happens to be one of the few components that "might". So don't talk yourself out of buying a CB500X just because of that. You could be missing out on 60K miles of smiles and adventures if you do!!! 🙂
Hi! It depends partly on what kind of oil you use. But if you use the recommended factory oil (or something similar), I would follow Honda's recommendation in the book. I change mine every 5,000 miles (8047 km) because it's easy for me to remember that number. 🙂 When I see 52,000...52,500...53,000...etc. on the odometer, I change it.
@@user-bc1tm9ko8p yes, I would definitely go with what's recommended in the manual...unless of course you are using your CB500X in a race or for other extra-heavy-duty uses! I have over 58,000 miles now (over 93,000 km). It still runs great!
This is the first video I've seen of yours and it's very well made. Throughout watching this and with your sense of humor I couldn't help thinking that you were the Dad I should've had 😂. Well don't sir be safe out there
Glad you enjoyed it! What a nice compliment. If you liked this one, I have an entire playlist about the CB500X. Plus I highly encourage you to check out the travel videos where my friends (with equally goofy senses of humor) explore the planet. 😀
Aftet this video, I trust him more than my Singaporean "mechanics". Thank you for sharing your knowledge.
You're very welcome, Abdul. Subscribe and check out some of our other viddos! :-)
You mean malaysian ones hahaha most sg mechanics are from malaysia
Thank you for this. I just finished replacing my pump. Your video gave me the confidence!
That's awesome! Glad we could help.
I loved this video! I'm having the same leak with my 2019 500F (last without LED screen) and I started getting pretty nervous, thank you for your videos, you do an amazing job, greetings from Chile!
Desde Perú....muchas gracias por el vídeo.
from Peru, thank you very much for the video
De nada, amigo! 👍
thank you for this video, its the same process on a CB500F and really helped me. Sucks that this part is so prone to failure
Glad we could help! It's unfortunate. But otherwise this is such a reliable, affordable, and enjoyable bike to own and ride!!! 😁
I have had 4 CB500s and 3 have had waterpump dribbles from the weep hole , but never a major leak . the last one replaced under warranty after 400mile from new and even that one leaked at 3000miles
Thanks for confirming!
I've replaced the water pump on my 2015 CB500X 4 times in 32,000 miles...and I'm on my way to needing a 5th new pump. FWIW, I don't drain the oil, I use a syringe to suck about a pint or two of oil out of the filler hole -- this drops the oil level just below the water pump, so you can pull it off w/o oil leaking out.
Great tip, Jim! That's crazy you've had to replace yours that often!!!
Well, if you're about to change the water pump for the 5th time then there's something you're doing wrong. 😅
Have you tried to replace the original seal and o'ring for a better more resistant one? 😉
Outstanding tutorial. I'm scared to know how much a dealership would charge for this parts and labor 😳. Knowing the weep hole drip clue is great shared knowledge for a novice like me. Thanks for posting this. Sub'd
Thanks for commenting and subbing, Neutral! We've got tons of fun CB500X and motorcycle adventure content for you. :-) Have you done the 16T sprocket upgrade yet? Check out that video...
@@MotoPhotoAdventures I watched that and was like hmmmmm. A buddy of mine and another dude suggested doing that. I might in the future, but I literally just putz around the back country roads in the rural farm area I live in. No interstate or prolonged high revs. I did however key in on you saying less vibration with it. Other than that for my mediocre riding I don't think I would utilize the 16t much. On another note your presentation skills and on screen abilities are superb. Keep it interesting, educational, and entertaining. Looking forward to viewing your stuff. 👍
@@findingneutral thank you for those kind words! We have fun doing these...glad you enjoy them and find them helpful! Check out our adventure videos too! We just released a new one today that is EPIC!!! Hit the notification bell to get a ping when new ones come out. :-)
Mine did that from the 1st week that i got it.. model 2015. I kept taking it to the dealer for 3 months with half ass fixes, until finally they admitted it was unacceptable and changed it.
Sorry to hear that. Glad they got it replaced. They were right to do so. Hondas are normally bullet proof. Too bad a few of them have this one little weak link. Fortunately I think it's been fixed on the 2018-present models!
Very good video..... please share detail video on cb500x GOOD and bad
Glad you enjoyed it! Here's everything you need to know about the CB500X after riding it for 60,000 miles!!!! ua-cam.com/video/GC2Jx2moLbA/v-deo.htmlsi=LXHJc79xcCSiDEa0
Geeze, that oil you drained looked new !
It hadn't been in there very long. But I wanted the peace of mind that comes with getting that leak fixed!
Dip the hose end in very hot water, should slide right on.
Excellent tip!!! Thanks for sharing.
Aha! A bit of googling on an online catalogue and I've found that Honda have updated the part. Changed the 'MGZ' for 'MKP'. I don't know what is updated or if the new part will for older bikes though.
Excellent research skills @mickleblade!!! So what model years does the MKP cover, vs the MGZ?
@@MotoPhotoAdventures according to bike-parts-Honda the MKP is 2022 onwards
@@mickleblade awesome...thanks! It'll be interesting to see if it's the same item, just a new catalog number...or if they've actually redesigned that sprocket for the 2022 model.
@@MotoPhotoAdventures an update, comparing the fiches, the only parts difference are a pair of bolts, parts 8 & 9.Their sizes are the same but they've added a code S-NSHF to the description. I feel it's unlikely to be a magic fix but what do I know, total cost to change them is ~15 euros
@@mickleblade thanks for sharing! YOU ROCK!!!
Great video one of the best how to videos. One of the best I have see thank you. Ride safe my friend.
WOW!!! That really means a lot Mo! Thank you for the kind comment. Have a great week...
Dude, great step by step video
Thank you so much, Mario! I hope you can help us by Subscribing to the channel and sharing the video on social. Check out some of our other videos on the CB500X, and our adventure travel videos. Episode 42 of the Trans-America Trail is pretty epic Cheers! Cheers!!!
Great video thanks so much.
You're very welcome!
Fantastic ,thank you :)
Glad you liked it!
Thanks! I will be doing the same thing this month.
You're very welcome. I hope it helps!
FWIW...... most liquid cooled bikes do weep a bit..... it is from the mechanical seal inside the pump. Unless it's leaking enough to puddle it really isn't necessary to change it.
Thanks for the tip!!!
many people are replacing it unnecessarily thinking its faulty. LOL
@@rv6569Witam czyli jak lekko się poci przez otwór przy pompie to nie takie straszne i wstrzymać się jeszcze z wymianą?
@@m...2778 hello sir. Kindly translate this in English pls
Great vid mate...the w.pump will coast $$$×4 in malaysia
Thank you my friend! I'm sorry it costs more in Malaysia. :-( But it's an easy fix if you need to replace it!
great video and explained very well ,gives me confidence ,if i have to do this myself ,thank you
Thanks PB!!!
Great video thanks mate, I see you're a rugby fan, serious butt kicking from our boys this weekend, not sure if it does the game in that part of the world any good though. Thanks for the great videos
Thanks for the comment, mate! I'm a professional photographer and had the pleasure of photographing a few games over the years. That's one of my shots that won an award. I've been to New Zealand and LOVED it there! And yes, I do own an All Blacks jersey...HAHA! Anyway, glad you enjoyed the video!
@@MotoPhotoAdventures its a great action shot well done on winning an award with it that's pretty cool.
@@deepsouthNZ thanks! And best part is, they let me keep the giant display of it at the end of the show...so I tacked it up in my garage!!! ;-)
16:33 hahaha pure comedy...great job man, liked and subbed!!
HAHA!!! Glad you enjoyed it, Ahmed! We don't take ourselves too seriously. ;-) Thanks for the sub. If you like good-natured humor mixed with lots of motorcycle stuff, I hope you'll check out some of our adventure videos like this one...ua-cam.com/video/1nMIH2yxRR8/v-deo.html.
@@MotoPhotoAdventures I sure will... thank you.
2013 CB500XA
@@80a7x that's awesome! Mine is a 2013 as well. Best upgrade I ever did to mine...ua-cam.com/video/icaJFIgS_a0/v-deo.html
I got the 2019 version. I’ve noticed that little drip around 5 000km after I bought it. Almost 12 000 km and Still got that drip, but my coolant level remains between min and max lines.
Your video just made me realize that my bike might have a water pump sealing problem. I’m gonna try to replace that pump using warranty ...
Really good video, subbed ! :)
Hi Heri! Thanks for the sub. Yes, definitely talk to the dealer. Hope they can get you fixed up under warranty!
You probably dont care but does any of you know of a way to get back into an Instagram account..?
I was stupid lost the login password. I would love any help you can offer me.
@Frank Issac Instablaster :)
@Omari Mordechai Thanks for your reply. I got to the site thru google and I'm trying it out now.
Takes a while so I will get back to you later with my results.
@Omari Mordechai It did the trick and I actually got access to my account again. I am so happy:D
Thanks so much you saved my account!
Have you contacted HealTech who makes the SpeedoHealer? You might also find it in their documentation: www.healtech-electronics.com/products/sh
Really well-done video. Enjoyed it very much. Mine doesn't leak still good info to have.
Thank you so much, Shane! Hopefully you don't ever have the problem. But share it with your friends in case someone else out there could use the help! :-)
nice job guys!!!
Thank you, sir!
@@MotoPhotoAdventures your vids are so informative!!!
@@TheDorminor I really appreciate that!
Just a thought, but would a new “O” ring have cured the leak without the need to change the pump? I don’t know much about this but it’s strange Honda sell just the “O” rings separately. Maybe a number of the reported water pump failures on the CB500X are in fact just simple “O” ring leaks.
Funny guy, but very good! Thanks!!!!
Haha! Glad you enjoyed it!!!
You mentioned Australia , well done mate😅.
Thanks mate!!! My wife's best friend is from Geelong, near Melbourne. She's been Down Under many times. I've only been there once. But I fell in love with the place! Cheers...
Thanks for sharing, Chris and Jason! Nice work guys! I usually don't perform such jobs myself, but watching you doing and explaining is kind of inspiring!
ps: Never saw an underwear with human faces on it! What are those pictures doing on an underwear for goodness sake?! :-)
Hahaha! Faces on underwear! LOL
HAHA!!! I think it's an old Star Wars theme underwear. Hey, my wife says I'm still just a teenage boy at heart! ;-) Anyway, thanks for the comment. And just so you know, I'm not a natural mechanic. I've slowly taught myself how to change my own oil, replace parts like battery and muffler, even install the Rally Raid suspension. So if I can learn to do these things, so can you!
Brilliant, thanks
Happy to be of service!
Hmm.. how is that front sprocket wearing? Good video 👍
Thanks Kevin! It's starting to get a bit worn. I'll probably replace it soon. Definitely going with the 16T size again, which I upgraded to several years ago: ua-cam.com/video/icaJFIgS_a0/v-deo.html
@@MotoPhotoAdventures ..... 16 TOOTH EVERY TIME.
very helpful thank you
You're very welcome! Glad we could help. We have lots of other "How To" and Review videos for the CB500X on the channel, as well as lots of great CB500X adventure videos. I hope you can help us by Subscribing, and enjoy the rest of the videos! :-)
Thank You .
Thanks for watching. Glad we could help!
Hi there! Nice videos, I have just bought my 2022 cb500x and seems your videos will guide me in.
I’m pretty sure this question been asked before but where did you get your engine guard? 😅😅😅 .
Thanksss
Hi Agezzio! Welcome to the channel. You are going to love your new bike!!! My engine guard is from Givi. You can see all the accessories on my bike by visiting our website at: motophotoadventures.com/the-bikes/. Also, we have lots of tutorials and reviews about the CB500X on the channel...as well as fun adventure rides with it. Please like and subscribe to learn more!
I missed the chain guard spot. Mine fell out while taking the pump off. what held it on if it wasn’t the same bolts holding the pump on? Being it didn’t fall out until i removed the pump.
Hi Jordan! The chain guard just sort of "hangs" in place. Then when you tighten the bolts it gets "squeezed" to hold it in position. You might want to watch our chain and sprockets video where you'll see more about the chain guard: ua-cam.com/video/Je6LdgYt9fg/v-deo.html.
@@MotoPhotoAdventures great, thank you!
How do i replace this on my air cooled bike ?
HAHA!!!
Did you disassemble old pump ?
To find the reason .
Hi Tom! I didn't disassemble it since it's not really a "parts serviceable" piece. I just did my research as to the cause of the leak and replaced the whole part.
Hi Chris, I did subscribe. I enjoyed your water pump replacement. I was going to asked how many miles you had on it when it needed that replacement but I kept reading the comments until someone else asked it. I've never owned any of my 64 bikes long enough to put that many miles on them so if mine lasts as long as yours, I'll never have to do that job. But there's guys that had them start leaking a lot earlier so I might not get so lucky. It does appear to be a recurring problem that I feel Honda really should address. There's a weakness in their design someplace. I wonder if the newer ones (2022+) are still going to have that problem? Hopefully Honda finally did something about it so maybe I won't see that problem, but I wouldn't count on it any more than Kawasaki fixing the "doohickey" problem on the KLR650.
Thanks for the Sub, Spydie! You're absolutely right, it would be nice if Honda changed something. But honestly, I don't think this issue is nearly as prevalent as the doohickey. My bike is one of the original 2013 models. There doesn't seem to be a rhyme or reason as to when/if this issue pops up. But I have a LOT of friends who own this bike (maybe we became friends because of that connection?), and none of them have had this problem. I think it's less common with newer models. So hopefully you'll be fine. Just ride and enjoy your machine! If for some reason you do develop a leak, now you know how easy it is to fix. 🙂
@@MotoPhotoAdventures you may have seen on my channel the comparison I did last week between the CBX and the VX. The hose/piping on the VX is a lot cleaner/less cluttered than the Honda, but I don't know what the chore is to change the water pump. I don't think anyone ever had to do that on a VX. ha ha
@@spydie that's interesting! I'll check it out. Thanks for sharing!
Sir, regarding the sprocket upgrade, is it just plug and play? No need tune up or ECU programming? Thanks
That is correct! No need to change anything. Just swap the 15T stock sprocket for a 15T and you're all set to go! It's an easy and inexpensive upgrade. It will change the accuracy of your speedometer. But I use a GPS on my bike anyway. So I use that to determine how fast I'm going, not my speedometer. If you want to calibrate your speedometer to match the new sprocket, I recommend the SpeedoDRD DRD-3 from 12 oClock Labs - amzn.to/2Pahs8C. It's a plug-and-play piece of electronics that you clip into place and adjust your speedometer accordingly.
Hi, i changed my motor oil and i give it a 10W30. I live in Czech Republic and there is about 30-35 degrees celsius in summer (86-95 Fahrenheit) it is good choice or should i go with 10W40?
I often use 10W-30 in winter and 10W-40 in summer. If it's very hot, 10W-40 has better high-temperature viscosity.
Aha! Now that you have removed the water pump, I see where the oil would be. But it seems like you would only drop the oil level a little bit
So you wouldn’t spill any oil on the floor.
Hi Doug! That is correct. You don't have to completely drain it if you don't want to. Some people just siphon some oil out of the tip filler cap to be safe. But it was about time for me to change mine anyway, so I went ahead and dropped all of it.
Have you ever checked or adjusted the valves on your bike?
Hi Sypdie! I had them checked several years ago. They were still within spec. So I haven't bothered since. I did buy new spark plugs, thinking I would tackle that some day. But it's such a major project, and the bike is still purring like a kitten, so I haven't bothered yet. :-)
@@MotoPhotoAdventures Thanks. I was wondering about that. A friend had his shim/bucket valves checked on his Kawasaki Concours at 15,000 miles and they were still in spec, but the labor cost $1200. I'm thinking they are something to not be concerned about and like you said, it is one heck of a big job to do, and very costly if you have to hire it done. And it's hard to tell if they really need it (the bike will still purr like a kitten) until you burn an exhaust valve! LOL. All my bikes until the Versys X and this one have had the old mechanical valve adjustment and I always adjusted my own. But I seldom keep a bike long enough to get enough miles to have to adjust a shim/bucket system.
@@spydie HAHAHA...well I guess that's always a good excuse to keep selling old bikes and buying new ones. That way you don't have to worry about major services like valve adjustments! 🙂
Nicely done. But, how long will the new water pump last if it's the same as the old one?
Hi Thomas! It's pretty much indefinite. The problem is in quality control. Occasionally these "affordable" adventure bikes get one installed that has a slightly crooked shaft or other defect. The problem rises to the surface right away. I bought my bike with only 2,000 miles on it from an owner who rarely rode it and always kept it in the garage. But it already had a little moisture around the weep hole. It's not a major issue, so I lived with it for the next 40,000 miles until it got bad enough that I needed to do something. I inspected the new one before putting it in and it looked perfect. The weep hole has been dry as a bone over the 6,000 miles I've ridden it since. Most CB500X owners never have a problem with it and the original water pump lasts the entire life of the bike. Unfortunately, mine was one of those with this known issue from the day I got it. But this simple and inexpensive fix has it back to good-as-new!!!
my fried kris i have a problem with my cb500x 2020. i have done 3200 km and i noticed that the cooler tank is empty. i filled it and after a few rides the level lowerd again. the water pump did not hade a leak. what is the problem ? what can i do? thanks a lot
Hi Helen! The first thing I would do is check the radiator. You'll see how to access it while watching this video. If the radiator fluid is low, it draws coolant from the overflow tank to compensate. I would make sure the radiator is full of coolant first, then fill the overflow tank to the top mark, then see what happens. If the overflow tank continues to drain at a rapid pace, have it checked by a professional. And for the record, I am NOT a professional!!! :-) I hope this helps!
Hi there, which brand is your skid plate? thanks
Hi Ehsan! It was made by a company called Motea in Europe. I don't believe they sell it under that brand anymore. But it's very similar (if not identical) to the one you can find on eBay that's being made in China. I hope this helps!
Greetings from Ireland, purchased a 500x last November, moved down from a yam tracer 900. Enjoying the 500 very much!
Three questions if you dont mind:
1. tyre type ur running?
2. should the new water pump not be covered under warranty?
3. Is the new pump an upgraded version of current one?
Regards Dermot
Hi drDer! Thanks for watching. I'm glad you're enjoying your CB500X. :-) To answer your questions:
1. Continental TKC80 front and back. LOVE them! Check out some of the AMAZING adventures they've taken us on: ua-cam.com/video/Im8M-tRJXuY/v-deo.html.
2. My bike is a 2013 model with over 40K miles on it. No warranty, I'm afraid.
3. Nope. The old pump simply started leaking after several years. Many CB500X owners have reported the same issue. The new pump is the Honda original part. Only reason to replace is if yours develops a leak.
Hope this helps!
Thanks from the prompt reply, stay safe Chris
@@glenbawndog that is exactly what I was wondering as well. If this is a week part to such a good overall bike, you would think they would do an improved part.
I don’t see how it would be possible for oil to mix (invade) with the coolant. That would be very bad in any internal combustion engine. So I don’t believe you would have to mess with the oil when changing the oil pump. Unless you have a head gasket problem and the oil and gas is mixed!
After seeing it out, it doesn't look like oil would get into the cooling system, but you would lose it all over the garage floor. Probably could lay the bike on its side to avoid draining the oil.
What can result from a bad water pump? Overheating or just inefficient running? Any major issues?
Hi Joseph! Mine wasn't a bad issue. There was no damage to anything...just leaking coolant at the weep hole. It started out very minor...but got worse over time. I put thousands of miles on it even after I discovered the problem...the only issue being I had to top off my reserve tank with coolant more frequently. But I could tell it was only getting worse. Which is why I went ahead and replaced it. I hope this helps!
Surely not all kinds of oil, just one kind of oil.
That cameraman can really shoot! Bahahaha!
Yes he can!!! :-)
Mine started to loose coolant through the weep hole in the pump, it was wet from new. Finally got the dealer to replace it under warranty, replaced at 2000 miles. Took it in twice before they fitted the new one. Poor engineering!!
Sorry that happened to you...but glad you got it fixed under warranty!!! :-)
@@MotoPhotoAdventures Thanks Chris. It doesn’t give me a lot of confidence with other Cb500x owners having the same problem. I had a test ride of a 2021 Himalayan and quite liked but for my knees hitting the edges of the fuel tank. Where I live in the North East of Scotland the roads a
Sorry about that, got interrupted and pressed the send button. As I was saying, a Himalayan would be ideal for where I live, lots of small roads and tracks to travel on.
@@johnbaker7626 the Himalayan is a nice bike. But I think the CB500X is a better bike in almost every way. The water pump truly is not a rampant problem. You got it replaced early. So you should be good to go! Mine happened at over 65,000 miles! If you want to do a lot of gravel and off-road riding, check out my review video of the Rally Raid suspension...truly an excellent upgrade!
MAJOR 2022 UPDATE NEWS!
If Honda updated the 2021 CB500X, they really updated & actually made better the 2022 CB500 line. Today (Sept. 1st) Honda unveiled *_major_* improvements to it.
A happy minor improvement to the 2022 CB500X is _much better color scheme compared to the 2021 (IMO).
Did they fix the water pump for 2022? I wonder.
Thanks for posting, SweetCostaRica! I see they've made some nice improvements. I'm looking forward to hearing people's reviews as they become available. Pura Vida!!!
@@Victor-vf1fi Do a word search: 2022 Honda CB500X or the other 500s. All of the reviews start with what they did to improve the new model(s). Whether you think the think they are improvements is another matter.
mine is 4y 25kkm and still going strong :)
Has anyone asked why is the pump leaking?
Was it oil leaking from the water pump area and not coolant? I seem to have an oil drip coming from there but not losing coolant. I picked my bike up used with 1800 miles 2017 model recently. It isn't a bad leak but I want to address it at my next oil change. Hopefully this will fix it. I have read that this is a common issue with these bikes
Hi Capt Z! I'm not sure what's dripping from yours. But if it's dripping in the same area, a new water pump is definitely what you need!!! Luckily, once you replace it, you should never have to do it again. :-)
@@MotoPhotoAdventures upon further inspection my coolant tank was at the low mark so a new pump is on order! Thanks for the great vids!
@@krazokid19 you're very welcome!
Doesn't Honda recommend 10w30 oil in the manual? I see you changing it with 10w40. Care to share your thoughts about this? I have an open discussion since years with my local mechanic about this... can't win apparently!
Hi Mario! I can't remember what is listed in my manual. But during the summer, it gets really hot and humid here. So during the summer months, my local dealership recommends 10w40 to keep the engine a little cooler. During the winter I switch back to 10w30.
@@MotoPhotoAdventures thank you for replying, I will have another discussion as soon as I can... after 33k km I don't want to run into problems, warranty us a thing of the past :(
@@miticivisivi you're very welcome! Honestly there is very little difference in the weight of 10w30 vs 10w40 oil. You're not going to damage anything by using one or the other. I would go with the manufacturer's recommendation unless, like me, you live in an exteme environment where one offers a benefit over the other.
@@MotoPhotoAdventures what about 10w50? Summers are pretty harsh where the bike is.
@@miticivisivi talk to your dealership. I'm not a mechanic (or a lawyer)...HAHA!!! I'm just sharing what I've been told by my local dealership for the conditions I live in. :-)
And did you check the hoses for the cracks or if they get crumbly?
Removing the hoses to replace the water pump, they were clearly still in great shape. So no need to replace them yet.
Should this be pretty close to 2021 cbr500r? Was thinking about replacing the gasket but everything I came across says just do the whole water pump. For me seems like its seeping out where the gasket is really really slow. Cleaning my chain tomorrow so I can get a really good look at it.
It's the same exact engine on both bikes. So I would just replace everything like I did. You'll have to disassemble everything twice if you replace the gasket and it doesn't fix the leak.
Thanks, my job this weekend 😭
You got this!
Turned out, the bleed bolt on the water pump was loose. Tightened it up and no more leak.👍
@@hvt8147 that's awesome! Well done!!!
My shit dumped all its coolant and the water pump was leaking consistently so hopefully a new pump will work?
Oh no! That sucks man. Hopefully replacing the pump takes care of it. It's pretty easy if you just follow the steps in the video.
Did the new pump start leaking again?
Nope! No problems with the new pump.
@@MotoPhotoAdventures thanks mate I'm about to change mine now and I was a bit worried about the new part did u bought an OEM or original part?
I bought the OEM original Hands part. It was quite affordable.
Chris - how many miles on your bike when you did the pump swap out ? Thanks for posting the vid.
Hi Stunt Driver! I have 68K miles on it now. So that was probably around 65,000.
Aren’t water pump supposed to leak like that by design? How much fluid were you leaking? And was your engine overheating?
Hi Karl! That's a negative. The occasional drip is one thing. Constant leaking from the weep hole is an indicator that something is not healthy with the engine. It was bad enough that I started parking the bike on cardboard because there would almost always be a drip or two underneath it after ever ride. The engine wasn't overheating. And I probably could have just kept running the old pump as long as I continued to check the overflow tank and topping off the fluid levels. But with several long-distance trips coming up, I felt better just fixing the problem. It hasn't leaked a single drop since I replaced the pump back in February. :-)
Hey mate, what pannier racks you running to support the Nelson Rigg bags? Cheers
Chris and I both have Givi brand racks.
GIVI PL1121CAM MONOKEY CAM SIDE CARRIER FOR HONDA CB500X ’13-’18
in newer models its still a weak link? anyone own a 22 type ?
I don't believe it is. Many changes were made to the CB500X after 2018. I don't hear of many newer bikes having this problem. And even if they do, this bike is so reliable that when I say "weak link", it's STILL a more reliable engine than most other adventure bikes out there! Honda has a reputation for excellent durability and longevity in their motorcycles. I certainly would never choose not to buy a CB500X because of the Water Pump issue.
@@MotoPhotoAdventures oh thanks for the answer i hope i can affor a brand new in 2023 but my friend said its not made in Japan anymore its made in Thailand any word on that?
@@pakssmsjsjsks8596 I'm not familiar with the new 2022/2023 model. But even if they move manufacturing to Thailand, I don't think that will affect the quality of this motorcycle. It is known for being a quality bike at an affordable price!
@@MotoPhotoAdventures Thanks!
My 2022now has a small puddle under it. 6k miles
Does the CB500X has a Radiator Fan?
Yes it does...it's right behind the radiator: www.partzilla.com/catalog/honda/motorcycle/2020/cb500x/radiator
@@MotoPhotoAdventures Thanks for answering
@@don_alex_97 happy to help! Google is my friend!!! 😂
@@MotoPhotoAdventures believe me i didn't find anything in Google
What was the mileage when the pump has to be changed? And how do you tell when it needs to be changed?
Hey HightLink! I bet 99% of these bikes will never need the Water Pump changed. So it's not something you need to worry about, UNLESS you start to notice significant leaking at the weep hole. Watch the video to know how to tell. But hopefully you'll never have to worry about it!
@@MotoPhotoAdventures thx for the response and the tutorial, just got a 2016 model with only 6600km and I'm i'm learning how to take care of it.
@@HightLink that's awesome! These bikes are such an amazing value. They're extremely reliable, easy to maintain, and economical to own! We have TONS of tips and tutorial videos about the CB500X on our channel. Whether you're learning how to change the oil, upgrade to a 16T front sprocket (highly recommended), or fixing a puncture, we've got it all: www.youtube.com/@MotoPhotoAdventures/search?query=CB500X. Plus we have a ton of awesome riding videos where I take my 2013 CB500X on trails it probably doesn't belong on...HAHA: ua-cam.com/video/Im8M-tRJXuY/v-deo.html. I hope you'll subscribe and check out what we have to offer...
Hi mate i dont remember if i asked this on the sprocket video but did you have to grind down the chain guard , changing the water pump seems like a pretty simple task i have a 2015 only has 8300km on it so far bought it last year with 5400km hopefully i will have a while before i need to do this work .
P.s we have an old saying in australia
"Honda parts are bloody expensive"
HAHA!!! Love the Aussi saying. By the way, we visited "Down Under" a couple years ago and absolutely loved it! We have good friends that live there, as well as in New Zealand. We really enjoyed your beautiful country...and even got to photograph the Australian Open for a day: chrisandcami.com/the-australian-open/. Anyway, to answer your question, yes I did grind down my chain guard because I thought I heard the chain hitting it after I installed the 16T sprocket. Although after shaving down a good bit of it, I realized I probably just had it installed upside down! Most likely, I didn't have to shave it at all!!! Oh well, at least I have extra clearance now just in case. :-)
@@MotoPhotoAdventures thanks mate i have a 16 but im waiting for my chain to be completly knackered before i change it and the rear
@@crispernator sounds like an excellent plan! Have fun!!! It makes the bike so much more enjoyable. :-)
@@crispernator by the way, check out some of our other CB500X videos like this one: ua-cam.com/video/BMFrt_aPOGM/v-deo.html. And give us a Subscribe if you don't mind! It really helps us be able to keep putting out new content.
Hi Mate, I am in oz also and don’t find Honda parts any more expensive than any other brand. In fact my recent experiences with my 2019 500x lead me to believe that they are actually really competitive. I just purchased a replacement oem windscreen from Honda and it was only $75 AUD which is less than half the price of any decent aftermarket screen. I have had similar experiences with my 2015 CRV. As all our parts come from Thailand now perhaps the old saying doesn’t apply anymore?
Thanks for video...honda oil.10w30 vs 10w40,,,who is better?
Both are...for different reasons. If you live in mild or colder climate, 30 is better because it's not as thick. If you live in very hot climate like I do, 40 is better to keep engine cooler in the extreme heat. I sometimes use 30 in the winter months. But I always switch back to 40 in the spring/summer.
what did you experience before you replaced it. You have the 2019 model right sir?
Mine is the 2013 model with over 40,000 miles. If you watch the video, I show you exactly how mine was leaking and where you should check yours to see if it's leaking.
@@MotoPhotoAdventures I have a friend who has a 2013 model and he has clocked over 100000 km with no major problems and another who owns a nc750 with over 220000 km on original engine
WOW!!! That's awesome, @@crispernator! My bike has been super reliable, other than the leaky water pump. Even that was no bid deal...just a few hours and a little over $100 to pull out the old and put in the new. Hopefully the new one will last me the rest of the life of the bike, which I fully intend to ride to 100000 km. :-)
If the Walter pump shaft isn't aligned with the oil pump shaft, is it impossible to install the water pump right?
Hi Andre! It's very easy to make sure the water pump shaft is aligned properly. It's not a problem.
how many miles on the bike?
Thanks Steve! Over 40K!!!
Pity one couldn’t just replace the offending gasket instead of the whole pump!!! Progress, eh?
I thought the exact same. What a shame!
Gotta love Honda. But ya know, if it wuz a Harley, you coulda fix'd it wit a hammer and a big ol' wood handle screwdriver... but it would prolly pee out all your coolant on the next poker run...
and if it was a BMW, it'd be a BMW tech only repair needing special BMW dealer tools, a BMW Master Technician, and the proprietary BMW service computer... and the bill would have been $1198 plus tax. "Our shop has an opening for you on the 17th of October." :)
HAHA!!! You crack me up, Jim! :-)
I'm 66 years old. Considering riding again. I liked this motorcycle. But can tell you this is a deal breaker. Honda should have thought this one thru better. This video should never have been needed to make. Instead of a how to...just don't buy this motorcycle
Hi Ken! I hope you'll reconsider. The CB500X is an AMAZING motorcycle! It's actually extremely reliable, comfortable, fuel efficient, and inexpensive to own. I absolutely LOVED all the crazy places this bike took me to. You should check out my 60,000 mile review video here before passing any judgement: ua-cam.com/video/GC2Jx2moLbA/v-deo.htmlsi=xeAqYnqiyxcHF1N8. Remember that every bike is a man-made product. Ergo, there are always going to be strengths and weaknesses. But I can tell you out of all my friends that own everything from Harleys to Triumphs, Susuki's to Yamahas, and even my newly aquired Aprilia...the CB500X had fewer issues and more worry-free miles than any of them. It's not like this water pump will go bad on a large percentage of these bikes. It just happens to be one of the few components that "might". So don't talk yourself out of buying a CB500X just because of that. You could be missing out on 60K miles of smiles and adventures if you do!!! 🙂
Hi, every how many km make oil change? In manual right every 12000 km but my dealer told me to change my engine oil every 5000 km.
Hi! It depends partly on what kind of oil you use. But if you use the recommended factory oil (or something similar), I would follow Honda's recommendation in the book. I change mine every 5,000 miles (8047 km) because it's easy for me to remember that number. 🙂 When I see 52,000...52,500...53,000...etc. on the odometer, I change it.
@@MotoPhotoAdventures i use the Original oil from honda. Thx for answer. How many km do you have now?
@@user-bc1tm9ko8p yes, I would definitely go with what's recommended in the manual...unless of course you are using your CB500X in a race or for other extra-heavy-duty uses! I have over 58,000 miles now (over 93,000 km). It still runs great!