Hey Buckin. I ran a ported 562 for a long time. I log in western Massachusetts. I did a logging job and split all the fire wood for the job for the costumer who is a retired logger. He gave me a 462 Stihl as extra payment. Put a muffler on it and it is my favorite saw I ever ran. I get the impression you’re testing lighter saws cause your shoulder is giving you problems. Revisit that saw. It’s similar weight to the 562 but more power. You tested one before. Thanks for all you do. Love you buddy.
Vartan you truly have made a great difference in my life for the content Buckin brings. Sawing is a peace I've never known in any other task and the content Buckin does offer has boosted my ability and confidence in sawing . (I even daydream about it at work)😊 Thank you Buckin and Vartan.
A Shout out to VARTAN!! thanks for letting us dive in to your property and let Buckin make some content!!! Thanks Buckin for your great side by side shots...good stuff brother!!
I'm in Australia and summer is just over. I've hafted a couple of old axe heads and am slowly heading for the wood pile getting ready for winter and a nice old fire in our bedroom.
Love your knowledge, kindness and message of peace feller! I’ve been watching your vids since I really started collecting and using old axes and mccullochs! Keep being a positive influence brother. Much love.
It makes sense to me that the full house chain is faster in the cut than the skip tooth chain because of one simple reason: there are more cutting teeth in the full house chain. To me, the best reason to run a skip tooth chain would be if your saw is slightly underpowered for the length of bar/ size of wood.
Priceless content Buckin, your strong positive force attracts wonderful play grounds like Vartan's , thanks for passing on the blessing to us. I never thought to try starting up my Huskys cold without priming the bulb, I forever think of you every time I touch up chains. I work with my local arborist as his ground man he's always impressed after I sharpen his chains(good practice for me), I tell him every thing I learned is from your sharpening videos, he looks at me with wonder. Thank you.
I haven't had very many problems with the Husqvarna saw mounts. I have replaced the mounts on an old Sthil ms 361 before after my son roughed it up pretty good!🤣😂 I am just a firewood cutter & I have learned from watching you to be gentle on my saws. Keep the chain sharp is a big thing! Goooo Buckin!!
That saw continues to impress! Vartan what a good friend you are allowing us to see and learn. if I was close enough a handshake and a hug would be in order my friend. ♥️👍
Oh man, play more of that song with that harmonica, had me bouncing in my seat 🤣. Used new conditioner on my buckin belts, not as greasy like snow seal, going to put on hunting boots, you could have a winner 🏆
Buckin my friend theses days people are looking for good workers at places and hard to get ones that have a work ethics showing people that you do it make your life better keep being the good person you are and keep smiling my friend
Definitely gonna grab me a hoodie a saw like that would be an awesome replacement from my rancher..thanks for the videos and the opportunity this Channel has helped me through more than most will ever know
Thanks for this info Buckin🙏🏾it’s so helpful for me. I’m getting super dialed in on my saws and chains like I never have because of your help man🙏🏾thanks again heal up. Try putting some collagen peptides from primal kitchen in your morning coffee. It’s been helping me with my body, feeling better. Gives you some soft skin too, you might not want that lol
Love your videos. I watch them every day and just love them for Georgia. I sure hope I win that saw I could really use it here. You’re a great guy with a very good heart friend. God bless you and your family. And yes please be kind. Thank you for giving us something g to look forward to watching. Good clean content friend. Take care Big Kevin Georgia Boy
Just slapped a 28"light on the 362 this afternoon gotta keep that back straight 👍 I'm telling ya I heard that f150 smoke tires all the way to walkers saw shop Billy and I'm over down in NY hahaaaaa
A small word of caution, my bro has a 362 and when we ran a 26" bar it ran well but after a while it wouldn't start. when we took it to the dealer the mech. said the computer shut it down due to too much torque and that bar is too much. I don't know much more than that and am wondering how Buckin's doesn't die as well.
@@madreamer that's a very good point. I know not to try and overwork it with that length bar I have bigger saws for heavier duty I just love not bending over nearly as much. I do thank you for you're input buddy 👍👍👍
whipity whip krakalaka jak....! Oh my goodness I laughed so hard! I'm lazy and am one who deosn't enjoy tool conditioning and cleaning like I really should. That's why I appreciate the skip: whipity whip!
I see/want a shirt that just says smoothidity in quotes on the back across the shoulders. “Smoothidity”. And a little circle or rectangle on the front made from the letters “BBR” over the heart. Long Live Vartan! (Sp?)
Dear Sir, Please explain more fully how a skip tooth chain might perform better after being rocked, hitting a nail, or barbed wire than a full comp. I replayed your reason several times and still I am in a quandary. Thank you for your great content. Peace and happiness (maybe even some giggles).
I believe the point he was trying to get across was that if you hit rock wire or metal, it will be faster to file the skip tooth chain than to file the full house
Bottom line it’s called science .and you and your buddy get something out of it he gets a trail and you get content and you show what really work s and don’t it’s called a win win 😎
My Echo backpack blower has a fuel bulb on it like those saws. Priming or not priming the bulb makes no difference in how it starts. 3-4 pulls in choke, take off the choke and it fires right up every time. Seems like an unnecessary weak point in the fuel delivery system to me.
Looking forward to Donny porting that 562 for you Buckin’. I also look forward to comparison cuts between the Husqvarna 562 Mark II & the STIHL MS 361.
you ran that side by side test slightly more aggressive on the left video. You also would be surprised if you swapped exhausts on the same saw. Every pipe has slightly different characteristics I know you know that. I love the look of the rams horn but the pretzel or the other one might be better for that particular thing you’re trying to compare. I believe the only way to truly run a test is to drop the saw on the log and hover your left hand on the handle and do not rock it. Let the saw cut because 1 ounce of rocking up or down pressure can change the cut. That’s the only way you can make the test fair. I take my rakers down on my 585 and I can rip through a log with the right amount of pressure. Too much and I bind it, not enough and it’s not cutting like I know it can.
Lets be honest - 1st of all there is full comp vs skip comparison. But 2nd there is the time to resharpen each chain also. And 3rd is price. I say this with love people. It is what it is. Tyvm @buckinbillyray
THANKYOU VARTAN FOR LETTING BUCKIN PLAY IN YOUR SAND BOX 👍👍👍👍HOPE EVERYONE IS HAVEING A GREAT DAY ,,WELCOME ALL NEW COMERS
Hey Buckin. I ran a ported 562 for a long time. I log in western Massachusetts. I did a logging job and split all the fire wood for the job for the costumer who is a retired logger. He gave me a 462 Stihl as extra payment. Put a muffler on it and it is my favorite saw I ever ran. I get the impression you’re testing lighter saws cause your shoulder is giving you problems. Revisit that saw. It’s similar weight to the 562 but more power. You tested one before. Thanks for all you do. Love you buddy.
The only problem is he already has a 500i so there's no need to get a smaller cc saw that weighs more
the saw was a gift from Husqvarna. timing was great wasnt it
@@brianallen1205
Ways more than what? The 500i? The weight difference between the 562 and the 462 is negligible
Vartan you truly have made a great difference in my life for the content Buckin brings. Sawing is a peace I've never known in any other task and the content Buckin does offer has boosted my ability and confidence in sawing . (I even daydream about it at work)😊 Thank you Buckin and Vartan.
A Shout out to VARTAN!! thanks for letting us dive in to your property and let Buckin make some content!!! Thanks Buckin for your great side by side shots...good stuff brother!!
I'm in Australia and summer is just over. I've hafted a couple of old axe heads and am slowly heading for the wood pile getting ready for winter and a nice old fire in our bedroom.
Greetings from Germany....
Peter 😊
Same here mate. I'm in the south west of WA and very much looking forward to winter and having our fire running for months on end!
Love your knowledge, kindness and message of peace feller! I’ve been watching your vids since I really started collecting and using old axes and mccullochs! Keep being a positive influence brother. Much love.
hey mike thx
I don’t know what the heck it is about cutting trees with a power saw but I love it
❤ I tell u what it is ,it's simply MAGIC! BUÇKIN is totally enraptured, trapped in the Magic 😊!
It makes sense to me that the full house chain is faster in the cut than the skip tooth chain because of one simple reason: there are more cutting teeth in the full house chain. To me, the best reason to run a skip tooth chain would be if your saw is slightly underpowered for the length of bar/ size of wood.
❤Thank you Vartan . It’s a beautiful place you have . Thank you Buckin for the great video as always
Priceless content Buckin, your strong positive force attracts wonderful play grounds like Vartan's , thanks for passing on the blessing to us. I never thought to try starting up my Huskys cold without priming the bulb, I forever think of you every time I touch up chains. I work with my local arborist as his ground man he's always impressed after I sharpen his chains(good practice for me), I tell him every thing I learned is from your sharpening videos, he looks at me with wonder. Thank you.
great stuff
Thanks Vartan!
Just finished chopping & stacking now Buckin with my lunch great day!
Thank you Vartan! Love you all! ❤️✊
Amazing teacher I've learned so much from you when it comes to filling and now I'm better with the saw so thank you
Thank you for the video Buckin! Have a nice day everyone
Thank you Vartan I have learned a lot of skills and gained a lot of knowledge from the trees off of that place you have! Much appreciated!
I haven't had very many problems with the Husqvarna saw mounts. I have replaced the mounts on an old Sthil ms 361 before after my son roughed it up pretty good!🤣😂 I am just a firewood cutter & I have learned from watching you to be gentle on my saws. Keep the chain sharp is a big thing! Goooo Buckin!!
good stuff
Good video Buckin. This kind of content can teach you something if one takes in all considerations. Thanks Vartan for the playground.
I like that word: playground
That saw continues to impress! Vartan what a good friend you are allowing us to see and learn. if I was close enough a handshake and a hug would be in order my friend. ♥️👍
Hey Mr. Bucking them are some nice looking TWO HANDED cookies no substitute for a fine chain Thank You. Stay healthy 😊
Oh man, play more of that song with that harmonica, had me bouncing in my seat 🤣. Used new conditioner on my buckin belts, not as greasy like snow seal, going to put on hunting boots, you could have a winner 🏆
great brother , let me know . its different fir sure
Buckin my friend theses days people are looking for good workers at places and hard to get ones that have a work ethics showing people that you do it make your life better keep being the good person you are and keep smiling my friend
Definitely gonna grab me a hoodie a saw like that would be an awesome replacement from my rancher..thanks for the videos and the opportunity this Channel has helped me through more than most will ever know
appreciate you
As always my friend looking forward to the next video with those comparisons cuts 👍👍
Good video lots of knowledge . Very capable sounding saws buckin you do know how to file !! Your weather there is very similar to here in Nova Scotia
Thanks for this info Buckin🙏🏾it’s so helpful for me. I’m getting super dialed in on my saws and chains like I never have because of your help man🙏🏾thanks again heal up. Try putting some collagen peptides from primal kitchen in your morning coffee. It’s been helping me with my body, feeling better. Gives you some soft skin too, you might not want that lol
LOVE the trail construction days! They are the best!
good stuff
You are priceless my friend BBR! Stay kind.
Love your videos. I watch them every day and just love them for Georgia. I sure hope I win that saw I could really use it here. You’re a great guy with a very good heart friend. God bless you and your family. And yes please be kind. Thank you for giving us something g to look forward to watching. Good clean content friend. Take care Big Kevin Georgia Boy
Much Love Buckin!!❤️🪵
hey
Hello 👍👍
@@martyrutter3630 Marty!! Hope all is well :)
Thank you Buckin for being there with your knowledge ❤ by the way the ramhorn exaust for the 562xp can i buy one?
I’m looking forward to everything. Love wins 😊
I would be honored to receive that saw Buckin ✌️✊
Just slapped a 28"light on the 362 this afternoon gotta keep that back straight 👍 I'm telling ya I heard that f150 smoke tires all the way to walkers saw shop Billy and I'm over down in NY hahaaaaa
A small word of caution, my bro has a 362 and when we ran a 26" bar it ran well but after a while it wouldn't start. when we took it to the dealer the mech. said the computer shut it down due to too much torque and that bar is too much. I don't know much more than that and am wondering how Buckin's doesn't die as well.
@@madreamer that's a very good point. I know not to try and overwork it with that length bar I have bigger saws for heavier duty I just love not bending over nearly as much. I do thank you for you're input buddy 👍👍👍
Good luck everyone. I’m enjoying my stihl ms 391 with 25 inch bar.
Keep up the jam
Buckins hahaha is like Santas hohoho
Yes man lol
✌️❤️🌲🪵🪓🐝
Love the muffler mod. How do we get our hands on one? At least sell the prints?
Thanks!
Thank you Shaun for your support on buckins channel it is appreciated spread the love increase the peace
✌️❤️🌲🪵🪓🐝
Thank you buckin for giving us such great content. If I could only watch 1 channel on the UA-cam this would be it. Appreciate you bud🤘
thx for that
I'm very curious what you and Donnie Walker figure out what's wrong with the 562. Mine seems to be doing the same.
All that and the argyle back 😃, just stopped in for a little positivity !
Another awesome video, love the detail you put into chain sharpening 💪 you could make t-shirts that say no ski slopes, lol 😂
Bout time u started playing us music again Buckin, love the harmonica
rock star 😀
"Smoothidity" what a great word! Lol. Love it!
Thanks Vartan!
You da man..
Looking at a still today. Which one is the best? Factory square chain
Keep up the Jam!! And a little harmonica and drums never hurt anyone!!
whipity whip krakalaka jak....! Oh my goodness I laughed so hard! I'm lazy and am one who deosn't enjoy tool conditioning and cleaning like I really should. That's why I appreciate the skip: whipity whip!
What pipe would you recommend for a stocl kusky 572 ?
How much do you have to spend for an entry, I heard it other day and don't remember and can't find which video it was in.
Good video today. Very entertaining
Nice to see you again. I can see your breath. No worries give her hell.
Billy, I'm doing better with my filing but why don't my files last more than 5 or 6 sharpenings? Be safe
Nice Video .....😀 Greetings from Germany
Peter ( Natur und Hund )
Back on saw and harmonica
buckin great show . sister C need to be look at buddy . 😊
Another great video. Thank you
Even though you're a Husky guy I Stihl like you Buckin'
Hell yeah! Runnin Stihl MS 310 here in ohio.
Amen. T’s Trees here
Bbr have u tried a sister c on a skip?
I have fun watching ya buddy
I see/want a shirt that just says smoothidity in quotes on the back across the shoulders. “Smoothidity”.
And a little circle or rectangle on the front made from the letters “BBR” over the heart.
Long Live Vartan! (Sp?)
Preferably in black if your asking!
Full skip still wins after you account for all the extra time spent filling and sharpening. GET THE GULLET!
where'd you get that cool husky shirt from? shout out and thank you to vartan for the playground access!
Get you a friend like Vartan
Love the Husqvarna shirt
thx
Dear Sir,
Please explain more fully how a skip tooth chain might perform better after being rocked, hitting a nail, or barbed wire than a full comp.
I replayed your reason several times and still I am in a quandary.
Thank you for your great content.
Peace and happiness (maybe even some giggles).
I believe the point he was trying to get across was that if you hit rock wire or metal, it will be faster to file the skip tooth chain than to file the full house
what andrew said
Vartan is the man 👍
You give away saws? How do you sign up for that?
Buckinbillyray.com if you spend $25 it automatically enters you into a draw a winner will be picked at the end of the month
✌️❤️🌲🪵🪓🐝
Bottom line it’s called science .and you and your buddy get something out of it he gets a trail and you get content and you show what really work s and don’t it’s called a win win 😎
My Echo backpack blower has a fuel bulb on it like those saws. Priming or not priming the bulb makes no difference in how it starts. 3-4 pulls in choke, take off the choke and it fires right up every time. Seems like an unnecessary weak point in the fuel delivery system to me.
nice as always
My son has got me and the wife watching your videos, you crack us up. Do you ever sell any of your axes? I’d love to get one for my son.
I really need to pipe my 562 xp (mk 1) based on this video series. Seems to really wake them up
Ahwoooo love it get one 👍
You forgot the helmet because you brought the new truck. The old ones already have everything you need in them, new truck just needs to get there.
exactly
Hi Buckin Billy Ray Smith TV 🌟 🤩 star
Vartan good man
be kind
I know i probably wont win the saw but man it would be insane to own that saw lol atleast i got a awesome hat tho!
Looking forward to Donny porting that 562 for you Buckin’. I also look forward to comparison cuts between the Husqvarna 562 Mark II & the STIHL MS 361.
💙💙
you ran that side by side test slightly more aggressive on the left video. You also would be surprised if you swapped exhausts on the same saw. Every pipe has slightly different characteristics I know you know that. I love the look of the rams horn but the pretzel or the other one might be better for that particular thing you’re trying to compare. I believe the only way to truly run a test is to drop the saw on the log and hover your left hand on the handle and do not rock it. Let the saw cut because 1 ounce of rocking up or down pressure can change the cut. That’s the only way you can make the test fair. I take my rakers down on my 585 and I can rip through a log with the right amount of pressure. Too much and I bind it, not enough and it’s not cutting like I know it can.
If there was a chain better than every other chains at everything, it would be the one everyone uses.. I think...
What exactly is the "sister C"?
5/32 file on a 3/8 chain
@@BuckinBillyRaySmith Thank you
8:15 😛
Maybe someone should write a Buckin' dictionary. Now, wouldn't that ruin the Scrabble players!
how can you win?
Buckinbillyray.com if you buy a T-shirt or spend $25 it automatically enter’s you into a draw to win
Thank you
✌️❤️🌲🪵🪓🐝
I know nobody reads this, but, I never left my initials, I left a reclining chair and bench I made at every job… 20+ years of doing that.
Are you kidding ? I want a professional to break in the saw i,m going to win , just dont scratch the paint. LMBO
Lets be honest - 1st of all there is full comp vs skip comparison. But 2nd there is the time to resharpen each chain also. And 3rd is price.
I say this with love people. It is what it is. Tyvm @buckinbillyray
Thumps up for you as always. @buckin
Thanks!
Thank you Shaun for supporting buckins channel it is appreciated peace love and good health to you
✌️❤️🌲🪵🪓🐝
Thanks for your support my friend. Blessings back to you and your family. 🙏♥️👍