BSA R10 Tuning (Increased shot count)
Вставка
- Опубліковано 25 сер 2024
- Hi guys sorry for the late upload my PC stopped recognizing the hard drive I use to store the videos so I lost all of my editing progress.
But in this one we replace the hammer, hammer spring and pellet probe, make some little changes in the rifle. We upped the shot count up from around 120 shots from a 200bar, to around 190 shots from the same 200bar fill. We set the reg around 80bar. All groups at the end were at 50 yards and 5 shots each.
Thanks for watching.
Thanks for all your video’s, they’ve helped me do complete Seal change, huma reg fitment, light weight hammer and new spring, trigger polish and stainless pellet probe change, made the world of difference to my r10. 👍
Glad to help
I bought a stainless steel pellet probe from a good supplier. I had to polish the rear section with 2000 grit wet and dry followed by Autosol metal polish to give it a mirror shine. Without this, it felt unpleasant in the gun due to the very fine machining marks acting as serrations in the delrin shuttle. It would have worn the delrin in no time whereas now it feels smooth like a new chrome one
Great video! Enjoy watching them, always interesting and easy to watch. Keep it up!!!!😀😀
Thanks much appreciated
Well, you've managed to better the shot count and overall performance of your .177 compared with my old .22, which was tuned by a well known tuner. Awesome results once again Jake 👏
Cheers Tony, pleased with how this one came out now all it needs is a shroud. Thanks for watching.
Do you work on peoples guns?
Great video as expected guys👍🏼
yet again another great informative video boys and massive help to others as always as not many top tuners share there work👏
I have two mk1 r10’s one in .177 and another in .22 both silly accurate and both running nr identical spec to yours 😉
Cheers, amazing what you can do with just a lighter hammer and a bit of work. Thanks for watching.
@@sub12airgunners hi do you do any tuning ?
Would love to send you one of my guns
Thanks lee
@@leesmith7908 No sorry mate we can't take in rifles for tuning. thank for the interest though.
@@sub12airgunners ok thanks
Is there anyone you could suggest I try ?
Thanks again
Lee smith
Great video Jeff! It believes belief that a company like bsa would allow so many design faults to pass their quality control. For example a chromium pellet probe! Any engineer knows chromo starts to peel after😢 a few years! Another I read the rifleing stopped short of the muzzle by about 5 mm. Again the muzzle is the most critical for the barrel accuracy! Jeff had to shorten the barrel and crown the muzzle! I have shot bsa rifles since the late 50’s and never had any manufactured faults like that! I fear that takeover by Gamo might be something to do with the poor quality control! Another gripe I have is with Air Arms! I have a AA S400 (.177) for 7 years which has been pretty accurate for target work! I thought I would give it a service only to find anti tampering all over it! Thanks to Jeff I was able to get rid of all this nonsense! A local rfd told me it was illegal to remove it! I found out through a lawyer that this is absolute tripe! As long as the gun is sub 12 ft/lb it is within the law! I set mine to 11.5ft/lb with the heaviest pellet I could find and put a touch of thread lock inside the adjustment screw! I have saved myself several hundreds of £’s in freight and gunsmiths fee’s! What in the hell is companies like AA bsa etc playing at! I suspect it boils down to greed and money! After all you could buy a powerful sports car that could do 150 mph but you still have to obey the speed limits!
Great video mate, my r10 trigger moves from side to side so I'm going to look into getting it shimmed as you have done. Cheers.
Works a treat, Thanks for watching
@@sub12airgunners what could I use as a shim?
I have the .22 super carbine and got 200 shots from the standard 200cc bottle charged to 230bar. I have had the rifle converted to an Airtech Rifles stage 2 rifle. I was getting 220+ shots. I have now added a 300cc carbon (300 bar) and can fill to 250bar (upgraded internals) and get 350 shots. I charge to 200 bar and get a couple of hundred shots before I stop shooting with plenty in the tank (wink wink)
Got the parts from apex airguns, very simple process to follow and my R10 feels so much better and quieter now. The trigger took a bit of resetting and the new spring made it fire very hot before adjusting it
it worth doing it does make the gun better 👍 glad the vid helped
Great vid Jeff. I would like to sort my R10 with the parts, but was thinking of going R12🤔
The R12 is supposed to be better suited to sub 12 boasting a higher shot count and a better set up, but I have not had the chance to look at one yet so I don't know for sure. Thanks for watching.
Maaf🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻 walau saya tidak mengerti apa yang anda bicarakan tapi saya sangat suka melihat video anda mengulas tentang senapan angin,,,,, sukses terus buat anda
Thank you
my first se R10 did 150 shots but my second
one does only 120 on a good day but still love it
Did try 500cc bottle from best fit on my first r10 but i think i need a Huma reg with it
keep up good video
My R10 se 177 dose 150 shots but bsa state 190 😂
Cheers, they do well with the better bottles I think it may just come down to how well the rifle is setup from the factory, they seem to be a bit hit or miss. Thanks for watching.
Great vid again Jeff wish i had the balls to try to do the same to my R10
Cheers, its not that scary once you get into it, the only tricky bit is cutting down the spring. Thanks for watching.
I started out with a HW95 then 98. Soon had a go at a spring and top hat and sleeve swap. Then bought a HW100 had issues sold that and got a bsa r10 mk2, got the urge to tinker so had a go at fitting a Huma reg and stainless prove following this vid and others, it was very easy
Have you ever done a super 10 mk3 tuning video?. Have an old one in good condition I've had serviced but is still under power. About 8. 5 ft pounds. Any idea for the best way to bring this up to 11 ish. Also have the R10 and Ghost and have watched right through those. Great info in them, Thanks
Excellent vid Jeff. Do you sell the Hammer and springs? Keep up the good work👍🏻
We have the hammers and they will be on ebay soon although the springs are getting hard to source, Thanks for watching
@@sub12airgunners thanks Jeff, I’ll have a look on eBay now👍🏻
@@sub12airgunners Sorry to bother you Jeff! Do you have a link to your eBay store? Thanks Andy
Jeff do you do rifle tuning ?
Thanks
Hi, after a recommendation from Lee, wondered if you had any .22 leshiy 2 speed loaders?
Excellent video once again… any chance of getting hold of a brk ghost to dismantle put it through its paces and see what all the hype is about!
Its on the list we do hope to get one in the near future, the delta wolf was a fantastically built rifle and I have no doubt that the ghost will be as well, as its the same rifle just mechanical instead of electrical. Thanks for watching.
@@sub12airgunners I’m particularly interested in the new valve system because I’m only getting 110 shots from my fx dreamline 300 cc bottle brk ghost claims 300+… on there 300cc bottle which would suit me fine it means I can be on the gun range for 3 hrs instead of one hour before I have to take the gun to the gun shop and fill up plus it’s lothar walther barrel … anyway we’ll see thanks .
Can you tell me where the video is you mention with the previous changes like the barrel, ive been through the videos on your channel but not found anything
Hello m8 don't suppose you could make an adapter for baa r10 so could put say fx carbon bottle....
I think Bestfittings make an adapter for the carbon bottles that replaces the FX one, although you need to modify the stock to make it work. Thanks for watching.
Hi geof which sub 12 rifle out of the box is the best made, and doesnt need tuning .like the bsa does.thanks geoff
Is it advisable to Loctite the grub screw where the trigger weight spring is?
Have you tuned a super10? Or could you get hands one to do a video
Never touched a super 10, but ill keep my eyes out for one. Thanks for watching.
Do you tune rifles commercially? I'd like my R10 se tuned.
Hi sorry know we don't we only do work on our own guns 👍
My R 10 has a new problem where the air is leaking out from the hammer tube assembly !!! when filling .
Sounds like the valve is leaking, you could try cocking the rifle whilst filling it. Thanks for watching.
@@sub12airgunners Definitley the hammer tube , havent gone any further need to find a competent gunsmith that knows these things .and here in aussie they are as scarce as hens teeth 😒
where did you buy the barrel?
from ebay
Hi Geoff, thanks for another great video. I have one of your hammer, hammer spring and stainless pellet probe kits fitted to one of my R10s but would like two more complete kits if possible. Will you be selling these parts again? Thanks, Andy.
Possibly, I have some hammers made and am just working through the pellet probes, but the springs are proving hard to get so we wont be selling the springs, although if all goes well the probes/ hammers should be on ebay by the end of the week. Thanks for watching
Brilliant
thank you 👍
1st love my mk1 r10
They are nice rifles. Thanks for watching.
Where can you buy all these parts from?
we do batches and put them on ebay there will be more going on soon😀
@@sub12airgunners is there a link for the ebay store 👀
Hi Great Vid! I have a question, how much is your service for bsa r10 mk2 in .22 full retune and upgrade I like the idea of a stainless probe as I do pest control in all weathers and anything that prevents rusting is a bonus for me.
Hi sorry we don't do other peoples guns
@@sub12airgunners that's a dam shame no worries
HI just wanted to leave a comment about your videos, I am new to the sport , I started off with a Gamo Phox awesome little starter riffle and just purchased the R10 SE from guntrader private sale, the pressure was low when it arrived, so you guessed it was loosing pressure, So getting to the point, I was able strip the gun replace all the seals and fit a new huma reg I purchased a fx crono to set the hammer good job because it was pretty high. So a huge thank you, This is all because of your videos, they are awesome. do I need to be aware of anything with the huma going forward ? I wanted to do the trigger also but I read you cannot get the springs, if this changes will you do a video to let folk know ? thanks again Paul
Hi thanks Paul no the huma regs are pretty good so no worries there
will this type of tuning work with a BSA ultra SE ?
Should do the ultra is basically the same rifle with a few minor changes. Thanks for watching.
@@sub12airgunners awesome, thanks chief
Hello, I want to buy these parts, where can I buy them? can you help me .thank you
Tried looking for your stainless probe can't find any ,also looked on agf nothing.
Can you help please
Hi we don't have any at the moment sorry
@@sub12airgunners any idea when please ?
I've got a bsa ultra that needs attention how can I contact you please
sorry we don't take work on commercially
what would this cost be if i wanted you to do it ?
sorry we don't do tuning on other peoples guns 👍
Hi. Would you sell me the hammer and spring upgraded pleased?
sorry we don't sell them 🙁
Can you do the r12?
we will be doing an r12 very soon 😀
Hi can i send you my R10 to get tuned up please
Hi sorry we don't do tuning work on peoples guns