YungC4M Archive hey brother man have you found anything start to finish with all accessories and how to set up properly? Thanks for your time and help in this matter. Happy Growing
Although not mentioned, when setting up a grow area do not wear your street shoes in the tent. They can track bacteria, fungus, bugs, etc from outside. Put on a pair of clean socks of buy a cheap pair of flip flops to use only when in the grow area.
Great advice! Thanks David, very true. When I use to grow in my bedroom I made the mistake of doing just that and I had to battle spider mites for the last 2 months of my grow.
Built my own 10 by 10 with a clear roof. I can run lights at night and sun during the day and also control watering. It is open on 3 sides for ventilation. I live in Hawaii.
Beware, I failed to recieve all items in a timely manner. Read the site, things that are preorder items are not listed. The only thing listed as pre order was the ph meter. I still have not recieved coco, clip on fans, nutrients etc. Was told there was no supervisor to speak to as well. Check the BBB reviews before ordering and beware. I have called numerous times and have recieved the run around. The last time I asked to speak to a supervisor I was hung up on.
For a double ended single light hood is it best to suck hot air through the tubular end of the light or exhaust across and out the tent?? Thanks for all you do one of the best in the UA-cam world. Thanks for your time and help in this matter. Happy Growing Day, Derek
Exhaust fan is in the wrong spot. The fan is sucking air out, and you will get air/smell leaking through where the glass on the lights sit. By putting the exhaust fan right after the carbon filter, your blowing the air out. As the air passes through the light fixtures, any air that escapes will pass back into the room.
Shawn I was also under the impression the carbon filter ducting should be exhausted out of the tent ad then a separate fan bringing in fresh air into the tent??
Again, its all preference and relative to a specific grow. You my already have a cool tent, therefor only needing to cool your hood/light/upper half of your tent.
You might want to check out ceramic metal halide lights. They use half the watts with half the heat and produce the most accurate copy of the sun. I got two Hydrofarm Phantoms. Good for veg and flower. So, you only need one light for the whole process.
so oyur big problem is your pulling air through the light before the carbon so if any air leaks in light shades equals bad smells u should have the light on a sepreate air loop to the carbon filter
Oscillating fans do not remove hear they circulate the air round more and give the plants a more natural environment replicating wind etc.. also the way the carbon filter has been setup is wrong it should be vented out of the tent not recirculating the same air back in other wise the whole use of the carbon filter is pointless lol hence why it’s called a filter.. the air that is been sucked out of the grow tent should be vented out somewhere to remove odor you should then have a separate fan without a filter sucking in fresh air from an outside grow room source and been brought directly into the top of the tent. Not the bottom as it could chill the pots. And never ever ever ever spray wd40 inside a grow area lol..
Hey sorry to mention i noticed you placed the carbon filter in the corner of the tent, one side of the filter is directly touching a wall would that not compact the filtration? Kind of feel placing the filter in the middle of the room or at least a position were there is 100% uninterrupted air filtration would always be better for the fan and filter and overall exhaust.
For that price im sure its everything. The filters and inline exhaust fans are pretty ineffective at stopping smell. Thats why you should build your own grow tent with poles and plastic and spend your money on separate filters and fans.
Can someone explain why the end of the ducting just goes back into the tent to make a complete loop?... I thought you would want the duct exhausting somewhere outside the tent or better yet outside the property all together? Their is no fresh air entering with your method as far as I understand only circulating air
GrowAce How do you filter the air cling in does a filter can go outside the tent connected to a intake fan can you do video on this or have a recommended link? Thanks for your time and help in this matter your videos are very appreciative👍🏻🤪
whats the difference in setting the fan up before the light so it pushes the air through instead of pulling it? which is better? and is an intake fan a must? i have a 5x5 tent getting a 1000w light and im a little confused as to the the ventilation setup. thanks for the advice in advance!
Best practice is ensuring you pull air out of your grow tent instead of pushing it. Here's another video we did that helps explain it. Let me know if it clears things up for you: ua-cam.com/video/6JHBEG1x0n4/v-deo.html
Although pulling air is more efficient than pushing air; Everest Fernandez explains that you should push the air through the lights, so you can prolong the life of your fans. All that heat may be bad for your fans. I am not sure. Just wanted to post another point of view.
Jason Litson what I have since found out is that by installing the fan to suck air thru the filter and push through the air cooled light and out of the tent is that it creates positive pressure which prevents any unfiltered air from getting into the system via any potential air leaks which could cause oder in the exahaust! If that makes sense.
Yes, makes perfect sense, and this is exactly how I planned to set up my system. I changed it though, because in this setup it would be pulling all of my air conditioned air out of the room. So I use one fan pulling air from a closet with a simple AC filter on the inlet, that pushes air through my hood, and then out of the grow area. I use a second fan connected to my carbon filter, but does not exhaust, and also creates a negative pressure. I didn't want to spend the extra money on a second fan, but I also don't want to blow all my cooled air out of the room. In this way my AC kicks on for 1 minute about every 15 minutes or so.
dont cheap out and combine lamp blower and tent vent blower into one. Please. Been there done that. Its the cheap skate route. The PROPER way is to use a blower (s) for the lamps as a SEPERATE closed loop system. The blower for this is hooked to the lamps timer. And use INSULATED ducting...trust me. For your tent ventilation...use its own blower/filter and duct HOOKED TO A COMBO HUMIDISTAT/THERMOSTAT. Again ...trust me. Get off your wallet and do it proper. Been there done that. You dont want moist smelly air passing through a filter and then through your lamps. Its the cheap skate ghetto way. Remember....lamps on thier own SEPERATE blower system (SUCKING OUT). And dont just dump it into the room the tent is in. Actually get rid of it completely. by blowing it outside. Same with tent venting exhaust system. Your gonna have to cut some holes and slap some flanges up somewhere. I replaced one of my basement windown with plywood and use a 6" hole saw bit. Its a must. Do it proper folks...trust me...the first time so your not battling problems in the middle of a crop. Read my post above on how to set it all up the correct way.
@Nigel Kent ive got my own strain in at the min i crossed white russian with jack herer. Took me 5 years of backcrossing to get a stable strain with characteristic's of both the mother and father. The jack i used as a mother first go then just kept crossing and back crossing until i was getting similar plants from all the seeds. Ive never had the pleasure of trying star dog but ive heard its a nice strain. Good luck with your crop may the Ganja gods bless your green fingers and give you a bumper crop lol. Do you make any concentrates with your waste? Me and a friend have just invested in a closed loop extraction machine and a vaccum oven and the oil we're getting is 1st class. With our extraction machine it can use either butane or CO2 and we've just used CO2 upto now. Id definitely advise looking into how to process your waste because its surprising how much you can get just from the waste. From waste of 10 plants youre looking at about 25 to 30 grams of oil.
those things around the box usually come with tabs you can just pull so it can come apart. dont really need scissors... as for the tape and bx thats a different story
Hi there How many lights does the 7ftL 2ftW tent require? For 6 plants? And what watt would the bulbs need to be? I'm just starting out and I've been reading some of the stuff you have been posting. Even where you explain how to work this problem out but am apsalutly rubbish at maths.. could you help me out with my problem please?
Hello, to start we think 6 plants might be aiming high for that kind of tent, depending on what size you want them to reach. Depending on what king of light you want to run you could have several set ups.
I wanted to buy a few things from their website but for some reason it keeps saying I dont have permission to access their website, but i could before. as if i was banned. that sucks. I was going to spend alot of money.....
Most tents are usually idiot proof to setup tbh, its like simple lego or kinex. Had many tents and only had 1 that required you to be a MENSA candidate to setup lol Someone was smoking crack when they made that one, thing was just a nightmare, eventually got it setup with liek half the box leftover.
Sucking through air-cooled hoods always causes smell to be sucked in after the filter. You either need to blow through air-cooled hoods to create a pressure so no smell can get out.
I don't understand why it needs a ventilation system? Plants can generate oxygen by themselves, isn't it?? Also, you can leave the tent opening with a small gap to get fresh air, isn't it. Thank you.
Hey everyone! Thanks so much for watching our complete grow tent package setup! We started a weekly grow series with this exact setup! Check out our week 1 grow journal here: ua-cam.com/video/vS2XJx5jjxk/v-deo.html
GrowAce just so you know the link in the description is bad, it says error page not found blablabla, anyways i still got to see the store, thanks keep it up
Do not purchase anything from this company they are a scam! Here is the email i sent the company! They did the worst to me and robbed me for $350. This was my email to the company that will explain what i went through Hello Christian or whoever sees this! Growace is the worst company I have ever done any business with. This company should not be in operation with the way you guys treat customers. In January, I spent a total of $4,000 with you guys and it has been a complete disaster. My products took over a month to arrive, and when it did arrive, so many items were missing and I had to keep calling to have these items sent and even after that, it took another 2 weeks to get my oxygen pot commander. When i decided to set it up, nothing worked. I have been trying to get this piece of shit to start for over a month and it has not worked. I called you guys over 30 times in a month, all you guys did was give me a run around every fucking day. After a month with dealing with this, come to find out it was not receiving power. Instead of doing the right thing, you guys instructed me in an email to open the machine with a screw driver and I got electrocuted twice because this piece of shit is cheaply made and whoever put it together, did not plug the wires. How the fuck are you guys selling things that are not safe and properly put together? I am not an electrician and what you guys did was fucked up and I could have loss my life because of this. After carefully installing the wires, the machine finally started but it's not working properly. It fills the pots but it doesn't drain and i did everything correctly. I should not have to deal with this and its fucked up. I have never seen a company like this. I am tired of this and I will not go back and forth anymore for something that is under warranty, its your job to fix this, not my job. Growace is not a professional company at all! Growace is selling products with no instruction manuals and you guys tell people to go on a website to find the manual and the website doesn’t even exists. How are you guys selling products without instructions? On top of that you guys tell me to go look on UA-cam for the instructions and the instructions are not only incomplete but these are instructions for old machines that you guys don’t even sell anymore. At this point, I am fed up with being angry and frustrated and my plants are dying because of this and I am ready to pursue legal action against you guys for pain and suffering if this is not resolved by Monday during business hours.. Not only I will pursue legal actions, I will destroy the reputation of your company by reporting you guys to the Better Business Bureau, take you guys to small claims court, and I will put negative reviews on your website and will open up multiple UA-cam accounts to slender your company and ruin your sales opportunity and find every Growace video on UA-cam and comment on every videos to make sure that no one buys your products. The last company who did this to me almost shut down 7 years ago and had to pay me to remove my videos which ruined their sales.This is the worst experience I have ever had and I feel stupid to believe that because I spent so much money with Growace, they would actually treat me like a human being. Maybe you guys treat me like this because my voice sounds black and you guys are discriminating against me and treating me like a piece of shit.
Do not purchase anything from this company they are a scam! Here is the email i sent the company! They did the worst to me and robbed me for $350. This was my email to the company that will explain what i went through Hello Christian or whoever sees this! Growace is the worst company I have ever done any business with. This company should not be in operation with the way you guys treat customers. In January, I spent a total of $4,000 with you guys and it has been a complete disaster. My products took over a month to arrive, and when it did arrive, so many items were missing and I had to keep calling to have these items sent and even after that, it took another 2 weeks to get my oxygen pot commander. When i decided to set it up, nothing worked. I have been trying to get this piece of shit to start for over a month and it has not worked. I called you guys over 30 times in a month, all you guys did was give me a run around every fucking day. After a month with dealing with this, come to find out it was not receiving power. Instead of doing the right thing, you guys instructed me in an email to open the machine with a screw driver and I got electrocuted twice because this piece of shit is cheaply made and whoever put it together, did not plug the wires. How the fuck are you guys selling things that are not safe and properly put together? I am not an electrician and what you guys did was fucked up and I could have loss my life because of this. After carefully installing the wires, the machine finally started but it's not working properly. It fills the pots but it doesn't drain and i did everything correctly. I should not have to deal with this and its fucked up. I have never seen a company like this. I am tired of this and I will not go back and forth anymore for something that is under warranty, its your job to fix this, not my job. Growace is not a professional company at all! Growace is selling products with no instruction manuals and you guys tell people to go on a website to find the manual and the website doesn’t even exists. How are you guys selling products without instructions? On top of that you guys tell me to go look on UA-cam for the instructions and the instructions are not only incomplete but these are instructions for old machines that you guys don’t even sell anymore. At this point, I am fed up with being angry and frustrated and my plants are dying because of this and I am ready to pursue legal action against you guys for pain and suffering if this is not resolved by Monday during business hours.. Not only I will pursue legal actions, I will destroy the reputation of your company by reporting you guys to the Better Business Bureau, take you guys to small claims court, and I will put negative reviews on your website and will open up multiple UA-cam accounts to slender your company and ruin your sales opportunity and find every Growace video on UA-cam and comment on every videos to make sure that no one buys your products. The last company who did this to me almost shut down 7 years ago and had to pay me to remove my videos which ruined their sales.This is the worst experience I have ever had and I feel stupid to believe that because I spent so much money with Growace, they would actually treat me like a human being. Maybe you guys treat me like this because my voice sounds black and you guys are discriminating against me and treating me like a piece of shit.
FINALLY.
UA-cam lacks in full grow tent setup guides, thank you much.
YungC4M Archive hey brother man have you found anything start to finish with all accessories and how to set up properly? Thanks for your time and help in this matter. Happy Growing
Although not mentioned, when setting up a grow area do not wear your street shoes in the tent. They can track bacteria, fungus, bugs, etc from outside. Put on a pair of clean socks of buy a cheap pair of flip flops to use only when in the grow area.
Great advice! Thanks David, very true. When I use to grow in my bedroom I made the mistake of doing just that and I had to battle spider mites for the last 2 months of my grow.
David Myers these are things new growers need to know! Great advice! It's all the little things that add up in the end!
David Myers
Interesting tip that I've not heard or seen anywhere else, yet so obvious! Thanks. This is totally in line with grow room cleanliness being crucial.
David Myers zeefdw
Getting this tent was Probobly the best thing I’ve ever invested in.
Did you use the same HID lights ? Did you buy a ac unit for the tent or was the room the tent was in cold enough itself
Built my own 10 by 10 with a clear roof. I can run lights at night and sun during the day and also control watering. It is open on 3 sides for ventilation. I live in Hawaii.
Awesome video man. I remember the very first time I put up my 5x5x6.7' I was so excited I didn't even look at the directions or UA-cam videos.
I showed this video to my dog Skippy and he liked it
Beware, I failed to recieve all items in a timely manner. Read the site, things that are preorder items are not listed. The only thing listed as pre order was the ph meter. I still have not recieved coco, clip on fans, nutrients etc. Was told there was no supervisor to speak to as well. Check the BBB reviews before ordering and beware. I have called numerous times and have recieved the run around. The last time I asked to speak to a supervisor I was hung up on.
Still waiting.......
@@peterowen9239 anything ?
Hey Pete
Glad to see things have changed not there customer service is still fucked
For a double ended single light hood is it best to suck hot air through the tubular end of the light or exhaust across and out the tent?? Thanks for all you do one of the best in the UA-cam world. Thanks for your time and help in this matter. Happy Growing Day, Derek
So what is the perfect temperature and humidity while in veg?
Isn’t this dwc not ebb and flow? I thought ebb was on a tray that gets pumped water soaks up by the Rockwell then drain to a bucket under the tray?
Exactly.. this channel is all weird. Very rookie.
Exhaust fan is in the wrong spot. The fan is sucking air out, and you will get air/smell leaking through where the glass on the lights sit. By putting the exhaust fan right after the carbon filter, your blowing the air out. As the air passes through the light fixtures, any air that escapes will pass back into the room.
Love this set up.
Did you have any problems with leaks and what system fits an 8x4?
@growace can you explain why you have your ducting lead straight back into your tent? Isn't that just recycling the air into the tent?
Shawn I was also under the impression the carbon filter ducting should be exhausted out of the tent ad then a separate fan bringing in fresh air into the tent??
Don't forget, you are most likely going to want to vent the heat out of your room if you are using the HID lighting. Those things get HOT !!!
So the charcoal filter is needed just for cooling the lights?
Is it not best to have cold air intake on the ground?
it is preference, however heat rises so you may want your intake on the ground depending on your temperatures.
GrowAce hi so I was correct then and your wrong ? Why would u vent straight onto the exhaust ?
Again, its all preference and relative to a specific grow. You my already have a cool tent, therefor only needing to cool your hood/light/upper half of your tent.
You might want to check out ceramic metal halide lights. They use half the watts with half the heat and produce the most accurate copy of the sun. I got two Hydrofarm Phantoms. Good for veg and flower. So, you only need one light for the whole process.
Check out our vids on CMH lights
I like the Fugazi sounding bass line.
I remember this was one of the 1st cannabis related videos I ever watched. Cheers 🍻
What size tent does your AirCube Active Oxygen Ebb & Flow Grow System - 36 Site fit into?
I have a 4x4 complete kit wish I had a install video didn’t come with it
Where can I buy those buckets
I both a 96x48x80...Cant wait to get it on monday and start growing!!!!
Do the plants go in the tent or not?
Can I have the link to buy this set up
how do you get rain into rain bucket
Is this tent strong enough to hold a could KIND LED lights?
so oyur big problem is your pulling air through the light before the carbon so if any air leaks in light shades equals bad smells u should have the light on a sepreate air loop to the carbon filter
No oscillating fans??
If you have alot of heat or humidity in your tent , osculating fans would help.
Oscillating fans do not remove hear they circulate the air round more and give the plants a more natural environment replicating wind etc.. also the way the carbon filter has been setup is wrong it should be vented out of the tent not recirculating the same air back in other wise the whole use of the carbon filter is pointless lol hence why it’s called a filter.. the air that is been sucked out of the grow tent should be vented out somewhere to remove odor you should then have a separate fan without a filter sucking in fresh air from an outside grow room source and been brought directly into the top of the tent. Not the bottom as it could chill the pots. And never ever ever ever spray wd40 inside a grow area lol..
videos are simple, clear & concise. like
How many plants does this setup handle? i need a setup for 12 plants would this be right?
Hey sorry to mention i noticed you placed the carbon filter in the corner of the tent, one side of the filter is directly touching a wall would that not compact the filtration? Kind of feel placing the filter in the middle of the room or at least a position were there is 100% uninterrupted air filtration would always be better for the fan and filter and overall exhaust.
Carbon filter takes in air from all sides, so that's no problem, many have there setup like this, mine is abit different tho.
so on the site ...it $1200 is that just for the tent or for everything in the picture???
For that price im sure its everything. The filters and inline exhaust fans are pretty ineffective at stopping smell. Thats why you should build your own grow tent with poles and plastic and spend your money on separate filters and fans.
Step by step, huh? Everyone jumps over the ballast step. Does it go inside the tent or out? What do I set it to?
Why do I feel like your Ryan’s toy review grown up and growing weed
Can someone explain why the end of the ducting just goes back into the tent to make a complete loop?... I thought you would want the duct exhausting somewhere outside the tent or better yet outside the property all together? Their is no fresh air entering with your method as far as I understand only circulating air
You are confusing the two line of ducting. 1 is for sucking out all the hot air. The other is an intake to bring in cool fresh air.
GrowAce How do you filter the air cling in does a filter can go outside the tent connected to a intake fan can you do video on this or have a recommended link? Thanks for your time and help in this matter your videos are very appreciative👍🏻🤪
Nice set up. Time to save my pennies.
No it would be better to have the controller bucket on the outside of the tent
The extra piece of fabric on top is to repair any rips later.
Just became an affiliate hope to grab one of the o2 pot systems soon!
Maybe because I haven't got to the end yet cuz I'm only at the 4 minute and 40 second mark But them rods what kind of flimsy
They are slim and provide some flex, but they are rated for 120 lbs. We test all of our light systems to make sure they will hold.
@@thefirstpancake9806 lol mb if you grab above a post if not they would snap like nothing xd
whats the difference in setting the fan up before the light so it pushes the air through instead of pulling it? which is better? and is an intake fan a must? i have a 5x5 tent getting a 1000w light and im a little confused as to the the ventilation setup. thanks for the advice in advance!
Best practice is ensuring you pull air out of your grow tent instead of pushing it. Here's another video we did that helps explain it. Let me know if it clears things up for you: ua-cam.com/video/6JHBEG1x0n4/v-deo.html
Although pulling air is more efficient than pushing air; Everest Fernandez explains that you should push the air through the lights, so you can prolong the life of your fans. All that heat may be bad for your fans. I am not sure. Just wanted to post another point of view.
Jason Litson what I have since found out is that by installing the fan to suck air thru the filter and push through the air cooled light and out of the tent is that it creates positive pressure which prevents any unfiltered air from getting into the system via any potential air leaks which could cause oder in the exahaust! If that makes sense.
Yes, makes perfect sense, and this is exactly how I planned to set up my system. I changed it though, because in this setup it would be pulling all of my air conditioned air out of the room. So I use one fan pulling air from a closet with a simple AC filter on the inlet, that pushes air through my hood, and then out of the grow area. I use a second fan connected to my carbon filter, but does not exhaust, and also creates a negative pressure. I didn't want to spend the extra money on a second fan, but I also don't want to blow all my cooled air out of the room. In this way my AC kicks on for 1 minute about every 15 minutes or so.
dont cheap out and combine lamp blower and tent vent blower into one. Please. Been there done that. Its the cheap skate route. The PROPER way is to use a blower (s) for the lamps as a SEPERATE closed loop system. The blower for this is hooked to the lamps timer. And use INSULATED ducting...trust me. For your tent ventilation...use its own blower/filter and duct HOOKED TO A COMBO HUMIDISTAT/THERMOSTAT. Again ...trust me. Get off your wallet and do it proper. Been there done that. You dont want moist smelly air passing through a filter and then through your lamps. Its the cheap skate ghetto way. Remember....lamps on thier own SEPERATE blower system (SUCKING OUT). And dont just dump it into the room the tent is in. Actually get rid of it completely. by blowing it outside. Same with tent venting exhaust system. Your gonna have to cut some holes and slap some flanges up somewhere. I replaced one of my basement windown with plywood and use a 6" hole saw bit. Its a must. Do it proper folks...trust me...the first time so your not battling problems in the middle of a crop. Read my post above on how to set it all up the correct way.
Does humidifire or dehumidifire use in growtent
Yes, If you are having trouble regulating your humidity a humidifier can help keep levels balanced.
I always build mine inside the tent i think its far easier.
@Nigel Kent ive got my own strain in at the min i crossed white russian with jack herer. Took me 5 years of backcrossing to get a stable strain with characteristic's of both the mother and father. The jack i used as a mother first go then just kept crossing and back crossing until i was getting similar plants from all the seeds. Ive never had the pleasure of trying star dog but ive heard its a nice strain. Good luck with your crop may the Ganja gods bless your green fingers and give you a bumper crop lol. Do you make any concentrates with your waste? Me and a friend have just invested in a closed loop extraction machine and a vaccum oven and the oil we're getting is 1st class. With our extraction machine it can use either butane or CO2 and we've just used CO2 upto now. Id definitely advise looking into how to process your waste because its surprising how much you can get just from the waste. From waste of 10 plants youre looking at about 25 to 30 grams of oil.
Great Video, looks like a well put together grow package. Keep up the great work. ;)
Dude
how much the cost for same DWC system including everything ?
Electronic Tint التظليل الالكتروني about 35 dollars
When did you attach the floor?
at 7:50
You should hang the ratchets the other way it'll make it a lot easier to pull the lights up
Why are you blowing all that hot air right back into your tent i understand doing it for led because they dont give near the heat hps or mh
Assuming youre in a air conditioned room the intake should be cool air.
How much for the entire set?
Big box man, very nicee place simply incredible this box.
WD 40??? 😨
Alberto MM oh haha yeah cross contamination
Nice for sex 🤣🤣😂
Where is the soil part?
Wait....so the two fans just sit on top of the tent? That doesn't sound like a safe plan...
BTW that spill tray is not water proof they all leak at the stitching
those things around the box usually come with tabs you can just pull so it can come apart. dont really need scissors... as for the tape and bx thats a different story
That is a sweet hydro setup !
Yes it is.
Seems to be an expensive proposition. Will need to find out something far inexpensive.
Door but a expensive kit build it yourself
Link?
Use WD40, should be good for the plants.?lol
@смерть приходит за мной where did you buy your light?
So great product.
You will need more lights for that size tent,, so not enough cross poles in the ceiling to hang them off
Hey, great video, but next time use olive oil or any cooking oil instead of WD-40
It actually seems so easy but time consuming
Pex cutters when cutting tubing
Very helpful, cheers mate
Dummy proof instructions. First 19 minute video i ever watch without skipping🤣
For those of you who setup the ventilation like he did, prepare for your whole house to smell like pot
Add a filter if you are worried about odor.
lmao
He did the fan backwards to where it didn’t suck the stinky air and blow it out of the tent through the filter . Lmfao
Great build video, but the frame itself looks weak and flimsy.
Cant wait to c what he has
I have a hard time believing you can run CMH/ HPS in a grow tent. But I’m seeing it more and more so it must be.
Ehh? I've been doing it years without hoods either. You just need enough CFM
Where does all the smell go
Throws stuff away before reading the instructions, typical male on Christmas morning
can I work for growace
I want to start doing shows and become a icon in the cannabis industry
Great tent
How much 4 the system?
I know it's an old Post but on Amazon you can get the tent and 2 lights with bulbs for around 420 maybe a few dollars more
Hi there
How many lights does the 7ftL 2ftW tent require? For 6 plants? And what watt would the bulbs need to be? I'm just starting out and I've been reading some of the stuff you have been posting. Even where you explain how to work this problem out but am apsalutly rubbish at maths.. could you help me out with my problem please?
Hello,
to start we think 6 plants might be aiming high for that kind of tent, depending on what size you want them to reach. Depending on what king of light you want to run you could have several set ups.
GrowAce thank you for getting back to me! At the moment I only have 1 light with a 600 watt bulb Dutch barn euro reflector. What would you recommend?
HPS? For that particular tent we would recommend 1 to 2 more 600W's
I wanted to buy a few things from their website but for some reason it keeps saying I dont have permission to access their website, but i could before. as if i was banned. that sucks. I was going to spend alot of money.....
sorry to hear your having trouble getting to our page. Maybe try some basic trouble shooting such as a restart or checking your pop/virus blockers.
Why was the carbon attached to the other end of the lights lad? 😂🙈
Smokin_Doobs what do you mean lol?
Lol at the dog 😂
Most tents are usually idiot proof to setup tbh, its like simple lego or kinex.
Had many tents and only had 1 that required you to be a MENSA candidate to setup lol
Someone was smoking crack when they made that one, thing was just a nightmare, eventually got it setup with liek half the box leftover.
THE GROWBOSS
the timer is not suitable for safety, for mh and hps lamps. you should use timer with relay
Thanx for the helpful vid
The Sauce Whisperer fuck off
feels like century ago these things are obsolete...apollo led... mh bulbs with all fans and pipes.... Crazy
6:14 You put it in the hole farther from the timer.
you need 4x600 watt lights for tent that size
You don't hook up the can to your light venting. #fail
good
Sucking through air-cooled hoods always causes smell to be sucked in after the filter. You either need to blow through air-cooled hoods to create a pressure so no smell can get out.
I don't understand why it needs a ventilation system? Plants can generate oxygen by themselves, isn't it?? Also, you can leave the tent opening with a small gap to get fresh air, isn't it. Thank you.
To regulate the temperature
Maybe
Oh no intake duct up high 😔
Hey everyone! Thanks so much for watching our complete grow tent package setup! We started a weekly grow series with this exact setup! Check out our week 1 grow journal here: ua-cam.com/video/vS2XJx5jjxk/v-deo.html
dry and cure cannibus
GrowAce just so you know the link in the description is bad, it says error page not found blablabla, anyways i still got to see the store, thanks keep it up
Should be working now! Thanks for the update.
Is there a dehumidifier with it
And the price is a whopping 10 grand
why wd-40 tho....
Damn yo that's huge that's not a grow tent that's a family size camping tent 😂
the perfect size for a family of plants
Do not purchase anything from this company they are a scam! Here is the email i sent the company! They did the worst to me and robbed me for $350. This was my email to the company that will explain what i went through
Hello Christian or whoever sees this! Growace is the worst company I have ever done any business with. This company should not be in operation with the way you guys treat customers. In January, I spent a total of $4,000 with you guys and it has been a complete disaster. My products took over a month to arrive, and when it did arrive, so many items were missing and I had to keep calling to have these items sent and even after that, it took another 2 weeks to get my oxygen pot commander. When i decided to set it up, nothing worked. I have been trying to get this piece of shit to start for over a month and it has not worked. I called you guys over 30 times in a month, all you guys did was give me a run around every fucking day. After a month with dealing with this, come to find out it was not receiving power. Instead of doing the right thing, you guys instructed me in an email to open the machine with a screw driver and I got electrocuted twice because this piece of shit is cheaply made and whoever put it together, did not plug the wires. How the fuck are you guys selling things that are not safe and properly put together? I am not an electrician and what you guys did was fucked up and I could have loss my life because of this. After carefully installing the wires, the machine finally started but it's not working properly. It fills the pots but it doesn't drain and i did everything correctly. I should not have to deal with this and its fucked up. I have never seen a company like this. I am tired of this and I will not go back and forth anymore for something that is under warranty, its your job to fix this, not my job. Growace is not a professional company at all! Growace is selling products with no instruction manuals and you guys tell people to go on a website to find the manual and the website doesn’t even exists. How are you guys selling products without instructions? On top of that you guys tell me to go look on UA-cam for the instructions and the instructions are not only incomplete but these are instructions for old machines that you guys don’t even sell anymore. At this point, I am fed up with being angry and frustrated and my plants are dying because of this and I am ready to pursue legal action against you guys for pain and suffering if this is not resolved by Monday during business hours.. Not only I will pursue legal actions, I will destroy the reputation of your company by reporting you guys to the Better Business Bureau, take you guys to small claims court, and I will put negative reviews on your website and will open up multiple UA-cam accounts to slender your company and ruin your sales opportunity and find every Growace video on UA-cam and comment on every videos to make sure that no one buys your products. The last company who did this to me almost shut down 7 years ago and had to pay me to remove my videos which ruined their sales.This is the worst experience I have ever had and I feel stupid to believe that because I spent so much money with Growace, they would actually treat me like a human being. Maybe you guys treat me like this because my voice sounds black and you guys are discriminating against me and treating me like a piece of shit.
Do not purchase anything from this company they are a scam! Here is the email i sent the company! They did the worst to me and robbed me for $350. This was my email to the company that will explain what i went through
Hello Christian or whoever sees this! Growace is the worst company I have ever done any business with. This company should not be in operation with the way you guys treat customers. In January, I spent a total of $4,000 with you guys and it has been a complete disaster. My products took over a month to arrive, and when it did arrive, so many items were missing and I had to keep calling to have these items sent and even after that, it took another 2 weeks to get my oxygen pot commander. When i decided to set it up, nothing worked. I have been trying to get this piece of shit to start for over a month and it has not worked. I called you guys over 30 times in a month, all you guys did was give me a run around every fucking day. After a month with dealing with this, come to find out it was not receiving power. Instead of doing the right thing, you guys instructed me in an email to open the machine with a screw driver and I got electrocuted twice because this piece of shit is cheaply made and whoever put it together, did not plug the wires. How the fuck are you guys selling things that are not safe and properly put together? I am not an electrician and what you guys did was fucked up and I could have loss my life because of this. After carefully installing the wires, the machine finally started but it's not working properly. It fills the pots but it doesn't drain and i did everything correctly. I should not have to deal with this and its fucked up. I have never seen a company like this. I am tired of this and I will not go back and forth anymore for something that is under warranty, its your job to fix this, not my job. Growace is not a professional company at all! Growace is selling products with no instruction manuals and you guys tell people to go on a website to find the manual and the website doesn’t even exists. How are you guys selling products without instructions? On top of that you guys tell me to go look on UA-cam for the instructions and the instructions are not only incomplete but these are instructions for old machines that you guys don’t even sell anymore. At this point, I am fed up with being angry and frustrated and my plants are dying because of this and I am ready to pursue legal action against you guys for pain and suffering if this is not resolved by Monday during business hours.. Not only I will pursue legal actions, I will destroy the reputation of your company by reporting you guys to the Better Business Bureau, take you guys to small claims court, and I will put negative reviews on your website and will open up multiple UA-cam accounts to slender your company and ruin your sales opportunity and find every Growace video on UA-cam and comment on every videos to make sure that no one buys your products. The last company who did this to me almost shut down 7 years ago and had to pay me to remove my videos which ruined their sales.This is the worst experience I have ever had and I feel stupid to believe that because I spent so much money with Growace, they would actually treat me like a human being. Maybe you guys treat me like this because my voice sounds black and you guys are discriminating against me and treating me like a piece of shit.
With fans that big could get away without the cool tubes
Nice
Was kann man komplizierter machen, als nötig?
Siehe Dieses Video 😂😂
I knew you were winging it when I saw you put your intake air at the top of the tent lol rookie
imSICKkid hey bro any video that explains better??
The air coming in wont chill the pots if it comes in at the top, especially if the air is coming from outside
@AA Sharp cold air falls.....but not when you have an exhaust fan running right next to the intake air.
6.5?? All I’m learning is this dude short short