It's not a GX35 engine because it has pushrods, it's either a GX22 or a GX31 engine. I repaired my fathers GX35 engine which is an overhead cam engine because it stopped running on him,the inlet valve had carbon buildup on it so I merely pulled it apart, cleaned the valves up then reassembled the engine using the original 17 year old piston rings,it hasn't missed a beat since !
Algunos hombres somos así no aguantamos pasar cerca de la basura sin hechar un vistazo por si hay chatarra que se pueda recuperar y restaurar.😂😂😂 Exelente trabajo campeón..!!!👏👏👏👍👍👍
Otro claro ejemplo de su don en la restauracion, esta ves le toco a este antiguo motor HONDA GX35 de 4 tiempos, con un resultado excelente, saludos y mis respetos desde Venezuela amigo.
Well nice job on the restoration, just a couple of suggestions. When you paint an engine use masking tape on all internal surfaces, Don’t paint piston chamber, check the piston for right size. Change the pull starter. Otherwise nice job, keep them coming, don’t listen to criticism the people making the remarks couldn’t do what you do anyway.
How many times are they going to use this scenario , I'm just walking down by the rice patties and I happen to find an engine. LMAO people are so gullible
That's amazing. I could do this except for putting the damn thing back together !!!!!!!!! I could not remember how it goes back together. That's the key to the entire rebuild. Your an AMAZING person to be able to get something laying on the side of the road and resurrect it.
Owen Webb, I agree with you completely! The opening shots are beautiful, but the finding of the engine just seems very uneccesary. Thank you for a good comment. Sincerely, Alicia from Sweden.
Для человека, который в движках не разбирается, это может быть и выглядит красиво, а для инженера-механика по двигателям внутреннего сгорания скажу - руки надо отрывать таким "реставраторам". Или делайте по уму или не беритесь вообще! Мне хватило того, что коленвал в сборе с шатуном, поршнем и кольцами просто помыл в черной жиже без разборки...
i love seeing you recycle :) ... only thing i disagree with is you paint inside motor areas as well , over a short time that paint will come off and gum up parts ... i know from mistakes i made as well ... better to just clean up and tape off area you dont want paint on for a long motor life :) ... keep up the good work
or maybe they have the skills and they know that painting a valve guide for example it's a very bad move, such as other things he did and the may just wanna warn others this is not how you have to work if you want the stuff you rebuild to last over a couple weeks.
NIce work ! Bu look out : never paint on the engine ball bearings, neither on the gasket lines ! And the paint on the plastic fuel tank - especially on his cap - its lifespan is very very short.
Вот мне подарили gx-35, люди не знали, что туда масло заливается, много лет она даже прожила, пока не заклинила. Разобрал, как смог надфилями убрал задиры с ЦПГ, ничего, теперь работает.
It's not a GX35 engine because it has pushrods, it's either a GX22 or a GX31 engine.
I repaired my fathers GX35 engine which is an overhead cam engine because it stopped running on him,the inlet valve had carbon buildup on it so I merely pulled it apart, cleaned the valves up then reassembled the engine using the original 17 year old piston rings,it hasn't missed a beat since !
This type engines are not reliable. Materials are poor in quality
One thing that is reliable in the world is a Honda motor.
Top job.
Algunos hombres somos así no aguantamos pasar cerca de la basura sin hechar un vistazo por si hay chatarra que se pueda recuperar y restaurar.😂😂😂 Exelente trabajo campeón..!!!👏👏👏👍👍👍
Cảm ơn em đã cho anh xem clip này
good sakil
Thank bro!
Otro claro ejemplo de su don en la restauracion, esta ves le toco a este antiguo motor HONDA GX35 de 4 tiempos, con un resultado excelente, saludos y mis respetos desde Venezuela amigo.
Thank bro! Thank bro!
Great quality components used and amazing DIY product build 😍👍👍👍 i LOVE YOU ALL :)))
Sửa máy này là máy gì chả nói cụ thể thì ai mà biết đây là máy có công dụng trong sản xuất hay chỉ là cái máy đồ chơi của trẻ con thôi.
Thank bro!
Very good!!! Congratulations my friend 👍👏👏👏. Hi from Brazil 🇧🇷👍
Well nice job on the restoration, just a couple of suggestions. When you paint an engine use masking tape on all internal surfaces, Don’t paint piston chamber, check the piston for right size. Change the pull starter. Otherwise nice job, keep them coming, don’t listen to criticism the people making the remarks couldn’t do what you do anyway.
Привет из Америки 🎬🛠🇺🇸
Thank bro!
How many times are they going to use this scenario , I'm just walking down by the rice patties and I happen to find an engine. LMAO people are so gullible
Happens to me all the time
O
O.oo.o
o
Iuo..
Fckn HaterVision Switch Is On
Get The Broom Stick Out Your Ass My Dude
Jajaj exactly
Well look likes it's been a culture for them... And you cannot do anything about it.. Do you?
I love the thumbnail!
good job bro!
Thank bro!
Semangat terus bro 👍👍,sangt memotivasi
Belas as paisagens da sua terra, do seu país. Parabéns pelo seu talento de restaurar. 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 Brasil.
Я даже видео не стану до конца смотреть- он там почистил всё, покрасил и собрал заново))
Доктор Дью глянь там есть пару видосов как он разаблочил всратого рестовратора, я там ржал пиздец
Good job bro
Việt nam mình giỏi lắm
Thank Bro!
Baguss BOSS👍👍
Great job
Thank bro!
My friend is beautiful
เก่งมากครับ
Thank bro!
I like the background music isn't overpowering the video. Nicely done
Thank bro!
Ở đâu mà giàu có quá dậy máy móc mà bỏ ngoài bãi rác vậy. Đúng là nơi giàu có, có khác
Good job beautiful restauration and nice work
Thank Bro!
That was the most backyard paint job I've ever seen. Who even needs to mask off the engine, sand down surfaces, or remove stickers?
Thank bro!
Việt Nam à chú
12:05,
why did you paint the valve seat? you will have problems with this engine in the future : /
Holy shit that thing nailed he has no clue of engines he painted the sealsides
@@tonydetwiler2624 I wondered if any body else notice that
Sei un grande. Bravissimo.
thank bro!
Ok, engine is alive again, great job!!
Thank bro!
Amazing work! Thank you!
That's amazing. I could do this except for putting the damn thing back together !!!!!!!!!
I could not remember how it goes back together.
That's the key to the entire rebuild.
Your an AMAZING person to be able to get something laying on the side of the road and resurrect it.
Everyone with 3 brain cells can do that
Parabéns pela restauração, são vendidas?
Wait... Did he seriously just paint the inside of the engine without taping anything off?!?
Excelente trabalho parabéns.
wow you're good job👍✌️
Great job sir ... 👍
Thank bro!
Nice Job. Very Well Done.
Thank you for sharing your experience
Thank bro!
Very nice
Find objects in random places is unnecessary. They clearly are planted. I don’t get this culture in restoration videos.
We value these restoration video a lot.
Awesome skill that man has.
Owen Webb, I agree with you completely! The opening shots are beautiful, but the finding of the engine just seems very uneccesary. Thank you for a good comment.
Sincerely,
Alicia from Sweden.
I feel like in his country it's probably not that difficult to find an old moped engine, they're probably tripping over them often.
Obvious question, why was it tossed out, most engines are junked for good reason.
Es todo un arte ..congratulations me friend.....is greatfull...
Smart 😊
I see great things from you
Thank bro!
Awesome work bro....
Thank bro!
Very good boy
u my friend r a fricking genuies keep up the good work
Thank bro1
Trabalho maravilhoso parabéns.
good job
Parabéns meu irmão.
2 👍’s up and a like!
Thank bro!
@@therestorator7215 good videos are worth hi praise.
Awesome 😎
Daqui no Brasil essa mão de obra se chama meia sola e ai no país de vcs?
Wow Amazing🤣👍
Для человека, который в движках не разбирается, это может быть и выглядит красиво, а для инженера-механика по двигателям внутреннего сгорания скажу - руки надо отрывать таким "реставраторам". Или делайте по уму или не беритесь вообще! Мне хватило того, что коленвал в сборе с шатуном, поршнем и кольцами просто помыл в черной жиже без разборки...
Thank Bro!
... patience, experience and knowledge, well done Bro!
Thank bro!
คนไทยป่าวคับ
good job bro my friend!
thank bro!
Aún quedan mecánicos y no cambia piezas como muchos.
Sensational congratulations
причём он намеренно старит вещи, за месяц забрасывает куда то в мусор, измазывает грязью, что потом "случайно" найти
Ну судя по ржавчине и как клапан закоксился то как то странно думать что специально так делает
Thank bro!
Опускает в перекись и за сутки такой мотор готов ржавый и окисленный.
Негативные комментарии только от жителей России... Стремно читать...
@@avadaedavra3476 Так хули ты читаешь? Негативные комменты от жителей В России не читай хули читаешь то?
seperti sinetron Indosiar, naskahnya kurang tajam tapi bikin ketawa.
Good job bro 👍👍
i love seeing you recycle :) ... only thing i disagree with is you paint inside motor areas as well , over a short time that paint will come off and gum up parts ... i know from mistakes i made as well ... better to just clean up and tape off area you dont want paint on for a long motor life :) ... keep up the good work
Thank bro!
Those valve springs - not suitable.
In my limited experience fixing stuff, bolts NEVER break free that easily from something so corroded....
Pb blaster
v
Well made video's entertaining
Thank bro!
Good. Job bro
Thank bro!
Era un chingón de chingones mis respetos a todo le sabes
Thank bro!
All the ppl who judge this guy on his vids are just jealous that they do not have the skills to do what he does
Thank Bro!
or maybe they have the skills and they know that painting a valve guide for example it's a very bad move, such as other things he did and the may just wanna warn others this is not how you have to work if you want the stuff you rebuild to last over a couple weeks.
He: i dont care about corona virus but i will make video by taking things from garbage.. 😂
Virut corona???
great job man ♥
nice job!
have you put some oil in the engine?
,Amigo,muy bueno limpieza y pintado,me gustaría en mecánica,que cambió Ej.aros pistón,retenes,carburador ete.Un saludo desde Argentina.
Hi, Thank bro!
Adóro esses episódios tmj.
Thank bro!
Tiny springs...I see valve float in ye future!
Its not everyday that you find a discarded engine in your backyard/dump site.
Открывай уже реставрацкую мастерскую в своей деревне
Brawo 👍👍🇵🇱
Nice
Uh, they don't spray paint engines at the factory...
Amazing did start!!
😍😍😍👍👍👍👍👍👍
Thank bro!
Next up a restoration of a nail cliper
it's not gx35 because it has pushers, it's gx 31
Thanh niên Việt Nam 😂😂😂😂
何のエンジンか判らないが、凄いって事だけはわかる希ガス
The discovery scene distracts from the restoration. But overall, good job
Thank bro!
Excelente gracias
Thank bro!
They always manage finding rusty engines and staffs In marshes or paddy fields
Hahaha the pull starter at the end broke
NIce work !
Bu look out : never paint on the engine ball bearings, neither on the gasket lines ! And the paint on the plastic fuel tank - especially on his cap - its lifespan is very very short.
최고 👌🏻👌🏻👌🏻
👏🏻😁😷⬅️👍🏻🥰 like ✅ aki 👈🙏👏🏻
Если прикрутил сцепление, то и колокол прикрути, а то кулачки разлетятся когда заведется.
Yes, I had to remove them on the following boots
@@therestorator7215 А Вы на русском понимаете что ли? А в какой стране вы?
Опять "случайно" нашёл!
Thank bro!
Кто разгружать белаз лойсов.
Thank bro!
Вот мне подарили gx-35, люди не знали, что туда масло заливается, много лет она даже прожила, пока не заклинила.
Разобрал, как смог надфилями убрал задиры с ЦПГ, ничего, теперь работает.
Fácil....muito facil
What is black colored water?
Are the broken things restorated in your country always stolling in the garden?