This video saved my ass, I wasn't sure how to do a couple things from the installation guide (especially the electronics, first time using water cooling or RGB in my build!) & your video helped out tremendously. Thanks!
Do the cooling fans not require us to add any additional liquids I assume ? Just good to go as soon as they’re plugged in? Sorry if this is kind of a dumb question. It’s my first pc build 🥺
I’m confused on a couple things… do the aio fans connect to the cpu fan header? Also how does the pump power work? Does it have to plug into the motherboard? Edit: so I see the power to sata (I think). Does the aio come with that?
This set up has the pump logo upside down because of right side top mount position and still works in that position . You can choose to have it at correct logo position but I chose this bcoz I dont want too much curve and stress on my tubings. Timelapse on the full PC Build here Featuring Ryzen 5 3600 and MSI GTX 1650 super ---> ua-cam.com/video/BTZAbihBVTw/v-deo.html
@@lawrencesoneja3273 d ko na try na correct logo position yung pump para ma compare pero until now ok pa naman yung temp ng cpu ko, much lower compared nung stock cooler pa gamit ko
astroalvinph question lang po.. kakabili ko din nito earlier kaso lang wlang pinagbago sa temp ko pra lumaki yung temp slight. Idk kung bakit sana matulungan nyo po ako. Salamat!
I just hooked this up today and really don’t feel cold air being blown out of the fans. I thought it would blow out extreme cold weather when I boot it up, seems like it’s barely blowing air into my pc.
Thanks for making this video, i really need the help, just realized my graphics card is unable to fit in my pc because of the coolers orientation(currently on the right side intending to fit it like yours). Do you have any idea if a gigabyte B550M motherboard has an Argb ? My friend built this computer for me and I did not use a remote but managed to control lighting using an app .. and I might be asking for help often if i faced any troubles this week when i start to dismantle everything please save me 😭
sir i have gigabyte c200 glass then an aorus x470 motherboard then auraflow 240x with 4 darkflas dr12 fans how will it connect all rgb in one please help me
hey man im thinking of purchasing this for my setup im running a 1600af and b450m steel legend with the hopes of planning to get a 4000d airflow, and i have fans. what are the temps like, can i get a stable 4ghz under 80 degress at all time and could it handle a ryzen 7 or 9 if i upgrade. Nice vid and instructions keep it up, also are there any cooling, or performance wise between the auraflow, zoomflow and frostflow or just aesthetics. Keep it up
Im running a Ryzen 5 3600.. stock cooler was at 70-80c and with this Zoomflow it now stays at 50c and I'm at a tropical country.. I dont over clock though.. (others report they are at 40sh degrees with zoomflow) For the models, I believe it's just aesthetics, but they do have 240x and 360x versions for each model (2 vs 3 fans)
I tried the argb hub converter but sometimes the light flickers and I cant control the light intensity.. so i stick with the rf receiver and controller
I havent tried the deepcool converter, what I tried was the GamerStorm rgb converter and was able to sync all the lights but the syncing capability isn't that smooth and I cant control the brightness on the software so I stayed with the remote control
Hi , i need help on this . Im using the same case as yours . Also just bought zoomflow 240x and my mobo is b450m steel legend . What should i do if i want the exact same lighting flow as yours? I mean like the original fan from the case itself is rainbow , how do i change it as your lighting setup which is change simultaneously? Next question is , where to get that remote with all those additional cable ? I mean like it’s not came together with the AIo cooler right? Do reply cuz i really need fully guidance on this . Thanks !
If you really want the same lighting as mine, you need to buy also the DF-12025 ARB Trio from ID-Cooling.. this trio fan pack is the one that comes with a remote.. that eventually makes you control all the ARGB lighting You mentioned you have the steel legend mobo, I think that one has argb header.. you can just connect your argb splitter from your ARB lights to that mobo directly, no need for the remote receiver and remote.. though as I mentioned in the video, I would still prefer the remote even if I have ARGB mobo
@@astroalvinph8630 hiiii ! so which mean if i wanted to control the lighting by remote controller , i have to follow the steps exactly like yours? If i’m wrong , do correct me 🙏🏻 . I just confused about those wiring thingy 😭
@@astroalvinph8630 and sorry i forgot to ask one last question . I bought the same fan ID cooling DF-12025- argb trio fans . I bought it online and yes it included the 3 pin to sata controller but the seller unfortunately dont include me the rf remote controller . Very bad seller smh 🤦🏻♂️. So i decided to buy the rf remote itself with the cable of 3pin to 4pins connector and not the 3pin to SATA. In my situation , how am i going to work on your setup with those cable i bought? Major question is ... Isit possible to use the existing 3pin to sata cable inside the id cooling fans box with the additional rf remote controller that I just bought with another seller as i mentioned above ? Does the remote can detect ? Or just to use the remote controller that i’ve just bought that came with the 3pin to 4pin connector ? If this still working then there’s not a big deal already. Sorry for asking a long questions and promise this will be the last one 🙏🏻🙏🏻🙏🏻 . Thank you so much for replying !
@@safwanasdasd zoomflow's ARGB connectors are 3 pin and also the splitter.. connect the argb connectors to the splitter and connect the splitter directly to the ARGB header of the motherboard as the Steel legend is ARGB capable.. no need for the remote if you are having problems with it.. Download the ASROCK polychrome driver for your steel legend to control the lighting effects
sir nag install ako ng zoomflow 240xt, lights are working and nagvivibrate naman yung pump nung hinawakan ko pero yung idle temp ko s around 60c pa din. normal ba to?
It's exhaust.. Fans are blowing to the radiator to cool it so warm air goes up, maybe you were confused with the radiator fans having stickers on it while my other exhaust fan has none
@@karlhilp1072 both sides have stickers with the aio fan though a bit different.. the more notable difference of sides is the swastika-like plastic frame of the side where the air leaves.. just take note of this side with plastic frame - it is the blowing side.. normally top mount is exhaust orientation
@@aidilmukhrlis4080 not necessarily, in the last part of the video I mentioned there you can use the push button controller that comes with the aio set
Hello thank you for this video btw Im about to build my 1st pc and I already ordered the id cooling argb fans. My question is would it sync with the other argb aio specifically the Darkflash twister dx240?🤔. Again thank you very much for this video. new subscriber here 🙌
if your mobo has argb header, all of the argb lights connected to your mobo should sync with a software like msi mystic light or asus aura sync.. if you go by the remote route, (I haven't tried connecting a different brand of aio with my id cooling trio fan) I would guess it should sync as long as you connect them to single line to the receiver
Bro a question. Kaka order ko lang ng same cooler at case fans. May splitter na kasama sya right? Yung splitters may 3 headers tas yung fans 4 pin hole. Gagana parin ba mga fans sa ganong spliiters ?
yung splitters is para ma group yung headers ng connectors para isa na lang sila.. fans have the same pin holes.. rgb and argb ang magkaiba ang pin holes.. sorry kinda late
If you have an ARGB capable mobo, you can sync them with your mobo's software.. for RGB only motherboard, you will need an RGB to ARGB converter hub as RGB has 4 pin header with 12v and ARGB uses 3 pin 5v
I always prefer top mount just for the aesthetic looks.. but if your GPU generates alot of heat or you are a heavy gamer, I would say side so the exhaust fan at top will move the warm air out faster
Hello sir! May concern lang po regarding sa screws ng idcooling df 12025, talaga bang matigas sya iscrew sa case? Sakin kasi parang masisira na sa sobrang tigas. Thank you!!
Di ko kasi ma sync sa akin parehas tayo ng board yung aio ko zoomflow din pero yung mga fans ko is yung inplay lang na cooling fans.. ask ko lang po kung pwedi ba cla mag sync ty.
sir 2 po yung argb header ko. lahat po ba ng fans and yung cooler pag connect connect ko lang lahat tas lagay ko lang sa iasng header? + argb din yung front panel ko. pag gabit gabit ko lang sila sa isang header?
magdedepende po kung gusto mong gumamit ng remote.. kung remote, need mo connect lahat into one para sa receiver.. pero kung gusto mo sa PC mo icontrol ang lights you can use the splitters to gather all the fan connectors tapos connect mo yung splitter sa argb header ng motherboard mo
hi sir its me again, just want to ask, is it still possible to add one more fan, my case is rakk haliya and ung front fan ay kulang to fill the front if yes paano kya po? again thanks sa reply po.
@@ryzgaming7895 ah kung etong liquid cooler, merong controller ito pero manual nga lang, sset mo muna ano gusto mong kulay bago mo ibalik yung cover ng system unit
Zoomflow has the ARGB lighting.. where there's a mix of colors in one mode like rainbow but you can still choose one color at time if you like.. Auraflow has RGB only, just one color per mode no mixes.. ARGB has 3 pins and is 5v and RGB has 4 and is 12v
separate sya idol sa mobo.. wala kasing ARGB header mobo ko.. synced ang aio at fans through the RF receiver and controlled sya with the remote.. nasa bandang huli boss ang explanation
Yes.. Just plug either the power cable connector or the rgb header. It doesn't seem to work if both header and power cable are plugged/connected to the system. (In my set up, only the power cable is connected to the PSU, the rgb header is just hanging/not connected to anything)
This video saved my ass, I wasn't sure how to do a couple things from the installation guide (especially the electronics, first time using water cooling or RGB in my build!) & your video helped out tremendously. Thanks!
buti nahanap ko 'tong video mo. ito mismo plano ko eh thank you sir! malaking tulong to.
walang anuman din sir 👍
@@astroalvinph8630 sir kapag may ARGB header yung motherboard lahat ng headers sa mobo icoconnect no sir?
yung pump nalang icoconnect sa sata?
Do the cooling fans not require us to add any additional liquids I assume ? Just good to go as soon as they’re plugged in? Sorry if this is kind of a dumb question. It’s my first pc build 🥺
its plug and play.. no worries, I had so many dumb questions too when I started this build
I’m confused on a couple things… do the aio fans connect to the cpu fan header? Also how does the pump power work? Does it have to plug into the motherboard?
Edit: so I see the power to sata (I think). Does the aio come with that?
Really useful video! Thanks a lot.
This set up has the pump logo upside down because of right side top mount position and still works in that position . You can choose to have it at correct logo position but I chose this bcoz I dont want too much curve and stress on my tubings. Timelapse on the full PC Build here Featuring Ryzen 5 3600 and MSI GTX 1650 super ---> ua-cam.com/video/BTZAbihBVTw/v-deo.html
same setup tayo sir. question ko lang, wala naman siyang epekto sa flow sa cpu?
@@lawrencesoneja3273 d ko na try na correct logo position yung pump para ma compare pero until now ok pa naman yung temp ng cpu ko, much lower compared nung stock cooler pa gamit ko
astroalvinph question lang po.. kakabili ko din nito earlier kaso lang wlang pinagbago sa temp ko pra lumaki yung temp slight. Idk kung bakit sana matulungan nyo po ako. Salamat!
@@kejayvergara432 pano po yung orientation ng cooler nyo? same ba ng sakin?
@@astroalvinph8630 yes po same po nang pagkaset up sa inyo.
I just hooked this up today and really don’t feel cold air being blown out of the fans. I thought it would blow out extreme cold weather when I boot it up, seems like it’s barely blowing air into my pc.
What splitter did you use to connect separate fans together
Do the splitters come with your aio or will I need to buy a separate pack?
the aio has splitters that comes with it.. no need to buy separately
@@astroalvinph8630 great! Thanks
Very helpful video. Helped me a lot. Thank you so much!
Hey man, tell me pls is this ok that u installed a backplate right over the solder here 2:28 ?
I have a question, could i use any rgb fans with the id-cooling?
Yeah you could with any 120mm fans
@@iMidnight_ thank you 😊
Yes! i’m using
thank you po, question lang ilang splitter ba ang included sa aio? at pwedi ba white color lang e set mo sa aio zoomflow po?
Does your motherboard need to have argb headers or can u do I with only regular rgb headers?
My motherboard has 2 x RGB LED Headers and 2 x Addressable LED Headers will it work?
NOOOOOO, it's probably too late now but NOOOOOO
Thanks for making this video, i really need the help, just realized my graphics card is unable to fit in my pc because of the coolers orientation(currently on the right side intending to fit it like yours). Do you have any idea if a gigabyte B550M motherboard has an Argb ? My friend built this computer for me and I did not use a remote but managed to control lighting using an app .. and I might be asking for help often if i faced any troubles this week when i start to dismantle everything please save me 😭
what specific model is your b550m? I believe aorus has argb headers.. it usually has label on the motherboard but they are tiny letters though
sir i have gigabyte c200 glass then an aorus x470 motherboard then auraflow 240x with 4 darkflas dr12 fans how will it connect all rgb in one please help me
Hi bro i need help, can i use the system fan header for the pump
hey man im thinking of purchasing this for my setup im running a 1600af and b450m steel legend with the hopes of planning to get a 4000d airflow, and i have fans. what are the temps like, can i get a stable 4ghz under 80 degress at all time and could it handle a ryzen 7 or 9 if i upgrade. Nice vid and instructions keep it up, also are there any cooling, or performance wise between the auraflow, zoomflow and frostflow or just aesthetics. Keep it up
Im running a Ryzen 5 3600.. stock cooler was at 70-80c and with this Zoomflow it now stays at 50c and I'm at a tropical country.. I dont over clock though.. (others report they are at 40sh degrees with zoomflow) For the models, I believe it's just aesthetics, but they do have 240x and 360x versions for each model (2 vs 3 fans)
@@astroalvinph8630 ight cheers ima see if i can get one cheap at bf
is it okay to put them to a Hub with controller? or splitter is needed for them to be connected? thanks!
I tried the argb hub converter but sometimes the light flickers and I cant control the light intensity.. so i stick with the rf receiver and controller
Does this work if I do not use the fans in the trio pack? I only want the RF receiver and remote from it and use it for the 240mm radiator fans
what coolent shoud i use for it ? does it matter
Thank you so much
So I need to buy an extra splitter?
love the diagram, can I use deepcool RGB converter instead of RF control receiver so I can sync it to the motherboard?
I havent tried the deepcool converter, what I tried was the GamerStorm rgb converter and was able to sync all the lights but the syncing capability isn't that smooth and I cant control the brightness on the software so I stayed with the remote control
Hey bro,is a good ideea to put frostflow 240x in Ryzen 5 3600?(and can you tell me you temps and processor?)
Im using ryzen 5 3600.. idle 40-45c.. gaming 55-60c (im in tropical country)
Did you put the 3 connector header adapter in the cpu_fan or the system_fan?
i have the same AIO, how tight did you screw the pump head on the cpu?
Hi , i need help on this . Im using the same case as yours . Also just bought zoomflow 240x and my mobo is b450m steel legend . What should i do if i want the exact same lighting flow as yours? I mean like the original fan from the case itself is rainbow , how do i change it as your lighting setup which is change simultaneously?
Next question is , where to get that remote with all those additional cable ? I mean like it’s not came together with the AIo cooler right? Do reply cuz i really need fully guidance on this . Thanks !
If you really want the same lighting as mine, you need to buy also the DF-12025 ARB Trio from ID-Cooling.. this trio fan pack is the one that comes with a remote.. that eventually makes you control all the ARGB lighting
You mentioned you have the steel legend mobo, I think that one has argb header.. you can just connect your argb splitter from your ARB lights to that mobo directly, no need for the remote receiver and remote.. though as I mentioned in the video, I would still prefer the remote even if I have ARGB mobo
@@astroalvinph8630 hiiii ! so which mean if i wanted to control the lighting by remote controller , i have to follow the steps exactly like yours? If i’m wrong , do correct me 🙏🏻 . I just confused about those wiring thingy 😭
@@safwanasdasd Yes.. It is confusing really at first that's why I made this video coz I can't find it on other guides
@@astroalvinph8630 and sorry i forgot to ask one last question . I bought the same fan ID cooling DF-12025- argb trio fans . I bought it online and yes it included the 3 pin to sata controller but the seller unfortunately dont include me the rf remote controller . Very bad seller smh 🤦🏻♂️. So i decided to buy the rf remote itself with the cable of 3pin to 4pins connector and not the 3pin to SATA. In my situation , how am i going to work on your setup with those cable i bought?
Major question is ... Isit possible to use the existing 3pin to sata cable inside the id cooling fans box with the additional rf remote controller that I just bought with another seller as i mentioned above ?
Does the remote can detect ? Or just to use the remote controller that i’ve just bought that came with the 3pin to 4pin connector ? If this still working then there’s not a big deal already.
Sorry for asking a long questions and promise this will be the last one 🙏🏻🙏🏻🙏🏻 . Thank you so much for replying !
@@safwanasdasd zoomflow's ARGB connectors are 3 pin and also the splitter.. connect the argb connectors to the splitter and connect the splitter directly to the ARGB header of the motherboard as the Steel legend is ARGB capable.. no need for the remote if you are having problems with it.. Download the ASROCK polychrome driver for your steel legend to control the lighting effects
Outstanding. You helped a lot. Thank you
If you want to add another argb fan, do you need to also add another splitter for that additonal fan?
Will this work with AM5 motherboards?
thanks sir..help me alot..👍👍👍
is the zoomflow good? i have read some reviews and they said that is very loud and the temps are not good.
For the price 10/10 otherwise I’d say a 6 or a 7
Does it mean if i dont have rgb splitter means my fan wont have any lights?
Just got subscribed to your channel. Whats the difference between auraflow and zoomflow po? Thank you
auraflow is RGB, one color at a time lang ang lights.. while zoomflow is ARGB.. pwede yung mala rainbow.. 2 or 3 mixes of color options
Hi my mobo does not have rgb nor argb pins. Will it work ?
Thanks for this !!!
sir nag install ako ng zoomflow 240xt, lights are working and nagvivibrate naman yung pump nung hinawakan ko pero yung idle temp ko s around 60c pa din. normal ba to?
What case is this ? AND WHERE DID YOU BUY THAT DESKMAT
Hey didn't you installed the fans on the radiator as intake rather than exhaust? Please let me know because I am sure you installed the fans as pull.
It's exhaust.. Fans are blowing to the radiator to cool it so warm air goes up, maybe you were confused with the radiator fans having stickers on it while my other exhaust fan has none
@@astroalvinph8630 Oh ok. Thanks for letting me know. Yeah it was the stickers which are indeed facing that way instead of facing backwards.
@@astroalvinph8630 So just to make sure, with this aio, when the fans stickers are facing the right way, then that is when they will work as exhaust?
@@karlhilp1072 both sides have stickers with the aio fan though a bit different.. the more notable difference of sides is the swastika-like plastic frame of the side where the air leaves.. just take note of this side with plastic frame - it is the blowing side.. normally top mount is exhaust orientation
Where to connect AIO pump power? SATA or CPU_fan??
there's a specific connector for the pump, I connected it to SATA
So the way you have the radiator is blowing air out, or blowing air in?
And I must please ask that you maybe can educate me on what the intake and exhaust side is on these fans.
Is this compatible with my MSI b450m Mortar Max motherboard? It only has 4 pin RGB connectors and not 3 pin.
Yes, the mobo im using has no argb header too
@@astroalvinph8630 so do i still need to buy extra thing to connect tu non-argb mobo?
@@aidilmukhrlis4080 not necessarily, in the last part of the video I mentioned there you can use the push button controller that comes with the aio set
Hello thank you for this video btw Im about to build my 1st pc and I already ordered the id cooling argb fans. My question is would it sync with the other argb aio specifically the Darkflash twister dx240?🤔. Again thank you very much for this video. new subscriber here 🙌
if your mobo has argb header, all of the argb lights connected to your mobo should sync with a software like msi mystic light or asus aura sync.. if you go by the remote route, (I haven't tried connecting a different brand of aio with my id cooling trio fan) I would guess it should sync as long as you connect them to single line to the receiver
hello, when u set the RGB to white colour then u reboot the pc is it stays on white colour or it goes back to default RGB ?
it stays.. Lights remain on what color you have set before you turn off your PC
@@astroalvinph8630 alright thank you so much 🥳🥳🥳
So mine didn’t come with a controller…what do I do then
Okay lang ba if un hose eh halos naka baba? Yun sayo nasa left side hirap ako mabago hehe
Bro a question. Kaka order ko lang ng same cooler at case fans. May splitter na kasama sya right? Yung splitters may 3 headers tas yung fans 4 pin hole. Gagana parin ba mga fans sa ganong spliiters ?
yung splitters is para ma group yung headers ng connectors para isa na lang sila.. fans have the same pin holes.. rgb and argb ang magkaiba ang pin holes.. sorry kinda late
I have questions.. How we to synchronise mobo and id cooling? I mean rgb light
If you have an ARGB capable mobo, you can sync them with your mobo's software.. for RGB only motherboard, you will need an RGB to ARGB converter hub as RGB has 4 pin header with 12v and ARGB uses 3 pin 5v
So now u using remote to control the light not software?
@@hyemchannel4643 For the aio cooling and fans Yes.. but for the ram ang motherboard light I control them with software
@@astroalvinph8630 yeah same with me..
Awesome
question i have tecware vxr case. where should I put the rad? upper part or side?
I always prefer top mount just for the aesthetic looks.. but if your GPU generates alot of heat or you are a heavy gamer, I would say side so the exhaust fan at top will move the warm air out faster
@@astroalvinph8630 thank u sir. subbed 👍
my remote gone, how to setup the rgb fan without remote?
cual es mejor, este o masterluqid 240 v2
Hello sir! May concern lang po regarding sa screws ng idcooling df 12025, talaga bang matigas sya iscrew sa case? Sakin kasi parang masisira na sa sobrang tigas. Thank you!!
Sa pagkakaalala ko yung sa fans ang medyo matigas.. be sure na straight lang pagkakapasok ng screw
What case is this?
nice video, hows ur mobo po sir? supported ba ng mobo gen 3 and future ryzen generation?
I'm using a Ryzen 5 3600 with my b450m now.. Ive heard b450 will support 5000 series with an update
Hi sir so bumili ako nito zoomflow 240x pero walang controller, pano ko iibahin kulay ng rgb?
hi bro, does this product come with thermal paste?
Yes it has
What are the other fans u have and what are the fans on the aio?
Those are ID-Cooling fans
Do you need to change the liquid in an AIO?
most AIOs are sealed alphacool eisbaer and another have fill ports maybe ek?
Can you provide the links for what type of splitter you used? Thankie!
the splitter comes with the set.. bought the set of liquid cooling and fans at shopee online store
can i connect the pump to cpu_fan2 (3pin)
There should be a dedicated header for a pump but it shouldn't be a 3 pin it should be a 4 pin to connect the pump
hindi ako makakapag aura sync if sa psu ako nag connect imbes na mobo, tama ba?
Di ko kasi ma sync sa akin parehas tayo ng board yung aio ko zoomflow din pero yung mga fans ko is yung inplay lang na cooling fans.. ask ko lang po kung pwedi ba cla mag sync ty.
meron akong asus tuf gaming b450m-plus, pano ko po iconnect sa mobo pang aura sync?
thanks!
Casing name ?
Did you use cpu fan socket
nope... it will be left empty there, you need to disable it in BIOS though upon starting
Mine didn’t come with the amd backplate
They 100% stopped shipping them with the backplates because I bought two and they were not in box
sir 2 po yung argb header ko. lahat po ba ng fans and yung cooler pag connect connect ko lang lahat tas lagay ko lang sa iasng header? + argb din yung front panel ko. pag gabit gabit ko lang sila sa isang header?
magdedepende po kung gusto mong gumamit ng remote.. kung remote, need mo connect lahat into one para sa receiver.. pero kung gusto mo sa PC mo icontrol ang lights you can use the splitters to gather all the fan connectors tapos connect mo yung splitter sa argb header ng motherboard mo
Ok na sir! Thank you po sa info and the vid! Lalo na yung schematic diagram! Really helped! 💯
sir ano mas ok? Intake harap, exhaust yung rad and yung likod or intake harap and yung rad tapos exhaust yung likod?
ano case mo?
Hi we have the same MOBO po pwede PO ba I control ung lighting gamit ung parang kasama ng internal hub ba yun?
Im not sure kung anong internal hub ang tinutukoy mo, yung sa ID cooling mismo ba na controller?
Sir saan po ba pwedeng mka bili ng rf control receiver and remote pra sa argb fans? Same po tayo ng fans pro walang remote and receiver. Salamat po
d ko lang alam pero kasama yan sa set ng argb fans mismo
how would you control the fan speed for the AIO tho?
i know I'm quite randomly asking but does anybody know of a good website to watch newly released movies online?
@@kysondarren460 fmovies
Fan case name pls ?
mine failed after 18 months I'll post how they deal with the warranty, amazing service, replaced within 11 days
Sir diba 3 pin ang pump nito? May iba pa bang way para magamit ko to kasi balak ko bumili kaso walang pump header ang mobo ko
yung power ng pump kinoconnect sya rekta sa SATA ng power supply
It says on amazon you can only use white led
hi sir its me again, just want to ask, is it still possible to add one more fan, my case is rakk haliya and ung front fan ay kulang to fill the front
if yes paano kya po? again thanks sa reply po.
same mobo? pwede kang gumamit ng splitter sa fans.. parang octopus wiring kung baga
On exporting videos sir ano temp nya?
d ko pa nacheck while exporting videos.. stress test 75c.. normal usage 50s.. idle 40s
@@astroalvinph8630 ty
can you provide the link from where you buy this item?
Sir, magkakasiya kaya aio using an msi b450 tomahawk max on a Rakk Haliya?
280mm top ang description ng haliya.. kasya yan
What is your cass sir?
It's the DLM23 by darkflash
Hi naka TUF B450m pro gaming din ako ask ko lang po pano ko po ma chchamge ang lights if wala pong RF WIRELESS controller po? Need help po ty
and ano din po fans niyo? Planning to get it din
Pwede mo ma change gamit ang ASUS Armoury Crate software.. maddownload mo sya sa MOBO software ng tuf b450m
@@ryzgaming7895 id cooling df 12025 argb snow.. you can check also my pinned comment for the full build
@@astroalvinph8630 diba sir hindi siya ma sysync? Kasi walang argb header MOBO natin? Same mobo po kasi ako pero walang rf wireless controller
@@ryzgaming7895 ah kung etong liquid cooler, merong controller ito pero manual nga lang, sset mo muna ano gusto mong kulay bago mo ibalik yung cover ng system unit
what's the difference between the zoomflow and the auraflow?
Zoomflow has the ARGB lighting.. where there's a mix of colors in one mode like rainbow but you can still choose one color at time if you like.. Auraflow has RGB only, just one color per mode no mixes.. ARGB has 3 pins and is 5v and RGB has 4 and is 12v
@@astroalvinph8630 thanks!
pila nagatos nimu sa set tanan bai? plan to build sa december inig sale sa shape ug lazada haha
around 45k guro ato bai system unit pa lang daan.. mahal2 kay ECQ ko ani nagbuild lisod pangita sa akong nauyunan na parts
Boss paano mo na sync yung aio at lahat ng fans sa motherboard?
separate sya idol sa mobo.. wala kasing ARGB header mobo ko.. synced ang aio at fans through the RF receiver and controlled sya with the remote.. nasa bandang huli boss ang explanation
@@astroalvinph8630 ok boss thanks
casing?
Darkflash dlm23
what if walng RGB connector sa Mobo ko how ill i control the lighting effects?
meron siyang kasamang controller sa package sir, rekta mo siya icoconnect gamit SATA papuntang PSU
How do i control the lighting
It depends with the type of your MOBO and if you have remote control like mine bcoz of the trio fan pack fans
@@astroalvinph8630 I got the double fan model and I got a ASUS b450-ma
the cable is harder to undertsnad than maths
They send me the wrong back plate
Kuya tabang sa mga Connections bi huhu Auraflow 360 tas 5 fans Sa series huhu
Subscribed! Bro paturo naman mag change fans hahaha bibili ako sana id cooling argb df 12025
Sir saan ko po isasaksak yung pump kung walang pump header mobo ko?
yung power ng pump sa is sa SATA yun boss icoconnect.. aio cooling pump --> aio cooling pump connector --> SATA header from power supply
@@astroalvinph8630 pwede kaya siya if molex, hindi sa sata?
@@brylle7560 sa pagkaka alala ko pang SATA yung connector ng pump
Sir ung sakin parang sira ung remote ok naman nasunod ko lahat
Or baka mai mali? Matx rn sakin ang sikip haha
check mo remote battery if may nakaharang na plastic baka ndi pa natanggal or battery ng remote mismo may prob
goods lang pala maganda
Sir pwede ask link ng seller hehe ty sa review
huangjunzhao3.ph name ng shop pero d ko ma access now d ko lang alam bakit
The most obnoxious music omg
Not at all effective for Intel CPUs.
GARBAGE pieces of plastics
Sir are you using DLM23? How did you light up the front panel lights? Mine is not lighting up. Help pls
Yes.. Just plug either the power cable connector or the rgb header. It doesn't seem to work if both header and power cable are plugged/connected to the system. (In my set up, only the power cable is connected to the PSU, the rgb header is just hanging/not connected to anything)