2019 RAM 1500 Interior Lighting | Interior LED Lighting Install
Вставка
- Опубліковано 26 сер 2024
- Complete guide for installing interior led lighting on the 2019 ram 1500 5th gen. This video goes in detail how to install vanity lights, foot well lights, map lights, glove box light, and the cargo light! I hope you can use this video as a guide, if you'd like to install led lighting into the interior of your RAM 1500! Please give it a like if you found it even a little helpful, and consider subscribing for more videos!
-----------------------------------------------------------
Fyre Flys 15 Piece 6000K White LED Interior Lights:
LED Lights: amzn.to/2Cr6p10
-----------------------------------------------------------
Timestamps for each process:
Vanity lights: 0:43
Foot well lights: 2:54
Dome lights: 4:22
Map lights: 4:57
Glove box light: 8:20
Cargo light: 10:54
|| Music Credit ||
Dreams by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/2PhjK3H
Music promoted by Audio Library • Video
--------------------------------------------------------------------------------------------------------
Great Days by Joakim Karud / joakimkarud
Music promoted by Audio Library • Great Days - Joakim Ka...
--------------------------------------------------------------------------------------------------------
Road Trip by Joakim Karud / joakimkarud
Music promoted by Audio Library • Video
If your looking for specific interior bulb replacement I have timestamps located in the description. Be sure to check them out!
I have a 22 Ram. Was so mad the interior of the truck was so dark. I bought a couple boxes of those fenderwell lights and replaced the under dash lights with 1 ea per side. Under the rear seat i have a Du-Ha organizer and I mounted 4 of those lights across the front. World of difference!!!
Squeezing the prongs was the help needed for my 2017 RAM Rebel, you saved me from returning the LEDs i ordered. Thank You
Awesome! Glad this video could be helpful for your 2017 RAM also!
Bought this product but returning them on the first day, Dome light does turn on when the door is opened however you can no longer control them w/ switch. Map light has the same issue, thank god I tested them before putting them back up, so I don't have to worry about doing them again. For any of you having trouble removing the overhead console, I highly recommend watching those lasfit videos which includes much more details. Even if you are not gonna purchase their products, it makes the disassembling and installation process much much easier!
Damn that’s such a waste of time…
Glad I hadn’t bought any. Looks way harder then my 4th gen
Nice! Don't know if I'd want to go through all that though.
Got the same kit and did every bulb on the truck In the time it took you take apart the maplight assembly lmao! Thanks for the video tho!
Models with the sunroof have a different map Light setup. Just learned the hard way lol thanks for the vid!
BEST VIDEO I’VE SEEN ALL NIGHT ON THIS…. HEY I KNOW THE ONE BULBS ARE 29MM WHAT SIZE ARE THE GLOBE SHAPED ONES?
Thanks for the great video! (Lafayette, LA)
Thanks bro, very helpful video and looks good.
No problem! Glad it was helpful!
Are those bulbs still lighting without flickering??????
Very informative video. I have the Limited model so there are several LED's already in the interior. What I'd like to know is there a kit available on the market for specific areas where you want to install LED's or do you just order the kit and just replace the one's desired ? Not sure why Ram would install LEDs in the cargo box area but regular filament bulbs by the high mounted third brake light. Also, is there an installation for under the hood ?
Thank you very much! This video was very helpful! But damn those vanity mirror lights to blindingly bright. I had to turn those leds 90degrees.
Glad to hear it was helpful!
You sir, earned yourself a subscriber. 👍 very informative video. Appreciate it brother.
Thank you! I’m glad it was helpful!
got these for the 2021 ram, only was able to change one of the map lights with this kit, driver side wouldn't go out, had to put original back in?!
any ideas
How is the interior lighting holding up so far?
Great Vid dude. Im going to do mine soon.
AzN TxN thanks! I appreciate that! Hopefully it was informative enough to help you avoid any mistakes or issues!
So i bought the kit that you got and the license plate bulbs werent the same as what was there didnt feel comfortable using those, also my interior lights wont turn on when i unlock or open the door but once i put the key in they turn on, any ideas anyone?
Very useful thanks
You’re welcome!
Any issues with leaking in the third taillight (inside)since you broke the proverbial, mystical and magical seal from the factory? (LOL)
No leaking that I’ve noticed! All seems to be good!
I was wondering if they have a kit like this for a 2013 ram or will this fit it
I’m not sure if there are since I’m not familiar with the previous generation ram. But you may be able to find one on Amazon. That is where I got mine.
What was the bulb number that was used for the UNDERSIDE of the driver’s and passenger’s side? Thanks
If you don’t have the number can you send me a picture or a link for where you got the kit? Thanks again.
Sorry to get back to your comment so late! But I think the bulb size is a “T10” for the footwell lighting. And the link to the kit i bought is in the description of the video. Hope that helps!
nice... are the 2 bulbs cargo bed (your bonus cargo lights) included in the Fyre Flys 15-piece package?
sundayduffer they were! Every bulb I installed was included in the package!
@@abes8867 yup.. just finished installing all but engine one...easy peasy..even the map one..took me 15 mins to install all of them. Thx for your video though, it helped me prepared. Cheers!!!!
sundayduffer no problem! Glad my video was helpful for you! 😁
How do you replace the light in the bighorn box above glove box
Check one of my first comments down at the bottom. I replied to a comment on how to get to it! Hope that helps!
My switch to activate all lights isnt working now? Do you know why?
Daniel Garcia I don’t know what your exact issue may be. But a place to start would be to check and make sure that all your bulbs were put in so that the polarity is correct. If that doesn’t work. Then check your fuses, to see if one as blown. And if that doesn’t work, a third thing to check is to make sure the plugs are all the way in on the overhead unit if you followed the process I had in my video. I hope that helps!
Im having a different issue where when i unlock the doors or open the door they dont turn nor the switch but once i put the key in they turn on
Did you figure your issue out?
Thanks for the video BUT this is way too complicated brother just pry the clear pieces and wrap a zip tie around the bulbs and pull them out. I did that on mine.
where did you get the led vanity light bulbs from?
PLEASE HELP !!
I got them off of Amazon. Link should be in the description.
Have u had any lights flickering with this brand? Also does it still function like stock where you open the door and all the interior lights still shine? Heard stories of aftermarket lights disabling this function that when you open doors they won’t turn on, only when doors are closed and u click interior light button
The only one I had issues with was the driver side map light. But I think it’s due to the bulb not being seated properly. I haven’t had a chance to investigate it. But after the install the the lights worked just like they did with the factory bulbs. The lights come on when the doors open. Hope that was helpful!
Thx for the reply!
Have you had any issues with flickering or Bulb out errors with these leds?
No issues so far!
Mine did start to flicker as well after a year or so.
Great video man. You got one for the exterior lights?
Thanks! Glad it was helpful. I do not have a video for the exterior lights unfortunately. My truck came with the exterior LED package. They perform well so I don’t have a need to change them out.
Just finished installing these lights on my 19 ram 1500 big horn anyone have any idea where the bulb for the engine is supposed to go? I'm gonna take a wild guess and say somewhere in the engine just not sure exactly where
I may be wrong, but I think there are some models that did not come with an engine bay light. But if there was, my guess would be on the underside of the hood.
@@abes8867 ok thanks. Also really helpful vid nice work.
@@sethwerzberger478 no problem! I’m I’m glad this video was helpful for you!
The map light covers don't come off without pulling that whole console off?
The covers do come off. I didn't think I'd be able to get my fingers in there to grab the bulb. So this was the process I took. If your able to get to the bulbs just fine, I don't see any reason why you couldn't replace the bulbs without taking the whole console off.
@@abes8867 Those bulbs can be a bugger to get out. Easiest way is to wrap a zip tie around them and pull them out. No need to pull the console
R Kranz awesome! Thanks for the advice! Hopefully others will see this comment, and I’ll try this method if I have to replace them!
is it easy to remove the sun visor, to replace it or to remove the warning stickers e.g.
Sorry for the late response! I am not sure, since I haven’t taken them off before. But they don’t look like they’d be too difficult to remove.
Ooooo
you forgot one!!!!!! the glove box above the glove box
You're right! Good catch. The glove box above the glove box in my truck already has a "pure white" light in it, almost like it already has an LED bulb. So I didn't feel the need to change it.
Abe S how would you change it if you wanted to? Do you just pry it downward till it pops off or is there a trick to it? Thanks
Ish M When you open the top glove box, you’ll want to look between the door and the top of the glove box itself. Bend the top of the glove box on down a little and you’ll see the light fixture. On the light fixture itself there is a clip on the right side of it. You’ll need like a flat head to press that clip left towards the driver side and apply downward pressure at the same time. Pry the whole fixture out and then you should have access to it. I hope that was helpful! Be careful, and do this at your own risk! Good luck!
Why did you write “install at your own risk” in an inconspicuous corner of the screen for like half a second lol
Mike Juliet lol cause I don’t claim to be an expert just wanting to help others. But should you follow this install, it’s on their own ability to do so, should a problem arise like an electrical short it’s at their own risk. Cheers!