Helpful video. I just have 2 questions. I saw on a nother site a guy that put the can rolled up inside the cylinder instead. Have u tried it and du u think it mathers? The other question is can u fit the fps rings after doing the heat shrink hose?
I tried the can in the cylinder originally and it cause issues with the cocking as the can slid out mid cocking and mid game so refuse to do it now, I've used the videod method for over a year with no issues now :) The FPS rings are tight to the spring guide so they wont fit over the heat shrink, if you get a pack of heat shrink like I have you get hundreds so you can easily cut one off the put the rings on and then reapply
What screws did you upgrade with. and when you say they stripped did the screw strip or the body of the gun threads. did you just take the screws to a harware store and find replacements or is there a set
I had a look on ebay or an online shop I can't remember which and someone was selling a pack of 4 stainless steel replacement screws for them. The hex head of the screws started to wear away on mine as I was removing and replacing all the time when I was setting the fps near to the limit as possible.
Great Video! 👌🏻😊 But what are you doing if you have to adjust your FPS rings? To you remove the old shrink and will you apply a new one as it changed on height causing by mixing with the FPS rings? Asking because I have a SSG96 with quick spring exchange and have to adjust the FPS very often.
you prolly dont give a damn but does any of you know a tool to log back into an Instagram account..? I was dumb lost the login password. I appreciate any tricks you can offer me!
@Marcus Tristan thanks for your reply. I got to the site thru google and I'm in the hacking process atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.
Possibly but would end up falling off sooner as there are many points of failure on tape, the glue wearing away, the spring pulling it off, moisture affecting it, etc. It may work but not as well.
Hi! Can you tell me if you have Can mod or Heat shrink since you test them ? Heat shrink doesn't Peel with the Spring ? Thanks for your help because the ssg10 A3 is very loud !!
Hello I've had success using both, I've stuck with heat shrink, I find if you heat the end that you put down the spring guide and then push it down the spring guide to the bottom it makes it curl up at the end so it sits under the spring when you put the spring over it and it holds it in place so it doesn't move and it keeps it shape really well
Nice video bud! What diameter is your spring guide now including the heat shrink? Also what heat shrink do you have? Finally what you use to shrink it? Wasn’t sure what to use as I don’t have a heat shrink gun
This mod will stop the rattle from the spring after shooting, it's one of a series of mods to make it when you shoot that there is a single "pop" when you shoot instead of a bang followed by a rattle. It also assists in the bolt pull slightly as it keeps the spring from moving around the spring guide which can cause it to sometimes cock back awkwardly causing damage to the piston as it comes back on an angle.
nice video man, quick simple and to the point, now my SSG10 is quieter with the can mod! Cheers dude!
Thanks for video 😊 but which sorbopad did you use?
How about vulcanized tape around the spring guide? As effective as the shrink sock?
Thank you for this very useful!
Helpful video. I just have 2 questions. I saw on a nother site a guy that put the can rolled up inside the cylinder instead. Have u tried it and du u think it mathers?
The other question is can u fit the fps rings after doing the heat shrink hose?
I tried the can in the cylinder originally and it cause issues with the cocking as the can slid out mid cocking and mid game so refuse to do it now, I've used the videod method for over a year with no issues now :)
The FPS rings are tight to the spring guide so they wont fit over the heat shrink, if you get a pack of heat shrink like I have you get hundreds so you can easily cut one off the put the rings on and then reapply
@@LeadFootUK Ok Ok I'll probably go for the shrink since I have both the hose and heat gun at work :) thanks again
@@mattiasolsson9807 Excellent enjoy :D
What screws did you upgrade with. and when you say they stripped did the screw strip or the body of the gun threads. did you just take the screws to a harware store and find replacements or is there a set
I had a look on ebay or an online shop I can't remember which and someone was selling a pack of 4 stainless steel replacement screws for them. The hex head of the screws started to wear away on mine as I was removing and replacing all the time when I was setting the fps near to the limit as possible.
why is the can reccomended over the wrap for the ssg?
Its personal preference
So it's just putting some sound deadening on the spring guide to stop the spring slapping against it making noise?
Yup it stops the slack the spring has which causes the loud vibrations
Great Video! 👌🏻😊 But what are you doing if you have to adjust your FPS rings? To you remove the old shrink and will you apply a new one as it changed on height causing by mixing with the FPS rings? Asking because I have a SSG96 with quick spring exchange and have to adjust the FPS very often.
I'd not bother shrinking until you have set the fps or I'd get another spring guide so I could keep one at the right fps level for that spring etc.
you prolly dont give a damn but does any of you know a tool to log back into an Instagram account..?
I was dumb lost the login password. I appreciate any tricks you can offer me!
@Milo Jayson Instablaster =)
@Marcus Tristan thanks for your reply. I got to the site thru google and I'm in the hacking process atm.
Seems to take a while so I will reply here later when my account password hopefully is recovered.
@Marcus Tristan It worked and I finally got access to my account again. I am so happy:D
Thank you so much, you saved my ass!
Basically you just need shrinktubing instead of the can ?
Yup you can do either :)
wound tape work as heat wrap ?
Possibly but would end up falling off sooner as there are many points of failure on tape, the glue wearing away, the spring pulling it off, moisture affecting it, etc. It may work but not as well.
@@LeadFootUK great to know thanks for the replay! will just wait for a friend to come by who got the same kit as you on amazon
Hi!
Can you tell me if you have Can mod or Heat shrink since you test them ?
Heat shrink doesn't Peel with the Spring ?
Thanks for your help because the ssg10 A3 is very loud !!
Hello I've had success using both, I've stuck with heat shrink, I find if you heat the end that you put down the spring guide and then push it down the spring guide to the bottom it makes it curl up at the end so it sits under the spring when you put the spring over it and it holds it in place so it doesn't move and it keeps it shape really well
@@LeadFootUK hi!
Thanks for your answer !!!
Because ssg10 A3 is more difficult to be quiet 😅
The heat shrink shouldnt cause any FPS change on the ssg10 right?
Minimal at best
@@LeadFootUK ok just making sure it wasn’t going to lower my fps to much, Thanks!
Jw wot hop up chamber do you have in ssg 10
I now have an action army hop with 60 degree bucking and a custom tdc fitted
Thz mate
So all of this just for a bit of less sound ??
Don't do it then ?
Nice video bud! What diameter is your spring guide now including the heat shrink? Also what heat shrink do you have? Finally what you use to shrink it? Wasn’t sure what to use as I don’t have a heat shrink gun
I have no way to check diameters sorry, the heat shrink pack i have was £4 off ebay and i used a lighter as per the video :)
I'm a little late to this :/ but if he has the stock Novritsch SSG10 spring guide it should be 13mm in diameter.
Hi im sorry but can you tell me what this mod do? 😇
This mod will stop the rattle from the spring after shooting, it's one of a series of mods to make it when you shoot that there is a single "pop" when you shoot instead of a bang followed by a rattle.
It also assists in the bolt pull slightly as it keeps the spring from moving around the spring guide which can cause it to sometimes cock back awkwardly causing damage to the piston as it comes back on an angle.
Okey awesome, Thanks😇
And why do you do this ?
Reduce the sound of spring
Do you think is that gonna work on L96?
Don't see why not to be fair they are all pretty much the same
how his help this mod?
Quietens down the spring noise which vibrates loud otherwise, like a twang noise
@@LeadFootUK oo.. thanks bro
does this make your replica quiter?
It makes the twang noise from your spring quieter so yes it does
@@LeadFootUK by doing that mod will you lose some fps ?
@@RODOSs770s shouldn't affect it at all as its just tightening the hold the spring has on the spring guide
What does this achieve?
Pretty sure the video explains it bud