DIY CONCEALMENT COFFEE TABLE! Rustic DIY Super Easy! STEP BY STEP BUILD
Вставка
- Опубліковано 29 вер 2024
- Thank you for watching!!
If you enjoyed the video please Like and Subscribe!
Follow me on Instagram :maxf_yt
I would love to hear any video recommendations!
Here is a link to the Coffee Table Hinges: amzn.to/3jw3mKK
Here is a material list of what you will need:
1) 8ft 2x4
1) 8ft 1x6
1) 6ft 1x6
1) 8ft 1x4
1) 6ft 1x4
1) 2ft x 4ft sheet of 23/32 BC Plywood
2) 8ft 1x5
3) 6ft 1x5
2) 8ft 1x3
50 pc #8 1.25 inch screws
25 pc #8 .75 inch screws
Wood Filler
Satin Espresso Spray Paint
Semi Gloss White Spray Paint
Wood Glue
Provincial Oil Based Wood Stain (Varathane)
Oil based pre-stain wood conditioner (Varathane)
Water based spray polyurethane (Varathane)
Hinges
3/16th metal rod
Magnet
Rags for staining
Please let me know if you notice anything I missed!
Music Credits:
Short Trip by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/roa-mus...
Music promoted by Audio Library • Short Trip - Roa (No C...
Disfigure - Blank [NCS Release]
NCS: Music Without Limitations
NCS Spotify: spoti.fi/NCS
Download / Stream: ncs.io/blank
You should add a small magnet on the inside to make it tip proof so the metal rod won't accidentally fall out and then use a stronger magnet to pull it out
Love the videos!
Thank you!
And you can never go wrong with some RFID locks. They always make everything cooler. Not quite as simple as your good metal rod trick, but a lot more cool factor. Lol
Definitely!! Haha the cool factor is definitely worth taking into consideration! Thanks for the good ideas!
Nice job. For the foam you can use floor mats that are sold at Harbor Freight. Maybe do a flag top with Betsy Ross stars for other option.
Thank you Robert! Those are both great ideas!
I'm making one now. I'm going to put under mount drawer hinges to have the table top slide open
Your hardware from Amazon what is it called so I can search for it
The reason your table top is wobbling is because the legs that pivot on your mechanisms have holes in them and these are there for stabilizers to run from side to side. This could be a problem for space inside but is the cure to make it open evenly. Nice table.
Las bisagras en dónde secompran
You’d have to run a divider down the middle and 2 extra hinges. It would make 2 separate cabenit spaces but would make it a lot more sturdy.
Very good point!
What are the brackets called
Quality
Hey man just subscribed but watched all your 05 Chevy videos before. Hoping for more because I got the exact same truck, good luck to you brother ,great vids
Thanks a lot man I appreciate it!!🙏🏼
Hello do you have a cut list anywhere ?
Awesome... good job , I love it... I would make an American flag for the top but that’s me ... thanks for sharing..! Have a great weekend and stay safe...
Thanks a lot Mike! That would look amazing!! Thank you and you do the same
Literally just talking to my buddy yesterday about building one of these, excellent timing, thanks Max!!!
Thats awesome Rich im happy to hear! No problem if you decide to build one i hope it goes well!!
I have a similar tabletop and in between the hinges is a steel rod that prevents the table from wobbling just an FYI which you probably already knew
Thanks for this video.
SUGGESTION/IDEA: Since you're using a large(ish) magnet for the key (opener), you could use a smaller (weaker) magnet inside behind the locking pin so that even if the table tilts or is moved around the locking pin will stay in.
Also, thanks for including a link to the hardware you used.
No problem! Thats a really good idea, thank you for sharing!!
0 po qq
Great work! One question I have though is accounting for wood movement that May coz the table top to split o we time. I’ve seen people using bread board ends with floating tenons to counteract that since you used fixed braces that might be a problem maybe? Or don’t you think that’ll be a factor?
Now you should make the same thing with a flag for the top. :D Great work as always Max. Thanks for taking the time to make these videos. Much appreciated sir!
Still watching the video, looks great so far. At the part where your covering up the nail holes, what about pocket holes on the inside. That way you don't have to worry about them. Ok, Back to watching and keep up the good work.
Finished watching, it looks great. I'm still finishing up my concealment flag but I really want to make a side farm house table.
Thats a really good idea! Thanks a lot man I appreciate it! A farmhouse side table would be awesome!
Great video! Do you plan on putting a red dot on your Glock pistol?
Thank you Thomas! I would definitely like to at some point, or at least get another pistol and put a dot on it, one of my buddies has one with a dot and I remember it being a lot easier to get back on target after each shot
Awesome love it thanks for sharing! 👍
great job! on a side note if you don't mind.....what brand lower (with the star on the magwell) is that on your AR pistol?
Thank you!! Its made by F1 firearms, got that gun about 8 months ago or so for $899 i think it was. I think now its about $1099 at the same store so the price has gone up a bit. But i really like it 👍🏼 it has a flag on the opposite side on the magwell too
@@MaxF01 Thank you....I have a F1 upper and lower AR as well...very good workmanship!
@@nsayegh3205 thats awesome! They make some awesome guns! Thank you again🙏🏼
Love the magnetic lock idea I am totally using your idea
Your presentation was very well done sir. Easy to understand and follow.
Nice garand thumb bruise
That’s bad ass😎🇺🇸🇺🇸💯
Thank you Joseph!! 🙏🏼🇺🇸😎
What size brad nails ?
Nice job how much
The stain still looks blotchy even though you used a prestain conditioner. Can you put more coats of the conditioner, or is it just something you have to live with
As far as i know that stuffs a one time use. I also noticed a few blotchy spots in the stain, it could have been spots i didnt sand as deep as the rest, im not too sure exactly though, im sure theres some explanation for it
Great job bro!
What kind of wood did you use for your top? It don't look like a pine or spruce
Its actually just common board from Home Depo which i think is usually spruce pine or fir
Nice job Max.
Thank you very much Tom!
Cool table!
Thank you!
COULD YOU USE A REFRIGERATOR MAGNET ON THE LOCKING PIN AND JUST LEAVE IT HANGING ON ❓ 🦅 💗 🤍 💙 🦅
No because someone would pull it off
I’m thinking I’m going to use drawer slides on mine could just notch out the back to give them a way to slide in and out .. looks like a nice table I’d keep improving the design with better joinery/ better lock and hardware that uneven opening and closing would drive me nuts. Good work man
Thats a great idea! Thanks a lot for the feedback man I really appreciate it! Good luck on your build👍🏼
As a hobby woodworker That has been doing this for awhile now I can’t help but see improvements that should have been implemented in this build. The legs were a major no go for me exposing that end grain and not hiding it really takes away from this build. But we all have to start some where and it looks good for what it is. Keep up the hard work and striving for improving your craft
So do you recommend cutting of the edges of the legs