It makes me happy to see tools repaired. I know it's a lot of fiddly work but really it's better. We don't have your kind of services anywhere near me in the states.
@hertygreaser I prefer it, too. It just flows better for me when watching. Also you can still see everything done to the machine and where all the screws are. This information is lost when jump-cutting. Edit: What I mean by that is; one time I was trying to repair a laptop and watched a disassembly video. The creator cut the part where he loosened the screws after the first one. After I removed all the screws the part still didn't come apart and I didn't want to force it because it was delicate plastic. So I watched another video and this time I saw there were not only screws to remove but also a few plastic clips to pry apart. That's why I prefer speeding up over cutting out.
Had a fair few of those DCD996 fans welding themselves to the rear transmission cover like you found there. Really robust motor, hardly ever find burnt stator windings, even after that sort of abuse.
Some lads clean down there tools with break cleaner. I bet this is what happened here. It just melts the plastic to itself. The whole out case was glued solid, and the fan.
Brilliant video as usual. Learn so much from your videos. Have considered going into the repair business too. Do you make a living on your repair business or do you sell new stuff as well?
Mr.Dean I am stunned.You seem to know every tool as the back of your palm.Is there any tool that you have to study think and then repair?Anyway keep doing more videos
Tools fixed in this video: 0:00 DeWalt DCN680 nailer - Fault: Not shooting 8:43 DeWalt DCD996 Drill - Fault: Stuck motor 23:06 DeWalt DCF887 Impact- Fault: Switch 31:41 DeWalt DCH273 SDS Drill - Fault: Problem with rotating of the chuck
What are your thoughts on the Einhell 18v range. I don't think that they are aimed at trades type people, but I've just bought a brushless nut gun and you can register for a 10 year guarantee!!! I've been using their 18v range for about 5 years and in that time I've only had 1 charger and 1 battery die and I'd class myself as a hobbiest/part time handy man. When I bought the nut gun I realised that the tool only price is roughly the same as Milwaukee but I know I'd only be getting a year or 2 warranty with that. Just wondering what you think? Thanks for all the great videos 😊👍👍👍👍
Yes, Einhell is quite good for the money. I think a lot of the Parkside tools are actually einhell tools. And they have a massive following and very good reviews. Never seen one with 10 year warrenty many you. And I'd be questioning the price is its the same as a mileaukee. Also einhell are not just disposable tools like some cheaper brands, they do supply a lot of the spare parts to keep them running outside warrenty.
@deandohertygreaser I just checked again and they are now coming with a 10 year service promise on the brushless motor. Not 100% sure what that covers yet as my new toy hasn't arrived yet LOL Re the price, I was only comparing nut guns of similar power ratings (the one I purchased was a 400Nm Inpact gun). I know that the rest of the range is normally a lot cheaper then the tools aimed for professional use.
Hey Mate..have you ever done repair on bosch go 3.6v screwdriver...done a repair on mine last night. And while it's repaired and works perfect..I seem to have 3 little pins that I didn't even see fall out left over amd for the life of me I can't figure where they came out of ...any ideas..
I don't know what it is but I sleep better at night when I see you add a touch of grease here and there lol. I am weird
Yes you are 😂
Glad to see I'm not the only one lol
It makes me happy to see tools repaired. I know it's a lot of fiddly work but really it's better. We don't have your kind of services anywhere near me in the states.
Been watching for a few days now and this guy is the master
Nice one! Becoming part of my morning routine now watching your repairs with a cuppa! Keep it up mate love the content
Awesome! Thank you!
I enjoyed the decision to speed up the fiddly bits rather than cut them out in editing like you do it a lot of videos.
Good to know!
@hertygreaser I prefer it, too. It just flows better for me when watching. Also you can still see everything done to the machine and where all the screws are. This information is lost when jump-cutting.
Edit:
What I mean by that is; one time I was trying to repair a laptop and watched a disassembly video. The creator cut the part where he loosened the screws after the first one. After I removed all the screws the part still didn't come apart and I didn't want to force it because it was delicate plastic. So I watched another video and this time I saw there were not only screws to remove but also a few plastic clips to pry apart. That's why I prefer speeding up over cutting out.
bon travaille et on a appris beaucoup choses on a un grand plaisir en regardant vos vidéos merci bien
Fantastic work chum
Had a fair few of those DCD996 fans welding themselves to the rear transmission cover like you found there. Really robust motor, hardly ever find burnt stator windings, even after that sort of abuse.
Impressive
Some lads clean down there tools with break cleaner. I bet this is what happened here. It just melts the plastic to itself. The whole out case was glued solid, and the fan.
Brilliant video as usual. Learn so much from your videos. Have considered going into the repair business too. Do you make a living on your repair business or do you sell new stuff as well?
I had the exact same c clip come off on a tool i had in for repair.
Mr.Dean I am stunned.You seem to know every tool as the back of your palm.Is there any tool that you have to study think and then repair?Anyway keep doing more videos
Tools fixed in this video:
0:00 DeWalt DCN680 nailer - Fault: Not shooting
8:43 DeWalt DCD996 Drill - Fault: Stuck motor
23:06 DeWalt DCF887 Impact- Fault: Switch
31:41 DeWalt DCH273 SDS Drill - Fault: Problem with rotating of the chuck
Fantastic idea - thank you
The hammer drillen are way underpowerd
i was told if you screw down the black screw on top you adjust the downward preasure??
Where do you get the long pz1 bits for the drill
What are your thoughts on the Einhell 18v range. I don't think that they are aimed at trades type people, but I've just bought a brushless nut gun and you can register for a 10 year guarantee!!! I've been using their 18v range for about 5 years and in that time I've only had 1 charger and 1 battery die and I'd class myself as a hobbiest/part time handy man. When I bought the nut gun I realised that the tool only price is roughly the same as Milwaukee but I know I'd only be getting a year or 2 warranty with that. Just wondering what you think? Thanks for all the great videos 😊👍👍👍👍
Yes, Einhell is quite good for the money. I think a lot of the Parkside tools are actually einhell tools. And they have a massive following and very good reviews.
Never seen one with 10 year warrenty many you. And I'd be questioning the price is its the same as a mileaukee.
Also einhell are not just disposable tools like some cheaper brands, they do supply a lot of the spare parts to keep them running outside warrenty.
@deandohertygreaser I just checked again and they are now coming with a 10 year service promise on the brushless motor. Not 100% sure what that covers yet as my new toy hasn't arrived yet LOL
Re the price, I was only comparing nut guns of similar power ratings (the one I purchased was a 400Nm Inpact gun). I know that the rest of the range is normally a lot cheaper then the tools aimed for professional use.
@deandohertygreaser I can now confirm, it's a 3 year extended warranty and a 10 year warranty for the brushless motor. Pretty good really 😊
Dean would you ever get an feed back of any of the company’s that you repair there tools
Hey
Mate..have you ever done repair on bosch go 3.6v screwdriver...done a repair on mine last night. And while it's repaired and works perfect..I seem to have 3 little pins that I didn't even see fall out left over amd for the life of me I can't figure where they came out of ...any ideas..
I did it
Eyh Dean, DCH272 vs. DCH133, which is best?
another day, another c-clip.
faltou a legenda em portugues 😒
When the guy who fixes power tools uses Bosch you know right there what you should be buying 😂
well he doesnt use it hard though, so i guess your right