The best detailed instructions on installation of the Kwikset Montara Model set yet. Thanks to your video, all my fears of installing this set myself has been completely wiped away and replaced with confidence. If I can't do it now, something is terribly wrong. Thank you much.
Hi Dee. That is such a sweet comment to read💗. Thank you so much for watching and leaving such a great review, I really appreciate it! YOU CAN DO IT!!!!☺️
Thank you for posting this! I couldn’t understand the diagram and directions that came with it, but you made it so easy. You saved me a call to a locksmith.
Thank you for this video. Watched before installing the handle lock set. Very good instruction. I replaced another handle set and I lucked out and didn't need to drill a hole for the bottom, it lined up with the new handle.
I was having problems getting the handle and doorknob together until I saw your video showing you turning the round piece of the handle. I like Kwikset but the printed instructions are not so good - to many pictures and not enough words. This video should be on their website. Thank you!!
How do I get the lock orientation to turn the same way? My deadbolt locks to the left as it should, but the bottom handle lock turns right to lock. How do I switch that?
Hi Christina. Thank you so much for watching the video and leaving a question. Unfortunately, that is how locks work. You would think that they would both lock the same direction, but the two locks work differently. The deadbolt is just a simple mechanism of turning the lock to engage the bolt into the door jamb. The doorknob lock works by engaging pins / cylinders in a particular direction so that the doorknob is not allowed to turn. Because these two locks engage the locking mechanism in different ways, the key has to turn differently to achieve this. I'm not aware of any lock set out there that allows the key to operate in the same direction for both locks. I have found this issue to be the case with each set that I have installed regardless of the maker. I hope that this information helps.
@@MrBababuwi Hi.Thank you for watching the video. These locks are called smart locks because they can all be re-keyed to one single key. It ends up being a really good thing when you have multiple exterior doors. As an example, I have six exterior doors on my home. Instead of paying a locksmith to rekey all six doors, I purchased these smart key door knobs when I remodeled my home and I was able to rekey them all to one single key by myself.👍
If anyone comes across a loose door latch or deadbolt and wants a solid repair that doesn't involve glue, stick, putty, or that ugly metal sleeve that ruins the look of your door, ReSecure Latch is that answer. ReSecure Latch sits inside the door alongside the latch, resecuring your loose latch from the INSIDE. Great for property maintenance, homeowners, and DYiers. Works with brands like this Kwikset smart key lock set used in this video, and many other major door hardware brands.
I have this same lock in gold. Installed on the same side as your video. the bottom locks counter clockwise in your video. Mines lock clockwise how do I fix this? I’m trying to match up with the deadbolt which locks counter clockwise.
Hi. Thank you for watching the video. This is what I know to be true about locks. Deadbolts are a simple mechanism with a simple twist to the right to engage the bolt into the jamb and then a simple twist to the left to disengage the bolt. Doorknob locks don't work that way. As far as I know, and for all the knob locks in my house, they all unlock by turning towards the jamb and lock by turning away from the jamb. I don't believe that there is much choice. That's how they are manufactured. If your lock only goes one way, I believe that it is designed by the manufacturer and cannot be changed. The only option for these types of door handles is to change it from right side to left side of the door, depending on your door swing, by twisting the barrel around. But the locking mechanism itself is built in and cannot be changed. I Hope that information helps.
Question. I did mine and it looks like I did everything someway but to lock it locks to left and to unlock is to the right. Is there a way I can change that?
Hi Junior...great question! The answer is that unfortunately, that is how locks work. You would think that they would both lock the same direction, but the two locks work differently. The deadbolt is just a simple mechanism of turning the lock to engage the bolt into the door jamb. The doorknob lock works by engaging pins / cylinders in a particular direction so that the doorknob is not allowed to turn. Because these two locks engage the locking mechanism in different ways, the key has to turn differently to achieve this. I'm not aware of any lock set out there that allows the key to operate in the same direction for both locks. I have found this issue to be the case with each set that I have installed regardless of the maker. I hope that this information helps.👍
That's a great question! Sorry about not mentioning that. I went onto the Kwikset website and was surprised to see that they don't even mention anything about the size of drill bit. I would have to say a safe bet would be that I used a 5/16" drill bit. You do have the handle on the front side and a plastic decorative washer on the back side. so, if you drill the hole a little larger than the bolt, everything should still be well hidden for you. I hope this information helps! thank you so much for watching 👍
Hi Pete....great question. I just pulled up the specs for you and it looks like the lock set is made for a standard. 1 3/4" inch thick door. The latch can be adjusted from 2 and 3/8 inch to 2 and 3/4 inches away from the edge of the for, but the door thickness is maxed out at 1 and 3/4 inches. I hope this information helps 👍
Hi Nick. Thank you for watching the video. I'm not sure which lock you are referring to. You mentioned the bottom lock but there's only one lock on this door handle. Can you give me more information?
@@YouCanDoIt2 I'm talking about the lock on the handle. It locks to the left and I would like it to lock to the right like the dead bolt on top. Thanks
@@nickhernandez4685 oh, now I understand what you are referring to. Deadbolts are a simple mechanism that is a simple twist to the right to engage the bolt into the jamb and then a simple twist to the left to disengage the bolt. Doorknob locks don't work that way. As far as I know, and for all the knob locks in my house, they all unlock by turning towards the jamb and lock by turning away from the jamb. I don't believe that there is much choice. That's how they are manufactured. Hope that information helps.
@@nickhernandez4685 Hi Nick. I totally agree...it is weird how the locks are opposite each other. I'm not sure why that is, only that every lock on my exterior doors do the exact same thing, and they are all different brands from each other. Thanks again for watching our video and taking the time out to comment, really appreciate it!
I live alone. I own my own house. I was able to remove the Kwikset piece that is flushes against the door. I tried using a flat screwdriver to try and remove the round piece, but unfortunately, I have not been to remove the round piece no matter how hard I try. My door is only 2 years old. I have been watching/viewing several videos on UA-cam, but so far, I have NOT found one that can help me remove the round flat piece. The screws on my doorknob are hidden.
Hi Nancy. If I am understanding you correctly, you are trying to remove the little round disc that is inside the house side of your door on the very bottom of the handle. If that is correct sometimes those do not pop off they actually unscrew. You might want to try unscrewing it. If that doesn't work look at the very bottom of the disc and see if there is a little slot that you can insert a flat head screwdriver into to pop it off. If I was to guess this sounds like it is a disc that you have to just put pressure on to and unscrew it. I hope this information helps you 👍
I was trying to connect the bigger handle into the inside part inside and I cannot get it to fit properly. It fits if I put the big handle upside down. Lol I’m so mad right now. Trying to search for answers. Could’ve gotten it if my door opened the other way. Then I took apart the spring part and tried flipping the piece to the other side and it broke.
Oh no, that's horrible! I'm sorry to hear that. There is an option for making it fit in a left swing or right swing door. You needed to switch a button on the inside that allowed for it to be turned. At this point I don't know if it's broken beyond use.
The best detailed instructions on installation of the Kwikset Montara Model set yet. Thanks to your video, all my fears of installing this set myself has been completely wiped away and replaced with confidence. If I can't do it now, something is terribly wrong. Thank you much.
Hi Dee. That is such a sweet comment to read💗. Thank you so much for watching and leaving such a great review, I really appreciate it! YOU CAN DO IT!!!!☺️
Exactly!
Thank you for posting this! I couldn’t understand the diagram and directions that came with it, but you made it so easy. You saved me a call to a locksmith.
If any other first time home buyers are watching this. The specific drill bit to use to make the hole is 3/16 👍🏽👍🏽
Thank you! Going to install my set this weekend!
Thank you for this video. Watched before installing the handle lock set. Very good instruction. I replaced another handle set and I lucked out and didn't need to drill a hole for the bottom, it lined up with the new handle.
Thanks for the video. Yours was the only one that explained how to use the template, especially for the screw hole for the bottom of the handle.
I was having problems getting the handle and doorknob together until I saw your video showing you turning the round piece of the handle. I like Kwikset but the printed instructions are not so good - to many pictures and not enough words. This video should be on their website. Thank you!!
Thank you! Just installed my new Kwikset Montara and it was super easy with your guidance. :)
Thank you for watching the video and leaving a comment. I'm so glad that you were able to install this yourself. You Can Do It 🎉
Great job guys. Simple and straight to the point! I'm ready to get'er done.
Very nice. Much more detailed and realistic than the other video I watched.
Thank you so much for watching the video and leaving such a nice comment, always appreciated! Best wishes on your project 👍
Thanks for putting together this wonderful video. My F.O.I., ( fear of installation) is cured!
How do I get the lock orientation to turn the same way? My deadbolt locks to the left as it should, but the bottom handle lock turns right to lock. How do I switch that?
Hi Christina. Thank you so much for watching the video and leaving a question. Unfortunately, that is how locks work. You would think that they would both lock the same direction, but the two locks work differently. The deadbolt is just a simple mechanism of turning the lock to engage the bolt into the door jamb. The doorknob lock works by engaging pins / cylinders in a particular direction so that the doorknob is not allowed to turn. Because these two locks engage the locking mechanism in different ways, the key has to turn differently to achieve this. I'm not aware of any lock set out there that allows the key to operate in the same direction for both locks. I have found this issue to be the case with each set that I have installed regardless of the maker. I hope that this information helps.
@@YouCanDoIt2 I appreciate your response. Thank you!
Thank you so much for the video. It helped this single momma here lol😅
That looks awesome. We need to change ours because the front locks are cheap. I may just get this and install it myself!!!
You Can Do It!!!
Thank you for sharing but I would like to know what’s smart about this lock?
@@MrBababuwi Hi.Thank you for watching the video. These locks are called smart locks because they can all be re-keyed to one single key. It ends up being a really good thing when you have multiple exterior doors. As an example, I have six exterior doors on my home. Instead of paying a locksmith to rekey all six doors, I purchased these smart key door knobs when I remodeled my home and I was able to rekey them all to one single key by myself.👍
Great video. Great job guys.
Thank you so very much for the amazing explanation I got it right because of your video
Hi Deia! That is awesome 🎉🎊🎉. Thanks so much for watching and leaving a comment. They are always appreciated 👍....YOU CAN DO IT!!!
If anyone comes across a loose door latch or deadbolt and wants a solid repair that doesn't involve glue, stick, putty, or that ugly metal sleeve that ruins the look of your door, ReSecure Latch is that answer. ReSecure Latch sits inside the door alongside the latch, resecuring your loose latch from the INSIDE. Great for property maintenance, homeowners, and DYiers.
Works with brands like this Kwikset smart key lock set used in this video, and many other major door hardware brands.
Are you able to flip the latch to face the other way? Installing on the right side.
Thank you so much. I love you guys so much for this
Hi! Thank you so much for watching the video and leaving such a nice comment. I'm glad we could help you with your project 👍
I have this same lock in gold. Installed on the same side as your video. the bottom locks counter clockwise in your video. Mines lock clockwise how do I fix this? I’m trying to match up with the deadbolt which locks counter clockwise.
Hi. Thank you for watching the video. This is what I know to be true about locks. Deadbolts are a simple mechanism with a simple twist to the right to engage the bolt into the jamb and then a simple twist to the left to disengage the bolt. Doorknob locks don't work that way. As far as I know, and for all the knob locks in my house, they all unlock by turning towards the jamb and lock by turning away from the jamb. I don't believe that there is much choice. That's how they are manufactured. If your lock only goes one way, I believe that it is designed by the manufacturer and cannot be changed. The only option for these types of door handles is to change it from right side to left side of the door, depending on your door swing, by twisting the barrel around. But the locking mechanism itself is built in and cannot be changed. I Hope that information helps.
@@YouCanDoIt2 thanks for your rapid reply 😊
Very good job you saved me thank you very helpful
Question. I did mine and it looks like I did everything someway but to lock it locks to left and to unlock is to the right.
Is there a way I can change that?
Hi Junior...great question! The answer is that unfortunately, that is how locks work. You would think that they would both lock the same direction, but the two locks work differently. The deadbolt is just a simple mechanism of turning the lock to engage the bolt into the door jamb. The doorknob lock works by engaging pins / cylinders in a particular direction so that the doorknob is not allowed to turn. Because these two locks engage the locking mechanism in different ways, the key has to turn differently to achieve this. I'm not aware of any lock set out there that allows the key to operate in the same direction for both locks. I have found this issue to be the case with each set that I have installed regardless of the maker. I hope that this information helps.👍
@YouCanDoIt2 okay. I thought I did something wrong but with your answer you have answered all my questions. Thank you!
What size drill bit did you use to make the hole in the door?
That's a great question! Sorry about not mentioning that. I went onto the Kwikset website and was surprised to see that they don't even mention anything about the size of drill bit. I would have to say a safe bet would be that I used a 5/16" drill bit. You do have the handle on the front side and a plastic decorative washer on the back side. so, if you drill the hole a little larger than the bolt, everything should still be well hidden for you. I hope this information helps! thank you so much for watching 👍
Well done. Thanks!
Can I use that same brand and model on a 2” thick iron door?
Hi Pete....great question. I just pulled up the specs for you and it looks like the lock set is made for a standard. 1 3/4" inch thick door. The latch can be adjusted from 2 and 3/8 inch to 2 and 3/4 inches away from the edge of the for, but the door thickness is maxed out at 1 and 3/4 inches. I hope this information helps 👍
Very helpful, thanks!!
Thanks!
Thank you so much for watching the video. An extra HUGE thank you for the super sticker!🎉🥳🎉
Why does the bottom lock locks to the left and unlocks to the right?? Can't see a way to change it like the bolt on top. Thanks
Hi Nick. Thank you for watching the video. I'm not sure which lock you are referring to. You mentioned the bottom lock but there's only one lock on this door handle. Can you give me more information?
@@YouCanDoIt2 I'm talking about the lock on the handle. It locks to the left and I would like it to lock to the right like the dead bolt on top. Thanks
@@nickhernandez4685 oh, now I understand what you are referring to. Deadbolts are a simple mechanism that is a simple twist to the right to engage the bolt into the jamb and then a simple twist to the left to disengage the bolt. Doorknob locks don't work that way. As far as I know, and for all the knob locks in my house, they all unlock by turning towards the jamb and lock by turning away from the jamb. I don't believe that there is much choice. That's how they are manufactured. Hope that information helps.
@@YouCanDoIt2 okay thank you. It just weird that one locks towards the jam and the other away from the jam
@@nickhernandez4685 Hi Nick. I totally agree...it is weird how the locks are opposite each other. I'm not sure why that is, only that every lock on my exterior doors do the exact same thing, and they are all different brands from each other. Thanks again for watching our video and taking the time out to comment, really appreciate it!
Anyone know how to remove the cylinder built into the handle to rekey without original key? Doesn't seem to be the same steps as a standard knob
I live alone. I own my own house. I was able to remove the Kwikset piece that is flushes against the door. I tried using a flat screwdriver to try and remove the round piece, but unfortunately, I have not been to remove the round piece no matter how hard I try. My door is only 2 years old. I have been watching/viewing several videos on UA-cam, but so far, I have NOT found one that can help me remove the round flat piece. The screws on my doorknob are hidden.
Hi Nancy. If I am understanding you correctly, you are trying to remove the little round disc that is inside the house side of your door on the very bottom of the handle. If that is correct sometimes those do not pop off they actually unscrew. You might want to try unscrewing it. If that doesn't work look at the very bottom of the disc and see if there is a little slot that you can insert a flat head screwdriver into to pop it off. If I was to guess this sounds like it is a disc that you have to just put pressure on to and unscrew it. I hope this information helps you 👍
love the mazzuza
I was trying to connect the bigger handle into the inside part inside and I cannot get it to fit properly. It fits if I put the big handle upside down. Lol I’m so mad right now. Trying to search for answers. Could’ve gotten it if my door opened the other way. Then I took apart the spring part and tried flipping the piece to the other side and it broke.
Oh no, that's horrible! I'm sorry to hear that. There is an option for making it fit in a left swing or right swing door. You needed to switch a button on the inside that allowed for it to be turned. At this point I don't know if it's broken beyond use.
locks that open in a minute 😅😅
Kwikset