I want to do the same thing with my regal. Gonna look into a 2" drop spindle I think. Want the abs hubs like that to wire into stand alone efi for traction control.
There’s a huge amount of confusion thank you for taking the time for explaining it and explaining it to morons like me I can go shopping freely and easily and not be having a cow about it. 2 Wheel Dr. and two-door confusion. No one else clear decide them up at all.
Yo my G I would like to say thanks for sharing the info the majority of these lames on UA-cam don't share the info! I just subscribed too your channel and Gud luck on ur future projects!
Had a chance to go to a Honey spot and found a 2k Blazer with all its front suspension complete. Dammit those Spindles were a PIA for me wouldn't come off for nothing. The Differential was EZ $.
Can you do a how to do video on those upper A-Arms fitting into those spindles mine are angled down like really tight was wondering should I take the shims out or leave a couple in it's like four of them
I have a question can I put a blazer spindle and rotor braking system into a buick wildcat 1969. Just wanting to know what would work best for me? Any suggestions?
Hey broo c10 gmc here can you tell me how to do my gmc 1985 swap front brakes from a camaro 99 the what i got available here in tucson az thanks for all you help
Hey I got 03 spindle and hubs off of a Chevy Blazer 2 wheel drive that one side on my Buick Regal got the same upper a arm that you have seems to be snugged really tight was wondering if you can help me what I'm doing wrong
Nice videos, quick question, if I do the second option of using all blazer parts, rotor, spindle, hub and caliper do I still need the Core 3 brackets? Can i use the blazer brake hoses? Also can I use my stock Monte Carlo ball joints?
Remove the cotter keys and loosen the 2 castle nuts from both the upper and lower ball-joint. Do not completely remove them however. Make sure tbey are on 5 or 6 threads. Then use a suspension pickle fork and wedge and hammer between the spindle and upper control arm first. Then use the pickle fork and and wedge under the bottom portion of the spindle and lower control arm. You will have to give it some solid hits with a sledge hammer. This will break the press fit from the upper and low e ball joints. Then finish removing the upper and lower castle nuts and the spindle will.come right out.
I’m asking if you do the 8.8 swap on the rear can I still the s10 disc brake swap on the rear even if it’s a ford 8.8? My fault big homie if I’m confusing you Ik this for the front but tryna figure something out for the rear on my swap.
MR_getinthere they sayn that’s for an Abody the 1/2. I looked on umi and they saying the 1inch is for a Gbody. I know you sumpn, am I looking wrong boss?
Yo what's up man I have a little problem I got my blazer spindles but it seems like it won't turn as much as it did with the stocks .the tie rods are a little too long for the Blazer one did you ever come across that problem?
jr Calderón never heard or seen that fam ..un hook the tie rod and make sure your wheel is steering lock to lock ..have you got an fresh alignmentsince the swap ?
MR_getinthere nope I ended up putting the stock spindle back in I will take the Blazer spindle back to the Pull-A-Part and compare them to the other ones I'll let you know what the problem was once I get it solved thanks👍
Hey bro 1st if all thanks for the videos n information, that shit priceless... but can this setup work for a B body I got a 69 impala vert n if it can’t do u know a setup that I could use, really could use ur help. Thanks n keep blessing up wit them good ass videos u the man bro
Do I need to change the ball joints to the blazer ball joints on the G body, when doing the conversion.
No stock gbody ball joint.. but the really the same though
MR_getinthere which spindle gives the car a little lift is it the S10 spindle?
@@chavisboi idk .i dont lift cars like that only with coilover shocks
I guess it is kinda randomly asking but do anyone know of a good website to watch newly released movies online?
@Emilio Lucca Flixportal :)
i prob run strait blazer set up thanks for info i know you put it out a while ago but just now getting to that point
Good info
Now can you do a video for the rear differential disc brakes....
elmeromero chitown gotcha fam 👍👍
I want to do the same thing with my regal. Gonna look into a 2" drop spindle I think. Want the abs hubs like that to wire into stand alone efi for traction control.
this is flat out excellent hot rodding!!!
I think only you and JMalcolm2004 be dropping that knowledge on how to probably build your old school
Can i use the zl1 brembo calipers and rotors off a 2015 camaro for me g body
There’s a huge amount of confusion thank you for taking the time for explaining it and explaining it to morons like me I can go shopping freely and easily and not be having a cow about it. 2 Wheel Dr. and two-door confusion. No one else clear decide them up at all.
Np , subscribe to the channel
Thanks. If you ever do a swap for the Silverado/c1500 chevy. Post it. I'm thinking of doing the rear Drums to Disc swap.
michaelrramos1387 ok fam
Easy find a new body style 99 -03 silverado and swap the whole rear and get 5 lug axles and drums
Good video. Is there any rotor that will let you use 14 in rims
Can you drop video on rear big brake swap on g body options
Louis Tezeno yea I drop one
Sorry but I didn’t understand .would you mind tell what that yellow bracket?
Yo my G I would like to say thanks for sharing the info the majority of these lames on UA-cam don't share the info! I just subscribed too your channel and Gud luck on ur future projects!
Bitswiz101 A thanks fam stay locked in more to come
My guy be putting that good shit out here for y’all knuckle heads!! Appreciate fam!!
Chasemanuti lol thanks bro
Love the commentary but the splindles.....lol spindle
Great info...I'm most defiantly gonna use it
yo spray boy u been mia u need to do another video bro
SprayWayCustoms big brake alday big bro
I love your paint work sprayway😊
14 inch rotors look so dope! I might stick with the 12s for now but definitely thinking about upgrading in the future
I took these off the S10 but I cant stop did you have to get a bigger master cylinder or break booster?
Danny Austin stock will work fine .but I wilwood master will be better
Always enjoy your videos, you are the truth Big Dog. Good looking out on the info.
Patrick MaCord no problem fam 💯
Say fam I sent you a email regarding a sway bar ? And a ? About rear disc set up on my El Co. Take a look at it when you get a chance. Thanks
Patrick MaCord ok fam.i check it out now
Had a chance to go to a Honey spot and found a 2k Blazer with all its front suspension complete. Dammit those Spindles were a PIA for me wouldn't come off for nothing. The Differential was EZ $.
Great video. Great information. 👍🏾👍🏾
Thanks
Do u make the brackets to do a brake upgrade for box chevy and using 6 piston brembo front and 4 piston rear
Yess , email me getinthere.customs@gmail.com
Can you do a how to do video on those upper A-Arms fitting into those spindles mine are angled down like really tight was wondering should I take the shims out or leave a couple in it's like four of them
great video's keep it up, thanks for sharing and doing this for everyone....
Ray Hancock anytime fam
Good vid. U know if these will clear 17s or do u need 18" wheels?
@mrgetinthere I'm tryna do the Camaro setup which would be the 12in rotors what conversion bracket do I use
What would I use if I have a ford 9 inch on a 86 monte carlo ss.I want to switch from drums to disc.Thanks a lot.
Very good info man! What's a good junkyard swap for front disk brakes on a '67 Buick Special with drum spindles? Thanks!
I have a question can I put a blazer spindle and rotor braking system into a buick wildcat 1969. Just wanting to know what would work best for me? Any suggestions?
No wont work ..i have kits for that car email me @getinthere.boys@gmail.com
Lol I watch this so many times! Thanks tho. Good info. I need them 14” vette brakes on my national 👍🏽
No problem fam hit .when u need the hybird adapter bracket i have them for 125
Don't know if I can use 2000 2w blazer rear disc brakes convert on drum brakes for my 1968 impala
damn ok, cuz i was lost on the brake upgrade lol
Nation GoldHeart now u know wat u need get to work lol
YOU HAVE VIDEOS OF DONK REAR DISC
when are you going to make a video on the B body up grade.like the 96 impala ?
good video big homie, can you do one on the caprice box
terry guest yea I'm working on that probably gone be a pic vid tho
Hey bruh do you know if this conversion will work with B bodies(impala ss)?
Doing it on the MC and waiting on your box chevy big brake video
Hey broo c10 gmc here can you tell me how to do my gmc 1985 swap front brakes from a camaro 99 the what i got available here in tucson az thanks for all you help
Hey I got 03 spindle and hubs off of a Chevy Blazer 2 wheel drive that one side on my Buick Regal got the same upper a arm that you have seems to be snugged really tight was wondering if you can help me what I'm doing wrong
kevo s u post to flip one over ..use to rights
taking notes bro i done got motor dropped in mine so doing research and then im back at it
I need to do this! Nice upgrade!!
Robert Hanna yess u do bro
Wat about box chevy rear disc brakes can u do a video on that
C5:c6 caliper brackets, would it also be c5:c6 calipers ?
On the first option 14” rotors
Good lookin out! Appreciate the info tryna hook up my Grand National!!!!
No problem let me know if you need anything
Gotcha! Didn't know they didn't make em!
Can I roll 22 inch rims with the blazer set up. Or any of the other big brake setups?
Louis Robinson yess u can
Bro did your calipers brake hose hit the frame when you turn the wheel
No
@@Mr_getinthere did you use the stock hose or after market hose
Need the info on A-body Chevelle big brake set up.
Do4Self Now it's the same as the vid I posted the other days
Well this set up work with wilwood rotors and calipers on my 84 cutty also?
If u have wilwood vette caliper and stock vette caliper it will ,i dont thing the wilwood rotor would fit on the blazer hub
the 4wd wheel mess up the off set wheel wont mount rite
johnnie whoa 👍👍 thanks fam
Nice videos, quick question, if I do the second option of using all blazer parts, rotor, spindle, hub and caliper do I still need the Core 3 brackets? Can i use the blazer brake hoses? Also can I use my stock Monte Carlo ball joints?
Hutch Automotive INDY no you don't need the kore3 bracket using a blazer set up everything come off the blazer yes on the hoses yes to the ball joints
MR_getinthere appreciate you brother! Good looking 💯
Hutch Automotive INDY anytime fam 💪💪
WOULD THE 84 BUICK LESABRE BE THE SAME OR IS IT LIKE THE CAPRICE
Yo this is informative .Im finally gonna put my blazer front setup on .
What where the studs part numbers ?
Black Macgyver bro let me get back to you later on with that arp part #
Can you do the same on a 96 impala/caprice/ Fleetwood?
Gonna do my brakes thanks bro
Now is 2wd s10/blazer going to be the same or it NEEDS to be a blazer?
It's the same long ass it's the 3 bolt hub , some Jimmy trucks had this same spindles aswell
If I run the all blazer set up will stock 14" rally wheels work? Or 15s only?
I've heard 14 will work but never did it ,I always go 15"
Great info. You still doing videos on gbody
Yesss subcribe and check the channel out
What's the name of the other bracket other than the hybrid one. I'm using the blazer setup with the camaro brakes and rotors.
Kevin Williams Camaro rotors WONT WORK .
Kevin Williams and it's call standard bracket I sale them email me getinthere.boy@gmail.com
@@Mr_getinthere I went with the blazer setup. I have the ls brake system also( not installed) what's the difference in stopping power
Kevin Williams C5 rotors bigger and ls1 cAilpers alot lighter
Very informative. One thing though. MRGETINTHERE. You could go one step better by getting the drilled and slotted rotors!💪💪
youngestson65 I haven't seen 14 " in drill and slotted 🤔
youngestson65 this come from the factory gm 14" rotors
Can you guys help me out. I found a blazer at the yard and can brake the ball joints off the spindles. Any pointers?
Remove the cotter keys and loosen the 2 castle nuts from both the upper and lower ball-joint. Do not completely remove them however. Make sure tbey are on 5 or 6 threads. Then use a suspension pickle fork and wedge and hammer between the spindle and upper control arm first. Then use the pickle fork and and wedge under the bottom portion of the spindle and lower control arm. You will have to give it some solid hits with a sledge hammer. This will break the press fit from the upper and low e ball joints. Then finish removing the upper and lower castle nuts and the spindle will.come right out.
rapidride2 ya it was easy after took a sledge hammer to it
How would this work.with 13 inch spokes?
Won't fit u need 16" or better the clear 12.8 rotor
Good video one Question will the big brake kit c5 c6 from kore.com work on blazer Spindle without having to change anything
does it have to be C5/c6 caliper bracket or will the 99 camaro bracket work also?
Camaro bracket will not work
@@Mr_getinthere ok, but c5/c6 bracket will work with the camaro caliper right?
Trying to do my box Chevy
Good shit right here. Now I gotta take all my shit apart😁
MEMPHIS MIKE don't be on my channel stunting 😬😁
Ok now to find Brazer splinders 🤣🤣🤣
Do you use c6 or c5 Calipers. Or either.
Either one
What's the difference in doing it for the box chevy?
I posted a vid on that a few days ago
I havent seen it yet
boxboy50 check it out
Sounds good brotha
But you can still do it with the s10 blazer spindles, correct?
Can you shoot me some tips for an ABody brake set up
WonkaVision shoot me a email I got parts for them too getinthere.boys@gmail.com
Do the blazer spindles work on the stock control arms on gbody 88 monte ?
Yess
Good info you got a video for b body’s?
Yess i judt posted one abt month or so ago
What do I use for the brake proportional on back disc swap?
Disc to disc valve
Will the blazer spindle set up work with a 8.8 with gbody bolt pattern?
This a front set up it have nothing to do with rear .wat are you asking ??
I’m asking if you do the 8.8 swap on the rear can I still the s10 disc brake swap on the rear even if it’s a ford 8.8? My fault big homie if I’m confusing you Ik this for the front but tryna figure something out for the rear on my swap.
@@blackboyc7856 ok i got you now u would have cut off the ford axle flange and weld on a gm flange moser sale them they like 75 bucks each
MR_getinthere damn man thanks. you a gbody prophet keep up the work homie 💯
@@blackboyc7856 thanks fam
Need the info for the box chevy
Me. Get in there, what up homie.. what upper ball joint is best with that speed way upper a arm? 💯🔥
Brandon Murray qa1 1/2 longer o u can get 1" longer ..check umi out
Brandon Murray umiperformance.com/catalog/index.php?main_page=product_info&cPath=13_262&products_id=676
MR_getinthere they sayn that’s for an Abody the 1/2. I looked on umi and they saying the 1inch is for a Gbody. I know you sumpn, am I looking wrong boss?
I see them boss thanks man. 1.5 for the win.
Brandon Murray 1.5 to tall 🙄
Getinthere help me out what you think
Yo what's up man I have a little problem I got my blazer spindles but it seems like it won't turn as much as it did with the stocks .the tie rods are a little too long for the Blazer one did you ever come across that problem?
jr Calderón never heard or seen that fam ..un hook the tie rod and make sure your wheel is steering lock to lock ..have you got an fresh alignmentsince the swap ?
MR_getinthere nope I ended up putting the stock spindle back in I will take the Blazer spindle back to the Pull-A-Part and compare them to the other ones I'll let you know what the problem was once I get it solved thanks👍
jr Calderón yea let me know
thanks bro you save me a lot of money
No problem make sure u hit the subcribe button
Great info. What was the total cost of the setup?
VenomGT87 can't say blazer spindles go from 100 -300 depends where you at
Strong work sir
great info CJ
CountrySideClub anytime BRO
Man.....thank you🙌🏾
Let me know if you need brakes
Do i order kit for camaro or blazer?
Hey pimp love the videos, but was wondering will the camaro rear disc brakes work on a 12 bolt rear end. Wanna put disc brakes on my 87 c10
Kawinkidink II thanks bro ..yess they will work on a 12 bolt
Already. I done learned a lot watching you. I appreciate the videos. And tell twin solid to get off your head and get that monte done.
Camaro= 5X4.75, truck= 5X5"
This a work on my 87 monte carlo ss?
James Jon yess all gbodys
Will this work for 74 caprice
kush master no I sale kits for that donk email me getinthere.boys@gmail.com
What about 99 blazer
Yess 2wd only
@@Mr_getinthere my bad bro its a 90 ...1990
@@jahfiyah619 98-02 ONLY 2WD
@@Mr_getinthere good lookn
@@Mr_getinthere .....bro is there any other springs i can get out the junk yard that will fit a gbody. Will blazer springs fit.
I need a LSA motor
I can sale u a lsa kit for 4600
I need a big brake upgrade kit...what's your email so I can contact you?gotta get this 87 cut dog together
Timothy Richardson getinthere.boys@gmail.com
Hey bro 1st if all thanks for the videos n information, that shit priceless... but can this setup work for a B body I got a 69 impala vert n if it can’t do u know a setup that I could use, really could use ur help. Thanks n keep blessing up wit them good ass videos u the man bro
This wont work .let me check to see wat spindle u got and get back with you
Thanks bro I would really appreciate it
love video
Sorry hit the wrong button
Mr get in there I shouted you out Check It Out😎
💪🏼💪🏼💪🏼💪🏼💪🏼
Man how you do that bla bla bla just playn player
when are you going to make a video on the B body up grade.like the 96 impala ?
Butch Arrigale soon more stuff involved ..and I don't have a B-body for the demonstration. I can send you the link what you need