Quadzilla boost fooler install, it's the perfect time to do it now because you have a mechanical boost gauge and you can see the difference in the Boost readings at Full Throttle before and after, I gained about 10 psi of boost after the installation and not too expensive either.
No problem it still would be a great enhancement For a new turbo, remember the computer will cut off the Boost at around 25 or 30 PSI at least that's what happened on my 5.9 that would hinder the new turbos boost potential so the fooler will definitely help, by the way let us know what the full Boost on your truck is reading because if it's over 45 PSI then your tuner already has a fooler built in.
tsimmons1974ts thanks for the info man. My tuner doesn't have a boost fooler it tops out at like 35psi. After that I'll definitely be looking into one now. Thanks man.
I'm surprised a crayon eater was able to assemble all that! 🤪 Joking bro; great job once again. Can't wait to see your reaction after you upgrade your fuel injectors.
Nice Vid!! Even if it is a fiat er dodge. 🤘🏻🤘🏻🤘🏻 Major props for soldering some of your connections. That said, lil constructive criticism, you shouldve made them inline splices. Or where you have one feeding two or more use a combination of a pigtail and inline splice. Looks better and more conducive to clean install. Just be sure BOTH conductors counter wrap around each other (not just one wire wraped around the other). Also, shrink tube is cheap and looks much better. Also also, using an environmental Stakon er crimp connector is advisable if you cant/dont want to solder. Apologies , 25yrs as a Sparkee working for oem has jaded me. Good luck! Cheers!
Gauges look awesome. I was wondering how you likes the AMS oil in transmission? Was thinking of trying it, my 08 6.7 does fine on highway but pulling camper on steep back roads heats up over 200 with mag hytec and Lucas synthetic. Need to keep tranny temp down, any suggestions?
Another great video bro, love the gauges, I only have a boost gauge in with the srt 8 piller pod but use my edge insight 2 monitor for all my other gauges
AFG New Media man thank you for the comment. I will make a 30day review video for it. A few people mentioned to me they were skeptical about buying glowshift gauges but I love them they run good for me right now. I will release a 30day video about the review.! Thank you for the comment i appreciate it.
EVERYTHANG DIESEL No problem man I know how important interaction is and love the diesel community. I watch Greg A and Truck Master and Bertrand an JW Montoya all great guys and super helpful.
2 questions for you. Are the gauges the tinted 7 color? And, do your gauges face you? Mine face up and over towards the dome light. The pods are made at a terrible angle. It's as if they are made to face a 7 foot tall person sitting in the middle of the truck.
I just got the brace a while back and forgot to grease that barring. Do you know what grease to use exactly? I know there are about ten different ones and don’t want to ruin my investment. Also don’t worry the truck doesn’t move haha. It sit at my moms ranch.
Are your GlowShift gauges still holding up? Thinking about pulling the trigger on the A pillar set and really like how they look but have read a lot of bad reviews on them.
yeah look it up on ebay or amazon. i got mine from ebay. i paid 280. also glowshift has different lines of gauges mine are the basic type. the tow max ones with the digital display are like $400 something also.
For your fuel pressure gauge did you have to get a separate part to 90 it to put it away from the pump to fit the snubber on? Or does it screw into the brass fitting that comes on the air dog?
You know short cutting electrical will screw you up. I done mine myself with fuse taps and only 3 wires… all the wire jumping was and is unnecessary you got showing there. You can cut allot of that extra wire crap out
Quadzilla boost fooler install, it's the perfect time to do it now because you have a mechanical boost gauge and you can see the difference in the Boost readings at Full Throttle before and after, I gained about 10 psi of boost after the installation and not too expensive either.
i thought about doing it but since i planned on changing out the turbo i wasn't gonna do it but i think i will still. Thanks man.
No problem it still would be a great enhancement For a new turbo, remember the computer will cut off the Boost at around 25 or 30 PSI at least that's what happened on my 5.9 that would hinder the new turbos boost potential so the fooler will definitely help, by the way let us know what the full Boost on your truck is reading because if it's over 45 PSI then your tuner already has a fooler built in.
tsimmons1974ts thanks for the info man. My tuner doesn't have a boost fooler it tops out at like 35psi. After that I'll definitely be looking into one now. Thanks man.
I put all the bundles in the pillar and just ran the one wire from each color down so all u had to worry about was the four wires below the pillar
Man they look good the wiring look pretty simple too good video man
I just bought a 08 6.7. All I've ever owned is 12 valve trucks, going to try some of these mods myself. Thanks for the tips. Subscribed
TripleR Knives, guns, lawns, trucks, and cars your welcome man!! I hope my videos will be of assistance to you man! I want a 12 valve lol
Great video my man awesome job keep these great vids coming I’m always learning
Victor Oliveira absolutely brother I'm glad your enjoying the content! I won't let you down!
Seriously thinking of getting these gauges for my 99 24v
3:16 safety first with that wrench placed so carefully
This shit is badass doing my own on a focus st. Love the end man. God bless you too
I'm surprised a crayon eater was able to assemble all that! 🤪
Joking bro; great job once again. Can't wait to see your reaction after you upgrade your fuel injectors.
Got the same truck but a g56 6speed, will help once I install these thanks man
Yeah. Those expandable circuits... One fuse is for the circuit that you plug into and the other is for the device.
Yea I learned trial by fire haha
@@EVERYTHANGDIESEL 😂
Hey bro what up? How did these hold up? I'm bout to pull the trigger on a set..
Nice Vid!! Even if it is a fiat er dodge. 🤘🏻🤘🏻🤘🏻 Major props for soldering some of your connections. That said, lil constructive criticism, you shouldve made them inline splices. Or where you have one feeding two or more use a combination of a pigtail and inline splice. Looks better and more conducive to clean install. Just be sure BOTH conductors counter wrap around each other (not just one wire wraped around the other). Also, shrink tube is cheap and looks much better. Also also, using an environmental Stakon er crimp connector is advisable if you cant/dont want to solder. Apologies , 25yrs as a Sparkee working for oem has jaded me. Good luck! Cheers!
Gauges look awesome. I was wondering how you likes the AMS oil in transmission? Was thinking of trying it, my 08 6.7 does fine on highway but pulling camper on steep back roads heats up over 200 with mag hytec and Lucas synthetic. Need to keep tranny temp down, any suggestions?
Can you do a review on the lift pump. My next project when I get the $$$, great videos
William Barbahen yeah man no problem! I got good things to say about it lol thanks for the feedback
Does Taupe match the Grey interior ? Do they make a Grey pod kit ? I couldnt find Grey ?
Nice job, nice to share the real challenges of the system
thanks man i appreciate it! Yeah man I'm all about saving that dollar. Thanks for watching
What year is the mopar in the back ground?
Great video,thanks.
Good looking truck.
Another great video bro, love the gauges, I only have a boost gauge in with the srt 8 piller pod but use my edge insight 2 monitor for all my other gauges
Jason Hunt thanks man glad you loved the video! I have a s&b intake. I love the intake affordable and performs good.
You will have to let us know in a few months how those gauges are doing, some guys hate them and some say for the money you can't beat them.
AFG New Media man thank you for the comment. I will make a 30day review video for it. A few people mentioned to me they were skeptical about buying glowshift gauges but I love them they run good for me right now. I will release a 30day video about the review.! Thank you for the comment i appreciate it.
EVERYTHANG DIESEL No problem man I know how important interaction is and love the diesel community. I watch Greg A and Truck Master and Bertrand an JW Montoya all great guys and super helpful.
AFG New Media hell yeah brother I appreciate the words of encouragement thank you man again. More good content coming soon.
Boost pressure gauge needle not swip up when ignition on
How did they hold up?
2 questions for you. Are the gauges the tinted 7 color? And, do your gauges face you? Mine face up and over towards the dome light. The pods are made at a terrible angle. It's as if they are made to face a 7 foot tall person sitting in the middle of the truck.
The gauges face at me almost. U can see how it looks when they are installed on other videos like when I installed them. Mine face towards me.
@@EVERYTHANGDIESEL Thanks for the reply.
Yeah man
How did you install the fuel pressure gauge going to the cp3 pump?
Thanks.
The fuel pressure Guage didn't go to the cp3 it went to my air dog pump. It's low pressure fuel
Very helpful video brother :)thank you !!!
Thank you man glad you enjoyed
I had them on my Evo 9 and loved them!
yeah man these are good gauges!!
I just got the brace a while back and forgot to grease that barring. Do you know what grease to use exactly? I know there are about ten different ones and don’t want to ruin my investment. Also don’t worry the truck doesn’t move haha. It sit at my moms ranch.
Just use a quality grease. Wolfs Head for example, or Mobile One if you want to use a synthetic. Just stick with one or the other, don’t mix. 🤘🏻🤘🏻
Awesome job !
Great video man
Thanks man!
What kind of air intake elbow do you have? I was looking at the afe one but like yours also cuz it doesn't look so beefy
Jason Hunt prett sure it’s a BD diesel intake
i'm pretty sure its just a pusher style intake elbow that he painted.
Its a pusher mega intake
Are your GlowShift gauges still holding up? Thinking about pulling the trigger on the A pillar set and really like how they look but have read a lot of bad reviews on them.
I've had them on for 2 years and they still work fine. I never had any issues. Just have tight connections and install correctly and u should be fine
I’ve heard they aren’t very accurate, I’m wanting gauges but not sure what I want cause of price, but don’t want crap stuff either
Where did you get your intake manifold?
Ebay
Are these gauges still holding up? I am thinking of getting a set.
They still working good as the day I installed them.
Hey what's up, another awesome video! What did the overall cost end up being to do that? Thanks in advance!
6point7 cummins I paid 280 for the gauges since I opted for the fuel pressure gauge instead of trans guage
EVERYTHANG DIESEL I'm wanting boost, fuel pressure, and egt. When I look it up at website it is saying around $450
yeah look it up on ebay or amazon. i got mine from ebay. i paid 280. also glowshift has different lines of gauges mine are the basic type. the tow max ones with the digital display are like $400 something also.
EVERYTHANG DIESEL awesome! I always forget about the great Ebay or Amazon lol! Thanks man I appreciate it, look forward to your next vid!!
Are you still liking the glowshift gauges and had any problems with them? Thx!
Oh yeah they work like a charm! No complaints
@@EVERYTHANGDIESEL after 2 years how do u like them I am planing to buy some glowshift gauges
For your fuel pressure gauge did you have to get a separate part to 90 it to put it away from the pump to fit the snubber on? Or does it screw into the brass fitting that comes on the air dog?
it came with the snubber that screws into the brass fitting
Won’t make boost when it’s not under load😂
LMFAO! Dumb ass poser. Thats how a turbo works. Jus stick with your kia and keep the ignorant coments to yourself. 🤘🏻
You know short cutting electrical will screw you up. I done mine myself with fuse taps and only 3 wires… all the wire jumping was and is unnecessary you got showing there. You can cut allot of that extra wire crap out
How many mpgs are you getting in your 6.7?
I average about 17-19mpg city 21-22mpg highway. it kinda sucks because the fastest speed limit in my town is 55mph. Thats with stock wheels on.
Bout the same as mine!
***Cab not cockpit 😂
Rivera in the background?