Sorry for such a long wait for new build video, but i am also in the middle of 2 diorama builds, actually, im close to finish both now so expect new videos very soon :)
Love you guys, great model ,brings back memories of going to the candy store on Fridays after school to buy Aurora 1/48 scale tanks building them ,then on Saturday go down to the beach and play
Excelent building of the German Armored Halftruck , great work at the assembling parts and painting and the weathering process is amazing . This kit have amazing details ! Thank you for sharing !🏆🥇👏👏👏👍
I AM GRAVITATE TO U-BOATS , AND SOVIET FIGHTERS , RATHER THAN ARMOUR , HOWEVER I MUST ADMIT THIS HANOMAG IS " ONE , FINE , BUILD ! LOOKS LIKE MUSEUM QUALITY SIR !
Not sure how I missed the upload (of course I am as Im always working lol) but I've been really excited for this one since the pic you uploaded! Thank you!
Piękna praca i taki sam efekt końcowy, ale nikt przy zdrowych zmysłach nie umieścił by w taki sposób granatów, nawet doceniając wszechobecne olewactwo żołnierzy. Taka tam uwaga
well, its something you really need to figure out yourself to be honest. Too thick its where aibrush splashes a dots of paint, too thin and its gonna over flow, you need to find a right balance. Try to spray it not on your model first but on some spare parts or styrene strip/sheet and see how it goes, than add more thinner or more paint and see how it goes
very very nice! may I ask you if you can record a video dedicated to the correct way to use Modellers World Weathering products? I have both washes and pigments but resulted into very bad results. It would be great if you can provide the correct information on the way to apply them over the colored surfaces, how remove the excess etc etc.
The pigments are like any other pigments, the problem with wash however, is that you really need to shake it well to the right consistency and need to shake or stir it from time to time during your work otherwise its gonna be too thin. I found them a bit hard to use on panel lines, but great for creating some flat stains.
@@ScaleHangar182 thanks for your answer! In reality I had several issues with their washes. Eventually I used the wrong clear. I tried with aclad gloss and totally ruined a nice F-84. may I ask you what clear you use to seal the model properly? Thanks!
Looks pretty good other than the one crooked decal on the side and pristine looking decals all around . To me they really stand out and detract from the overall model. From what I have seen on your other builds and the quality of them this one was a little underwhelming and seemed rushed.
You should just stick to your model video’s instead of aggressively attacking a modeling company and it’s customer base and forcing your opinions on others. This used to be one of my favorite channels.....un-subbed from your channel and unfollowed on your Facebook page.
Scale Hangar 182 it was the arrogance you displayed. The same arrogance in your comment towards me just now. Don’t forget to leave another comment after this one. Remember it’s important to have the last word...... cheers
@silverstacks Company has used pictures of real people what was really nasty. Everyone, who has knowledge about war and atrocities what has been done to other people, should know it's not good way to promote own products by using pain and suffering of other people. If you do it, you are heartless sadist
As far as i know, arrogance means that i behave like im more important than others you probably mistaken simple arrogance wit self-confidence, this is scale modelling channel and scale modelling brand just did something really bad and instead of apology, they worsten and i have rights to express my own opinion that i shared. You calling me an arrogant like a bit dictator, telling me what to do and and refuse to listen to my opinions. And again no one wants to see you go on a virtual world tour saying goodbye
Sorry for such a long wait for new build video, but i am also in the middle of 2 diorama builds, actually, im close to finish both now so expect new videos very soon :)
Scale Hangar 182.....It was worth the wait 👍🏻👌🏻
Agree with Septic Calling. Well worth the wait! You don’t rush perfection.
I love tanks and aircraft models more than ships I also like railway models. Bc that is what brought me to the hobby railway landscape modelling
When you started adding the snow effect, I swear it was like I could feel the temperature dropping around this half-track. Excellent work as always!
Great job love a good winter camo, nice to see more people building 1/48 armour kits
Your painting and especially your weathering work is what makes your builds (and videos) *really* stand out!
Incredible! One of the best models I’ve ever seen.
Nice winter camouflage work. Inspires me to finish mine with winter camouflage. Great job!
Love you guys, great model ,brings back memories of going to the candy store on Fridays after school to buy Aurora 1/48 scale tanks building them ,then on Saturday go down to the beach and play
You make it look so easy.
Awesome man, I just got this in 1/35 and if I get 50% of what you do I here I would be very happy.
Awesome build! Amazing work
I really your projects guys. But the hairspray technique has been the best. 😎
Very nice job! lovely model!
I usually don't comment much, but I do enjoy your builds. Great work, thanks.
Great build! I built the tamiya 1/32 version of this on my channel. Funny how we both did a white wash and it came out very differently
Im not very good at whie wasing :)
Well worth the wait. Great weathering on the winter camo. One to be proud of
Brilliant video and build
Excelent building of the German Armored Halftruck , great work at the assembling parts and painting and the weathering process is amazing . This kit have amazing details !
Thank you for sharing !🏆🥇👏👏👏👍
Fantastic work. Thanks for sharing.
Nice model, enjoy your techniques. You have a great workshop as well.
Turned out really nice. Thanks for all the work and upload.
Sweet build! Great job.
All your weathering is superb!
That is crazy good! Hats off for such a detailed job.
Well done!
Great job and nice weathering effect really enjoy this video and learn your prefect technic thanks for sharing 👏🏻👏🏻👏🏻😀
Before watching your amazing videos, I was thinking, well now that I’m retired I’ll build some cool WW2 models....rethinking that whole idea now!
Lots of talent
Great build Dawid 👌😎 Looking forward to the video’s of the dio’s
Great build, thank you :)
I AM GRAVITATE TO U-BOATS , AND SOVIET FIGHTERS , RATHER THAN ARMOUR , HOWEVER I MUST ADMIT THIS HANOMAG IS " ONE , FINE , BUILD ! LOOKS LIKE MUSEUM QUALITY SIR !
Stunning - congratulations! Happy New Year!
Great work!!
Very nice paint/weathering job, love it
My respect! Hats off!
Not sure how I missed the upload (of course I am as Im always working lol) but I've been really excited for this one since the pic you uploaded! Thank you!
Another great video and build, thank you and carry on with your great work 😁
Absolutely stunning. Congratulations.
Love the details even the weapons!
Why isn't the hairspray applied directly from the can if both ways you are spraying the model. Does the sirbrush j ur st give more control over it,?
Exactly :)
Amazing
NICE! more please. Love the armour!
Wow great job!!!!!
Thank you
Nice work mate!!
Very nice work!👍👍👍 I think I will buy that kit!😃
Crackin build Dawid
😁👌
Awesome work. 👍🏻👍🏻
Another fantastic job!
Piękna praca i taki sam efekt końcowy, ale nikt przy zdrowych zmysłach nie umieścił by w taki sposób granatów, nawet doceniając wszechobecne olewactwo żołnierzy. Taka tam uwaga
Gdyby nie to ze faktycznie widzialem tak usadzonych kilka granatow gdzies na zdjeciu, to nawet bym na to nie wpadl :)
How thin should paints be to put in airbrush?? Because I’m having trouble finding the right ratio.
well, its something you really need to figure out yourself to be honest. Too thick its where aibrush splashes a dots of paint, too thin and its gonna over flow, you need to find a right balance. Try to spray it not on your model first but on some spare parts or styrene strip/sheet and see how it goes, than add more thinner or more paint and see how it goes
Thanks for the advice
🏅❤🥰❤I love it 🥰❤🥰🏅
Jak patrzę teraz na ten filmik to mam ochotę coś już sklejac i malować najlepiej teraz 😁👍
Wyszedł super 🏅🏅🏅🏅🏅🏅🏅🥰
😘
Good!
*Nice german hal-track, 1/48 scale isn't my favorite but Tamiya provides such good kits ... 👏*
You definitely got the brushes you use at 9:52 from Amazon
I have those same brushes
I got the on ebay 🙃 i dont buy on amazon :p
Super robota! :)
dzieki
very very nice! may I ask you if you can record a video dedicated to the correct way to use Modellers World Weathering products? I have both washes and pigments but resulted into very bad results. It would be great if you can provide the correct information on the way to apply them over the colored surfaces, how remove the excess etc etc.
The pigments are like any other pigments, the problem with wash however, is that you really need to shake it well to the right consistency and need to shake or stir it from time to time during your work otherwise its gonna be too thin. I found them a bit hard to use on panel lines, but great for creating some flat stains.
@@ScaleHangar182 thanks for your answer! In reality I had several issues with their washes. Eventually I used the wrong clear. I tried with aclad gloss and totally ruined a nice F-84. may I ask you what clear you use to seal the model properly? Thanks!
Very nice🤓
Wow love it, I think the snow effect is perfect. Please say your doing a diorama got this masterpiece
Yes this one is going on diorama :)
Scale Hangar 182 , yey
Just ... wow!
Nice work I was wondering if you can a tank from Zvezda.
Isn't 1/48 scale too small ? Compared to 1/35 scale tanks, Armoured vehicles?
Yes its quite smaller
It would be awesome if you make f-18 for the next project!
i build Zvezda 1/35 kit
Looks pretty good other than the one crooked decal on the side and pristine looking decals all around . To me they really stand out and detract from the overall model. From what I have seen on your other builds and the quality of them this one was a little underwhelming and seemed rushed.
👎 meeh...
You should just stick to your model video’s instead of aggressively attacking a modeling company and it’s customer base and forcing your opinions on others. This used to be one of my favorite channels.....un-subbed from your channel and unfollowed on your Facebook page.
I stick to whatever i want on my channel, and if you support what they are doing, im glad you unsubscribed.
Scale Hangar 182 it was the arrogance you displayed. The same arrogance in your comment towards me just now. Don’t forget to leave another comment after this one. Remember it’s important to have the last word...... cheers
@silverstacks Company has used pictures of real people what was really nasty. Everyone, who has knowledge about war and atrocities what has been done to other people, should know it's not good way to promote own products by using pain and suffering of other people. If you do it, you are heartless sadist
As far as i know, arrogance means that i behave like im more important than others you probably mistaken simple arrogance wit self-confidence, this is scale modelling channel and scale modelling brand just did something really bad and instead of apology, they worsten and i have rights to express my own opinion that i shared. You calling me an arrogant like a bit dictator, telling me what to do and and refuse to listen to my opinions. And again no one wants to see you go on a virtual world tour saying goodbye
Scale Hangar 182 LOL 😆 cheers
Amazing