Best OBD 2 Code Scanner? Are All The Same? Let's Find Out!
Вставка
- Опубліковано 25 тра 2024
- Brands: Foxwell, Autophix, Autel, Ancel, Motopower, Launch Creader, LeeKooLuu. Code readers/scanners compared for overall capability, efficiency at retrieving codes, efficiency at progressing through menus, ability to locate and clear trouble codes, etc.
I purchased all of the trouble code scanners. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
AUTOPHIX: amzn.to/3WqIU26
MOTOPOWER: amzn.to/3WGDiRJ
Foxwell 301: amzn.to/4b453I3
Ancel 310: amzn.to/4a7hFge
Ancel 410: amzn.to/3JK3IKu
Foxwell 201: amzn.to/3QqHwc2
Autel: amzn.to/3whcNHt
LeeKooLuu: amzn.to/3QpKmxO
Launch Creader: amzn.to/3WltGeM
Videography Equipment:
Canon EOS R6 Mark II: amzn.to/4aErF18
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. - Навчання та стиль
Oh no. There's no greater anxiety than recently purchasing a tool and then Project Farm does a video on them...
Thanks for the feedback.
happened to me twice last year. both times I didn't have the 'best' but it affirmed my purchases!
I thought the exact same thing, Sarsattacks!
😂 good luck mate , see if you can return
If you aim for a mid priced tool you generally cant go wrong 😅
Yes on the BT scanners
Thank you!
@@ProjectFarm please, do the bluetooth.
I have one that is super old and it has really helped me over the years. It cost $6 on Amazon and I've used several apps over the years but carista was the best until it wasn't free anymore. Reviewing the BT scanners would be awesome but the apps that work with them would probably have to be a whole different video. I'm looking forward to it
especially ones with basic maintenance functions like ABS bleed and such
@ProjectFarm and the associated apps as perhaps a separate test. I've been using Torque on Android for a long while.
The fact that almost 90% of new cars and trucks have a screen and they can't display that data is a disgrace to the entire auto industry.
It's a disgrace to congress who pass laws that only benefit car dealers. GM used to have the ability to get codes on the instrument panel. That ended with OBDII.
They don’t like admitting to building garbage and they sure as hell aren’t going to tell you what’s wrong with it. They want you to bring it in.
Yeah, no kidding, I'm lucky that my Kenwood touchscreen stereo has a built in code reader that gives you the code number so you can look it up.
The dealerships would never allow that
They want there $150 just to scan the code!
You actually think the dealers want you to be able to fix things yourself.
I don’t need 80% of the stuff you review but I watch every vid
Thanks for watching!
One thing to keep in mind about all of these products is that they all work on what is known as Mode $06 (Mode 6) on the OBDII protocol. As such, they will only display OBDII mode 6 codes, which are generic codes that are not manufacturer specific. This is what is pulled during a vehicle emission inspection. The better ones will display most trans codes (actually they all should) as these are a part of the generic OBDII codes. There may be manufacturer specific codes which may not display in mode 6.
A full scan tool with manufacturer support will allow you not only to see the manufacturer specific codes, but also trouble codes in other modules throughout the car (radio, BCM, etc). There are these available on Amazon starting around $3-400. A good suggestion for a future video would be comparing features of these kinds of scan tools.
Very interesting. This is pretty much my first dive into the idea of doing this at all, this is all Greek to me lol
that would be an expensive video! But yes, that would be a good one and next level for sure.
A laptop and a $20 OBD2 USB or Bluetooth adapter is a good alternative depending on the make of the vehicle. If you have a Ford you are going to be hard pressed to get a scanner that can beet a laptop running FORScan.
@@Noneofyourbusiness2000 I need to know more about this! I don't have a Ford anymore, but this route, BT + laptop, seems like it might be best for me.
@@Noneofyourbusiness2000 Very true. I do have a Ford (2005 P71) and I also have Forscan on a Toughpad tablet with an OBDLink EX USB reader. For my job I also have an Apollo D8 (Snap On) scantool, as well as an Autel DS808.
Add me to the list of people wanting to see another video of more expensive scanners and blue tooth scanners as well. Great content as usual and been waiting for this particular video for a while now.
Thanks for the suggestion.
I already have a small collection of $50-90 scanners that never show me all the codes I need. I would absolutely love to see a video comparing multiple $200-399 bi-directional scanners, and maybe one $800 scanner for comparison.
If you do a second video, please include bluedriver. It works well for me, but I haven't tried many.
You deserve an award for reading and learning the instructions for all those devices. Nice work…..Tom
Wow I just got my first check engine light and you posted this 2 days ago! It feels like every time I'm in the market for something, you pop up to save the day.
Thanks for sharing!
This is one of the most beloved YT channels
Thank you!
@@ProjectFarm I named my son Project Farm.
Seriously, straight to the content, no BS like everyone else and its rare.
Just got off a 13 and a half hour shift. Nothing has brought me as much joy today than seeing that project farm posted a new video.
Thanks for sharing! That means a lot to me!
Maybe get a pet to welcome you home!
The clear and efficient way that you talk through how you're using the tool (and why) is so valuable. I purchased a code scanner a couple weeks before this video was released but I still got a lot of value out of the video. I had assumed that the freeze frame feature on my scanner was just some kind of screenshot feature in the scan tool, but as you went through the test it immediately became clear to me what the freeze frame feature actually is and how it could be useful to me.
I'm guessing that it's not an accident that your videos are such effective teaching material as well as purchasing information. It's an impressive feat of writing, performing, and editing to get as much teaching in as you do without making it feel like you're trying to teach anything. Thanks for the work that you're doing.
Thanks and you are welcome!
I've been wanting a video comparing OBD2 scanners, glad you're the one to make it, you're an absolute legend!
Thanks!
Finally someone tested cheap scanners side-by-side. One request: check if "time since codes were last erased" feature is available. It is a good "smell check" when buying a used car.
What scanner do you have that has this?
If you run an emission test they should let you know the codes were recently reset.
Torque Pro app has a readiness test you can run that indicates whether the vehicle recently had codes cleared.
@@riperoni9302 My Icarsoft do that.
The ancel 410 has that. I have that scanner. I found from Scotty Kilmer recommended tools site on Amazon
A few years ago, based on a Scotty Kilmer video, I bought a Blue Driver Bluetooth scanner. Cost about $100. I’ve used it for at least five years and it has never let me down. It not only pulls CEL codes, but Pending codes as well. Best $100 I’ve ever spent.
Thanks for sharing.
Does it have transmission info?
That click bait guy is so annoying!
Did a similar Scotty Kilmer video and bought a CGSULIT SC204 Enhanced OBD2 Scanner Diagnostic Tool. Worked fine and used it to eventually replace my smog pump on my 2013 Tacoma for $135 instead of the $1000 the dealer quoted.
I’ve had success with the Blue Driver for finding ABS and airbag codes on a few vehicles.
I would love to see a video comparing borescope inspection cameras. Klein, Milwaukee, vevor, depstech, Ames instruments, kobalt, Ridgid, triplet are some brand suggestions that seem popular.
Some test suggestions:
- cable flexibility, stiff and holds position or more flexible
- Image quality (how close do you need to be for clear image, how wide of an angle is the image, image quality in dark areas, etc.)
- battery life
- cable durability
- cable diameter and ability to enter different sized holes that it may commonly be used in (automotive/spark plugs, plumbing/drains, holes in drywall)
Thanks for the suggestions.
@@ProjectFarm Seconding this suggestion! I'm tempted to upgrade from my Ames, but only if it will be enough of an improvement.
I own the small 65$ish klein.... for what it cost, it's well worth the price. But if you're used to like a snap on, it leaves a little to be desired.... usb c to phone connection, lack of stand alone screen, app crashes often....etc.
As someone with 3 teenage daughters, a son, a wife, & myself, I spend A LOT of time with an OBD2 plugged in. This one is near & dear to my heart…& my wallet
Thanks!
I just bought a bi-directional scanner in the $400 range. There are several popular brands, and each brand has many models with slightly different features. It was challenging to isolate which brand/model offered the best value and the specific features that I wanted. I eventually gave up and picked one that seemed to be a good value for the features offered (Foxwell NT809TS for $350). I would have greatly appreciated a review of scanners in this price range, and I am sure your viewers will thank you if you decide to go forward. thanks
Thanks for the suggestion.
@@ProjectFarm For sure...I would love if you could do scanners that can put the newer vehicles into service mode to work on the rear brakes. Many of the mid range scanners have a monthly subscription which is a real negative. Thanks in advance!
Hi capsmith. How is that Foxwell NT809 working for ya? I had purchased the NT624, but returned it since it did not have a feature that I was looking for, along with its slow speed. For 350 I think that is a great price!
Do you have a link to share?
I just bought the Ottofix $500 the Foxwell was in my sights also. I wonder if it was worth the $100 more
best value right now is probably the $60 TOPDON TopScan. supports all cars.
As a 30+ year independent technician, this is a bee's knees video. It serves the "regular guy / gal" _perfectly_ . But also underscores how _quick_ they establish communication, and perform basic functions. I don't want to wait until the scan tool identifies the vehicle, searches for WiFi access, tries to connect to a server, 90% of the time. Just give me the info, now please. And that serves the DIY person better too.
Amazing shot down the middle, good sir, your content is among UA-cam's best, and you remain humble.
all of these are really junk compared to the $60 TOPDON TopScan
@@tomzphone No link to your review on your youtube channel?
Just going to hazard a guess... Do you have a Triton?
I bought the Foxwell NT301 using your link to Amazon. I appreciate your work. Thank you very much. I've bought other things as well. When shopping I see if you have covered the product. I choose things based on what I learn from you.
Thanks! Thanks for the feedback.
I purchased an Autel years ago and have used it a lot with very good results. I like it so well I have given each of my 5 kids one as a Christmas present, and 3 of my grandchildren who drive also got them. Well worth the money.
Autel user here also. Very pleased. So far.
Yea, the input lag on the 310 seems completely justified when I'm pretty sure I bought mine when Obama was still in office.
I keep that Autel in the Porsche to clear codes and it works great
I would definitely like to see the next price tier up from these. As a DIY guy I wouldn't mind spending a little bit more if it helps avoid a trip to a mechanic for diagnostics.
Thanks for all you do, I am always thankful for your scientific approach in testing these and your videos have guided my purchases several times, on everything from strong trimmer line to cordless vacuum cleaners!
Indeed. Those toys are far too basic and the testing criteria (how many buttons do I have to press?) is useless. Full module scans, including all in-cabin controllers plus ABS and SRS is the absolute *bare* minimum these days - really should include some things, like ABS bleed, for example.
look into innova all thier scanners are decent not professional but good enough for most people
IMO, get one of these for basics and "is it ready to be inspected"...and next, one that can handle manufacturer specific operations and codes for what you have. That might be a ~$300 device, or software than runs on a laptop, although what you need, and what you'll get, varies a lot by brand.
I have the BlueDriver OBD2 scanner Bluetooth to my phone.
Excellent tool I recommend.
The added bonus to be on your phone is well worth it.
Potentially.a bit legally questionable but I've found it's better to get a Chinese clone of the OEM diagnostic system... E.g. VIDA for Volvo cars, mercedes star, honda HDS, etc, this will give you all of the manufacturer specific info and allow many adjustments that the generic tools can't do. Unfortunately the software can be difficult to get working and it's basically piracy. I wouldn't use it in a commercial setting but for a DIY enthusiast it's a great option rather than a very expensive scan tool if you are not working on multiple brands of cars
I don't have to watch it all the way through to know it will deserve a "thumbs up"
Thank you very much!
@@ProjectFarmplease test OBD scanners with mobile app support. would be very halpful which one to choose
Thanks for the reminder lol
It's the first thing I do! I haven't seen a bad video yet.
@@MadmanLink
Yes I agree with you I click on the video & click the like button
Thanks. These are really handy tools. I like that your DOE included the number of button strikes to navigate the menus.
You are welcome! Thanks for the feedback.
One of those rare channels, that I watch at 1x speed😂 instead of x2 like others.
👍
So you're into chipmunk voices huh
Shoot, I’m paused right now and this comment pops up…lol
I sometimes watch it at .75x to absorb as much as possible in one sitting.
I have a VERY expensive Snap-On scanner for when I have to do complicated diagnostics. However it takes so long to boot up and connect that I also have one of these small scanners for when I just need to pull a quick code (Pretty sure it's a Foxwell). These cheap scanners definitely have their place, even in a shop. Thanks for testing them. BTW, this is the ONLY channel I support financially. That's how awesome this channel is.
Thanks and you are welcome!
You know they make bidirectional scanners for $80 and up now? Let you cycle valves,, check and monitor abs and srs and other modis type things. I couldn’t believe it when i got one for $137 and it was true bidirectional
@@stickboslightning My Triton has features even a normal bi directional scanner doesn't have. I can write VINs to new modules, do TPMS sensor relearns, reset oil life monitors, and it has a built in Scope and multimeter. It's worth the money in a shop where it used to make money. I'd never recommend one for home use.
Oh yeah i know man, im just saying how crazy it is that we can get bidirectional scanners for $100. That used to be $3k minimum they have built in scopes and everything. It really surprised me.
I spent years paying off the 2nd Gen Modus Ultra from snap on .. lol.. I feel ya pain
Best YT channels out there
My go to reference source for most of my purchases these days. So much better than looking at "customer reviews"
Thanks!
yes, the Chinese love him because he advertises their junk
@@voayer Wow some people have the ability to hate on everything no matter how good it is. Astonishing. You must be a real joy to be around.
@@zahvage1204 Well, some people would also like to see product tests made in "anywhere else than china" but they can't, because is mostly chinese junk here. Channel is in general good, tests are good...my only complaint about the channel is that doesn't include more products that are made outside of china.
Perfect timing, First issue with my Toyota with 200k + miles and need to get a scanner. Bought several things based on your testing and reviews. Keep it up!!!
Your dedication to honesty and thoroughness is truly commendable! I'd love to see your expert take on evaporative cooling towels in one of your next reviews like the Mission Original Cooling Towel or FROGG TOGGS Chilly Pad.
One of the most helpful and entertaining things about the internet is You Tube and one of the most useful, helpful channels on YT is the one this gentleman has created.
Thank you very much!
Yes, both higher-priced standalone units as well as Bluetooth ones!
Thanks for the suggestion.
Thank you for this video. ive been searching for a good, but affordable scanner for a while. an unbiased opinion is what i needed. i used your link and purchased the foxwell 301. Thank you for your product reviews, it really influences my purchases!
I needed one of these today and I lucked out that Project Farm helped me out. You are the best!
Thanks!
A $20 harbor freight scanner and an ounce of troubleshooting saved me hundreds of dollars. The impossible happened, the CEL came on on a TOYOTA. Some will say it never happens. But thanks to the code (intermittent misfire on cyl 2) and basic troubleshooting (moving the coil around) I was able to correctly identify a single bad ignition coil and replace it instead of throwing parts at the problem until the CEL went away.
I would probably replace them all and the plugs too with OEM parts. So many videos out there of bad coils and "new" aftermarket coils, spiraling into much worse trouble such as ruining the ECM driver transistors.
I have a misfire on my car right now. I changed my spark plugs just last year but reading this perhaps I should purchase some coils to get a head start on the problem.
My roommate had a 2004 Dodge Ram Hemi about 7 years ago, that had one bad coil. When the dealership replaced it, 3 more coils failed. When replaced, 3 more failed, including the original one that had been already replaced. Finally they just pulled them all and replaced al 8 at once. It cost a fortune!
@@trunks2505I was chasing a misfire on my car for a while and replaced the spark plugs. 2 shops couldn't fix it so I bought new coils. No misfire since. This was more than 20k miles before recommended replacement
My daughter has an 87 Camry. I went to Toyota to get bushing for the shifter ( they could actually get them) and the parts guy said they were going to recall the cars so people would have to buy a new one.
you should do a test on OEM coolant vs aftermarket. love your oil testing videos.
That'd be a great idea. id love to see like premix vs bmw oem, motorcraft, orileys generic and so on
2nd this, Subi fluids would be a good comparison because of Boxer sensitivity
3rd this - including Honda coolant vs aftermarket for the 2008 Civic
I'm up for this
Right subaru supercoolant is it special to use?
Todd just wanted to say thanks for the hard work you put on these videos! Very impressive 😅
You are welcome!
Thank you very much for this video! Excellent as always
Thanks and you are welcome!
I really like my Blue Driver. It wirelessly connects from the OBD port to your cellphone for display. It can be updated, and does a great job.
Second. Great unit.
The connection to the phone (and therefor internet) does make for some excellent advice. The whole "people with this vehicle and this code usually do this to fix the problem" thing is really great
I have this also and it’s quite comprehensive.
Blue Driver for me as well. Have had one for at least 5 years.
Autophix 3410 Bluetooth does the same for cheaper. Problem resolution are listed.
Yes! Please more of these! Would love to see the Bi-directional scan tools(mainly needed for bleeding ABS vehicles). I've been searching this myself and have found a few that do it, but would like to see ones with other bi-directional options! Excellent Video Project Farm! Hope you didn't get the storms today as bad as we did in central MO!
check out the $60 TOPDON TopScan
I Second this
Great job coming up with the categories for this assessment...always enjoy your work...thank you for your reviews .
Thanks and you are welcome!
Hey Todd, I truly want to thank you for doing what you do the video you posted with the best winch helped immensely I chose the zeak 13000 winch I went to my Enduro race this memorial day, and I used it to help two other people pull their cars up onto their trailers I was extremely happy with my purchase
Thanks for sharing!
Project Farm another amazing video! I don't know if you'll ever read this, but thank you! You've helped people from around the world, as I live in Poland and I still find your content relatable even thousands of (kilometers) miles away! Never stop, you're a rare gem in this world full of misleading information and literal scammers. Thank you!
You're welcome!
Totally agree, Project Farm is my first port of call now before I purchase most workshop tools or gear and anything I'm uncertain to as which brand is the best and more Farm Fam reliable. And I live on Mars...
Yes please do a follow up video on more expensive units as well as Bluetooth to phone app units. Thank you for all that you do Project Farm! We share your channel with fellow customers whenever we are in stores.
Thanks so much! Thanks for the suggestion.
I really enjoy the unbiased consumer reports and appreciate the time put into testing. I really appreciate the oil and additives testing videos and with the new Valvoline Restore and Protect oil, I hope to see testing on that on your channel soon
Thanks! Thanks for the suggestion.
I bought an Autel scanner several years ago and it has come in very handy. I recently sold a 2003 Yukon and it allowed me to find the cause of the CEL and get it fixed before the smog check and sale.
Thanks for sharing.
Really wish you would have included scanners in the $100-$300 range. You could cover things like ABS systems, etc. There are a lot of shade tree mechanics looking for something better than the cheap scanners without costing >$1000.
Thanks for the constructive feedback.
What's a shade tree mechanic?
@@duncan7766 I think he’s referring to a professional without a shop.
Inova makes some great ones. I use live data stream, to see the long and short term fuel trims.
@@duncan7766 normal people that still turn wrenches on their own vehicles. You know, in their yard under the shade tree.
Yes, both Bluetooth and higher tier scanner tests would be great! 😎✌️
Thanks for the suggestion.
I love how you thoroughly you review products. Keep it up! I would like to see a future review on more expensive OBD units. I don't mind spending money if I get a well built, accurate and possibly future proof device.
Thanks, will do! Thanks for the suggestion.
I have been using the FOXWELL NT301 for 7 years now. It is in all of cars. Got it back than for $35 each
Thanks for sharing.
I've owned the Foxwell NT301 for years, and, time aside (it's only a matter of seconds), for the price, it's bloody good unit for what it does, it's helped my troubleshoot some issues, so, I can't fault it really... 😏 😎🇬🇧
Doing this video must have seemed like a vacation... just sitting in a car and pushing buttons instead of having to apply torque to something or wait for glue to dry.
Thanks for taking the time to do these tests! It's greatly appreciated!
A well-deserved break!
My pleasure!
I have the foxwell nt624, about $250. Very slow to load, but does abs, bcm, shows what your tps sensor is reading as you push the gas pedal, what your o2 sensors are doing as it warms up, and a ton of other stuff. It also gets vehicle specific codes automatically. The more you pay, the more these things are capable of. Another good video idea is different price bracket readers, and their capabilities. Good job as always.
Thank you!
Xtool D8BT bluetooth wireless scanner has been amazing for me but Xtool D7 or wired version of Xtool D8 would be more than sufficient for most people. They both have bidirectional data, key programming, FD CANN, and individual module scans with topography. 2 or 3 years free updates.
They range from $300 with coupon to about $650 with coupon. They also do all the normal special functions like ABS bleeding, TPMS sensor, electronic parking brake, oil light reset, fuel injector mapping, and on some cars you can even change the chime pattern or turn off the annoying beeping when you haven't buckled your seatbelt 👀.
I can't remember them all but there's 38 special functions on the Xtool D8 and D8BT. The D7 has the majority of the same ones as well about half the price.
Yup, my Foxwell 510 with OEM support gives detail I didn't even know is stored.
This review seems to be more about speed to pull basic DTCs rather than how much detail or whether it helps identify underlying problems or running conditions that are out of spec or whether you can reset TPMS.
I'd like to see a review about which scantools are actually better, but that might be hard to do.
$60 TOPDON TopScan probably th best scanner right now, and supports all cars.
I agree otherwise, but it does not always equal 'pay more get more', many scanners are way overpriced. Complete features check is necessary to know you are getting what you pay for.
What I like in an OBD reader is the ability to manually test individual solenoids and such. Awesome video thank you
I have a Blue Driver OBDII reader and love it. It generates reports which is helpful to give my mechanic. It will also give you suggested fixes and links to parts.
Thanks for the feedback.
I've had the Ancel AD410 for 6 years and its always done what was needed. Fortunately, I haven't needed to use it too many times, but it has saved me money by helping me be more precise in diagnosing problems. If I was a pro mechanic, I would buy something more sophisticated, but for the $30 I paid for it back in 2018, it has been pretty impressive.
Thanks for sharing.
I've had the AD410 for a about 5 years now years. So far, worth every penny.
BlueDriver is one of the best and so small just plugs in and works on phone. My dad uses it along with his HP tuners to fine tune things
My scanner broke, so I got the blue driver and it's much easier to use since it utilizes my smartphone for all the interactions.
The BD also gives me some pretty good suggestions on the likely problem and how to fix the error codes. Very user friendly interface.
I have one plus a Topdon one too. The Topdon does way more and can operate the modules as well. But the Blue Driver is easier to use and has a better interface
Thank you for doing this video, I have been eagerly awaiting this one in particular. I t was very helpful and it helped make me pull the trigger on getting a newer OBD scanner, my current one is about 20 years old. I really like the autophix and you gave great information. Yes please do the more expensive ones too!
Yes! Please do a test on the ones that connect on your phones. Looking forward to it.
I have the Motopower.
2nd BlueDriver was my choice. I just leave it in the glove box. It has come in handy a few times.
I have an Autel AL329 that I have enjoyed for years! It is able to tell you monitor Readiness upon plug-in and it gives you the code information, upon code readout. I could not believe how it "walked circles" around the Matco brand one that I was using at the time. I picked it up at Walmart...
Thank you again, for such an informative video! 👍
Thank you for all your work on doing diligent tests!
You are welcome!
Absolutely would love to see a review on spendier readers, much gratitude for the work you do!
Thanks for the suggestion.
This is just the video I needed and wanted from you. I've been needing one for a while. You're the best channel Project Farm.
Glad I could help
Don't bother with any of these...at least get a 4 system one (Engine, Trans, Airbags, Brakes) but an all modules one with some service functions (like EPB) is FAR more useful.
@@SomeGuysGarage I'm just needing a cheap one for now. I'm cross comparing currently.
@@crazycoffee $99 Bluedriver for the win.
@@crazycoffee there are some decent cheap ones that do a bit more though, like an Autel AL519 or something, still in this budget but way more functionalitiy.
So glad Cousin Eddie was available for this episode.
Very timely for me like others now considering OBD-II scanners.
One of the few reviews you didn't need the Fisher Space Pen.
man i love all your videos. keep going!!
Cool video PF! Thanks for showing all of those to us and comparing them.
Thanks and you are welcome!
Can we get a yearly "garage setup" video? Testing new floor jacks, jack stands, drills, impacts, impact wrench's, torque wrench's, etc.? Basically the things most car guys would use so we can compare high end products to more budget options like from harbor freight?
I've watched a lot of your vids and a bunch from the Torque Test Channel to try and find the best bang-for-my-buck tools. I've settled on harbor freight for jacks and Milwaukee for the drill and drivers so far
Thanks for the suggestion.
Even having a "setup" video, I can only afford to buy maybe one tool per month. I have a list of tools that I buy over time.
@@marccrotty8447 Yeah same, but I like to update it when I find something either better in value for the same performance or better performance for the same value
@@ProjectFarm has more or less replaced "Consumer Reports". Keep it up! Every man on a budget out here in the world has the utmost respect and appreciation for you.
Torque test channel for impacts
Wow... Did not expect this video to come out right after I requested it! Thank you very much for making my video idea.
A follow up on Bluetooth OBD2 Scanners would be also very helpful too.
Thanks very much Todd ❤️
You are welcome! Thanks for suggesting the video idea. Thanks for the suggestion.
This was a great video! I would definitely enjoy watching a review on more capable code scanners. Thank you for all your hard work
Thanks and you are welcome!
Thanks so much for another excellent and useful video!
I need a scanner and this video helped me decide!
Thank you for all of your dedication providing honest results and opinions! It would also be great to see you do a video on the more expensive scanners also.
Thanks and you are welcome! Thanks for the suggestion.
This is definitely one of those I'd never think of to suggest but the moment I saw the title, I had to watch. So many code readers and so few true reviews till now. Thanks
Thanks for watching!
I have the Autel one. Works good. Autel makes some very good high dollar units as well. We used Autel and snap on in our shop.
Thanks for sharing!
I think you have perfecty made information accessible. ❤ enjoy your videos for years. Dad just saying information is essential
Awesome video man, I’m starting to buy cars for resale and this video definitely helped me figure out which scanner should help me out the most 👏🏽
My ELM327 and the Torque Pro app on my phone have been great for me for years. $20 all in for both.
Thanks for sharing!
So are you able to change air fuel ratios with this and does it tell you what the correct range should be?
been happily using this Torque-bhp pro app on every drive i take for many years now - this is the first @projectfarm video i ever fast forwarded due to no interest at all in these caveman devices... ;-)
@@jackkenny4194It's just a reader.
But does it tell you the solution to the problem? Autophix 3410 and Bluedriver do.
As always throughly done and entertaining. Thank you Todd
My pleasure!
Useful! I actually learned about some of the functionality of a low cost code reader that I didn’t know before.
Thanks for the feedback.
Great review! Yes let’s see the comparison for blue tooth and higher end scanners! I didn’t realize you could get so much capability for so cheap!
Was waiting for this one thanks so much
Thank you very much!
Love your work Sir! Thank you!
just bought the autophix for $35 shipped on amazon after watching. thank you sir!
Thanks!
Amazing video and thoroughly enjoyed it! A part II, more advanced one would be appreciated as well.
Thanks! Thanks for the suggestion.
Awesome review! The top 3 code reader problems we encounter are ABS Brake, Air Bag & Impact Sensor codes. Seems like manufacturers make reading and diagnosing these codes near impossible.
Thanks! Thanks for the feedback.
@farmhand3724: What are you talking about? The Ancel AD610 can do ABS system codes and reset, Airbag SRS system codes and reset, SAS,....It can do all those things.
Thank you for all your hard work!
My pleasure!
Buying the Autophix now! Thanks for the review!
Nice! You are welcome!
i started shopping for these a day before the video came out! great timing!
Thanks for sharing.
I agree on the BT Scanners. TOPDON TopScan would be a recommended BT scanner to consider reviewing.
Thanks for the feedback. Thanks for the video idea.
We were just talking about these five minutes ago. Great job.
Perfect timing!
YESSS... Please do more code scanners. I have an old innova and would love to see one or two featured
Thanks for the suggestion.
Thanks for the great video. As always! Hello from Finland!
Hello! You are welcome!
Perfect timing. My wife was just asking for a new one!
Wife wants a new scanner (wink wink) you bet, ordering it now😅
You guys have well trained wives. Good.
There's a reason why Scotty uses and promotes Autel scanners 😉
Thank you for the reviews. I always check your videos before major purchases 😁
Thanks!
Thank you so much for looking into these! I would love to see the comparison of the expensive ones for the higher end scanners.
You are welcome!
very helpful - great stuff as always
Thanks and you are welcome!
Absolutely, yes - I'd like to see a review on the bluetooth OBD2 readers and the software/apps which they connect to and o/s environment compatibility (i.e. works with Apple and/or Android). And less so - reviews of the next teir up from the ones in this video - say 70 bucks and up but not exceeding $200 - with, say, larger screens and more diagnostic abilities and maybe the option to select specific manufacturers and not just generic OBD2 profiles
Thanks for the suggestion.
My code scanner saved me likely a bundle! Coming back from my brothers (ROAD TRIP) had a CEL and no change in performance. Got home and scanned a LARGE evap leak and began looking. Apparently the canister and solenoid on my Town Car are under the trunk floor and while backing into his driveway I brushed that against a landscape rock (asteroid) just tall enough to knock the tube off the canister. An hour on a pair of jackstands fixed it for FREE! Even if you don't do your own work - educate yourself before seeing any mechanic you don't trust. Remember, if you don't know what a camshaft is - your car needs three of 'em!
Thanks for the feedback.
If you have double overhead cams you actually need 4 😂
Great info I got the BlueDriver and it works good. Thanks again for the great review.
Thanks and you are welcome
Hey Todd, your content = VERY IMPRESSIVE!
Thanks so much!
Would love to see one on the bidirectional tablet style models...Autel, Launch, OTC, etc.
Thank you for the video idea!
now comes the best brake cleaner.
Again I want to thank you for making those videos
Thank you for the video idea!
I have the Ancel and its worked for my proposes. For a basic reader its been pretty helpful.
Thanks for the feedback.
Todd, yes please look at some others (I have the Ancel AD 310 but also the Yakefly V317 and the Blue Driver Bluetooth Pro.} Love your channel!
Thanks! Thanks for the suggestion.
I have been pretty happy with the topdon scanner. You do need a phone with Bluetooth capabilities to make it useful though, which is sometimes inconvenient when your hands are dirty from car work and you don’t want to touch your phone.
The upsides is it’s only $60 and has quite a few useful bidirectional features. What’s really nice to me is it gives the voltage for all of my engines sensors which saves a lot of time compared to getting out the multimeter.
Good excuse for alex, or siri interfacing.