@@smc-2 You have every right to be proud of Tamiya and your Work . Tamiya is also very famous and well respected in Australia ( My Home ) and around the world.
I asked the figure to do a little acting. The heavy braking slowed the tank, and the tank commander only suffered minor bruises and scrapes. good. I'm relieved. Thank you for your comment.🍺
You noticed it well. It's a mistake that I make often. However, the part 2 video has already been shot and the editing work has also been completed. If you fix it from now on, everything from shooting to editing will have to be redone. I'm sorry, but the Part 2 video will be posted as it is without any cure. Thank you for your understanding. Part 2 will be posted on December 9th. Stay tuned. Thank you for your comments.🍺
Good model build, One question, what system or technique have you used this time to create the natural shape of the tracks? In the video you can see that when you disassemble the tracks they already have the natural shape of the drop.
ua-cam.com/video/0_BqaTvRFkg/v-deo.html You can see how in the video above. Bite the spacer, heat it with a hair dryer, and then cool it in the freezer compartment of the refrigerator at once to fix the shape. However, this method is dangerous and can fail. I can't recommend it highly enough.🍦🍦🍦
A wire is passed through the car body and the belt-type track is pressed down to add slack. The Panzer III Part 1 video I posted earlier explains how to do it in detail. Please take a look at it. Thank you for your comment.👍
This is the product linked below. www.amazon.co.jp/TJMデザイン-PS-ITOSS-タジマ-パーフェクト墨つぼ用極細糸-30m/dp/B00LWIF22A/ref=sr_1_2?__mk_ja_JP=カタカナ&crid=26Y78VZF2AK8J&dib=eyJ2IjoiMSJ9.ppO8D0SSdSwU60I2o0pSZoLozdnT5qY8K08g7jXJWoRQwvfZyYlhoJ8rnAZXr5MlUcC2hL037yrVRp1enKeZlUmVQvfdDH7cCyEx5LX0qNq1FM9xzd-f6rTh_pDc0kkNBWI36pYXLpnXtgepKwcmSmDj9v1CEoSv512NqpyXyBAM17w00bm91D1oXmgfglmpyhVQdXx0aDmUQj5F18YnyxY5mkIyESU8EVEO3Fo4qDpzvMDT_pOaIQtdIIG3lbMPdK9pqQTvpqs-1qgLwcnmUVaKAo8r4XYRjH9WON2hiCw.GZQyll4Z1VGWN2kEqVVaRh-G5Ab9oAAWrAmWv1nK6_k&dib_tag=se&keywords=墨壷用極細糸&qid=1722377549&sprefix=墨壷用極細糸%2Caps%2C144&sr=8-2
Hello sir, I searched on the internet the plants that you use for the camouflage of your model but I could not fond them Can you tell me where you fund the plant Ps : sory for my Englis I’m Frensh
Очень красиво, просто блеск, восхитительно. Я не кому не скажу но гусеницы в разную сторону направлены, хотя кто сказал что такого не было. На войне и не такое было.
Great build! It's a nit-pick, but on the left side, what kind of explosion on the armor plate would cause it to bend out like that? Shouldn't the bent plate warp inward from the impact?
@@BTrO1995, if it wasn't for the 180 Billion Dollars worth of aid (in today's money) that the USSR received from the USA during WW2 then it would simply have collapsed under the German onslaught, fact.... and so today's 'Wagner' butchers would not be in existence at all..... ironic then that all that US aid today is going to Ukraine against the 'New Nazi's', which of course is Putins RuZZia. SLAVA UKRAINE.
![1/35 - StuG IV Camouflaged with plants - Part 2 - Tamiya - Tank Model - [ Painting - weathering]](http://i.ytimg.com/vi/uoyrsKk5oQM/mqdefault.jpg)
![1/35 - StuG IV Camouflaged with plants - Part 2 - Tamiya - Tank Model - [ Painting - weathering]](/img/tr.png)
![StuG III and Armored Howitzer - Part 2 - 1/35 Tamiya - Tank Model - [ Painting - weathering ]](http://i.ytimg.com/vi/K6TKHT7T4Dw/mqdefault.jpg)
Those old Tamiya Kits are still good kits . Cheap , easy build and come out nice.
I completely agree. It is a kit that can still be enjoyed. Thank you for your comment.🍺
@@smc-2 It's a shame the old Tamiya are overlooked , but you have done it proud.
Tamiya is a world-famous plastic model maker with a long history in Japan. As a Japanese, I am very proud.👍
@@smc-2 You have every right to be proud of Tamiya and your Work . Tamiya is also very famous and well respected in Australia ( My Home ) and around the world.
@@parabot2 Thank you. I'm happy.🍎
Wow, you gave life to that old model kit from Tamiya! Your assembly skills and play with accessories and foliage makes this StuG stand out!
It seems that you enjoyed it, and it's more than anything. Thank you for your comment.🍺
Another terrific video. I'm eagerly awaiting the part 2. Top work.
Part 2 will be posted in two weeks, on December 9th. Please look forward to it. Thank you for your comment.😆
Great what you did with the old Tamiya model, very fascinating, remarkable work!!
Comment Thank you as always. It's an old model, but it's still very enjoyable. As expected of Tamiya.😄
That was Funny when you hit the horn and ran the commander over!!! Lol I love your video's please keep them coming!
I asked the figure to do a little acting. The heavy braking slowed the tank, and the tank commander only suffered minor bruises and scrapes. good. I'm relieved. Thank you for your comment.🍺
Great build of this vintage Tamiya kit. 👍
Thank you.👍😄🍎
Beautiful work as always! :)
Comment Thank you as always.🍺
love those foliage!
It can be used for various tanks and is very convenient.✋
Nice to see. Thank you for sharing
Thank you for your comment.😆
私はずいぶん昔からタミヤさんを作っていますが、何故か突撃砲は作ったことがないです。
今回もプラバンやティッシュの加工など参考になりました。塗装編を楽しみにしています。
参考にしていただけるなら嬉しいです。日本人の方からのコメントは非常に少ないので、私としてはコメントをいただいてとても嬉しいです。👍😄🍎
ReAlly great work. Super enjoyable watching this come together. Thanks
Part 2 will be posted in 2 weeks, on December 9th. Stay tuned. Thank you for your comment.🍺
Nice workflow 👍
Thank you.😄
Love the music, love the model kit, love everything. I hope to see your channel grow !
Thank you.✊✌️😄
いつも拝見してますが
素晴らしい完成で惚れ惚れします
自分には出来ないです
羨ましいです
いつかやってみたいと思います
素晴らしいです✨✨
コメントありがとうございます。日本人の方からコメントをいただくと、なんだかホッとして嬉しくなってしまいます。これからもよろしくお願いいたします。🍺
Thanks for sharing another great build ! just one little detail, fix the tracks, one is on the right position and the other is wrong.
You noticed it well. It's a mistake that I make often. However, the part 2 video has already been shot and the editing work has also been completed. If you fix it from now on, everything from shooting to editing will have to be redone. I'm sorry, but the Part 2 video will be posted as it is without any cure. Thank you for your understanding. Part 2 will be posted on December 9th. Stay tuned. Thank you for your comments.🍺
Good model build, One question, what system or technique have you used this time to create the natural shape of the tracks? In the video you can see that when you disassemble the tracks they already have the natural shape of the drop.
ua-cam.com/video/0_BqaTvRFkg/v-deo.html
You can see how in the video above. Bite the spacer, heat it with a hair dryer, and then cool it in the freezer compartment of the refrigerator at once to fix the shape. However, this method is dangerous and can fail. I can't recommend it highly enough.🍦🍦🍦
Hi are those the rubber tracks if so how did you get them to sag.
Thanks John.
put hot water on them and then put like toothpicks or something that will hold them down in desired areas
@@aliceshimada1067 thanks that's very helpful I'll give it a try.😊
A wire is passed through the car body and the belt-type track is pressed down to add slack. The Panzer III Part 1 video I posted earlier explains how to do it in detail. Please take a look at it. Thank you for your comment.👍
Nice model and detailing. What material do you use to tie the rear accessories?
This is the product linked below.
www.amazon.co.jp/TJMデザイン-PS-ITOSS-タジマ-パーフェクト墨つぼ用極細糸-30m/dp/B00LWIF22A/ref=sr_1_2?__mk_ja_JP=カタカナ&crid=26Y78VZF2AK8J&dib=eyJ2IjoiMSJ9.ppO8D0SSdSwU60I2o0pSZoLozdnT5qY8K08g7jXJWoRQwvfZyYlhoJ8rnAZXr5MlUcC2hL037yrVRp1enKeZlUmVQvfdDH7cCyEx5LX0qNq1FM9xzd-f6rTh_pDc0kkNBWI36pYXLpnXtgepKwcmSmDj9v1CEoSv512NqpyXyBAM17w00bm91D1oXmgfglmpyhVQdXx0aDmUQj5F18YnyxY5mkIyESU8EVEO3Fo4qDpzvMDT_pOaIQtdIIG3lbMPdK9pqQTvpqs-1qgLwcnmUVaKAo8r4XYRjH9WON2hiCw.GZQyll4Z1VGWN2kEqVVaRh-G5Ab9oAAWrAmWv1nK6_k&dib_tag=se&keywords=墨壷用極細糸&qid=1722377549&sprefix=墨壷用極細糸%2Caps%2C144&sr=8-2
Thanks!!!
Hello sir, I searched on the internet the plants that you use for the camouflage of your model but I could not fond them
Can you tell me where you fund the plant
Ps : sory for my Englis I’m Frensh
I can't find anything when I search for Gypsophila Dried Flower? I'm in trouble. I bought it on Amazon Japan.🍺🍺🍺
Смотря ваши видео аж хочется сделать по красоте свои недоделуи штурмапанцера 2 и валентайна от АРК модель
Я думаю, что оба танка интересны. Наслаждайтесь этим столько, сколько вы можете. Спасибо за ваш комментарий.
Nice job! what type of camouflage plants do you use? where do you buy them?
I use Gypsophila Dried Flower Small (Green). I bought it from Amazon Japan.🍺
Ля, как всегда огонь🔥
Спасибо.✋
Очень красиво, просто блеск, восхитительно. Я не кому не скажу но гусеницы в разную сторону направлены, хотя кто сказал что такого не было. На войне и не такое было.
Я часто замечал, что направление трека было другим. Это ошибка, которую я часто делаю. Спасибо за ваш комментарий.🍺
Great build! It's a nit-pick, but on the left side, what kind of explosion on the armor plate would cause it to bend out like that? Shouldn't the bent plate warp inward from the impact?
The armor plates in that video were eventually scrapped and never used. Watch the video for Part 2.🍰
I WANT part 2!
Part 2 will be uploaded on December 9th. One more week, please look forward to it.🍺
awesome model dude, what kind of string/rope do you use to secure the stowage?
I use the acrylic thread used for carpenter's ink pots.🍰
すばらしい動画ありがとうございます。キャタピラはキット付属のベルト式の物をたわませているのでしょうか？
きっと付属のベルト式の物にたわみをつけ使用しています。🍔
@@smc-2 ありがとうございます！何か熱を加えてたわませているんでしょうか？
@@kuma1969 SU-85の組み立て動画パート1の中で詳しく説明しています。下記URLで見る事ができます。🍺
ua-cam.com/video/0_BqaTvRFkg/v-deo.html
@@smc-2 恐縮です！ありがとうございます。
Where can I order the plants you used please?
I bought it from Amazon in Japan.🍦🍦🍦
B AndQ
Spare tracks hooks are missing. Please fix this
Thank you for your comment.✋
お疲れ様でした。懐かしいキットですね、子供の頃造りました。履帯は付属のベルト式ですか？いい塩梅に弛んでますね。
履帯はゴムバンドの様なキット付属のものです。いつもの様に針金を貫通させ、押さえて弛みをつけてます。数千円もかけて社外品の履帯を買うというチョイスは私の思考の中には残念ながら存在しないのです。あくまでもお財布にやさしく、リーズナブルに趣味としてプラモデルを楽しむというスタンスを今のところは心掛けています。いつもコメントありがとうございます。👍😄🍎
is that the late production model?
I don't know because the kit doesn't have any description of the latter half or the first half.🍉🍉🍉
@@smc-2 okay 😃
Вопрос! Что у вас в учебниках истории в США пишется о том кто брал Берлин весной 45-го?
Советский Союз.
То чувство, когда невольно в голове заиграл гимн СССР. 😁
А вообще интересно пообщаться с человеком из за океана.
@@BTrO1995, if it wasn't for the 180 Billion Dollars worth of aid (in today's money) that the USSR received from the USA during WW2 then it would simply have collapsed under the German onslaught, fact.... and so today's 'Wagner' butchers would not be in existence at all..... ironic then that all that US aid today is going to Ukraine against the 'New Nazi's', which of course is Putins RuZZia. SLAVA UKRAINE.
Sometimes i wish he spoke in these videos
I'm not good at talking. Sorry. Thank you for your comment.🍎🍎🍎
👍
👍😄🍎
Brill kit for the money
That's right at all. It's a great kit. Thank you for your comment.🍎🥝🍑🫐🍉
What is the foliage pack you use?
I use Gypsophila Dried Flower Small (Green). Thank you for your comment.✋
@@smc-2 Thank you so much. I’ve just discovered your channel - your work is amazing!
@@derekrawlings1289 Thank you.✋
2:58😂
大丈夫、彼はスタントマンです。😄
Что то не похоже на русский танк
Немецкий танк.🍺
Следующее, что я буду постить после StuG IV, это советский танк.😄
@@smc-2 ну дай то бог.. дай то бог..😁 интересная техника работ кстати, и ещё возможно этот штуг приобрету.