I have a 2007 Ford Escape hybrid and I have replaced the tire pressure monitor that now allows me to see pressure in each tire, but I need to disable the monitor on the car but I can’t even with the forscan and the adapter from Amazon. Windows 10 keeps saying that the adapter is not matching. Is it because my ford is a hybrid?
I have a 2003 ford expedition, Can I check backup aid sensor codes? Also what features would I be able to switch on it. Im assuming not many since it's an older car with not many features.
I like the recent change to the intro to your videos and how you get to the subject matter quickly. Some youtubers take almost a minute with dazzling video effects and obnoxious tunes. Perhaps they know what their subscribers like to dance to. Hahahaha! Also please take time to explain some terminology to those unfamiliar to new viewers. Maybe provide links in your comments to where you learned how to do this and where to buy stuff. Maybe demonstrate, while connected to vehicle, how to save the vehicle settings as you warned us about. Keep up with the totally interesting and informative content that I look forward to.
Great feedback Greg. I am very appreciative of this. I intended this video as just an introduction of what Forscan is. The next videos I have on the playlist actually demonstrate this process. I learned most of what I know from the forums. Again thanks for the great feedback!
Yes Auto dad this is Robert greener I have a 2012 Ford truck we hooked it up the other day and had a bunch of errors on it and we're not able to clear them if you have any ideals on how to clear them so I would appreciate it
I have a 2012 Ford F150 4-wheel drive battery positive power running boards off of 2010 Platinum I got everything from the module up I've got everything hooked up hot wire ground wire motor wires everything except for the canbus wires and when I try to hook them up with the force can they live got I got a bunch of red xmarks what is causing that
I took my f-250 in for a recall and they dimmed my DRL. Do you know how I can get them bright again? I saw some changes in the BCM but they didn’t work when I tried them
hi recently installed from sync 2 to sync 3 works nicely but got to problems voice commands from satnav and no dial tone on hands free they work ok but no sound..
I have a ford tourneo 1.8 TDDi of 75hp year 2006, I have changed the vp44 pump for a scrapper, and it does not start, it turns the engine, but it does not start. I've been looking at forscan but I don't have much idea how to use it, is it possible to adapt the vp44 scrap pump to the ford tourneo with the forscan? I have an ELM327 ford adapter, and it works with the forscan, but I don't know what function to use in forscan to adapt the pump, if it is possible. Greetings, any advice is welcome.
Great Video!! I'd like to turn on my Day time running lamps and disable the easy exit seat features on my 2003+ Town Cars.... I'm assuming I could do this with Forscan???
hey bud, would you know if a foxwell generic obdII scanner with a usb connection will work as the bridge for forscan? i have a port to connect my usb cable from the device to the laptop as well as the lead to the car
I ordered the ELM327 from Amazon and it arrived today. I just went out and plugged it into my 2019 F-150. When I try running the software I keep getting this message: "No ELM found, Please check connection and try again". Everything is plugged together and I have started and restarted the process multiple times and different sequences and still get the same response. It starts out with "Checking Bluetooth" then "Checking WiFi" then "Checking COMM4 , 5, 6 and 8 " and then I get the error message. Am I doing something wrong or is this an indication I have a bad ELM327. ?
@@AutoDad do you suppose se a -40F from your ECT2? my ECT1 is working fine but the ECT2 has a -40f. I already replaced the sensor and check the voltage. (4.80).
@@Daniel_ATL Are you sure you replaced the correct sensor, you also need to test the wires and connectors and splices inside the harness if you feel there is a wiring problem
To be 100% honest, I have no idea. All you could do is try it and see if it would even connect. I know Ford shared parts, but I believe those parts have slowly been phased out since they sold to Tata in 2008. Sorry I cannot help any further. You could ask on the forum if anyone has tried it.
@@AutoDad Generic codes are generic codes, American law requires all generic codes be readable by all generic code readers, if this device will not show live data and freeze frame data, I would not buy it. Dealer codes are not required to be given for free and many problems need to give the Enhanced code to properly diagnose your vehicle.
SO I DONT KNOW IF YOU CAN HELP ME BUT I HAVE A 2016 FORD FUSION THAT HAD MY PROGRAMMED ON IT SO I BOUGHT A OBD2 READER THAT RUN FORSCAN. SO I REMOVED MY KEY BUT MY CAR STILL ONLY GOES 80MPH. I DONT KNOW THE CODE OR WHERE TO REMOVE THE LIMITOR.....CAN YOU HELP ME?
I have a 2007 Ford Escape hybrid and I have replaced the tire pressure monitor that now allows me to see pressure in each tire, but I need to disable the monitor on the car but I can’t even with the forscan and the adapter from Amazon. Windows 10 keeps saying that the adapter is not matching. Is it because my ford is a hybrid?
I have a 2003 ford expedition, Can I check backup aid sensor codes? Also what features would I be able to switch on it. Im assuming not many since it's an older car with not many features.
Not many features on that old of a vehicle. You should be able to read the codes though
@@AutoDad for sure thanks for the response 👍
I like the recent change to the intro to your videos and how you get to the subject matter quickly. Some youtubers take almost a minute with dazzling video effects and obnoxious tunes. Perhaps they know what their subscribers like to dance to. Hahahaha!
Also please take time to explain some terminology to those unfamiliar to new viewers. Maybe provide links in your comments to where you learned how to do this and where to buy stuff. Maybe demonstrate, while connected to vehicle, how to save the vehicle settings as you warned us about. Keep up with the totally interesting and informative content that I look forward to.
Great feedback Greg. I am very appreciative of this. I intended this video as just an introduction of what Forscan is. The next videos I have on the playlist actually demonstrate this process. I learned most of what I know from the forums. Again thanks for the great feedback!
I purchased that exact tool today.
Yes Auto dad this is Robert greener I have a 2012 Ford truck we hooked it up the other day and had a bunch of errors on it and we're not able to clear them if you have any ideals on how to clear them so I would appreciate it
How do you save your stock file?
I have a 2012 Ford F150 4-wheel drive battery positive power running boards off of 2010 Platinum I got everything from the module up I've got everything hooked up hot wire ground wire motor wires everything except for the canbus wires and when I try to hook them up with the force can they live got I got a bunch of red xmarks what is causing that
I have no experience with adapting the power running boards on non equipped vehicles, sorry
I took my f-250 in for a recall and they dimmed my DRL. Do you know how I can get them bright again? I saw some changes in the BCM but they didn’t work when I tried them
hi recently installed from sync 2 to sync 3 works nicely but got to problems voice commands from satnav and no dial tone on hands free they work ok but no sound..
Is there a way to have the doors unlock when put in park? and lock when taken out of park?
There may be depending on the application.
I have a ford tourneo 1.8 TDDi of 75hp year 2006, I have changed the vp44 pump for a scrapper, and it does not start, it turns the engine, but it does not start. I've been looking at forscan but I don't have much idea how to use it, is it possible to adapt the vp44 scrap pump to the ford tourneo with the forscan? I have an ELM327 ford adapter, and it works with the forscan, but I don't know what function to use in forscan to adapt the pump, if it is possible. Greetings, any advice is welcome.
Great Video!!
I'd like to turn on my Day time running lamps and disable the easy exit seat features on my 2003+ Town Cars.... I'm assuming I could do this with Forscan???
With a vehicle as old as 2003 I could not be sure. You should be able to, but could not confirm
hey bud, would you know if a foxwell generic obdII scanner with a usb connection will work as the bridge for forscan? i have a port to connect my usb cable from the device to the laptop as well as the lead to the car
I am not familiar with this one
Hello, is there something like this for land rover discovery...
Not to my knowledge no
@@AutoDad thanks
The best way to fix a Land Rover is to sell it.
-Previous Disco I & Disco II owner
Dose this read high presure fuel pump settings Ford Fiesta 2010 1.4tdci
I do not believe so. That will be under your tune
Can i find the car part numbers and repair manual from its software?.
No
@@AutoDad Where can i find it?.
I ordered the ELM327 from Amazon and it arrived today. I just went out
and plugged it into my 2019 F-150. When I try running the software I
keep getting this message: "No ELM found, Please check connection and
try again". Everything is plugged together and I have started and
restarted the process multiple times and different sequences and still
get the same response. It starts out with "Checking Bluetooth" then
"Checking WiFi" then "Checking COMM4 , 5, 6 and 8 " and then I get the
error message. Am I doing something wrong or is this an indication I
have a bad ELM327. ?
You need the drivers installed. I had to contact the seller on Amazon to get mine. After you install the drivers it will work.
Thanks. I posted a comment on the Amazon page. Guess I'll just have to wait and see if they reply.
What is the link for the USB driver
I don't have one. You need to contact the seller
Can Forscan be used to turn on a digital speedo on a 2015 Fusion?
Yes
Power balance, a.k.a. cylinder contribution....anybody know about it? Why can't I find it on FORScan?
What driver did you use for your ELM 327?
Not sure. The seller sent it to me
can you remove the P1299 code from a 2015 Fusion SE 1.5L ? I have this code and wont go away.
No, it will just come back. You have to fix the code
@@AutoDad do you suppose se a -40F from your ECT2? my ECT1 is working fine but the ECT2 has a -40f. I already replaced the sensor and check the voltage. (4.80).
@@Daniel_ATL Are you sure you replaced the correct sensor, you also need to test the wires and connectors and splices inside the harness if you feel there is a wiring problem
Does forscan reprogram and reflash ecu,s
No, just changes settings within the modules
@@AutoDad ok thank good to know
Do you have the link for the drivers which the seller sent you please?
I do not
Would you share the link for Windows 10?
I just went back into my Amazon account and found what the seller sent me for the windows 10 x64 drivers. www.wch.cn/downloads/file/65.html
@@AutoDad thank you so much!!! I had the same issue with the driver now works perfect!
Can it calibrate the torque sensor for 2008 Ford Escape?
That I don't know. I would search the forum
where can you get the list with the codes??
Forscan.org check out my other videos on Forscan. I show you how to use it and start it up
Forskin what is it?!
i had rergstered the forscan forum but it cant be login, could you help me to generate the FORScanLicense.key for me?
You have to be able to log in I believe. Try a different web browser
@@AutoDad no,i mean the user name might be got approval by the forum administrator.
@@danielngan I have not heard of that happening yet
Just buy the 1 year and log straight in that’s what I just did
Is there anything like this for a range rovers I have a 2013 range rover evoque It’s damn near a fucking Ford other than the awd system.
To be 100% honest, I have no idea. All you could do is try it and see if it would even connect. I know Ford shared parts, but I believe those parts have slowly been phased out since they sold to Tata in 2008. Sorry I cannot help any further. You could ask on the forum if anyone has tried it.
@@AutoDad Generic codes are generic codes, American law requires all generic codes be readable by all generic code readers, if this device will not show live data and freeze frame data, I would not buy it. Dealer codes are not required to be given for free and many problems need to give the Enhanced code to properly diagnose your vehicle.
Very informative video. How can I contact you for business inquiry?
Sorry no business here. UA-cam is my hobby
How remove ur speed limiter
That is tuning not settings
SO I DONT KNOW IF YOU CAN HELP ME BUT I HAVE A 2016 FORD FUSION THAT HAD MY PROGRAMMED ON IT SO I BOUGHT A OBD2 READER THAT RUN FORSCAN. SO I REMOVED MY KEY BUT MY CAR STILL ONLY GOES 80MPH. I DONT KNOW THE CODE OR WHERE TO REMOVE THE LIMITOR.....CAN YOU HELP ME?
Forscan is used to change values in your control modules not your ECU. You need a tuner for the ECU. 80mph may be the stock speed limiter
An American car with an 80MPH speed limit, come on....................