Restoration Engine HONDA GX160 | Restore Engine Honda Rusty
Вставка
- Опубліковано 6 вер 2024
- Restoration Engine HONDA GX160 | Restore Engine Honda Rusty
The Engine we encountered this time was old and very rusty. It has lost its carburetor. After taking out inspection inside the engine we found the exhaust valve was almost stuck, We re-polished it and tried to recover everything to the best.
The Restorator thank you once again for your interest and support.
Dear Mr/Ms
Thank you very much for your value time to Watch,Like,Comment,Share and Subscribe our videos on The Restoration Channel, and we will try all our best to find more idea as try to Create more videos to make your assist and more facilities.
If you have any idea or more convenience to support us please don't hesitate to contact with us ! i apologize for the mistake if I made this recovery!!!
لوعايز اعمل للمتور ده عمره
Impecable trabajo, como siempre!. Saludos!. 🇺🇾🇻🇳
Semua akan indah pada waktu nya .... Smangat bro....
Waiting for next video
The hammer still the mechanics best friend!!!
คลิปดีน้ะแต่..เคียงเล็บมากกก
excelente video cuando veo tus video me motivo comprar un motor y restaurarlo
Muy buena esta primera parte del video de Restauración Motor HONDA GX160, a esperar el armado y puesta en funcionamiento, mis respetos y saludos desde Venezuela.
What is the white solution you place parts in?
можно было смотреть до момента когда он наждачкой начал скрести стенки цилиндра 🤦♂️🤦♂️🤦♂️
Я в ахтунге был!
Please get a Sand Blaster to make your task more easier.
Kênh này của việt nam hay người nước ngoài làm vậy ?
Good 👍👍
В России, ржавчина надёжней)
please next part 2
Muy buen video saludos abrazo grande desde Argentina
Trabalho maravilhoso parabéns.
Awesome video
I was working on one in high school but we didn’t have the parts so we gave up and I started working on a Briggs and Stratton flat head
Buddy the best penetrating oil i have ever used is break fluid in a small spray bottle, Its cheap and work great!!!
Parabens pelo seu trabalho.
Я так понял что фокус с наждачкой не удался раз не показано как завёл он его. Зато покрасил)). И по ходу кому то впарил.
Но раз умеет красить, то впарить уже само собой. КРАСАВА !
Kalau boleh tahu, itu cairan apa yang berwarna putih untuk merendam mesin di wadah merah? 🙏
💕💕💕💕💕💕💕💕💕💕💕💕💕💕❤️❤️❤️❤️❤️
Not criticism, but i hope that in part 2 that you hone the cylinder and replace the bearings. These are two critical parts to repairing an engine. The more care that you put into an engine, the better it will run.
Well by the looks of this one u have your work cut out for ya.
Yet another one we don’t get to see the end of.
𝚅𝚎𝚛𝚢 𝚌𝚘𝚘𝚕
Muito bom! 👏👏
при помощи кувалды и какой то матери почти по русски
Looks like rings are faulty. I hope you installed new rings kit.
Наждачной бумагой цилиндр шлифовал, это п с д ц!!!
Как бутто мы делаем по другому. И что самое интересное мы ЭТО покупаем в сети магазинов! БЛ..ТЬ!
hello baby
can you restore car engine?
When's the second part coming out dying to see the second part and again what do you have for a chemical in that red bin that strips rust
think its a diluted acid bath
Guaranteed to run for 5k.
Looks like a GX270 and not a GX160 as i have 2 gx160's both vertical and horizontal.
Wow
Did not like. It wasn't until the end.
👍👍👍
That dude needs to cut his thumb finger nails holy fuck those are potential weapons
💚💚
7:21 c’est moi ou il essaye de dévisser une soupape ?
Pierwszy
❤️🇮🇶
🇪🇨👍🏻
Ya gene tırnaklarını kesmemişsin eldiven tak bari, hoş eldivende delinir ya o tırnaklara bişi dayanmaz bu işleri yapıyorsun bide hep içi pislik dolar nası duruyorsun öyle anlamış değilim bizde aşağı yukarı aynı işi yapıyoruz işine bari saygın oldun..
Блять, этот ноготь…
Terrible music choice.
Cut your fricking finger nails, that's disguisting
You are soo skinny