Out With The Engine! | Ford Transit MK1 Custom Camper Van Project | Episode 3

Поділитися
Вставка
  • Опубліковано 16 вер 2024
  • It's time to pull the old V4 engine out for inspection and rebuild and send the chassis off to winter sleep. 👋❄️🐻😴
    See you in the spring! 🌿
    ⚡️Thanks for Watching!
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    ⚡️ Follow HappyDayGarage on social media 👇
    🔥
    👉 Facebook : / happydaygarage
    👉 Instagram : / happy_day_g. .
    No copyright infringement intended, all rights to the respectable owners.
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    #Ford #transit #camper #campervan #campervanlife #campervanbuild #oldschool #v4 #v4engine #essex #gearbox #restoration #mechanic #shifter #oldtimer #tomovinkovic #vinkovic #tractor #diy #tractorvideo #oldschoolford #fordtransit #fordtransitcustom #mk1 #hydraulic #fordheritage#heritage #clearance #struggles #oil #messy #happydaygarage
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

КОМЕНТАРІ • 40

  • @qwertylesh
    @qwertylesh Рік тому +3

    The production quality here was really good, to be fair all your videos are, you deserve (and I sincerely think you will have) a huge audience. I particularly enjoyed the switch to country music when you pulled out the tractor. This van will make a sick camper! nice job!!

  • @adamfaith2321
    @adamfaith2321 Рік тому

    I replaced a few of those V4 1970's Mk1 transit engines back in the 80's. I used to separate the engine from the gearbox first.

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +1

      That's a good choice of operation sequence! I will soon be putting it apart for inspection and restoration.

  • @cross13000
    @cross13000 Рік тому

    Great vid, thanks.

  • @austinmatthews347
    @austinmatthews347 10 місяців тому

    When i read the title i though whoa i hope he is saving the v4 and i thought maybe its getting a newer engine with more power after watching i am happy you intend to still use the rather unusual v4 engine good for you pal

    • @HappyDayGarage
      @HappyDayGarage  10 місяців тому

      I was attempting to keep the V4, but I'm really tempted to put a stronger 2.9L V6 in! It would certainly make driving more comfortable, especially with the van fully loaded.

  • @predragv.365
    @predragv.365 Рік тому

    Tomo Vinković help 😃😃

  • @kayfelix5054
    @kayfelix5054 Рік тому +2

    A little bit of information in front of the job would make your life way more easy. The parts for the essex engine are more difficult to find than the cologne engine. Outside of little britain

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +2

      It surely would, but there is just something special in discovering it by yourself! 😁 I hope there will not be too many parts to replace though.

  • @jamesgibson5606
    @jamesgibson5606 10 місяців тому

    Great series, the Transit is a mainstay for us Brits and all others who use them. The engine the transit was fitted with was the bullet proof V4 that had been used in the Ford Corsair in the mid sixties. Keep up the good work.

    • @HappyDayGarage
      @HappyDayGarage  10 місяців тому

      It seems as a bulletproof engine! Although the van being quite heavy, I am considering installing a Cologne 2.9 V6 instead.. To make it a little more eager to go uphill!

    • @drewdunlop7024
      @drewdunlop7024 19 днів тому

      Any progress on the Transit? Would love to know what you’ve decided to do engine wise

  • @chopperhehehe
    @chopperhehehe Рік тому

    Cracking show subed already hope more on transit
    👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕🦄😁🤞✌️

  • @TheDjmiros
    @TheDjmiros Рік тому

    Nice :}

  • @matthiashassler9762
    @matthiashassler9762 Рік тому

    Love your Videos... Waiting for the next Transit Video 😀 Greetings from Austria

  • @sjg4967
    @sjg4967 Рік тому +2

    Ha ha, it was not that I thought you were not strong enough, it was that I had thought that you too smart, then you took the gearbox cover off without an oil pan.... After getting warnings from the diff and the speedo.... I did say don't....

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +2

      Rookie mistake right there hehe

    • @chopperhehehe
      @chopperhehehe Рік тому

      Hahaha sj•3 my same thoughts so I second your comment
      👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕🦄😁🤞✌️

  • @adamwort7160
    @adamwort7160 Рік тому

    I've also got an early mk1 flat front in the uk I'm fitting a turbo di with 4 speed automatic but keeping it flat front, to do so. I've had to move the engine back cutting the bulkhead, put crush tubes in chassis for engine mounts, and that won't lift in between front crossmember and bulkhead so I have to remove axle lift engine box complete from below, it's been in and out 5 or 6 times to get Position correct, but it's now on its mounts bolted in, next problem is wiring because its epic pump, fly by wire & gearbox need info from pump to change gear

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +1

      I think the flat front looks nicer. There always seems to be lots of in-out action in real life custom builds, heh. Is that a 1.9 TDI you're dealing with?

    • @adamwort7160
      @adamwort7160 Рік тому

      @@HappyDayGarage no a transit mk5 turbo diesel 2.5 (banna type) engine with automatic gearbox

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +1

      That's a great option. I also wouldn't mind a diesel in mine, but I'm sure V4 will be pretty cool too. I'm actually thinking about turbocharging it.

    • @adamwort7160
      @adamwort7160 Рік тому +1

      @@HappyDayGarage V4 2000 be ok if you can find one

    • @sjg4967
      @sjg4967 Рік тому

      @@HappyDayGarage Get an lpg conversion and have it set up to provide the domestic gas as well. Cheapest way to drive and cheapest most space efficient way to cook/heat.

  • @MrDesalex
    @MrDesalex Рік тому +1

    Tomo didn't have a lot to say!

    • @HappyDayGarage
      @HappyDayGarage  Рік тому +1

      He's a hard worker. 😁

    • @chopperhehehe
      @chopperhehehe Рік тому

      He is deffo stronger than you lol
      Had me laffing
      👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕🦄😁🤞✌️

  • @arjojotadape
    @arjojotadape 10 місяців тому

    hey dude....super nice video!!!
    are you going to film the entire restoration process of this ford transit MK1?
    I wondered if a Volvo 2.3 engine would fit in it
    good luck
    gr. Arie

    • @HappyDayGarage
      @HappyDayGarage  10 місяців тому

      Thanks. That is the plan, yes. Everything is possible, it just depends how much money, time and effort you're willing to put in. I am actually considering installing a Cologne 2.9 V6 engine in the van for some extra power.

    • @arjojotadape
      @arjojotadape 10 місяців тому

      when you use a a Volvo 2.3 engine, you can drive on LPG really cheap!

  • @HowHard42
    @HowHard42 Рік тому

    Love it, any updates on the transit coming? Building one myself so want to watch as much mk1 transit content as I can :)

    • @HappyDayGarage
      @HappyDayGarage  Рік тому

      That's the way to go! The Transit is in the waiting line at the moment, but I will be inspecting the V4 engine soon.
      Keep an eye for updates.

  • @JulieShuttler26
    @JulieShuttler26 7 місяців тому

    I love the colour of your transit, did you paint it yourself and what shade is it?

    • @HappyDayGarage
      @HappyDayGarage  7 місяців тому +1

      Glad you like it! It was like that when we got it, so I don't know the shade unfortunately.
      But we will be keeping it at least similar colour. 🙂

    • @JulieShuttler26
      @JulieShuttler26 7 місяців тому

      @@HappyDayGarage it's a great colour, shame you're not sure what it is, I've recently rescued a MK1 transit which someone has painted green but it was blue originally so trying to find a good blue 🙂

  • @joeedwards627
    @joeedwards627 11 місяців тому

    Got as far as watching you snap the manifold studs off and stopped watching