Looks exactly like an iShift. Just did one the other day. Same clutch cylinder too just different connection. Does the clutch cylinder need to get pushed back before installing? Does it also have a air hose attached to it?
Does the tcm need to be reprogrammed if it is disconnected? Just installed a new clutch on a DT12, reusing the actuator; got everything plugged in, but truck just shows -- on the gear indicator.
My cascadia is in the shop for this exact problem right now and was wondering how much a job like this typically range from so I know whether or not this shop is over charging me
Hi Francisco, I have a customer bring in a volvo vnl, clutch pedal not push down at all not an inch, i replace the master cylinder and slave cylinder still have the same problem, i remove the cover plate look inside clutch still engaged. Any ideal what might cause this to happen?
2013 Freightliner Cascadia dd13 I took it to get a pm done and when I got it back my truck won’t turn on unless I spray started fluid. What can it be? It wasn’t doing that before the PM now every time I turn it off only way I turns on is if I spray starter fluid
buenas ..saludos ..me pueden apoyar con el torque de los tornillos del volante de clucht de un cascadia125 motor DD15 por favor, standar de 18 velocidades.
Thanks!
Looks exactly like an iShift. Just did one the other day. Same clutch cylinder too just different connection. Does the clutch cylinder need to get pushed back before installing? Does it also have a air hose attached to it?
Que tal, Para bajar una dt12 necesitas quitar el modulo o la bajas completa
Qué hay, no tienes un video abriendo una transmisión de Detroit quisiera ver cómo se mira adentro
Me uno a la petición ojalá y puedas subir una video para saber cómo desarmarla y volverla a ensamblar.
Does the tcm need to be reprogrammed if it is disconnected? Just installed a new clutch on a DT12, reusing the actuator; got everything plugged in, but truck just shows -- on the gear indicator.
Important question did Fransisco answer your question
Doesn’t need to be programmed just need to do the transmission learn procedure
How much did it cost to get it the new clutch installed bro?
So what needs to be done after clutch is installed? I am a new clutch put in.
Calibrate the clutch actuator, and transmission relearn procedure.
Pregunta es necesario reprogramar después del cambio del cluth y el actuador
Amigo donde está su taller saludos 🖖
Hola Francisco . Me puedes dar el número de herramienta para poder alinear el clutch al momento de instalarlo . Por favor y un millón de gracias 🙏
Ah y para alinear el flywheel también please 🙏
Fransico could you splain if all transsmitions fit all trucks no meter what model thank you
after how many miles did it go bad
Got 836153 out of the one I just replaced.
depend how you driving and houling around 400.000 - 700.000 for sure you will have to change
@@adriantorres8133 that's pretty good, you haul heavy hills, or light and flat?
My cascadia is in the shop for this exact problem right now and was wondering how much a job like this typically range from so I know whether or not this shop is over charging me
Just call other shops and ask
How many miles on your dt12 clutch when it needed to be replaced? How much money? Thanks
Hi Francisco,
I have a customer bring in a volvo vnl, clutch pedal not push down at all not an inch, i replace the master cylinder and slave cylinder still have the same problem, i remove the cover plate look inside clutch still engaged. Any ideal what might cause this to happen?
Un solo disco y no es de broze ?
Francisco in what state your shop is located?
Buen día ojalá subas un vídeo de como desarmar y volver a ensamblar una dt12
You are speeding the video that I'm having trouble understanding how to put the clutch on because of a dow that I need to align
2013 Freightliner Cascadia dd13 I took it to get a pm done and when I got it back my truck won’t turn on unless I spray started fluid. What can it be? It wasn’t doing that before the PM now every time I turn it off only way I turns on is if I spray starter fluid
Check your small fuel litter cap, sometime it gets damaged when installing it.
@@angelacosta4567 thanks
buenas ..saludos ..me pueden apoyar con el torque de los tornillos del volante de clucht de un cascadia125 motor DD15 por favor, standar de 18 velocidades.
Is it harder to replace the clutch on a automatic than a 13 speed??
13 speed involves more work
Definitely does not what are you smokin
Mi camión está teniendo el mismo problema me gustaría saber que es el causante de eso se pone. En cambio pero no se mueve
No torque wrench on the flywheel bolts? Damn son..
How much for the work
$1600
Narrow space and dirty mud for the clutch replacement. Please ask the company owner build a tunnel. A truck lift elevator is the best.
This is the real deal man, no lifts or tunnel. Just a will to get it done.
@@oscaribarra9740 The employer responsible for improve the safety working equipment
Sometime you have to use what you have to get the job done.
He is the employer.
Is there anyone else that does videos like this besides Francisco amaya??
you need a camera man that can hold it still
U need a camera man
Hi, this is Rock Rooster Footwear. We sent you a collaboration invitation email. Please check if it’s in the spam. Thanks!