Customizing Costume Containers - Part 1 of 4
Вставка
- Опубліковано 10 лип 2024
- I customize my containers for each Star Wars costume I build, so that they look more like something from that universe. This tutorial teaches a lot of tips and tricks I have discovered over the years, as well as some pitfalls to avoid, and some simple fixes for when paint issues arise. People have asked for a tutorial on these, and I put this together over a few months. It was an hour and 45 minutes long, so I broke it up into four parts. This video is part 1.
Part 1: Introduction, example cases, choosing your case.
Part 2: Paint preparation, laying out greeblies and decals, and how to more permanently mount them. Video link: • Customizing Costume Co...
Part 3: Priming, painting, troubleshooting, and weathering. Video link: • Customizing Costume Co...
Part 4: Adding electronics, simple switch installed in a battery night light, basic circuits. Video link: • Customizing Costume Co...
About me: I am an enthusiastic ameteur prop builder, focused on Star Wars props. I am a member of both the Rebel Legion and 501s Legion costuming clubs in the San Francisco Bay Area in California. I post a lot of my builds and other costume content on my Instagram with the same username. / oddviking
For some of these videos, I was getting over a cold, so there is come congestion sound to my voice (apologies!).
Links:
Common Husky 50 gallon rolling tool box: www.homedepot.com/p/Husky-37-...
Jettisonable greeblies on Etsy: www.etsy.com/shop/Jettisonable
WampasWorkshop greeblies on Etsy: www.etsy.com/shop/WampasWorkshop
Pieman Graphics custom Aurebesh vinyl decals on Etsy: www.etsy.com/listing/68862060...
basic LED resistor calculator: www.hebeiltd.com.cn/?p=zz.led.... - Навчання та стиль
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
If you aren’t trooping as Tech yet then you really should. 😄 Amazing work! 💪
I just had a nerdgasm!Love this so much!
thank you!
Thank you for these videos. They inspired me to make a case for my trooper armor and now I'm off to make that helmet case as well. :)
excellent!
Chunky and utilitarian looking was my nickname in college 🤣 (brushing up on these videos as I plan how to move my costumes to England)
Haha! Sounds like a plan!
Amazing I am so glad the algorithm brought me. These cases are amazing. I don’t have any costumes but using this training for my room build cases.
I'm so glad to see you doing these videos. I personally like the one chipping to yellow in some spots but I can understand not being happy with it.
These are great. Can’t wait to watch the rest. Subscribed.
Cannot wait to continue watching these! I hope they blow up and you get a zillion views man. As I said on Instagram, your cases are by far my favorite Star Wars fan made props. I hope to get to that point some day. Great job!!
Thank you so much!
oh man! thank you so much for sharing these! i had seen pics of your work and was amazed! being able to see closer and some of the thoughts that went into them! Thank you!
I do REALLY hope you do a few more break down videos..maybe going into your brakets and fasteners.
Thank you so much!
Inspirational.
I just discovered your videos. Your work is amazing
Thanks! I only make them when I have something to show (that I get questions about). My Instagram with the same username has more regular (still-image) build WIP posts.
Thanks for these videos 👍🏽👍🏽👍🏽👍🏽
I am glad you like them!
@@OddViking oh by the way you gained another subscriber thanks for these videos again
Love it ... this was a great video!
Thank you so much!
Great work ! Your very talented !
Thank you so much!
These cases look so freaking cool. I will definitely try to match my crate to my Boba Fett costume. I think it deserves it. Will be watching this with very big interest. No electronics for me though, I guess. Hopefully, I can come up with something which still looks good. Maybe a little silhoutte of Slave 1 onto that crate?
No electronics? What about a simple small slot window with the red symbols like on his chest?
@@OddViking That is there, of course. Plus the usual stuff in the helmet. Could not have passed without that. No, I mean for my crate. I cannot stow a lot of electronics on the weathered Boba Fett post-Sarlacc. No pouches, just a tiny space for a flat cheat pocket under the leg flaps.
Thanks for all the great info. I love your color schemes. Do you remember what green spray you used on the small Husky box? And the beige and orange on the water barrel?
Have you tried vinyl upholstery dye as a base coat? I love it. It comes in an aerosol spray can.
I have not. is it better than spray paint?
Have you tried vinyl dye for the odd colored plastic to dye it black first?
I have not, what a good idea!
@OddViking I'll definitely be trying your ideas. I just thought I'd putch that as I've used it on modified Nerf for years and haven't had color chip through yet.
What paints did you use for the Rodian head carrier?
I used Krylon Plastic paints. It is shown in that video
What type of container did you use (orange and white ) for the mask and hands? Your stuff is awesome
I show it briefly at the 24:25 mark, it is a 35 gallon water barrel, that was white with a red top. I cut out the door, and then cut down the height by about 7" to shorten it. Then the door was trimmed and went back on, and was taller than the opening for a nice overlap.
Thank you and may I ask where you bought the water barrel from?
@@MrBigcheese001 It was from a farm supply place, I found it while on a trip. The kind of place they have hundreds of water containers for livestock.
Great video! Another tip when making Star Wars is stay away from 45 degree angles. Too many bevels/chamfers make it look like it's trying to be sci-fi or toyish as opposed to looking like it's a real thing. This isn't Halo.
Good tip! Thanks!
Where did you get your Rodian mask or did you make it?
it is from a maker “Evan Para”
@@OddViking Thanks! That's so cool! By the way, I love your work and creativity. Super talented. You and Smugglers Room and other channels inspire me. Thank you, friend. 😊
Does Evan Para have a website or anything of the sort?
@@stormrodgers2613 looks like nothing listed currently, but here is his Etsy: www.etsy.com/shop/EvanParraFX
Bummer. Thank you.