PH Meter calibration issues Part 1

Поділитися
Вставка
  • Опубліковано 23 вер 2024
  • Trying to calibrate the meter with 6.86 buffer powder solution. But it keep shown error and unable to read any ph. Help help..

КОМЕНТАРІ • 37

  • @MrDabrudda
    @MrDabrudda 3 роки тому +6

    I sprayed the glass bulb with Isopropyl Alcohol (IPA) and soaked the end in hot tap water (as hot as your faucet has), blasted with IPA again, gently scrubbed the glass bulb with a boar's hair shaving brush and rinsed the tip and bulb in hot water. After I dried the tip off I soaked the end in distilled water and was able to calibrate the PH meter. Dried gunk gets built up on the glass bulb especially if the meter is used for measuring PH of hydroponic solutions which have dissolved salts, etc in the solution.

  • @wraith8117
    @wraith8117 4 роки тому +6

    Same pen same issues . Even with new batteries i think this pen is a peice of junk going off how many people have the same issue

    • @louis2103
      @louis2103  4 роки тому

      Haha.. Low quality perharps..

  • @chiefr31
    @chiefr31 5 років тому +3

    Same here, I’m only being offered a refund. I tried the take the battery out and it still doesn’t work. I even tried soaking it in distilled water and still no luck!

    • @louis2103
      @louis2103  5 років тому

      I guess it's one of the defect issue. Duno why these item so fragile.

  • @MaxSignsJames
    @MaxSignsJames 6 років тому

    The same with mine and same pen too, Did you sort out? what should be done?

  • @thirstbuster78
    @thirstbuster78 11 місяців тому

    Im having issues with one that looks the same. Did you solve it? Manual says to soak the tip in the liquid for a few hours... trying that now.

    • @louis2103
      @louis2103  11 місяців тому

      Didn’t solve. End up give up already

  • @daviddelgado6807
    @daviddelgado6807 3 роки тому

    Important!!! Or not but i just got a new one today and used purified drinking water (not sure if wrong) for the packets at 250ml and I would get the error when trying to calibrate the 4.01 ph one and wouldnt go away unless i removed the battery, but then I calibrated the other two packets with acurate reading and tested the 4.01 ph and it was at 3 ph so!!!! **I think if you try to calibrate without the correct ph lvl you might get the error code.

  • @starlyncabrera7540
    @starlyncabrera7540 Рік тому +2

    Mine will only calibrate to 6.86 but when try to calibrate 4.0 it will display 6.86 again can’t get It to go on to the next cal ph4.0

    • @sherya77
      @sherya77 Рік тому

      Same 😢

    • @John--cu2yu
      @John--cu2yu Рік тому +1

      Fast press cal after holding for 5 seconds

  • @monstermunch7083
    @monstermunch7083 5 днів тому

    You have to invest in a decent pen and clean it with ipa regularly

  • @ArashJooya
    @ArashJooya 5 років тому +1

    I have the same problem here! anyone found out what's the issue? thanks.

  • @frankdesantis8411
    @frankdesantis8411 5 років тому +1

    mine did same thing ...remove the battery to reset and then try it again...mine worked!

  • @louis2103
    @louis2103  6 років тому +1

    The seller sent me the new unit after seen this video.

  • @davewright9313
    @davewright9313 6 років тому

    Did you ever sort out the problem? or did you chuck it?

  • @henokmulat1324
    @henokmulat1324 5 місяців тому

    The water temperature must be 25°c?

  • @jaoffgrid
    @jaoffgrid 8 місяців тому +1

    Here watching videos before I try this thing and this is what I'm seeing

  • @charityjonah
    @charityjonah Місяць тому

    Same with mine …..is not reading

  • @arung5175
    @arung5175 5 років тому

    Same Issue for me also...
    Any solution or fix ?

  • @davewright9313
    @davewright9313 6 років тому

    exactly the same with mine and same pen too

  • @NovRizal-e5u
    @NovRizal-e5u 9 місяців тому

    Bisakah alat ini untuk ngukur ph urine

  • @catherinecarrigan5763
    @catherinecarrigan5763 11 місяців тому

    Hold calibration button for 5 full seconds.

  • @JordanUnidad
    @JordanUnidad 6 місяців тому

    Don't loose the press until the reading stopped blinking that's your wrong process

  • @rich1879
    @rich1879 17 днів тому

    Your instruction videos was wonderful. NOTTT. WHY DID YOU WASTE YOUR TIME. Cat got your tongue?

  • @alexmnc1
    @alexmnc1 6 років тому

    Shit exactly same here.

  • @jimjones6529
    @jimjones6529 2 роки тому

    My phone testers same problems

    • @louis2103
      @louis2103  2 роки тому

      Unit faulty then. CAnt be calibrated

  • @mantyshub90
    @mantyshub90 5 місяців тому

    This is so stupid i paid 15 bucks for a fking metter that i have to do all this bs to

    • @Mizman76
      @Mizman76 2 місяці тому

      Then,pay $80-$100+ for,one you ALSO have to do this to!😊

    • @monstermunch7083
      @monstermunch7083 5 днів тому

      @@Mizman76but it will last longer

  • @scottmanhood4506
    @scottmanhood4506 5 років тому

    same shitty amazon ph pen lol