Creality CR-10s Pro V2 - Creality's Ultimate Printer? - Unboxing and Review
Вставка
- Опубліковано 27 лис 2020
- Hey everyone!
Welcome to my unboxing and review of the Creality CR-10s Pro V2!
Not to dissimilar to the original Pro V1, this upgraded version bolsters a new BLtouch to improved leveling. Regardless of the model you get; V1 or V2 you'll be over the moon with the quality. In a sense this review can apply to both the V1 and V2 just substitute the BLtouch for the EXabl induction sensor.
If you want to know anything more about what printers work best for large vs. small prints check my recent live stream!
• The Best 3D Printer fo...
Enjoy!
-------------------------------------------------------------------------------------------------------------------------
~~~Things of Interest!~~~
The Discord!
~Join our FREE Community Discord~
Chat all things 3D Printing, Cosplay, Nerd and More!
Free for everyone! A Great place to learn and grow!
/ discord
The Patreon~
~Help Support the channel and my content~
Want more interaction? Behind the Scenes? Special Contests and Prizes?
Check out my Patreon and help support my builds!
/ franklybuilt
~Check out my other Social Media!~
Instagram (Quickest way to talk):
/ b9bccrvhdqs
Twitch (Random Workshop Livestreams!)
TikTok (It's actually kinda funny)
www.tiktok.com/@frankly_built...
Twitter (I share all things Nerd):
/ frankly_built
Facebook (Tons of photos and Albums) :
/ franklybuilt
Reddit (Just have to see for yourself!):
/ njtricker609
~STL Files and 3D Models~
Want AWESOME 3D Models and Files?
How about a Discount code for 20% off everything!
DO3D Forum: tiny.cc/f3g0pz
Use Code "FBT20" at checkout!
~~My recommended 3D Printers~
Creality Official Website:
www.creality3dofficial.com?sca_ref=206063.FX8wJeSQM4
#creality #cr10sprov2 #review - Розваги
Thanks man I absolutely love your videos. It's definitely super helpful to see some of these printers in action and get these honest reviews
awesome vids! we will continue to improve!
Hi Creality can you send me a free ender 3
I need a sponsored printer creality!!!!! Lol
we all need 🤣🤣@@That_Stinger_GT5
By the way, Love your printers, probably my favorite company rn gonna buy cr-10-pro-v2 good luck with improving!
Thanks for this vid! Just got CR10s Pro V2 as my first printer and i was able to get a nice first test print after removing carriage wobble and bed leveling. Thanks again!
is it good and where can i buy it?
Thanks for this video, surprisingly there a very few videos on this printer. I just got mine and you've answered nearly all of the questions I had.
I've had one for about 6 months or so, excellent printer. I've put the magnetic plate on mine and swapped out the fans for noctua replacements so now its basically silent. Great video as always Frank, love your stuff!
Yeah I definitely need to do the same re: the fans! Sounds like a jet engine or something ... ridiculously loud! And I do like the stickiness of the stock print surface, but man it's so difficult to get stuff off -- flexible is so much better! Now just trying to dial in the print profiles, but I suck at that.
hello! what plate did you buy? im looking into getting this printer and would love to be able to do the same, thanks!
@@sarahscruggs2203 I got the official Creality flexible one from Amazon, in the uk its about £21. I completely took off the stock metal plate that was clipped in and stuck the replacement directly to what was left. Removing prints now takes seconds!
@@SuperheroDIY its easier than you might think, just remember to get some buck converters if you go for Noctua fans, so that you can bring the 24v down to 12v (apart from the power supply fan which on mine was 12v already)
@@duncanchivers8949 thank you Duncan!
Been researching for my first ever 3D Printer, you just convinced me to acquire the Creality CR-10s Pro V2. Thanks for the excellent videos and reviews> Keep up the great work!
you won't regret it. i got mine a few weeks ago and am just amazed at the print quality.
@@YaChoomba honestly it's an amazing printer. But I started our with an anet a8. Bottom of the line printer. But over 3 years I mastered that printer. Now i have the cr10s prov2 and it's a joke how easy it is. I'd recommend the ender 3 before spending 600 on the cr10s. But you can't go wrong either way
Perfect timing for this video because mine arrives today! So excited to get into 3D printing!
How’s it been working?
Yeah are you pleased about the result?
I just bought this printer as my first 3d printer. I can't wait to set it up and get printing! Thanks for the assembly dog's and don'ts.
I just ordered mine and I am so excited. Thanks for posting.
Frank, I have to say that I am so glad I subscribed to your channel. I bought this printer and am extremely happy with it. You taught me how to use and maintain it. Thank you so much! Also built the Iron Man MK85 and it turned out great. Such a great step by step process that you documented. You’re a great guy and a pro at what you do. Thank you!!!
awesome video mate! based on your video I will be purchasing this unit! thank you for sharing!
I just got my Cr10s Pro v2, your video made my decision complete thankyou!
Anyone else have minor panics everytime he enthusiastically grips his knife blade in the begining?! Lol great vid though
Thanks for this. Just bought one of these as an upgrade from a Flashforge Finder Lite. Great review!
Great Man ,i has cr 10 s pro v1 And Now im looking V2 ,thanks for the review
Man i was thinking of getting a 3D Printer for years now and finally i got the money and time to do so i really want to thank you for your dedication towards this and explanations about all those topics. way to go man keep goin and i'm lookin forward to learn more from you.
Which printer are you going to buy?
@@jahanomari5110 probably the CR-10S Pro V2
You deserve more. Your awesome never give up, you are sooo talented. Don’t even forget your dreams. I will never unsubscribe. I can’t wait for another video
Mannnnn thank you so much!
@@FranklyBuilt no problem
ive been looking at every printer i could find and liked the look of this one. you just sold me on it
I found you on Tik Tok now on UA-cam, wanted to say your Cura settings video saved my endor 5 and my anycubic chiron. They where about to be trashed because of so many issues. So you saved a $500 printer and $700 printer from being trashed. I can now print good prints on them again with better results.
Super timely vid! Mine came this morning! Have a Wham bam bed incoming, so I’m going to try and wait for it to dial it in from the start.
Total noob and your vids have been very helpful.
Hey no problem! Any feedback?
Love your vids bro
Love your videos man! Cannot express how much i appreciate you going into great detail to explain the positives and negatives for each printer. I’m new to the 3D printing world but LOVE cosplay and was looking at getting my first printer to make armor, weapons, and other bigger cosplay props in general. (a clone ARC trooper from Star Wars was what I was planning on doing for my first 3D printed cosplay project)
I’m Torn between the Cr-10 pro V2 or the ender 5 plus, and am unsure which one to grab. Price isn’t a problem as long as it will fit my cosplay needs :). Which one would you recommend over the other for cosplay? Any help or advice is seriously appreciated and keep the awesome videos coming man!
Hi, just wanted to ask for an update on which one you purchased and how it worked out for you?
Mine actually came with co-ordinates on the machine and filament in the nozzle so i assume they did some testing in the factory since it didn't show any signs of being used. Also i welded the fan duct back too its on its fourth weld :D Another point is to check those bed wires at the back. Mine were too taught and the wires split over time causing a thermal runaway error.
Great video! Watched i5 while I was assembling my new printer
Thanks for the video! Just added this guy to the collection!
Have you modded anything on it? (swap out the fans)
Unboxing large items often involves folding all the flaps out, turning the box upside down, laying it on the floor, and simply lifting the box off the item. There, youtube is full of free advice. You're welcome!
I also cut the sides of the box right off, and slide everything out on the floor so I don’t risk warping the thing before I even have it together. Order from Amazon so you have 30 days in case it shits the bed..
Wondering about how exactly the BLTouch system works from a user standpoint. Does it just give a mesh of bed heights, and based on the values read you have to adjust the bed manually with the knobs? How automatic is it?
BRO! JUST bought, assembled, and fired one of these up based on what you had in your workshop! Ha ha this is pretty freaking amazing timing.
Oh hell yeah!!
Thanks. Great Video.
I have this printer Frank, I added a wham bam made it much better. Been watching your vids they are great 👍 just done the magnet wireless iron man following your vid awesome buddy
Thanks for the video. I currently have an ender 3V2 but want to be able to print helmets without breaking down to multiple pieces. What kind of bed size would you recommend?
The music sounds kinda like the office theme 😂 also thx for the tutorial 😁
Nice video. So it it seems you cant adjust fan speed and flow rate while printing, is this true?
I love your vids
I love mine, you going to love it.
Thanks for the video my man, love the printer. I was almost sick tho with the camera movements lol maybe get a tripod?
Had it nearly 2 days and still haven't opened the box! I've been preparing for a job interview/assesment on Wednesday with the Prison Service, don't want to be distracted by wanting to print things yet :-D Just a 20 min tea break on here then back to interview preparation.
So i want to buy my first 3d Printer and i dont know if i should by the Ender 5 plus or the Cr-10s pro V2. Wich one of these makes the better prints and is faster? And who is easier to handle for are beginner? normally i would go with the ender 5 plus but now im Unsure if the Cr-10s pro V2 could be the better choice
So I was interested in 3D printing and after watching a lot of your videos. I purchased my first 3D printer. I've had it a week now and my Creality CR10s Pro V2 is great. I've only managed to do 3 prints but they have all come out great thanks to your tips and walk throughs. Thank you and looking forward to print more and watching more of your videos.
How's it going so far?
@@ItsTheNoob. Brilliant, Made 2 mk85 Iron Man helmets and started my glove. Couldn't be happier
I just got mine today and I'm having a heck of a time with the leveling. It's all over the place. Went through step by step with your video but the leveling is either like 6 inches off the bed or the nozzle will sit on the bed. I've been watching yours and other peoples videos and mine seems possessed. Any advice? Haven't even thought about trying to print anything.
First off, love your channel. Been learning a lot. I am getting ready to order my first 3d printer and was at first looking at the Ender 5 Plus and then saw this video. You had posted it a few days before I went on vacation. Now two weeks+ since you first posted, have you had a chance to do much more printing with this model? Are you still liking it? I have it in my cart on Amazon. 😊 Thanks for all of the really informative content,mucu appreciated!
100% still recommend. Just snag the 2 small upgrades I talk about, it’s a monster
@@FranklyBuilt thanks. I think I wasn't clear. Was looking at the 5 Plus but then saw this video and am leaning toward the 10-S V2 Pro. I think the two mods were for the 5 Plus, right?
@@MrInkBear oh dude my bad I so read that wrong. Not you’re fault at all. So
If you don’t mind tinkering just a little. 5 plus with those 2 simple upgrades. It’s faster and bigger
However If you just want print out of box? This giy
Great vid, thank you
first of all, want to say thank you ive been watching your videos to help me out with 3d printing and also some of your painting tutorials as well!
But do you have any video showing what upgrades you have done to your creality ender 5 plus. I've seen one already where you have upgraded the bowden extruder and bowden tube.
Hey thanks so much!! That’s awesome and I’m glad they helped!
So I have that video you saw. Then another video upgrading the silent board. And that’s all I’ve done. It’s perfect now and prints like a dream
Thank you! I'll make sure you watch that as well. Keep up the awesome content!
I just got one and I have been watching a lot of videos on the printer and there is a lot of people that say to upgrade the firmware on the printer itself and I was just wondering if I should or not and if so how would I go about doing that
I bought this printer a week ago partially because of your video review on it, I am really enjoying it, it is my first printer and learning everything is great. I was wondering though I saw some people say Cura can create a script to pause a print at a layer height so you can start a print and later change the filament when it pauses automatically. I did this in Cura and well it never paused. Do I have to update the firmware?
i know Im asking the wrong place but does any of you know of a method to log back into an Instagram account..?
I was dumb lost the password. I would love any assistance you can offer me!
@Kayden Rylan Instablaster :)
@Boston Mordechai I really appreciate your reply. I found the site through google and I'm trying it out now.
Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
i wish your camera was as focused as you are 😜😁🤣 nice video man👍 this is going to be my first printer 😁
Same
@@aiden.b3962 Since this comment i upgraded with an octoprint octopi and a webcam. no issues yet, loving it. also for my tpu FPV parts
Did you have the problem where the nozzle will ram into the bed after the first two bl-touch probing taps? When I hit leveling for the first time, the bl touch deployed properly and tapped the bed twice, then the nozzle just rammed into the bed and I had to turn it off. Any tips?
Maybe a year too late but did you ever figure out how to fix this? just got mine this week and had the same issue. I can only assume its a Z axis offset problem and have had a tough time resolving this. Any help is a appreciated.
Max vs v2. How long the max takes isn’t an issue. Which would you recommend?
Do you still recommend the CR-10S Pro V2? I'm debating getting it or the CR-10 V3. I know it's only about $100 more, but I wonder if it's better...
Nah I still think the pro v2 is much better
@@FranklyBuilt Okay cool, thanks for the quick reply man! I've never done 3D printing before, but I'm so excited to start.
I just picked one of these up hardly used, so ill be watching these vids and ill sub too 😊
Hey , i have this same printer and i really can't get the first layer to stock... I have tried leveling out the bed with the screws... The level meassurments seem less then those you had in this video, but still it seems it's printing the 1st layer in mid air (and then later it seems to be fine) so i'm not sure it's the z-offset at fault. Any tips, this i could check to troubleshoot?
Try checking out my How to Print video 4. That should help
I bought one of these used (husband bought it, wife didn't approve...I get it cheap, marriage saved!) I upgraded to V2, did the Tiny Machines FW and BL Touch upgrade. Also just received the Bondtech upgrade since my stock extruder is really a mess. Video soon once I get some prints and results to show :)
What’s the benefit of the tiny fw? How the fk do u turn off eco mode for ever? Thanks
@@tday67 shoot them an email. They are really good
Hi, awesome and clear review! I was wondering if this is still a good printer? I can get this model for around 450,- euros. Should I buy this or are there newer/better printers that I should check out?
Yeah I still love it
Hello I found your video very helpful, I hve the same printer but I am having issues getting the filament to stick to the bed I have trying releveling, make the bed hotter and cooler but it just will no stick. do you have any suggestions ????
Hope this printer goes in sale this Black Friday 🤞
hi. which is better the vyper or cr10s pro v2?
since vyper is coming with the magnetic plate and the rest is the same.
what is your recommendations?
Are there enclosures built for this printer, of will one built for a CR10s pro suffice? Is there a diy specifically for the CR10s pro v2?
I have no idea lol
Thanks for the video.
Did you print with gradient? How that option works? Is with multiple filament at the same time ?
Nah just one color
@@FranklyBuilt Thanks for the answer.
I read in the specs that it said that it could be printed with gradient. Looking on youtube the gradient refers to something like that.
ua-cam.com/video/rcVPuXZUx_M/v-deo.html
But, this can´t be done with this printer, right? What do you think?
@@bizcochodulce This printer can only print one colour at a time, unless you keep pausing the print and changing the colour/filament. OR you can actually buy RAINBOW filament which is multi colour, which this printer will accept no problem
Great video. How accurate is the BLTouch in mm?
Idk very? Haha 😆
Would you go this or the ENDER 3 MAX? no price issue, but have around the same build volume... Would it make a big difference the two z rods?
This all day. The elder 3 max is just a large render with creality parts. No dual z. No bl touch. No metal extruder
@@FranklyBuilt sold! Thanks for your prompt reply!
Hi
I got a cr-10s pro v2. And checking the belts, screws etc. When I slide the bed or the hotend, it kind of stops / jumps. Is this normal ? It seems to do it for every 360 degree wheel spin
Frank short question so i wont bother you
Ender cr10 v3 thoughts? Should i get it to print helmets and stuff like mjolner?
It’s a great printer
Mine came with a loose extruded also, but I haven’t been able to tighten it like you did.
Awesome advice on the printer, thanks so much! Just curious where you got the printer because I have found them on Amazon, the official website, ebay, and a few scam sites. Which one is the most trustworthy?
i got mines off the official creality website. Amazon should be fine too but if it's prime shipping they may be a bit careless. Either site is good IMO. Whichever has the best price should be the one you get.
Hey Frank, I'm getting my V2 Pro tomorrow. Any tips not stated in the vid?
edit: have you ever tried ABS or PLA+ or PETG
I use PLA+ all the time it’s great
@@FranklyBuilt is it noticeable stronger than normal PLA? Also is it harder to work with. I've only ever used PLA
I made my whole suit with it and all my props. Test some out!
Is this a printer bed large enough to print a helmet like the ironman ones you have in one hit? I'm looking at buying my first 3d printer and I am interested in this model 3d printer.
Yep absolutely
My heat nozzle keeps going through the bed even when setting z home to 0.2 above bed with the feeler. very frustrating. any ideas how to fix it?
I need to replace my power supply fan as they are making intermittent cheap bearing noises after 6 months of 10 hour prints, do you have a link ,the extruder fans seem fine so far. or a link to replace all of them, excellent printer other than that ,i see no part numbers in the manual
My Creality CR-10s Pro V2 was delivered 2 days ago. I have it assemble and have the bed leveled in under 2 hours and start printing immediately. I returned the Creality Ender 3 and Creality Ender 3 Pro V2 because they are just too painful to use. I have to upgrade this and upgrade that and still was not an acceptable 3D printer to me. The time that I spent in figuring things out, I might as well spend more and buy this better and bigger printer instead. Everything works and no grade needed, not even the springs on the bed! I get what I paid for and more. I don't want to be a 3D printer mechanic or technician. I just want to buy the printer and used it just like an inkjet printer without going through a lot of trouble. This is it. This is almost a plug-and-play 3D printer! Even connecting to the computer is easy. I use Cura 4.9.0 and I can send printer files to the printer without using the tiny Micro SD card.
So you shouldn't add any stick to this glass bed eh? Because it has a special ripple effects? Textured bed? I need your answer please thanks.
Yep. Just clean it
How would this compare to the SUNLU 3D Printer DIY Kit, Large Size FDM 3D Printer 12"x 12" x 15.5" with Dual Z Axis ,printer you reviewed?
This is light years ahead of it. This has solid parts
Just got this printer everything is working just fine then I tried to start a print and it did it's 16 point bed leveling check and it then just stopped moving after it went to the back right corner. However on the screen it shows that it is printing and eventually says it's 100% complete in a matter of minutes but the printer didn't even move at all. Bought a new SD card and still having the same issue. Any help would be great 👍
Will this printer print full size helmets in one piece?? Like a mandalorian or clone trooper helmet??
Yep
Mine just came in yesterday I'm setting it up today wish me luuuck
Which one would be a better buy for cosplay armor, CR-10s pro v2, ENDER-6, the SERMOON D-1?
or should I just jump ahead and get a Resin Printer like the ANYCUBIC Photon Mono X ?
Never used the other 2. I like the pro V2. And you don’t want to resin print full Cosplay suits
My next printer is either one of these or an Ender 5 plus 🤔
I I’ve been having problems with bed leveling after I set the bed and turn on auto level it keeps going back up and won’t print
I ended up getting the same printer and mine arrived today also. The price/deal was to good to pass up 🙂.
How much u pay for yours? I'm only paying $25/month
@@P3RCY it was in the UK and was approx £370
Me? Or these guys? I have 7 currently running.
The s8 is boxed up ready for a giveaway and 2 in my closet I’m fixing for my wife’s work lol
Curious if this will get answered or not but I'm thinking of buying this as a first 3D printer. But I'm a little concerned with the bed heat and possibly not being good for all types of materials like polycarbonate and nylons.
You need to research into what printers can handle that
what length is the printer with the bed all the way to the rear?
Can someone tell me what the actual footprint (base) size of the CR-10s Pro V2 is? I see different sizes on different websites
Did you manually level the bed before auto leveling? Also do you have a video tutorial on manually leveling it?
Nah I didn’t. I did a measuring sequence to see where it was. Then o did an aux level to adjust it. I have a video called “tips to a perfect first layer” that will help
@@FranklyBuilt awesome, thanks for the quick response. Love what you do, it’s helped me a ton. Still looking for my first printer.
@@FranklyBuilt just watched your filament stream….”bed trimming”. My bad :)
My prints won't stick - any advice? Hair spray doesn't seem to work, glue stick is hit or miss. You mentioned texture bed doesn't need either but I'm not sure what I'm doing wrong. I put a space heater because my room is a bit drafty. Bed leveling measurements are under 0.1. I changed to PLA+ filament. Should I try a PEI print surface? Struggling to print the sample files too so don't think it's a gcode issue.
What printer is it? The pro?
@@FranklyBuilt same one, CR10S Pro V2, I keep getting PLA spaghetti
That bed needs to be clean. No glue or anything. Just clean with alcohol
@@FranklyBuilt I tried that as well but the edges still lift up and the nozzle pushes the part out of the way
Thank you.
Hey Frank! Great vid as usual. We chat on Reddit sometimes lol. I’m hoping for some advice. I have an Anycubic mega i3 and mega X which I’m planning on returning. I like the big build volume but I want higher quality prints and more reliability. Would you recommend this creality or is there anything under $700 you’d recommend ??
This all day. Unless you’re okay working a little. Then get the ender 5 plus and add the 2 upgrades I showed in that build video
@@FranklyBuilt would you say the elder 5 has much better print quality ? My only experience has been with Anycubic and it’s been pretty good but dialing in the settings is a pain and the print surface never stays leveled.
@@hardyzfan253 actually yeah. It’s much more stable and you can print faster
Hey frank! I’m pulling the trigger this morning. I gotta ask, why do you recommend the ended 5 plus over this machine ? Just want to know before I make the decision. At this point, they seem extremely comparable in features and price is practically the same.
I only like the 5 plus more for its size and speed
So are you going to try to build your own bro? That is what I am currently doing because I hear it helps with learning to troubleshoot printers in general. Get to know the inner workings. If you ever want a kit let me know. I will give it to you at cost. I have to get my first two completed first. I plan on upgrading build volume to 350mmx350mmx500, and also employing direct extrusion. The reason I want to try this with ya is so I can get feedback in regard to functionality from someone with experience.
Nah it’s just not worth it anymore
so i know you can print off amazing helmets and masks with this, and this may be a dumb question but... can it print small items with fine details like small figures of different characters?
Yep! Absolutely
Have you swapped the stock fans to Noctuas ? Is it necessary?
Nope. Don’t think so
Hello. I have a new CR 10S PRO V2. After successfully manual leveling and doing the 25-point check, I try to print, but the nozzle starts to extrude PLA a few millimeters above the bed. Does anyone have an idea why that is?
Would you recommend this for helmets? is the bed big enough?
Yep!
So I just got this printer and sadly my gantry is super loose. However when I try to tighten it nothing happens. Not sure if my screw is bad or what but I literally just got it out the box.
Hi Frankly,
could you give your retraction set ( speed and distance ) you use on Cura for the CR10S Pro V2
i have a lot of stringing and not find solution for eliminate
many thanks
I keep all of that stock.
@@FranklyBuilt ok thank you for your answer, it seemed to me to have seen that you were leaving everything in stock, it's weird that I have stringing
anyway thank you for the help
As this is a year old is there a model that you would advise over this model
I bought the creality ultra glass base. Every print leaves a little filament behind on the bed that simply won't come off. Its like a shadow of the print i made. I can't get it off. i've used alcohol and soap. Does this happen for anyone else? No matter how hard i scrub or how long it just won't come off. ive even tried heating the bed to 80 degrees but that didn't help. No problem with adhesion. in fact i have to usually put in the freezer for a few minutes for it pop loose.
Is this the best one you recommend for beginners?
Thinking about buying this. Have you considered converting it to direct drive?
Nope. Not worth it. Direct drives are overrated now unless you want to print flexible sand exotics. A DD will just slow this one down
@@FranklyBuilt Danke for a fast response.
Lol very technical 🔥
I’m saving for a cr 10 v2
I have a question, this printer can print with filaments like CF PC?
I’m not actually too sure about that
Just bought this model, any tips for after I start a print it does the auto level it stops, the display says it’s printing but nothing moves
You may need to flash the firmware. That’s wearied