Quest 3 PCVR Setup Guide - Meta Link (Wired Cable)
Вставка
- Опубліковано 1 чер 2024
- Quest 3 PCVR setup guide for beginners Meta Link. Best settings for Oculus Debug tool.
Meta Link Software - www.meta.com/gb/quest/setup/
Meta Link Requirements - www.meta.com/en-gb/help/quest...
OpenXR Toolkit - • OpenXR Toolkit - Setup...
Amazon.co.uk (UK) Affiliate links
amzn.to/3ZDTIJH - Quest 3 128GB
amzn.to/3PGgfRE - Quest 3 512GB
amzn.to/45TPxLp - Kuject Link Cable
0:00 Hardware Selection
4:25 Software Install & Cable Testing
6:40 Resolution and Refresh Rate Settings
8:00 Oculus Debug Tool Settings
12:36 Launching Games
13:40 SteamVR Settings
14:40 OpenXR Toolkit Summary
#quest3 #VR - Ігри
I'm a beginner. owning Quest 3 for a few days and your video made it clear for me. Thank you!
Amazing video brotha! Clear and easy to follow. Best video on the subject 100%!
so it all started with installing a custom (bloat free) os then after realizing i still needed more performance i started one by one turning all of my services off until i got them around 90 at startup . thank you your video was the last step i was missing to achieve maximum power from my ageing rtx 3070. ac has never looked more beautiful.
I wanted to thank you for getting me set up for my first VR flight on MSFS. It was amazing! I had flown on the PC before but the VR took it to new heights.
My condolences. for the additional money you may be about to spend on future Sim gear, now that you have VR 😁👍
@@HamVR Hello friends, i have a 2080TI do you think it would be able to run MS2020 in Quest 3?
I'm thinking of purchasing the Quest 3, but not much piont if my 2080TI won't do it.
@@HamVR hello. I intend to get the kuject cable as well. I had horrendous time playing Euro Truck Sim using Air Link. But I’m wondering if my hardware is good enough. Ryzen 5 5500. 16GB DDR4, RTX 3050.
@@maydaygoingdown5602 it’s been 3 months , so you probably took a decision already , but it depends on your settings.
My 4090 wich is many times more powerful struggles to run ms 2020 on Vr at a crisp resolution with all settings completely maxed out above 80fps
And even if it does, my 5800X3D wich is equivalent to - Ryzen 7700X and veery slightly below an i5 13500K, wich is a great next gen processor , and it gets dpi bottlencekc at about 60 fps some times.
It really is a hard game to run if you push it.
However it does have quite configurable settings , if you play at a lower resolution with low terrain LOD and low texture load distances etc. you should be able to handle it fine with a 2089 and a normal CPU
For people that start to have audio issues over ~600 Mbps, try turning off the audio from the quest 3 and get the audio from headphones connected to the PC separately instead (say with bluetooth). This worked for me, allowed me to crank the bit rate beyond 600!
So are you saying to use headphones instead?
@@AV3NGED7FOLD yes but don’t connect them to the Quest, connect them to the PC
They did not include $2 worth of parts to make displayport work over usb-c protocol so they could sell you that $80 cable... that requires janky software and extra load/latency on the gpu...
It's a crime to pc gamers for sure
Maybe it will be on Quest 4 or past generations
Absolutely....
What do u mean ? If i link my quest 3 to my laptop in usb C port this is why i have stuttering and lags ? (Even if it recognizes the cable)
If i plug my quest 3 into the usb-3 port, it will work better ?
They actually included the parts.......the quest 3 suports display port.......but meta decided to not enable ut through sowftare
Great advice on the storage size for pcvr use 💚 Also appreciate the info on cable reliability
I've been using an Odyssey+ for years, but just ordered my Q3 yesterday, should arrive in time for the weekend. This information is quite valuable, thanks!
Hope you enjoy it! Thanks for watching.
the way to bypass the 500 mbps limit is amazing, it finally solved my artifacting issues, thank you very much good sir!
have you noticed performance issues when going over 500? i tried setting it to 800 and was having frame drops but i dont know if it was that or another setting i changed
@@eternalglow6483 930 is the limit anything over it causes lag and frame drop
@@eternalglow6483had the same issues, figured out a potential solution. Try muting the audio from the quest 3 and get the audio from the PC separately say through a Bluetooth headset or something. Worked for me with a MX4 connected directly to my PC via Bluetooth.
Great video. Very detailed and easy to follow with some great tips
Glad it was helpful!
one of the most helpful videos on this topic.. thank you
THANK YOU for the USB tip, I was having crazy frame drop issues anytime I was wired and now they're gone
Thanks for this, very helpful indeed!
This is really useful - thanks for making this
finally.. someone who talks sense.. and doesnt grandstand.. weather this works or not.. i appreciate your style.. Im running a 4060.. 13700f 64 gb of ram.. and still getting ridiculous stutter in pcvr
Thank you. This is the info I needed.
Awesome, thanks! So cable link gives you better overall performance compared ti air link, correct?
Thanks for the video some great tips. Just to share in the hope it helps others, I have a Wifi 6e router in my man cave (linked to main router in hallway via LAN over power) and run steam link. it's so easy to setup it's a real joy. Still get the occasional glitch but it is more than tolerable (can even run 120 FPS) and seems to get better over time. Other options to charge at the same time is the KKCOBVR A2.
Great vid - I’ve been messing with VDXR and Oculus link and come to same conclusion - link is still best and the other benefit is ASW much better than SSW (VD) for MSFS
Seems pretty straightforward and plug and play!
Very useful, thanks mate.
Thanks for the video, really great tips! I got a cable with an extra usb one can use as power supply and it pretty much maintains the headset power where it was. I was reluctant to get a quest3 due to my pc being somewhat outdated now (i9-9900k, geforce 2080 super), but for the price I thought I'd give it a try. I was a bit skeptical because of the latency, too, but it runs reasonably well at 72hz and the latency is almost unnoticeable :D
amazing video, you nailed it!
Great video, thank you.
I got the exact same problem with the usb (amd vs Intel). Your workaround worked perfectly! Thanks!!
Great to hear! It's was driving me nuts. Watch out for Windows updates, as they can sometimes reset that setting.
I use a OC 3060 12GB for Automobilista 2 and Half Life Alyx, thru a wired Pico4. The performance is pretty decent! Playable framerates with turned down graphic settings but still good looking.
That's good to know. AMS2 and HLF are pretty well optimised for VR. Assetto Corsa Competizione is much more demanding on the other hand.
Try dcs ans see your frames dropping like dominos
usefull video for beginners and what about encode bandwith in debug tools ? do you change it sometimes ?
Superb guide
really cool. thx alot
Thanks for this video
Great video. Subscribed.
I’ve just updated my rig from a Rift S on an 1080ti on an 8700k which worked perfectly but a bit slow these days. Went with a quest 3 on a 7900xtx with a 7900x3d. It’s absolutely horrible in msfs, image quality is super but the blurring and stutters when I move my head, makes me sick. I’ve tried about 290 different things and not one thing has worked consistently. This video has given me about another 15 things to try. Hopefully I’ll fix it before the 7900xtx return window closes.
I plan on doing this as I have a old router but a good PC, I have a 10gb USB port would extra bandwidth help?
great vid. to the point
Quest 3 is the first VR headset I've bought. Mostly because of my daughter's wish, but now it seem I use it the most.
Been trying to mod the Skyrim VR and been trying to run it over oculus air link connecting to either my old router, or pc hotspot I created trying to simulate a higher frequency wi-fi access point with dissapointing results.
Your guides on SteamVR and PCVR helped me a lot get the basics Oculus 3 lay of the land.
Still wondering about Virtual Dektop app and the benefits of owning it.
My main PC has AMD 5600X CPU, Geforce 4070 GPU and 16GB ram.
Did you buy Virtual Desktop? are there any benefits?
Thank You!!
Hello, as-tu un aussi beau rendu avec le Q3 que le HP G2 ? Moi non avec ma 4070ti. En USB3 c’est le mieux ?
so i'm gonna be using mine for vrchat and other hangout games primarily, is my laptop rtx 2070 enough, the steam vr test said it was. but not sure how accurate it is.
Thanks for the clear video! What settings are you running on assetocorsa? do you use content manager? if yes, do you use steam vr or oculos vr?
Yes I use Assetto Corsa and Content Manager. My settings vary depending on which headset, the Custom Shader Patch and filter. I haven't tried Pure yet though. Also, you can improved performance with Open Composite and OpenXR toolkit (not some mods can conflict with it).
Thanks dude, i was using airlink but this is much better 👍
Is there a way to enable pass-through when using Oculus link? I'd like to play a game on a 2d screen but I really hate that Gray grid void in the background of every time I'm trying to do anything. I've been looking everywhere to try and figure out is there any possible way to enable pass-through on the quest 3 during questlink and there seems to be absolutely zero answer and it's very frustrating!
Thanks!
hello, do you need to use virtual desktop to use praydog vr mod in openxr when using link cable ? i dont want to use steamVr mode cause it has worst performance
Is the cable worth it? I'm playing with 30-40 latency with VD
Why doesnt the Kiwi link cable keep power to the Q3? Or does it? I just got my Q3 and Kiwi link cable yesterday (man what a headache setting it up!) at some stage I recieved a message that my Q3 battery was low. Its plugged in to the USB 3.2 powered (red) port so shouldnt it always be powered?
Great video. What confuses me is. They are not using direct dp port to video card. Instead opted for usbc with software to video card interpolation. What's the point in using a graphics card? Meta should have done a better job with that. Usb C video rendering is a waste of cpu power...
OMG!!! This worked for me, i used the exact same settings with Mobile ASW disabled and PC ASW 45fps forced in debug tool and 90fps in Oculus Software, no more jittery mess!
Edit: look in comment below if you still get jitter.
Cool which game and GPU are you running?
@@HamVR rtx 2070 & amd 3600, in asgard´s wrath. These settings made it much smoother, but i got jitter again. I changed my main audio while i was getting the jitter and it stopped!
Edit: had the jitter again, with 45 ASW, and matching main/oculus sound with 16-bit. This time it was enough to push the on/off button 2 times, so the screen turns off/on. Don't know how this is such a mess, but at least now i get to play longer before the jitter starts and make it go away easier.
@@HamVR I got jitters again after a long play session, and i think it has something to do with the mirrored game running full screen and having the console window up in Windows 11.
Whenever i get jitter again, the main game window pops in front of the console window and the on/off trick doesn't always work either. Now i've turned off vsync globally. But i'll test later tonight, have stuff to do, if the jitter doesn't come back i'll be playing the whole time :p
Bit sad it's a multitude of solutions, but i feel like i'm getting there or on to something.
Edit: it happened again with vsync off, i tried messing with the sound again, but i don't think it's the sound. When i right click on the sound icon, the Start taskbar stays open, doesn't go back to the game mirror and stops jittering. I don't know what to make of all of this, last test i'm gonna do is keep the taskbar open without the console window.
Edit 2: I tried it with only the taskbar open and not the console window, and for now it's buttery smooth.
@@theDubleD can yo uexplain more abou the taskbar? its something too weird
Something i discovered when testing my cable is it will show a different cable speed if the headset is not on your head and the screen is off on the headset. For instance i am showing a test speed of 2.1 with the headset off and a test speed of 3.1gbps when i cover the light sensors or put on the headset so the q3 screen is on before you test. Just Something to note.
I don't but invidia GPU'S never have. But it works perfectly on my RX 6800. I max out the render resolution as well. It had higher. FPS but looked way more stuttery.
Appreciate the guide. Still feel like I can't completely get rid of the feint compression artefacts on distant backgrounds. It's a pain not having direct input like with an Index as your streaming performance quality is eating into the game performance.
Yes DisplayPort is still king. That's why I like the Pimax Crystal. You can get less artifacting if you play at 72Hz, as you will be squeezing less frames into the same bandwidth.
Top bloke, Thanks a lot for these settings, ive owned almost every VR headset vive pro, valve index, hp reveb being the "best" hedsets but none of them have ran project cars 2 as good as the quest 3 with these settings, finally the jaggies are gone, the stutters are gone and the resolution and graphics are stunning by comparison, i have a 3090 i7-9700k and was always annoyed that i could never optimize this game even with decent pc specs. I dont have money at the moment but I will try to remember to come back and use your affiliate link for the powered usb cable. again thanks
I've got the same processor with a 4090, I've had such troubles trying to get things running good in vr. I tought it was the processor. Any ideas tips to get things running better?
@@joostvanh1217 to be honest i think an i7-9700k might be a bottleneck with a 4090 but you should still be able to run vr games and get good results. Unfortunately vr is not easy and there is a hole hoast of reasons you might be struggeling. What headset? Wired/wireless? What game? What software are you using ie steam vr, steam link, quest link, what issues are you having
Have an RX 6900xt card. What bitrate would you recommend ?
Thank you for the guide 🙏🙏 though one question does it apply to quest 2 as well? Specially the debug tool and 940mbs bitrate? Thank you again 🙏
The Quest 2 max bit rate could be lower, I use to run it at 500Mbps. I would just try 940Mbps it and see if the link connection holds, I haven't tested that myself on the Quest 2.
Nice video; I’ve got a quest 3 and for some reason I cannot get steamVR to launch! Just says SteamVR fail.. works fine using VD. Very strange
120 hz now working in link settings … need to wind back mbps to about 500 in ODT but once set AMS 2 goes up to the next level !! 😮
Very nice. Personally I'll stick to 90Hz as I don't like the trade off of squeezing more frames (at 120Hz) into the same or less bit rate, the codec compression becomes more apparent to me. This is where dedicated display port headsets really shine, compared to compressed video solutions.
whz the 120Hz is not available in your pc? I have a quest 2 and use 120Hz always. Hopefully quest3 has 120Hz support...
Hi! Can I ask something? The aftermarket link cable you show is a USB-A to USB-C type. But official Meta link cable is USB-C to USB-C. Isn't it a problem? Wouldn't this result in image quality loss or decrease compared to the original Meta link cabe? Just because USB-C has got more bandwidth than USB-A...
Hi, in short no. The plug type of USB doesn't guarantee a particular USB speed. You can buy type A to C adaptors after all. On my mother motherboad I've got several USB type A and type C sockets, all of which are USB 3.2 Gen 2 speed, regardless of their socket type.
What about the battery? My Q2 can go on forever with the 4 Bobo VR batteries while wireless so I am very happy with it, my question is can I expect the same performance when the topic is longevity? If not honestly I will not upgrade.
Probably not with the current Bobo batteries. The Quest 3 power adaptor is rated at 18W (versus 10W for Quest 2) which is why I recommend using a link cable that allows the Quest 3 power adapter to be connected inline with USB link cable.
Should we use openXR SteamVR or Quest Link? It's an option in the Quest software :O. Great video!
So wired is better no matter what correct? over steam link?
Thank you for the video . Its 3 week struggling with this quest3 for f1. I got a rtx 3070 . What refresh rate , resolution on the quest, render resolution, resolution on f1, encoded birate that i should run. I know i am asking for much but i need help run this game . Thanks you in advance
I would set it at 72Hz, Render Resolution 1.0 (increase if you have performance headroom - check the performance HUD), Steam VR 100% (Custom )Resolution and in game settings see my F122 settings video on a 3090 based on VR Medium preset ua-cam.com/video/WHDZ7zKvRlA/v-deo.html For the encode bitrate, if you link cable gives you a good speed test go for 940Mbps and only reduce if you get connection drops.
@@HamVR thank you very much !!! 👌👌👌
so will that cable you recommend keep the q3 charged? the kuject isnt strong enough it still drains the q3 but not q2 or would a 18w power brick make the kuject cable usable
It's not the cable, its the power adaptor. The Quest 3 ships with a 18w charger (Quest 2 charger is only 10w). You can get longer game time if you turn off WiFi and turn the screen brightness down to half and run at 72Hz or 80Hz. Otherwise, you will need higher rated adaptor or USB with PD. Some user have said 30w is enough, but there is no official guidance I can find.
@@HamVR Has their been any further discoveries about this topic? I am using a USB c to c cable on my motherboard and I lose battery very quickly. After doing research I cant seem to find any real proper solution.
do u need debug tool on all the time?
Thanks for this very helpful video. We were trying unsuccessfully to watch on a PC screen via link cable what the headset was showing and so the tip about oculus mirror was great. But we can’t find anyway back to start a game loaded on the meta quest 3. I just want to watch on the screen Jurassic World Aftermath as my grandson plays it on his quest 3. We tried casting to the phone but it was small and choppy. How can I watch it on the PC screen? Thanks.
Are you trying to spectate a Quest 3 standalone game? Unfortunately there is no great way to do that. You can try Side Quest screen copy but there's a lot of steps to follow to setup. Alternatively upgrading your Wifi router to 6e and having it the same room as the Quest 3 would help with the choppyness. If your PC is plugged into the same router you can try cast to computer option as per this video
ua-cam.com/video/x4fI0-JGLIU/v-deo.html
@HamVR you can cast to screen with quest 3 standalone. It's a bit laggy but it does work over wifi
how do you guys disable that annoying head tracking in not VR games when use oculus app and wired connection? each time I try to run it - it "emulates" mouse usage, and camera in games always moves with my head
How is the clarity on wired pcvr with the quest 3 compared to quest 2? Is it a lot sharper at highest resolution in oculus software on the quest 3 compared to the quest 2?
Yes it's clearer, sharper, bigger sweet spot, bogger fov and less god rays.
not sure i understood right, you said that the cable with the charger was fine on quest 2 but we are talking about quest 3 here... shows as 18w over the quest 2 10w. does that means that if i use the cable with quest 3 it will melt the cable or quest 3 while using it?
I’m saying that the Quest 3 consumes more power the Quesr 2, 18w. The USB power output of most PCs is typically 15w, so you will need a USB cable that allows for additional power adaptor input to maintain charge while you use it wired to your PC. You can turn the screen brightness down and disable WiFi to extend game play time also. The USB cable that comes in box is too short to use for wired PCVR mode, but is fine for charging the Quest 3 when not in use.
Any help? I have a kiwi link cable that states 2.9GBPS but ingame I can only go to 750 without visible display lagging behind
I was close to buy a Quest 3, but as i see, this will work dependin in the PC hardware, so first I have to upgrade my PC to run high performance software
I have a 3060 rtx laptop with highest watt version, I can run pretty much anything except no man's sky, do you know what's wrong with that game, is there something I'm doing wrong? the game runs just fine when connected through steam link app, not good with both airlink or cable link.
I have 2.4gb s nice. I had the 900 mbs on the wrong setting after following another tutorial. I had it on dynamic nitrate. And also had the steamVr resolution slider whacked right up instead of the oculus app resolution slider. No wonder Skyrim was all blurry. Well it may still be. Have to check. I hope not. I did get legendary tales to be sharp as a die but it kept stuttering because was airlink but probably just because my settings were not right. I sometimes find these things still stay messed up even after doing all this. So hopefully in this case it works.
What about a wall wort? There is so much conflicting information online, do I need a high speed wall charger? Should I use the one that came with quest?
If you use a USB cable that also lets you plug in the 18w power adaptor that comes with the Quest 3 e.g. via a T junction (like Kuject or Syntech cables) that should give you several hours of play. Also if you turn the brightness down and disable WiFi it will last even longer. A typical PC USB connection alone does not output enough power unless it also has Power Delivery mode (which is rare).
@@HamVR Awesome, thanks!
Hey how does the battery hold up while it's plugged in? Does it die or can you play pretty much indefinitely? I know the quest 2 never really died while plugged in but I've heard the 3 has a crappy battery.
You will get about 1 to 1.5 hours on wireless with a full battery. Wired to your PC you will get longer (amount will vary) however most USB sockets max out at 15w. The charger that comes with is is 18w. If you get a link cable that let's you let's connect the charger you can maintain charge. You can also extend battery life by turning down the screen brightness and turning off WiFi.
The type C (Meta Link) is supposed to be connected directly to the GPU or Motherboard ?
Motherboard.
New quest 3 user advice needed, I'm running the rx 5600 xt set at 1440p as my monitor is 1440p, should I go down to 1080p for vr gaming?
If you aren't recording the 2D screen you can go even lower like 720p or less.
@@HamVR so lowering my monitor will give me better graphics and performance on the headset? Sorry if it seems a dumb question.
For example on assetto corsa I get a lot of artifacts and visual quality isn't great.
my quest 3 was working just fine through the link cable and now all of a sudden it wont find my pc and i get a notification of slow charging. Any idea why this would happen. Air link works just fine, my cable is brand new and its the actual quest link cable
.
In my Quest 3 software Graphics Settings, it shows the 72, 80 and 90 hz 2x? So it looks like, 72 hz 72 hz 80 hz 80 hz 90 hz 90 hz. I have watched a lot of Quest 3 setup videos, and none of them have double hz settings like mine. I deleted the software and reinstalled it, but that made no difference.
nice video. Do you feel Oculus Tray Tool is still relevant to use?
I don't use it myself anymore, but it can be handy for creating settings profiles on a per game bases.
What kind of GPU do you have? I have a 3700ti or whatever and microsoft flight simulator is like looking into a fish bowl.
To run the headset off of link cable can it be type c to type c into motherboard or does it have to be usb A 3.0 to type c
It can be either. Cable quality and USB motherboard quality (noise) are the most important.
I also have a Kuject for £20 that gave the same performance.
hi, your 2.3 gb usb3 data speed is abysmal, what's that mother board ?
By comparison with my good old i7 and a msi mother board at 2.4 the image quality is really really poor but with my 5800x and an Asus b450 I get 2.8 or someday when it is in a good day 2.9 and it's night and day !
I'm using Asus B650 TUF (the other part of the equation is the cable). The link image quality is affected by the Encode Bitrate in Oculus Debug, so as long you can maintain stable connection at 940Mbps (1.5Gbps should be ample) it doesn't matter how much more speed you get beyond that, it wont increase the image quality more.
Why does the rendering resolution go up higher than the actual resolution of the lenses? This is the same way with my reverb G2 does setting it higher than the actual 2160p make a difference
The VR scene needs to be rendered higher than the VR panel resolution to accomodate for lens distortion correction.
hub.vive.com/storage/docs/en-us/DistortionCorrectionTheory.html
Ok. I tried to run Phasmaphobia for my daughter. With the Q3, we got everything to recognize eachother but it wouldnt fully load the game. The specs of the pc are much better than bare minimum. Not high end but mid. We dont have a gaming router so I plugged in with an ethernet cable. But I think the cable itself is low end, if I get a better internet cable and direct plug in to the internet is that better? Similar to having the wifi 6 whatever it is? What type of internet cable ? Thank you for this video I'm sure I will come back to it once we get things running a bit better.
Device name DESKTOP-1CQMD45
Processor AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz
Installed RAM 16.0 GB (15.9 GB usable)
System type 64-bit operating system, x64-based processor , Nvidia GeForce RTX 3060
Good enough?
I saw a video with someone testing Wifi connection and he was pretty happy with it - did you test anything like that or don't you have Wifi 5+?
This was running on 6Ghz on WiFi 6e router
wait the whole video is about the wired connection, I'm confused@@HamVR
@@884tomato Sorry I thought you meant one of my live streams. I did a live test with Virtual Desktop on a Wifi 6e router. This video is for wired only.
Yeah I testes myself, Wifi 5 is good enough, only problem is sometimes it chooses the 2.4 network and I could rename each individually, but my printer and my robotics need the 2.4 lmao@@HamVR
Is it necessary to leave debug mode open?
I bought a KIWI design Link cable, but the Oculus App isn't finding it as connected even thought it is. I don't know why not, its plugged into a Blue USB 3 port at the front of my PC.
hey which cable should i buy for quest 3 ??? did the kiwi one work?
When i start linking i lagged so much even without launching any game, i waited 5 minutes then it start working then i launched Beat Saber then start lagging again, any solutions? I think it’s because my PC is very weak ( GPU gtx 1650 super CPU Ryzen 5 3600 )
The Kuject cable only works with USB 3.2 gen 1. It's sad, though I can still use it as a charging cable.
I set FOV - Tangent Multiplier to 0.6; 0.6 in debug tool. Oculus app to 80fps with slider max. That allows me to set games to ultra. AMS 2 maxed, ACC maxed with Res 100% and VR pixel density 140% and gives decent amount of headroom. MSFS is also running really well for me and I now finally get 80 FPS when set to ultra with TLOD at 130 And OLoD to 200 when over countryside, Inturn on ASW forced when over built up areas. This is on a 4090 and 12900kf using Quest 3 and official link cable. I can go 90 but choose not to as gives a little more headroom. Also bitrate is set to 800, any higher and I get audio stutters on occasion.
0.6 Tangent multiplier is a large amount of FOV to drop. I'm guessing you have your eyes quite far from the Quest 3 lens then?
I have sight loss affecting peripheral vision so it doesn’t affect me, although I don’t see a massive difference in the headset when looking around. I wear glasses most of the time so not close as without. Going to get some prescription lenses for it. At least vision loss has one benefit, it helps with VR performance…
@@JamieP_77what distance you have set up on your facial interface? I was using 3 with glasses and 2/4 is best i can fit my eyes with prescription lenses.
@@caseyrybak Hi, mine are set furthest at the moment as I don’t want to scratch lenses. Not ordered prescription lenses yet. Going to this week, Which lenses did you go for and are you happy with them?
@@JamieP_77 I'm using WidmoVr, it's ok, but not happy when i want to share device with a family/friend and need to insert the prescription lenses again, sometimes it take few seconds, and sometimes i takes 40+sec to insert 1 lens.
Hey i have a laptop dell g15 gaming i7 rtx 3060 16Gb ram i cant play with Alyx or walking Dead...even in the Steam VR menu it is stuttering and too many lags...😢
Whats the default Settings. I dont know what i change at all and now it lags the audio
Airlink vs wired? I am debating whether I should invest in a router or a cable. What's your opinion?
Try cable first, it's cheaper and usually gives the best results. If you need wireless or have USB problems, try AirLink or Virtual Desktop, but make sure your router is one recommended for use with Quest 3.
@@HamVR Thank you for your reply. If I use meta's link cable, will my quest 3 maintain its battery life i.e run indefinitely? Also, if one is running wirelessly how is the battery life problem tackled?
@@user-sz1gn4pu8g it runs longer than wireless but not indefinitely. For wireless an additional battery is recommended.
I've been using airlink for Asgards Wrath and it works perfectly. AC on the other hand runs really badly, which is shocking bc it ran flawlessly on my oculus rift. Is there some way/setting to improve performance over airlink? I have a kickass wifi 6e Asus router
When using OpenXR which OpenXR driver are you using?
I'm using the default Oculus OpenXR runtime that come with the app (General - OpenXR Runtime - Set Oculus as active) which is currently v1.89.0
Nice video, but when i try to change the FOV setting , it doesnt work ( even when i restart the service)
Have you ever seen that pb?
Try changing the FOV tangent multiplier to a value less than 1.0 in Oculus Debug tool. Sometimes the SteamVR FOV setting is ignored.
it just wont connext is it my cord por pc or headet cuz there are 0 problems with q2
Are Q3 support 120hz? or with PC connect it maxed out to 90?
Still maxed at 90Hz via cable currently.
HI, I ran the install but have no Oculus app? I just have Meta-Link and nothing else - have things changed? This is all a bit confusing LOL
yeah the oculus app for pc got renamed to quest link or whatever
THE BRILLIANT COMMENT which works for me: H264 is for wired and H265 for wireless !!!!
Explain please
@@hypewilkens I had the issue with Quest3 in PCVR where picture was not stable, but thanks to this video and comment from HamVR, I went back and changed it back to H264 for the video codec, which made it all brilliant for me. Look at 11:04.
If i dont have a usb C (3.0) port on my pc, can i use a adapter from usb -a to usb c? I only have usb-a (3.0) sockets..
Yes although the adaptor may add noise, depending on the quality. Alternatively get a Kuject link cable which is type A to C anyway.
@@HamVR Thank you😊
If i try to active Spacewarp comes the error "Failed to change ServiceAsynchronous Spacewarp to 3"!