3:48 PLEASE PLEASE sticky this comment. This is a SUPER helpful video. HOWEVER, after I reassembled and everything was seated correctly the pump had started to leak!! Took me taking it apart a few times to finally figure out the issue. I had dried the gasket and housing off completely to make sure all debris was clear which it was. Then I remembered I had some waterproof gasket grease from a shower mixing valve repair. I coated the gasket with a thin layer of waterproof gasket grease (Danco Waterproof Grease 80360) and putting it back together just felt way better. Tried it out and NO MORE LEAK! I have a feeling the dry rubber against the plastic was not allowing it to seat correctly in the housing and this fixed that. So for anyone having this issue, go pick up this grease, it’s only a couple dollars and saved me from just buying a new pump or gasket! Thanks again for the video it was indeed helpful!
Just went through this last night and thankfully I was smart enough (usually not) to leave the dishwasher out before a test run. Sure enough there’s a leak now. Gonna grab some of this grease tonight and try again. Thanks for the tip.
wow. I came here to say that you saved me more than time & money today. I installed a BRAND NEW dishwasher and everything went well with the installation, but no sprayers worked when I tested it. I came across this video, did everything you said. The pump looked clear but I think it hadn't been seated properly. Rinsed it out, put back together & works like a charm. So thankful for you today - Cheers!
You son of a gun, fixed our issue, how dare your channel be informative and straight to the point. Don't you dare keep making educational videos (cuz my wife's gonna expect me to keep fixing sh!t). Thanks sir.
From the description of the problem to the steps to fix it, this video nails every single bit of this problem. Thank you! The pump was completely plugged with crap. Appreciate the troubleshooting trick!
Just wanted to say thank you! I followed these instructions and was able to save hundreds by not having to call a tech. Thank you, thank you! I also want to say I read and followed the comments about lubricating the O-ring on the pump before installation. I used coconut oil.
This video just saved my family $700 or more. That pump was completely plugged, and you didn’t miss a single step along the way of getting it out or getting it clean! Thank you so much for your video!!!
Another happy viewer here. After watching this and based on other research, I knew pump was the problem. I called a technician because this fix seemed daunting. But the technician said I need to replace the pump and quoted $350 for it. I refused, he still charged $80 for the visit. That was enough to nudge me to fix it myself. 😅 Followed the video, I needed to order plier to disconnect water supply hose. But I have my dishwasher up and running in 18 bucks! Thanks a ton.
My Whirlpool dishwasher stopped working 3 days ago, and having 2 kids, we are tired of hand-wash cups, glasses, dishes, trays the whole day, definitely the dishwasher and roomba are our best allies in our effort to maintain our home clean and organized. Well, we were looking for a good memorial day offer in Home Depot and Bestbuy, and when we were ready to buy a new one, this video appears and saves us $650. Thanks a lot!!!
Thank you so much for this! It’s fixed my issue right away. I wouldn’t have know where to start but your detailed video made it easy, plus it was the exact same model as mine which made it even easier! You’re the best!
Thanks for the video! I had a lot of gunk in mine, mostly wife hair! Just a note for anyone else watching, there is a retention clip on the electrical plug that is easy to get off with a screwdriver and a plastic retention piece on the motor that gets depressed by your thumb as you turn it. Was not shown here and really messed me up for a few minutes until I figured them out.
I was about to buy a new dish washer and thank god i watched your video before i place the order, i did exactly what you did and i didnt find anything blocking but it was minor dirt and i washed it well and put it back together and test it out and wow it worked . You are the man thank you so much
Wanted to give a shout-out this 100% fixed my issue. Strange though it wasn’t the same intense debris you had and it still malfunctioned. All the same worked out great! Thank you!
OMG! It worked! Thank you so much for posting this fix. I didn't find anything substantial in the pump- a small seed or pebble (or something) but I cleaned everything and reassembled and it's working like a champ! THANK YOU!
Thank you so much for the video. We were able to follow the instructions to remove the pump which had gunk that blocked the pump to not work properly. We cleaned it all out, did a test 1 hour wash, and heard the water spraying. Dishes are now cleaned. You saved us $600.
This took me only 15 minutes to do and worked perfectly. Saved me buying a new machine. Thank you very much. This has become my all time favourite youtube video ❤
Thanks for this man, it really helped us out! Ours had some debri, but nothing like yours. Cleaning it out seems to have done the trick and everything is working again! Clean and concise videos like this are a big help to people.
This video was super useful! Thank you so much, super easy to do. The tip on oiling the O ring also helped but we needed to replace it because it was worn out and would seat properly.
Thanks so much for this! I was thinking I needed a new pump or even a new dishwasher. All it took was a half hour and I was back up and running!! Fantastic!
Many thanks for this video! Helped me figure out what I needed to do to repair our dishwasher myself. While it wasn’t as simple as finding junk in there like yours, your step by step walkthrough helped me understand what I was looking at and ultimately what the problem was… the plunger (not sure what else to call it) at the end of the magnetic rod had detached and was rattling around in there which led to pump failure. Got a replacement pump installed and it’s singing along beautifully once more. Thanks!
100% my issue. Followed along step by step and while I did not have the amount of debis you had, this fix resolved it. Now cancelling my service call! Thanks for saving me big $
At least on my dishwasher, there was a tab you've gotta push "in" (towards the tube) just a little, and then another one on the back side (the stuff that's hard to see because its close to the washer) that looked like it had to be pulled "out". Gently though, just a little nudge on the tabs and then I could twist the part off
This is my exact dishwasher and exact problem. I’m excited to have found such an easy to follow video. Hopefully I have the same success as your repair
Was so close to taking a sledge hammer to our dishwasher. Followed your video and what do you know found a huge hair ball clogging the exact spot you said. Cleaned it real well and it’s back up and running. My family and I appreciate you and your willingness to share your video. Thank you again 🙌🏾💪🏾
Me, too! I was beyond frustrated with the dumb dishwasher and so ready to swing the sledgehammer, but this process in this video absolutely did the trick. The dishwasher works like a charm now and we’re SO grateful to you for sharing your expertise and such clear instructions!
This got my dishwasher working again - thank you so much! My symptoms were no spraying and the latch wasn’t locking the washer tight. Water IN and Water OUT were working just fine though and I cleaned out every other potential clog point before I found this video. Thanks, again!
Just a fyi if you can't pull the dishwasher out from under the counter, I had to raise the leveling feet all the way up (they just turn left or right to raise or lower the unit) so the dishwasher was sitting on the ground and then picked up a little to get it over the flooring, then it slid right out and this worked!! Thank you!!!
Amazing troubleshooting skills! Impressed by how methodically you tackled the dishwasher issue, taking it apart and fixing the pump. Your expertise shines through!
It’s always nice when you get lucky enough to find the root cause of an appliance problem without having to go spend the money on a brand new one. Thanks for the nice words. Appreciate it.
This worked perfectly! Mine had what looked like a hairball stuck inside. Pulled it out and put it back together. Works perfectly now. Thank you for putting this video together. Clean dishes!😊
I have the same model and had the same issue, I did what you showed and cleaned out that part (mine just had gunk in it but nothing in the impeller part). Once I put it back on and hooked it back up it worked perfectly! Thanks so much!
I had the exact same problem as in this video! I followed your steps and it helped me fix the issue. Thanks so much for making this video and helping me out!
Thank you for posting this video. I could not find in the Whirl Pool manual or any other literature your fix for the blocked pump. Every other source wanted one to replace parts to solve this issue. Your video shows more than a fix but a glaring engineering flaw in how the filters work (or do not work). Thanks again! ....another reason to Make America Great Again... Companies that care about the products they sell... Whirl Pool fix your filter problem.
Thank you for making this. Mine had no visible blockage but the “fix” still worked. I wonder if it has to do with the magnetic drive? I had a dog fountain with a magnetic drive pump. Once in a while it just got “stuck” and failed unless I took out the magnet to “reset” it. Either way this works. Thanks again.
Sir! I want to thank you sooo much for this video! I was able to fix the exact issue with mine. Thanks to you, I just earned 1000+ brownie points from the wife 😊 ❤
Thanks so much for the thorough walkthrough! This fixed our issue as well. We didn’t reinstall the pump as flush as it needed to be at first, so we got a leak. So make sure there are no gaps. We’re good to go!
My pump worked but the sprayer did not. So I followed your video. Found the impeller area clean and just a little gunk underneath. Cleaned it out anyways but did not have high hopes. Surprise, surprise... the sprayer works again!!! Thanks
Great video! It was super informative on how to get the pump out. Unfortunately for me there was no clogs in the dishwasher but on inspection the magnet of the motor was split in half which is why the pump isn’t functioning. Now the fun part of finding the parts but at least I was able to figure out what happened.
This worked for me. I didn't really find any debris except a little bit of scale. Cleaned it up, put it back together and it works like new again. Thanks for your video!
My 2017 Whirlpool dishwasher had the same problem..the circulation pump on mine has a fine screen below the 4 screw impellar housing that barely looked block but I cleaned it with a tooth brush and dish soap the impellar unscrews from the center magnet shaft..works great now..however my pump was very difficult to remove..it rotates off the same direction as this video but has a rubber sound damper post behind so you are required to try tilting it out forward to clear the mount..it was very hard to twist the pump off as it take almost a full quarter turn..great video here..saved me $$$ thanks!
Thank you for this. I have this exact whirlpool and that was a previous issue we dealt with. I keep this video so I always remember. Found a piece of mr noodles seasoning pack in it this time. 😅
Has the exact same problem with mine! Wish I had found this video over a year ago when the problem started. Just hand washed dishes for a year for no reason…although it did teach my kids a little work:)
I found your procedure very valuable. However, I shortened it considerably by not disconnecting any of the three washer connections. I was still able to get to the pump by tilting the washer about 70 degrees. My 0-ring has an internal diam 1mm greater than its seat. Is this normal or should I get another that is more snug? Another viewer says she cannot find a replacement.
With 33,000 views on this video that tells me not to buy whirlpool appliances anymore. My whirlpool refrigerator, and washer have already went out. Now I'm here working on the dishwasher. Hey thanks for making this video though.
Yeah I hear ya. I’ve had the same luck. That being said I havn’t had any notably better results with most of the other models either. I’m happy if I can get 5 years out of any standard appliance these days. Best of luck to you and thanks for chiming in here. Take care.
3:48 PLEASE PLEASE sticky this comment.
This is a SUPER helpful video. HOWEVER, after I reassembled and everything was seated correctly the pump had started to leak!! Took me taking it apart a few times to finally figure out the issue.
I had dried the gasket and housing off completely to make sure all debris was clear which it was.
Then I remembered I had some waterproof gasket grease from a shower mixing valve repair.
I coated the gasket with a thin layer of waterproof gasket grease (Danco Waterproof Grease 80360) and putting it back together just felt way better. Tried it out and NO MORE LEAK!
I have a feeling the dry rubber against the plastic was not allowing it to seat correctly in the housing and this fixed that.
So for anyone having this issue, go pick up this grease, it’s only a couple dollars and saved me from just buying a new pump or gasket!
Thanks again for the video it was indeed helpful!
Glad this helped and thanks for adding the tip to your comment as well. 👍
Great great comment here. Thanks for the tips for the audience=)
Was thinking the same thing. Lubricate the oring shown and the rubber gasket inside the brass connection where the water line was unplugged.
Just went through this last night and thankfully I was smart enough (usually not) to leave the dishwasher out before a test run. Sure enough there’s a leak now.
Gonna grab some of this grease tonight and try again. Thanks for the tip.
Why didn't I listennnnnn, off to ace tomorrow lol
wow. I came here to say that you saved me more than time & money today. I installed a BRAND NEW dishwasher and everything went well with the installation, but no sprayers worked when I tested it. I came across this video, did everything you said. The pump looked clear but I think it hadn't been seated properly. Rinsed it out, put back together & works like a charm. So thankful for you today - Cheers!
You son of a gun, fixed our issue, how dare your channel be informative and straight to the point. Don't you dare keep making educational videos (cuz my wife's gonna expect me to keep fixing sh!t). Thanks sir.
From the description of the problem to the steps to fix it, this video nails every single bit of this problem. Thank you! The pump was completely plugged with crap. Appreciate the troubleshooting trick!
Just wanted to say thank you! I followed these instructions and was able to save hundreds by not having to call a tech. Thank you, thank you!
I also want to say I read and followed the comments about lubricating the O-ring on the pump before installation. I used coconut oil.
This video just saved my family $700 or more. That pump was completely plugged, and you didn’t miss a single step along the way of getting it out or getting it clean! Thank you so much for your video!!!
Another happy viewer here. After watching this and based on other research, I knew pump was the problem. I called a technician because this fix seemed daunting. But the technician said I need to replace the pump and quoted $350 for it. I refused, he still charged $80 for the visit. That was enough to nudge me to fix it myself. 😅 Followed the video, I needed to order plier to disconnect water supply hose. But I have my dishwasher up and running in 18 bucks! Thanks a ton.
Be glad you only got charged $80. Minimum house call here is $99.😅
My Whirlpool dishwasher stopped working 3 days ago, and having 2 kids, we are tired of hand-wash cups, glasses, dishes, trays the whole day, definitely the dishwasher and roomba are our best allies in our effort to maintain our home clean and organized. Well, we were looking for a good memorial day offer in Home Depot and Bestbuy, and when we were ready to buy a new one, this video appears and saves us $650. Thanks a lot!!!
Thanks for the great report! Very glad this helped you out:)
Great vid. Thanks for this. My pump had a plastic tab off the bottom of a Yeti mug that had come off in it. The tab said. "DO NOT REMOVE." 😂😂😂
😄Glad this helped.
This video was life saver, almost replaced the intake pump but then decided to check the sprayer pump. Sure enough, it was clogged. Thanks a bunch!
Thank you so much for this! It’s fixed my issue right away. I wouldn’t have know where to start but your detailed video made it easy, plus it was the exact same model as mine which made it even easier! You’re the best!
Thanks for the kind words! I’m so happy this helped you.
Your video helped my husband fix our dishwasher in 15 minutes! You saved us hundreds of dollars! Thank you!
Awesome!!! Great to hear that. Glad this helped you guys.
Saved me a whole lot of headache. Thanks.
Great to hear it. Thanks for letting me know.
Worked perfectly, when I opened mine up it was almost exactly like yours. Thank you so much.
I'm another happy customer. Well done, sir! I haven't seen this solution mentioned on any of the other 15 videos or websites I checked out
This was my issue! Easy to do! Thank you very much!
Great to hear that!! It’s nice when you can fix them yourself.
Wow! Not all heroes wear capes, truly. Thank you for the fix!
You are welcome and thanks for the nice compliment. Take care.
Thanks for the video! I had a lot of gunk in mine, mostly wife hair!
Just a note for anyone else watching, there is a retention clip on the electrical plug that is easy to get off with a screwdriver and a plastic retention piece on the motor that gets depressed by your thumb as you turn it. Was not shown here and really messed me up for a few minutes until I figured them out.
I was about to buy a new dish washer and thank god i watched your video before i place the order, i did exactly what you did and i didnt find anything blocking but it was minor dirt and i washed it well and put it back together and test it out and wow it worked . You are the man thank you so much
Glad I could help! Thanks for letting me know too=)
Was there a hot plastic smell?
Wanted to give a shout-out this 100% fixed my issue. Strange though it wasn’t the same intense debris you had and it still malfunctioned. All the same worked out great! Thank you!
Glad this helped:)
OMG! It worked! Thank you so much for posting this fix. I didn't find anything substantial in the pump- a small seed or pebble (or something) but I cleaned everything and reassembled and it's working like a champ! THANK YOU!
You are very welcome. I’m very happy to hear this fixed your problem. Thanks for letting me know:)
Thank you so much for the video. We were able to follow the instructions to remove the pump which had gunk that blocked the pump to not work properly. We cleaned it all out, did a test 1 hour wash, and heard the water spraying. Dishes are now cleaned. You saved us $600.
That makes me very happy to hear! Glad it worked out:)
Our dishwasher had the exact same problem, and after following your video it's back in business. Thank you for sharing!
That’s awesome to hear. Thanks for letting me know!
This took me only 15 minutes to do and worked perfectly. Saved me buying a new machine. Thank you very much. This has become my all time favourite youtube video ❤
Great to hear!
Found some scale in there from the well water. Cleaned it up good as new. Thanks for the awesome video
Nice work! Glad this helped.
Thanks for this man, it really helped us out! Ours had some debri, but nothing like yours. Cleaning it out seems to have done the trick and everything is working again! Clean and concise videos like this are a big help to people.
Thanks a bunch for the nice words. Really appreciate it and glad this helped you.
This video was super useful! Thank you so much, super easy to do. The tip on oiling the O ring also helped but we needed to replace it because it was worn out and would seat properly.
Thanks so much for this! I was thinking I needed a new pump or even a new dishwasher. All it took was a half hour and I was back up and running!! Fantastic!
Great to hear that!! Dishwashers are expensive so it’s nice when you can fix them yourself, DIy style. Take care!!
This video definitely saved me money. Worked instantly. Can't get enough of DIY 💪🏾
Right on! Thank you
Many thanks for this video! Helped me figure out what I needed to do to repair our dishwasher myself. While it wasn’t as simple as finding junk in there like yours, your step by step walkthrough helped me understand what I was looking at and ultimately what the problem was… the plunger (not sure what else to call it) at the end of the magnetic rod had detached and was rattling around in there which led to pump failure. Got a replacement pump installed and it’s singing along beautifully once more. Thanks!
I love your quote, "That's the sound of success."
Thanks!
Absolute legend! Mine didn’t have anything blocking but removing and cleaning did the trick!
:) thanks for the nice comment. Glad it helped. Thanks for letting me know.
I just fixed our D/W exact same issue and it saved me a service call. thanks so much, you're great!!
Oh sweet! Great to hear that. Yeah pretty simple once you get it pulled out and flipped around. Thanks for the nice comment.
Thank you for this video. Fixed the problem in under 20 minutes you sir are a lifesaver
Glad it helped. You are very welcome. Appreciate the feedback.
5mins and it worked! Crazy how some small debris will jack up the inner workings. Thanks again for the tip
Heck yea. Glad it helped.
100% my issue. Followed along step by step and while I did not have the amount of debis you had, this fix resolved it. Now cancelling my service call! Thanks for saving me big $
I love it when this happens. Thanks for letting me know!
At the 2:34 mark im having the hardest time trying to get this piece off. Any suggestions.
Maybe a rag and some channel locks. I havn’t had to try that but I think it would be my second option to try and see if that works.
Same
At least on my dishwasher, there was a tab you've gotta push "in" (towards the tube) just a little, and then another one on the back side (the stuff that's hard to see because its close to the washer) that looked like it had to be pulled "out".
Gently though, just a little nudge on the tabs and then I could twist the part off
@@soniclettuce i wish i would have seen this comment earlier haha this was exactly the case
THANK YOU!!!!!!
Problem solved! My hairball was bigger than yours! What a relief!
Right on!!!! Wow you must have some blockage:) thanks for letting me know.
This is my exact dishwasher and exact problem. I’m excited to have found such an easy to follow video. Hopefully I have the same success as your repair
So happy this helped. Thanks for letting me know. Take care and good luck!
Was so close to taking a sledge hammer to our dishwasher. Followed your video and what do you know found a huge hair ball clogging the exact spot you said. Cleaned it real well and it’s back up and running. My family and I appreciate you and your willingness to share your video. Thank you again 🙌🏾💪🏾
I know how frustrating it can be:) So glad this helped you guys out. Thanks for letting me know. Take care.
Me, too! I was beyond frustrated with the dumb dishwasher and so ready to swing the sledgehammer, but this process in this video absolutely did the trick. The dishwasher works like a charm now and we’re SO grateful to you for sharing your expertise and such clear instructions!
@@rachelsauer9768 I'm very happy to hear that. Thanks for letting me know. Take care!
we’re going to try to fix it step by step with your awesome video tomorrow! Thanks!! Fingers crossed!
Thank you!
This got my dishwasher working again - thank you so much! My symptoms were no spraying and the latch wasn’t locking the washer tight. Water IN and Water OUT were working just fine though and I cleaned out every other potential clog point before I found this video. Thanks, again!
Great to hear it. This seems to be a common problem with these dishwashers
@@DIYTechniciangood to know in case I buy a new one/need to clean it, again.
🙌🙌🙌 watched this video and fixed my dishwasher in 5 minutes!
Thank you!
Fantastic!
Thank you for the video. It saved me a couple hundred dollars. Watch for the washer. It is tricky.
Glad it helped!
Just a fyi if you can't pull the dishwasher out from under the counter, I had to raise the leveling feet all the way up (they just turn left or right to raise or lower the unit) so the dishwasher was sitting on the ground and then picked up a little to get it over the flooring, then it slid right out and this worked!! Thank you!!!
Awesome tip, thanks for sharing!
Life saver man. You're doing the lords work haha
Thanks!
Great video, took no time and fixed my dishwasher!
Glad to hear this helped! This seems to be a common problem with dishwashers. Thanks for letting me know and for watching my videos!
Amazing troubleshooting skills! Impressed by how methodically you tackled the dishwasher issue, taking it apart and fixing the pump. Your expertise shines through!
It’s always nice when you get lucky enough to find the root cause of an appliance problem without having to go spend the money on a brand new one. Thanks for the nice words. Appreciate it.
This worked perfectly! Mine had what looked like a hairball stuck inside. Pulled it out and put it back together. Works perfectly now. Thank you for putting this video together. Clean dishes!😊
That’s fantastic!!! Thanks for sharing the positive results. Take care.
This fixed my problem!!! Thank you so much!!!
You're welcome!
I have the same model and had the same issue, I did what you showed and cleaned out that part (mine just had gunk in it but nothing in the impeller part). Once I put it back on and hooked it back up it worked perfectly! Thanks so much!
Thanks for sharing
I had the exact same problem as in this video! I followed your steps and it helped me fix the issue. Thanks so much for making this video and helping me out!
No problem. Dishwashers are expensive so it’s always nice when we can figure out how to DIY. Thanks for letting me know. Take care!
I did this the pump wasn’t too dirty surprisingly but it seems to have fixed the issue just cleaning it , thank you!
That’s great news! Thanks for letting me know.
Thank you for posting this video. I could not find in the Whirl Pool manual or any other literature your fix for the blocked pump. Every other source wanted one to replace parts to solve this issue. Your video shows more than a fix but a glaring engineering flaw in how the filters work (or do not work). Thanks again! ....another reason to Make America Great Again... Companies that care about the products they sell... Whirl Pool fix your filter problem.
Absolute Life Saver! Thank You So Much
I’m happy this video served you well. Gotta keep the dish washer running! Thanks for commenting. Take care.
Nice job, very efficient narration. Thanks.
Thanks a bunch!
Thank you for making this. Mine had no visible blockage but the “fix” still worked. I wonder if it has to do with the magnetic drive? I had a dog fountain with a magnetic drive pump. Once in a while it just got “stuck” and failed unless I took out the magnet to “reset” it.
Either way this works. Thanks again.
Hahaha that’s great to hear. I’m surprised at that to tell you the truth. hey whatever gets it back working:)
Same here second time I've had to do it. Wonder if I should replace the part. It's getting quite tedious
That’s a great point and it sounds like that’s entirely possible.
Thanks for the video. We fixed this issue in our dishwasher
Glad it helped. Thanks for letting me know:)
Thanks so much. I was trouble shooting everything and sure enough, same piece of plastic in the impeller. Ten minute fix thanks to you.
That is wonderful. I’m so happy to hear that! Thanks for letting me know. Take care.
Thank,thanks & again. My dishwasher had the identical problem, thanks to your video, I fixed mine the same as yours. I love "UA-cam University".
Glad it helped!thanks for the feedback.
This video encouraged me to work on my dishwasher. I had debris on mine also. I Got it going again. Thank you so much for this video.
Great to hear it. Nice work! Thanks for letting me know:) Take care.
Great tutorial! Fixed my dishwasher within 30 minutes😊
Thanks! Glad to hear this helped. Appreciate the feedback.
This was a great video! To the point and educational!
Thank you!
SO HELPFUL!!! Thank you so much for saving our family over $700!! I was able to do it all on my own and was successful!
That is awesome news. Thanks for letting me know.
This was it! Thank you boss, these dish washers are much lighter than i thought, too, lol. Anyways, again thank you!
You're welcome! Thanks for letting me know. Glad it helped.
Sir! I want to thank you sooo much for this video! I was able to fix the exact issue with mine. Thanks to you, I just earned 1000+ brownie points from the wife 😊 ❤
You're welcome! Glad to support that marital bliss:) I got a few credits for fixing mine too. thanks for letting me know. Take care.
This worked! Thank you!
Glad it helped! You are very welcome:)
Thanks so much for the thorough walkthrough! This fixed our issue as well. We didn’t reinstall the pump as flush as it needed to be at first, so we got a leak. So make sure there are no gaps. We’re good to go!
Great to hear!
Thank you for solving my problem
You are very welcome. Happy this helped!
My pump worked but the sprayer did not. So I followed your video. Found the impeller area clean and just a little gunk underneath. Cleaned it out anyways but did not have high hopes.
Surprise, surprise... the sprayer works again!!!
Thanks
Hey alright!!!!
Great video! It was super informative on how to get the pump out. Unfortunately for me there was no clogs in the dishwasher but on inspection the magnet of the motor was split in half which is why the pump isn’t functioning. Now the fun part of finding the parts but at least I was able to figure out what happened.
Right on! Thanks for sharing
Thank you for your video! Saved me from having to wash dishes!!!
Heck yeah! Thanks for letting me know this helped:)
Gracias!!! 👏🙏🙏 this video saved me at least $250+ dollars and took 30mn to follow. We had an almost identical piece of plastic in the impeller
De nada! Glad this helped. Thanks for letting me know.
Watched this video, took it apart, there was no trash but decided to clean anyway. Plugged back in and tested, VOILA!!!! 🎉🎉🎉
Awesome video. Thank you so much for the save.
Glad to help!
Thank u so much,fixed mine
That is awesome!
This did the trick. I have Whirlpool wdt730pahz0 and top rack was not cleaning. Found the pump to be very clogged. Excellent video.
Thanks for sharing your experience! Glad it helped.
This worked for me. I didn't really find any debris except a little bit of scale. Cleaned it up, put it back together and it works like new again. Thanks for your video!
Heck yeah! I’m so happy to hear this worked for you. Thanks for letting me know. Take care.
The problem was exactly as you pointed out. Thank you for saving me an expensive service call.
Glad to hear it:) thanks for letting me know👍
This worked for me. It was easy and it saved me a service call $$$.
Thanks Mike! Appreciate you letting me know. Great to hear it.
Thank you so much! This saved us a ton!!
Glad it helped!
Worked, thank you!
Very happy to hear that. Thanks for letting me know.
Worked for me, thank you!
Great to hear that!
My 2017 Whirlpool dishwasher had the same problem..the circulation pump on mine has a fine screen below the 4 screw impellar housing that barely looked block but I cleaned it with a tooth brush and dish soap the impellar unscrews from the center magnet shaft..works great now..however my pump was very difficult to remove..it rotates off the same direction as this video but has a rubber sound damper post behind so you are required to try tilting it out forward to clear the mount..it was very hard to twist the pump off as it take almost a full quarter turn..great video here..saved me $$$ thanks!
Great comment. Thanks for sharing that as well. Glad this helped. Take care.
This fixed my problem! Thank you for posting this. Saved me $80.
Great to hear that! It’s nice when you can fix them yourself.
Great video, 👍 thank you
Thanks:)😊
TY !
Thank you so much for this video!! You saved the day!
Right on!!👍 thanks for letting me know.
Thank you for this. I have this exact whirlpool and that was a previous issue we dealt with. I keep this video so I always remember. Found a piece of mr noodles seasoning pack in it this time. 😅
Great to hear! Please do:) thanks for the feedback as well. Take care.
Has the exact same problem with mine! Wish I had found this video over a year ago when the problem started. Just hand washed dishes for a year for no reason…although it did teach my kids a little work:)
I guess that’s the silver lining:) thanks for sharing
You saved me. Thank you
No problem! Thanks for letting me know:)
helpful. Thanks.
Glad it was helpful!
Oh my goodness, thank you for your video. You saved me so much money. I had crud in mine, but it is running as I write this.
Awesome, so glad this helped!
I found your procedure very valuable. However, I shortened it considerably by not disconnecting any of the three washer connections. I was still able to get to the pump by tilting the washer about 70 degrees.
My 0-ring has an internal diam 1mm greater than its seat. Is this normal or should I get another that is more snug? Another viewer says she cannot find a replacement.
I was able to use the existing gasket. Thanks for the input:)
Thank you!!!
You're welcome!
THANK YOU! This was amazing!
You're so welcome!
With 33,000 views on this video that tells me not to buy whirlpool appliances anymore. My whirlpool refrigerator, and washer have already went out. Now I'm here working on the dishwasher. Hey thanks for making this video though.
Yeah I hear ya. I’ve had the same luck. That being said I havn’t had any notably better results with most of the other models either. I’m happy if I can get 5 years out of any standard appliance these days. Best of luck to you and thanks for chiming in here. Take care.
Easy fix thanks to you.
Glad to help:)
Thanks for the vid.
You are very welcome:)
You’re the man, thanks
Thank you. Take care!