What gloves are you using to remove your hot suppressor? Been looking for one that won’t melt when touching a hot suppressor. Great videos by the way. Always look forward to your new videos!
Good video. Like the multi angles. As far as the malfunction... I assume it still has the original shipping grease on it? And which barrel is it? Shooting my regular OZ9 with threaded barrel, after about 150 rounds it will fail to go into battery as well... (before I cleaned it). A large part of this is the very tight barrel to slide lockup and a new gun. These guns are meant for competitions with very tight lockup. About 500 to 1k rounds in on that gun, zero issues with both full sized kraken (never cleaned) or without. Go clean the gun and oil it properly and it will run like a champ. I did my first video on it already and now doing an upcoming video on both the Regular 17 sized OZ9 and the 34 sized Competition model. I do wish the 34 sized was avail with threaded barrel. =)
If you're going to review a Zev rifle, I would really like to see a review of the Zev small frame 6.5 Creedmoor. High quality AR-15s are pretty common, and regular large frame AR-10s aren't uncommon either, but the makers of small frame AR-10s are rather few, and the makers of premium ones even fewer.
Hi I have a Zev OZ9 which is very similar to Glock, can you educate me which Glock's race/competition holster will compatible for my new ZEV OZ9C? Thanks very much
I’m still confused as to why they didn’t just use one trigger group using the 19 length rail if they are going to integrate it in to the trigger housing then just use longer distances covers on the 17 and 34 length slides....
I believe these are the same spec slides they sell as aftermarket for Glocks, so i would assume, yes. However i don't know why you would want to go backwards and put a Glock slide on this.
I feel sorry for what is happening to those poor people. Homemade single shot slamfire shotguns are easy to make & it's possible to create your own powder propellant. If they can get access to a primer source, some primitive but effect defensive weapons can be made. Wishing the best to all those involved.
@@Dragon-yw4xw they have to have a heat exchanger for the motor & tires are usually vulnerable to puncture. Meaning at some point they have to get out. Smoke bombs work well if you have access to lifeboat equipment, they have smoke signals that 1 can limit view to less than 2 meters on the strests & they last about 8-10 mins
@@Dragon-yw4xw also, metal twist wire similar to barbed wire will wrap around the tires & sieze their drive train. You need to organize a delegation to speak in England & North America to plead for assistance.
@ Yu Cao. Do yourself a favour and get on edsmanifesto on IG. He's the man when it comes to defending yourself in non permissive environments. Be safe, stay free 🙏
This Gun is literally at the top of my want list!!! Thanks for the video brother! Keep em coming!
Note: you can't swap 19/17 receivers to grip housings. 19 to 19 or 17 to 17. You can swap 19/17 lowers and uppers.
where can i find more info on that, i want to build one
What gloves are you using to remove your hot suppressor? Been looking for one that won’t melt when touching a hot suppressor. Great videos by the way. Always look forward to your new videos!
Good video. Like the multi angles. As far as the malfunction... I assume it still has the original shipping grease on it? And which barrel is it? Shooting my regular OZ9 with threaded barrel, after about 150 rounds it will fail to go into battery as well... (before I cleaned it). A large part of this is the very tight barrel to slide lockup and a new gun. These guns are meant for competitions with very tight lockup. About 500 to 1k rounds in on that gun, zero issues with both full sized kraken (never cleaned) or without. Go clean the gun and oil it properly and it will run like a champ. I did my first video on it already and now doing an upcoming video on both the Regular 17 sized OZ9 and the 34 sized Competition model. I do wish the 34 sized was avail with threaded barrel. =)
If you're going to review a Zev rifle, I would really like to see a review of the Zev small frame 6.5 Creedmoor. High quality AR-15s are pretty common, and regular large frame AR-10s aren't uncommon either, but the makers of small frame AR-10s are rather few, and the makers of premium ones even fewer.
Jinshun Wang Jesus Christ we’re watching a damn pistol video and here you are
Was that the new iPhone & gimbal recording over your shoulder? Looks good, I like the color saturation on it, whatever it was.
DJI Osmo Mobile 3 and iPhone 11pro. Good eye.
Hi
I have a Zev OZ9 which is very similar to Glock, can you educate me which Glock's race/competition holster will compatible for my new ZEV OZ9C?
Thanks very much
I have alien gear. G17 G19 is compatible with OZ9, lock in secure.
@@casinoeye702 what holsters from alien gear did you try?
I’m still confused as to why they didn’t just use one trigger group using the 19 length rail if they are going to integrate it in to the trigger housing then just use longer distances covers on the 17 and 34 length slides....
Yes. Like the Sig 320.
The steel front section adds weight for recoil management and rigidizes the unit for supporting rail components.
The case is nicer than the gun! Haha
lol got some balls leaving the truck down there with yall's snatching shots at 100yds lol
200 Yards, don't short change my stupidity LOL!
I thought the truck was the target at first. Lol
Thanks for the review. Is there any compatibility with the Glock slides? Could you run a Gen 5 Glock 19 slide on that receiver / grip combo? Thanks
I believe these are the same spec slides they sell as aftermarket for Glocks, so i would assume, yes. However i don't know why you would want to go backwards and put a Glock slide on this.
I have an great idea!!! How about reviewing more cans like the olden days!!!!
TONS of suppressor reviews in the works…like 8+
NFA Review Channel you son of a bitch, me collecting hot toys and tax stamps are getting expensive
Love how close your truck seems to the target from that distance after seeing that I subbed instantly🇺🇸🇺🇸🇺🇸🔫
What RMR would you run on the OZ9c?
JP Hospitality rm06
I would not make my Zev a nightstand gun. Light primer strikes is normal for them.
Cant you just get a stronger striker spring?
@@kdworak4754 That worked for me.
@@madzebra5491 ive had zero issues. These boys are crazy.
@@kdworak4754 they are just poor lol
没枪等于没有自由，枪是捍卫言论自由的最后防线。protect your 2nd Amendment! Look at what's happening in Hong Kong.
I feel sorry for what is happening to those poor people. Homemade single shot slamfire shotguns are easy to make & it's possible to create your own powder propellant. If they can get access to a primer source, some primitive but effect defensive weapons can be made. Wishing the best to all those involved.
321JKilla PLA have armoured vehicles. You need missile to defend your self. Guns are not enough.
@@Dragon-yw4xw they have to have a heat exchanger for the motor & tires are usually vulnerable to puncture. Meaning at some point they have to get out. Smoke bombs work well if you have access to lifeboat equipment, they have smoke signals that 1 can limit view to less than 2 meters on the strests & they last about 8-10 mins
@@Dragon-yw4xw also, metal twist wire similar to barbed wire will wrap around the tires & sieze their drive train. You need to organize a delegation to speak in England & North America to plead for assistance.
@ Yu Cao. Do yourself a favour and get on edsmanifesto on IG. He's the man when it comes to defending yourself in non permissive environments. Be safe, stay free 🙏
Your friend just killed like 10 people shooting over the berm.
why are you assuming that it "shouldn't run well on that ammo" ?? that was all factory ammo...... my glock 19 eats all that shit up
Oh does it. Cool
Good and interesting video but you use the word throw unstead of put so many times it reminds me of people that say like 15 times a sentence.
Issa glock issa expensive glock😑
This gun is a piece of shit, and $1600. You can buy 3 reliable factory glocks for that price.
damn, if it wasn't so tacky looking.
Primero