VSA Switch Test
Вставка
- Опубліковано 17 кві 2019
- A quick video showing how to test the VSA (vehicle stability assist) switch from a 2006 Acura TL.
► Subscribe: / carsntoys
►► Tools and Supplies:
Alligator Clips: amzn.to/2AQot3H
Multi-Meter: amzn.to/2KOdFZD
Safety Glasses: amzn.to/2BQKZ05
Trim Removal Tool Set: amzn.to/32QMx3p
►►►Turn off VSA Light for Good:
• How To Turn Off VSA Li...
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
#vsa #vsalight - Авто та транспорт
Thanks bud. Having this same issue. I push the button and the light does not go off. I am gonna pull the switch tomorrow and test. I just got a 2004 Tl 3.2 6 speed and a lot of your videos have been very helpful. Thank you.
Glad to help.
Read my suggestion maybe it will help you.
I turned the vsa triangle out be shorting pin 9 on the obd port when mine wouldn't go out
How do you determine which pins to test? My 2006 Acura VSA switch is different. Rather than 1 row of 5 pins, mine has 2 rows of pins (9 pins total).
My car only has the vsa button on, what can the cause be? It turned on by it's self and can't turn it off
Neutral memorization I think it's called it's in a foxwell scanner
You didn’t show us what the multimeter was showing when you connected it. How are we supposed to know if the switch is good or not?
The sound sir. Silence means it doesn’t work. Sound means it does.
For starters you don't just push it you have to push it hold it for a second then the little warning sign comes up
So how do you put it off
@@dopamumonday4617same thing
Is the button suppose to make a click sound when pressing?
Nop, just slides in and out without a clicking sound...
@@quirinonavarro1857 when I push it I get the Little triangle isn't it supposed to say VSA off when you push it???
I uses to have that problem and i resolved real simple. With a needle i suck all the break fluid from the bottle container, clean real good the dirt and the oil level indicator. Put new fluid back and that resolved my 2 problems. The triangle and the break light like if you had the emergency break on. Hopefully this can help you guys.
what year is your Tl , Did you lose power when the vsa light comes on ..
@@emilwilliams8436 my is a 04. And no my car ran normal and if it did I will not knowed because I drive it like a girl. Why your lose power ?
Bolillo Ponce yes I lose power and I am stuck in 3rd gear
@@emilwilliams8436 waooooooo
I think other than SVA you have tranny problem. Or you can have the problem I had one time that my catalytic got dirty and yes I lost power in that.
@@emilwilliams8436 If your losing power you might need a new Accelerator pedal position sensor (APP Sensor) I was having that issue...Once I replaced it the issue was gone.
this switch is seldom used, how can it have problem?
Hey man I got the same problem and I changed the bearing plus the speed sensor and my light of the vsa and abs still on
This will help - ua-cam.com/video/AjoY3yQg_ZQ/v-deo.html
It is possible to repair VSA switch
Tengo un Honda CR-V 08 y no sé si funciona por que lo toco y no enciende nada
Can someone explain what the VSA switch is used for? What is that? What does VSA stand for????
Vehicle Stability Assist. It helps the car to stay in a straight line in slippery conditions, or during a quick change of direction maneuver, like trying to evade a sudden obstacle in front of you. It applies the rear wheels breaks, independently, to help the car turn more easily. It uses some of the same sensors that the ABS system uses, but additionally it uses other sensors that measure the posture of the vehicle relative to its movement. Almost all cars have them now, because it is good at helping to keep the control of the vehicle at higher speeds, thus avoiding a lot of single vehicle accidents, but it really is only some additional lines of code in the ABS system, so it is not very expensive to make.
I have a 2007 honda element sc. I need to know if the button clicks and stays down like the cruise control button when pressed. My vsa button does not stay depressed down. It just springs back.
My 2001 acura does the same thing after I had my upper control arm replaced.Did you fix your vsa light problem?
@@glenhesketh1 nope. Replaced the one wheel sensor that the wire was ripped out and went through the process of the reset 50 times. Checked the master cylinder plug which some say is the issue. Nothing. Gave up. Frustrating as hell.
Thank you
I just reset my triangle light. Came on months before the vsa light and abs light. Got the abs fixed which fixed the vsa but the traction control triangle light was still on. Found a vid on UA-cam where you short pin 9 to ground and push the vsa button .
CharlietoKind linkk please
YaaBoyyJayJay ua-cam.com/video/3f11x3XGRns/v-deo.html skip to the second part of the vid
CharlietoKind what kind of car do u have
YaaBoyyJayJay 07 odyssey
Hey guys I got a 2006 Honda Odyssey touring model I have a recall on my fuel pump strainer how old how will the dealer try to rob me in Spanish
vsa= traction control?
Vehicle stability assist
Whatever the hell that means
The video was very helpful, but I replaced the switch with a new one from a dealer and the light still didn't go out. Must be something else.
Most likely will need to reset the steering angle sensor. I'll have something shortly. My light is still on, too.
Read my suggestion maybe it will help you.
this video is busy monky work for nothing. Need scanner to read your VSA switch status.
Will it affect the vehicle in anyway if we just leave it on and you continue driving with it in
what is vsa....somebody
Vehicle stability assist (traction control)
Does it have to be turned ON or OFF? And what exactly is it for?
It's for stability control; in other words traction if the tires slip. Keep it on.
So does that mean I don’t have to turn it on because all I ever do is drive it to work and back home
@@dircxx8554 I left it off
Did you ever figure what was wrong iam having same issue with my 2008 acura tsx.
Yes, I have a very good idea what's wrong with it. Long story short, the scan tool I'm using isn't doing its job and resetting the VSA. I'm currently working with the manufacturer for a solution. Nonetheless, I'll have something very shortly.
@@CarsNToysAlright sounds good maybe my scanner is the same way ill try a different one as well.
The scanner is only going to tell you that your switch is bad but it's not. It's dirty. Read my suggestion maybe it will help you.
@@dientefrio69 will do that thanks a lot
@@Eldela5.0 no problem. Like i said it work for me. It was getting me mad to get in the car and see a Christmas tree in the dash. Hopefully it works for you. Let me know.
Can still drive my acura with the warning ⚠️
With the VSA symbol on? Yes you can. However, the system is inoperable until it is repaired. Here's how - ua-cam.com/video/AjoY3yQg_ZQ/v-deo.html
@@CarsNToys Performed that video with a FoxwellNT630Plus with no success. Perhaps the OBD port has a broken wire/pin somewhere. My car is a 2012 Acura TSX SE & its problem is the VSA. Keep on reading your comments - they are very informative.
@@CarsNToys when I push it in mine brings up the warning symbol but no words is it supposed to say VSA off? Also does that mean that my all-wheel drive will not work?
You could have gave them, more accurate information. You forgot to tell them EVERYTHING else. 😂🤣😂😂🤣🤣😂😂