Lay off of the negative comments as well as the stupid questions… this young man has proven himself many times over ……. I would love to have him as a neighbor here in California instead of these loud unintelligent fools we have around here. Keep rocking Simon “ You done good”!
Consider buing a flapdisk for your grinder. You can easely grind down the weldings untill they are smooth. Multiple grades. Keep up the great work nice car and the engine choice is the one you made wisely. I like it keep the oldies on the road. Here in the netherlands nothing is affordeble so be blessed... 🎉🎉🎉😊😊😊
It's almost like people's skills shouldn't be constrained to their age range and instead on a person by person basis! I know plenty of Gen X-ers who are worse fabricators than Gen Z and Millenials.
I see a little bit of the motor on the top of it I didn't see if the distributor was in the front or the back he didn't put a Chevy motor in that anybody know what motor is in that thing all respect I wouldn't doubt it 😉 the guys just good knowledge
Nice to see how thoroughly you do your things! Taking care of both yourself and the vehicles. (Except welding and grinding besides battery) Bless your good work and cool videos. Greetings from an old Norwegian car mechanical working on Fords and Volvos since late 70's
Отличное видео! Поздравляю - ты занимаешься любимым делом и это интересно другим людям. Спасибо за монтаж и атмосферу) Но один момент заставил меня занервничать - ты обрабатывал днище, когда единственной опорой был домкрат. Это небезопасно, тем более что эта машина не из лёгких. Лучше подстраховаться от неприятных неожиданностей. Желаю удачи)
Seems like a vehicle always feels a little warmer when you know it’s good to go for the winter. Nothing worse then laying in a snow bank just trying to get the damn thing going again.
How did you come about your skills and knowledge? I have a 87 f250 and do basic maintenance and repairs but I’m too nervous to do the heavy lifting. I have to replace the steering box next but leaving the exhaust leak to the pros I think.
Living in the rust belt makes it tough for us vehicle lovers to keep them from rotting away before our eyes! I live in Chicago area and have 4Runner so I'm familiar with rust issues.
This is the best way to extend the protection of the chassis. The dust with the wax creates a relatively cohesive mixture that is more durable than the wax itself.
I'm hurtin' right now cuz I love your work ethic and the beautiful job you always do....BUT at 7:55 thru 8:06 there are several deep kinks in the finished lines. What am I missing? Please explain.
It looks way worse with the camera angle. unfortunately I scarred the lines a little when bending but it’s only an aesthetic defect. They’re not kinked shut by any means.
Congratulations on your videos, very good. How much does a car like that cost? Here in Brazil this car costs on average 90 thousand Reais, around 16400 Dollars if you convert the currency, but here you earn in Reais if you buy in Reais, then you earn in Dollars if you pay in Dollars, so it would be the same as your galaxy (name of this car here in Brazil) costs 90 thousand dollars, take good care of it, hugs...
Your channel is addictive. The skills and patience in each work you do, are incredible. How do you know so much about cars?
Congratulations
The low buck upgrade performance well though of art of attack at is best love the Ford 66 right
Lay off of the negative comments as well as the stupid questions… this young man has proven himself many times over ……. I would love to have him as a neighbor here in California instead of these loud unintelligent fools we have around here. Keep rocking Simon “ You done good”!
@@fishypictures He’s skills and ingenuity is absolutely amazing!
Freedom of speech ! Layoff the commands!!
I like the wheels and those poverty caps. They have a shoulder that has a unique esthetic.
But they are useless really,all wheel covers are,they don’t hold the wheels on so……just like a bumper sticker oh well
@bradzimmerman3171 my dad has poverty caps on his 78 motorhome they even have fake chrome 😂
Consider buing a flapdisk for your grinder. You can easely grind down the weldings untill they are smooth. Multiple grades.
Keep up the great work nice car and the engine choice is the one you made wisely. I like it keep the oldies on the road. Here in the netherlands nothing is affordeble so be blessed... 🎉🎉🎉😊😊😊
This guy fabricates like a gen xer, nothing works better than the stuff you make. You should be so proud.
It's almost like people's skills shouldn't be constrained to their age range and instead on a person by person basis! I know plenty of Gen X-ers who are worse fabricators than Gen Z and Millenials.
@HolyGoatsOfSteel I don't
One of the nicest car from the golden years. Congratz from argentina!
I see a little bit of the motor on the top of it I didn't see if the distributor was in the front or the back he didn't put a Chevy motor in that anybody know what motor is in that thing all respect I wouldn't doubt it 😉 the guys just good knowledge
Thanks again,Simon and greetings from Chile🇨🇱
I like the brace/ pan shroud/ jack point. Well-done my friend.
Brilliant video man!
Thank you!
I think it's pretty cool that this is your daily driver!! Great video!
Thanks!
Awesome filming and editing. Love that you don't edit out mistakes. Much more captivating without commentary. 10/10 thanks
when you change the oil filter, you can pierce it and drain the oil and then unscrew it
Yup,… I pop a hole with the point of my chipping hammer and go have a cup of coffee.
Love your work, your car and your dogs!! Excellent videos!!!
Nice to see how thoroughly you do your things! Taking care of both yourself and the vehicles. (Except welding and grinding besides battery) Bless your good work and cool videos. Greetings from an old Norwegian car mechanical working on Fords and Volvos since late 70's
All this things I made hundred times in my cars. But I never thought all this so interesting, like in your videos! Thks!!!!
Your channel has to blow up soon. Great videos
Pulled a "Ghostbusters II " on the undercarriage.....excellent sauce 👍
So much torque it twisted the chassis. Nice video, I like the no commentary videos
Hello from the guy from other side of the Earth, who enjoining fixin cars and garage thematics!
Keep it up!
A real good looking car! and sounds great too! let it rrrrrrroooooaaaarrrr forever! enjoy, young man! greetings from France!
Great video! I'd love to see how the oil treatment held up against road salt, I also drive my bug in the winter...
Отличное видео! Поздравляю - ты занимаешься любимым делом и это интересно другим людям. Спасибо за монтаж и атмосферу)
Но один момент заставил меня занервничать - ты обрабатывал днище, когда единственной опорой был домкрат. Это небезопасно, тем более что эта машина не из лёгких. Лучше подстраховаться от неприятных неожиданностей.
Желаю удачи)
Living in the AZ desert, I’m impressed by your MN skid plate! You could make a fortune making those out here!
Good job mate 👍
i love what you do!
This guy is a regular McGuyver!
Man, I had flashbacks to ghost busters when you started that undercoating, lol.
Seems like a vehicle always feels a little warmer when you know it’s good to go for the winter. Nothing worse then laying in a snow bank just trying to get the damn thing going again.
6:31 - God , I felt your pain. you really need a FFS swear cloud there or something. Awesome channel, silence is golden!
Love the way you do cars ! 👍
Body on frame RWD American Muscle on a dirt road.... Don't get much better gentlemen.
Great video
Precisa fazer um curso de soldagem!!!! Seria muito bom.
Good stuff man.
Lovely Ford, sir!
Very good
I like your Ford V8, this is a Fun car!!😁
Love the car!!!
Exceptional!
loved the dogs at the end. goofy fellas.
Great video Simon........are you self taught? you are very good with all aspects of auto's and prefab..........Miles
Bom demais cara.
Do it to it simon
very good job i like to see your video thanks
Love the car sweet🎉
Would appreciate knowing what how and why of your tasks
Less talk, more work....
Best wishes
How did you come about your skills and knowledge? I have a 87 f250 and do basic maintenance and repairs but I’m too nervous to do the heavy lifting. I have to replace the steering box next but leaving the exhaust leak to the pros I think.
❤🎉
The dogs want to know if the BMW and the Ford are OK.
Curious on how you learned so much about cars. Was it a combination of school and self taught? Love your content.
In time all clothes become work clothes. Even the Uggs.
😎👍
Great video bro, but just out of curiousity , is that 3 fuel filters attached to each other in a row?
The center one he wrapped is a pump the other two look like pre and post filters, I could be wrong but that’s what it appears to be
Semangat mr senang melihat vidio anda
Why the chain oil over Fluid Film or Wool Wax? I like that they offer the black variant for undercarriages
Hey man, is your welder 220 or 110? Love your channel!!! Very inspiring!
mustie1 bar n chain oil and dusty road treatment
Right, ha. Except I picked the wrong brand of bar and chain oil
It's looking good. Quick question, what do you use to record?
4.0 in shop I am guessing
❤
Living in the rust belt makes it tough for us vehicle lovers to keep them from rotting away before our eyes! I live in Chicago area and have 4Runner so I'm familiar with rust issues.
I would have waited to drive on a dirt road after oiling the undercarriage😮
This is the best way to extend the protection of the chassis. The dust with the wax creates a relatively cohesive mixture that is more durable than the wax itself.
Hello, which car do you like more? Pickup or sedan?
👏👏👏👏👏👏👏👏👏👏👏👏
I'm hurtin' right now cuz I love your work ethic and the beautiful job you always do....BUT at 7:55 thru 8:06 there are several deep kinks in the finished lines. What am I missing? Please explain.
It looks way worse with the camera angle. unfortunately I scarred the lines a little when bending but it’s only an aesthetic defect. They’re not kinked shut by any means.
What’s he doing? What’s the thin piping?
Fuel feed and return lines
Congratulations on your videos, very good. How much does a car like that cost?
Here in Brazil this car costs on average 90 thousand Reais, around 16400 Dollars if you convert the currency, but here you earn in Reais if you buy in Reais, then you earn in Dollars if you pay in Dollars, so it would be the same as your galaxy (name of this car here in Brazil) costs 90 thousand dollars, take good care of it, hugs...
Just as a single observation, use safety towers, not just the hydraulic jack.
Nice car! Is it a galaxy?
So what's with that push bar in the front what is the significance of that?
Pit manouevres
Need winter tires
I don't get it. Is this 3 fuel filters in a row/ in line?
Probably not. The middle roller's probably an electric feed pump. Simon installed a wire to it.
Minisoda, the frozen shithole of Hoth.
ur such a gangster
Привет из России. Обожаю заднеприводные авто. Это классика.
🚙🚙🚙🚙🚙👍
I was curious why you went from the 66 to the 65 Ford?
Rust issues
@@SimonFordman Thanks
Wait deh?....you look like Bob Marley, dreadlocks Rastaman 1:18 minutes
You should just paint the underside of your car for more protection
With as much salt as they get paint wouldn't't even last for 1 winter .. The oil with the dirt gives the underside a nice thick coating..
Love the car, love your videos but I Have to ask , what is the purpose of the yellow covered lights?
Looks cool, i think