Unfortunately the calibration procedure as shown in this video is WRONG! This is why so many people in the comments have problems with correct readings. Yes, you hold the calibration button down for 5 seconds as indicated in the video. Then the calibration pH will show (e.g. 6.86) BUT YOU WILL NEED TO LEAVE THE PH METER IN THE SOLUTION UNTIL CALIBRATION IS COMPLETE!!!!!!!! The calibration for the pH point is completed once the display stops flashing and goes to solid. This may take several seconds! NOW IT IS CALIBRATED. Taking the pH meter out right away and looking at the display as shown in the video will NOT, I repeat, will NOT calibrate the instrument. You must leave the instrument in with the displayed pH until the flashing stops. You can simply retest by now inserting the instrument into the solution without the CAL button being pressed. It should show the pH of the solution as indicated. If you calibrate with only the 6.86 solution your readings will be accurate to 0.1pH. For accuracy to 0.01pH you will need to calibrate using ALL 3 solutions. This is called a 3 point calibration.
Hello so it's not necessary to calibrate with the 3 powders? Does it also work with calibrate with just 1 powder? The only difference is accuracy 0.1 or 0.01? I think 0.1 is also fine then...
0:50 I can’t imagine where you got this idea but that’s not a glass vial full of water in the tip and the cap doesn’t keep anything from drying out. The piece of glass in there is just an insulator for the small sensor inside it and the cap is to keep it clean and protect from scratches.
Hey don’t know if you’ still do videos but this helped me today ...this is my second time buying the buffer solution to calibrate it because I messed it up the first time lol
Thank you for sharing, I tried calibrating but failed dismally as I didn't know about the fast press. This really helped me alot. Thank you for sharing.
omg lifesaver! i'm just here trying to figure out the instructions for my new pH meter and saw your video. The stars must have aligned 🤣because you have the exact same one as me with the 3 buffer powders. thankyou so much! it was doing my head in lol
Incorrect procedure...you need to leave it in the solution until it stops flashing as per instructions...the flashing is when its calibrating NOT when pressing for 5 sec. as that is just done to enter calibration mode. That's why the reading was all over the place after cuz it was trying to calibrate the air.
@@charlienairn783 you put in the solution for a moment without pressing anything, then press a call and hold for 5 seconds , stop holding the button, look at it first under a water and then take it out. Clean in distilled water and do another test. Got it ? 😊
TO EVERYONE SAYING THIS IS WRONG ->. It is NOT wrong, shes just doing it differently. I know because ive tried both ways 1000 different times. When you quick press like she is, you dont have to leave it in the solution like that. "Quick press" takes you directly to the different ph buffers faster without having to hold and wait. How do i know this? I HAVE AN IN-GROUND FRICKIN POOL and a Jacuzzi 6 person Spa....going on 15 years now. I check the ph every 3 days, 365 days/year. Calibrated every 2 weeks. Believe me, if the ph were wrong in my pool it will turn the water either brown or cloudy dark green.
Please Make sure to leave your METER in the calibration solution UNTIL the calibration STOPS. on the instructions Manual it says under part 3 that you have to leave it in the solution Until it stops blinking. other than that I think I now understand how to do this. lol
Thank God! Somebody I understand. Thank you. I did see Uwe Kackstaetter's post about not removing the meter until the flashing stops. Otherwise it won't calibrate. For cannabis grow can't I just use the one needed packet verses all 3 packets. I still don't understand it all. I'm determined though. :)
Well done! Always help to have a visual! Just received mine to test spa water. Also, mine was German made (live in Germany) and the written instructions have me using the ph 4.0, then 6.86, then 9.18. However the diagram part of the instructions have the 6.86 first like you, so that’s what I’m going with! Thx again!
Do yourself a favor and just use the drop kits to test ph if you’re only growing and not doing anything else. The cheap and expensive one’s have to be recalibrated, all the time, cheap one’s on literally weekly base. If you’ve already bought the cheap one check and note the PH of your tap water and the bottled water you usually use. After that 1-1.5ml for every 1 point of PH down or up you want to bring and drop kit to be sure. This is again, if one is only doing a small home grow.
Super super good video very clear and concise with with the calibration directions I do have a question though. So what every single time I have to recalibrate I have to order these three packets of solution?
Hi did you use plastic explosives to dissolve the saches in the distilled water , it looks like sea sand. Im havving problems getting that shit to dissolve.
No I'm not understand because In your case you just deep the meter in solution and get the right value but in my case I need to increase the ph value after pressing the call button for five seconds I get the ph value 6.43 in 6.86 buffer solution but when I press the call button it's decrease the. 0.01 value so my question is how to increase the ph value during the calibration
I got the answer once you press the call button after three flashing you press the call button to set 4 or according to whatever your calibration solution BTW thank for not helping but always be remember when your one door is closed god will be more and more doors
So after you're done with Calibrating the pH meter, what do you do with those 3 glasses of distilled water mixed with the pH Buffer Powder? So you just toss it out?
NO! Read the back of the packets. They say you can put the buffered PH water in a container and label it for future use. You do not have to keep buying buffering solutions. I just did this today, find 3 empty water bottles or whatever and label them.
That was a killer video thank you helped me calibrate my pH meter perfectly what is your recommendation as far as recalibrating I bought a pack of the recalibration solution like a 15 pack. How often do you think I should recalibrate
Mmm no... What you're doing is telling the machine that the water you're dipping it in is the specific pH. So if you're dipping it in neutral water and you calibrate it to 6.86 then you're ruining the calibration.
hey YouGrowGirl, how is the unit so far? thanks for the info interestingly, my KWODE PH Meter Digital PH Tester Pen has slightly different direction instead of seconds, I'm supposed to put it into the cal buffer solution, stir, wait until the unit stabilizes and then press cal for 2 secs and read the pen. hmmmm, guess they changed up the directions, i got mine in 2020
mine from amazon was totally fucked up...when testing the 6.86 solution was giving the value of 4.01;when testing the 9.18 solution was giving 7.8....these manufacturer should not smoke joints while working...i gave it back to bezos
just bought those packets to calibrate my ph meter like that one...but .are you mixing those packets w/ 250 ml of water?.. isn't 250 ml water like 8.454 oz of water ?..those cups look smaller
My directions say stir for five minutes with the ph meter dippe din the solution. Same one u have but u only dip for 5 seconds also after pressing and holding the cal it just blinks for a couple seconds then says err
What part of the nine one eight you call home great video btw I have a different meter still had to calibrate but I only had to use two different buffer solutions
you always store probe in liquid storing solution made for glass ph probes.. never wipe glass tip just clean with distilled water then store in storing solution
Even while holding for 5 seconds in 6.88 solution it doesn't show that ph, it's not getting calibrated at all. I have a digital ph meter. What should I do?
After first time calibration, is the meter has any mechanism to save the settings or it will be set all the time if we want to test the after some time.?
Do yourself a favor and get a quality ph meter. I've tried a few of these cheap ones and the calibration doesn't last long. I was constantly calibrating them.
Hi ..I am running my own business of laundry detergents and I am facing the problem how to test the pH value of the this powder using the pH meter.I want you help me in this regard . I will be waiting for your kind response. Thank u
Hi can anyone let me know, what is PH calibration? Does it means we are testing the PH meter with those solutions and if it's not showing right value, you adjust the pH meter, so it give the right PH value? Correct me if I'm wrong
Unfortunately the calibration procedure as shown in this video is WRONG! This is why so many people in the comments have problems with correct readings. Yes, you hold the calibration button down for 5 seconds as indicated in the video. Then the calibration pH will show (e.g. 6.86) BUT YOU WILL NEED TO LEAVE THE PH METER IN THE SOLUTION UNTIL CALIBRATION IS COMPLETE!!!!!!!! The calibration for the pH point is completed once the display stops flashing and goes to solid. This may take several seconds! NOW IT IS CALIBRATED. Taking the pH meter out right away and looking at the display as shown in the video will NOT, I repeat, will NOT calibrate the instrument. You must leave the instrument in with the displayed pH until the flashing stops. You can simply retest by now inserting the instrument into the solution without the CAL button being pressed. It should show the pH of the solution as indicated. If you calibrate with only the 6.86 solution your readings will be accurate to 0.1pH. For accuracy to 0.01pH you will need to calibrate using ALL 3 solutions. This is called a 3 point calibration.
Hello so it's not necessary to calibrate with the 3 powders? Does it also work with calibrate with just 1 powder? The only difference is accuracy 0.1 or 0.01? I think 0.1 is also fine then...
Well, stated!
@@avanox3100 Yup, you are absolutley correct
@@uwekackstaetter2404 thx for information. :)
Valuable info. Thank you
Thank you! I bought two of these, neither one told you to quick press calibrate once or twice more. You’re the best!
0:50 I can’t imagine where you got this idea but that’s not a glass vial full of water in the tip and the cap doesn’t keep anything from drying out. The piece of glass in there is just an insulator for the small sensor inside it and the cap is to keep it clean and protect from scratches.
phew! thanks! I thought so and wondered why nothing to that effect was in the instruction manual.
Should have watched this before I totally screwed up my calibration! The directions in the box were crap!
They didn’t even send me the packets. Cool.
Yeah I'm having this same problem
@@austinpauls6737 My packets are effed up. The 4.00 is the 6.86 and the 9.whatever is the 4.00
Hey don’t know if you’ still do videos but this helped me today ...this is my second time buying the buffer solution to calibrate it because I messed it up the first time lol
hell, i messed up to the first time -_- now i don't have buffer solution
@@SwapSupra you can order more on Amazon. I had the same issue
Green Team yeah thats what i did :p
Thank you for sharing, I tried calibrating but failed dismally as I didn't know about the fast press. This really helped me alot. Thank you for sharing.
THANK YOU ,this video was alot of help.Jesus christ bless you and family.
dhjsjs
Great video, but my ph meter doesn’t work regardless. I’ve followed all steps. Return it is …
omg lifesaver! i'm just here trying to figure out the instructions for my new pH meter and saw your video. The stars must have aligned 🤣because you have the exact same one as me with the 3 buffer powders. thankyou so much! it was doing my head in lol
Best vido in internet of ph calibration, by far.. thank you :)
This video is wrong.
Thank you. The cal instructions with these cheap ph meters leave a lot to be desired.
Thank you! The instruction manual is not as clear as your tutorial! I really appreciate you!!!☮️💚🧬
Incorrect procedure...you need to leave it in the solution until it stops flashing as per instructions...the flashing is when its calibrating NOT when pressing for 5 sec. as that is just done to enter calibration mode. That's why the reading was all over the place after cuz it was trying to calibrate the air.
What do you mean all over the place It was on point or maybe 1 point off of course it's going to read when it hits the air
My instructions say exactly what you are saying
So Ed, thanks but after it stops flashing what then? Do you a) push the calibration button again? Or b) push the off button? Or c) do nothing?
@@charlienairn783 you put in the solution for a moment without pressing anything, then press a call and hold for 5 seconds , stop holding the button, look at it first under a water and then take it out. Clean in distilled water and do another test. Got it ? 😊
True. There's an END indicator if you calibrate it properly.
Nicely explained. Thank you for the detailed information. (From India)
Thank you very much, it has been very useful to calibrate the equipment.
TO EVERYONE SAYING THIS IS WRONG ->. It is NOT wrong, shes just doing it differently. I know because ive tried both ways 1000 different times. When you quick press like she is, you dont have to leave it in the solution like that.
"Quick press" takes you directly to the different ph buffers faster without having to hold and wait.
How do i know this? I HAVE AN IN-GROUND FRICKIN POOL and a Jacuzzi 6 person Spa....going on 15 years now. I check the ph every 3 days, 365 days/year. Calibrated every 2 weeks. Believe me, if the ph were wrong in my pool it will turn the water either brown or cloudy dark green.
Please Make sure to leave your METER in the calibration solution UNTIL the calibration STOPS. on the instructions Manual it says under part 3 that you have to leave it in the solution Until it stops blinking. other than that I think I now understand how to do this. lol
This totally helped me. I m currently doing experiment on pH kf fermented rice and hoping all turns out well! Thx 4 sharing !
So what do you do to recalibrate once you have used the packages?
Thank you ma'am. Used your method and it worked.
Thanks for just making a simple video and not overcomplicating everything c:
Can you please update us on what to do if our readings dont come out perfect? Thanks!
The readings are sometimes off by a couple numbers but close enough.
Mine says 6.86 when I'm using a 4pH powder so.....
@@jayjee1612 recalibrate.
@@jayjee1612 same it will only flash at the 6 ph wont calibrate any other. Did u find a solution?
@@dannyboi7695 trash it and get a better one.
Thanks for the terrific video. Great information!
Ok I am confused at the end...when do you turn it off and then can use it?
Thank God! Somebody I understand. Thank you. I did see Uwe Kackstaetter's post about not removing the meter until the flashing stops. Otherwise it won't calibrate. For cannabis grow can't I just use the one needed packet verses all 3 packets. I still don't understand it all. I'm determined though. :)
This video Umm.. was Umm.. very Umm.. Helpful Umm.. I Umm.. really Umm.. Learned Umm.. a lot Umm
I wish this was the first video I used for this. Great Job!
Well done! Always help to have a visual! Just received mine to test spa water. Also, mine was German made (live in Germany) and the written instructions have me using the ph 4.0, then 6.86, then 9.18. However the diagram part of the instructions have the 6.86 first like you, so that’s what I’m going with!
Thx again!
Sadly we have to use china as our countries sold our futures out many decades ago with ‘free trade’.
All my powders gave same reading
Simple. Good. Useful. 100% Stars. Content.
Thank you for this video works like a charm!
Thanks for sharing. Much appreciated 👍
Thank you, so easy explained and very helpful.
Do yourself a favor and just use the drop kits to test ph if you’re only growing and not doing anything else. The cheap and expensive one’s have to be recalibrated, all the time, cheap one’s on literally weekly base. If you’ve already bought the cheap one check and note the PH of your tap water and the bottled water you usually use. After that 1-1.5ml for every 1 point of PH down or up you want to bring and drop kit to be sure. This is again, if one is only doing a small home grow.
I have that meter but it won’t zero out! Any ideas?? Thanks for the awesome video and your time and expertise!!🙏🏻🙏🏻
Really helpful video. Thanks from the UK!
Much appreciated!!
Thank you! You’re video is so clear to me🙌🏽
My unit does not have a small screwdriver to turn something to recalibrate. So if my reading is not accurate, how do I recalibrate it?
Mine doesn't want to calibrate! Just doesn't flash the calibrated ph
This helped me so much!! Thank you! 😊
Excellent thank you just did it 👍
Thank you for the video !! Very usefull!!!
VERY GOOD.YOUR VEDIO.THANK YOU
Awesome thanks for the video, help me out a lot 👍
I calibrated same process which is shown.
But the 9.18 reading is not stable witch shown on buffer powder.
What's the reason of not stability on 9.18.
Super super good video very clear and concise with with the calibration directions I do have a question though.
So what every single time I have to recalibrate I have to order these three packets of solution?
Hi did you use plastic explosives to dissolve the saches in the distilled water , it looks like sea sand. Im havving problems getting that shit to dissolve.
thank you maam for sharing the idea .. for how to calebrate the ph pen.. now i know and thnk you for your vlog..
Err err err err every time grrrrrr
In the 250ml cup you used the all sak of powder 6.86 , 4.00, 9.18
Had a number of plants pass away recently... better check for lock-out :(
No I'm not understand because In your case you just deep the meter in solution and get the right value but in my case I need to increase the ph value after pressing the call button for five seconds I get the ph value 6.43 in 6.86 buffer solution but when I press the call button it's decrease the. 0.01 value so my question is how to increase the ph value during the calibration
I got the answer once you press the call button after three flashing you press the call button to set 4 or according to whatever your calibration solution BTW thank for not helping but always be remember when your one door is closed god will be more and more doors
So after you're done with Calibrating the pH meter, what do you do with those 3 glasses of distilled water mixed with the pH Buffer Powder? So you just toss it out?
NO! Read the back of the packets. They say you can put the buffered PH water in a container and label it for future use. You do not have to keep buying buffering solutions. I just did this today, find 3 empty water bottles or whatever and label them.
Awesome question great response 👍🏽
@@BigAssNigga311 Thank you!
@@BigAssNigga311 thanks you answered something I been looking at all day and was going to order loads of them powders with my order👍
Do u pour the whole packets in?
That was a killer video thank you helped me calibrate my pH meter perfectly what is your recommendation as far as recalibrating I bought a pack of the recalibration solution like a 15 pack. How often do you think I should recalibrate
Doesn’t say anything on their website?
simple video... good
The meter reads these numbers even if it is not dipped in water and you do these procedures. Makes you wonder if it is correct.
Mmm no... What you're doing is telling the machine that the water you're dipping it in is the specific pH. So if you're dipping it in neutral water and you calibrate it to 6.86 then you're ruining the calibration.
Awesome thank you. Should I calibrate this as soon as I get this ?
Thanks, very informative and easy to follow
Thank👍 You very much
Only problem is recalibration after the first calibration
Should I do this when I purchase them? Before the first use ?
hey YouGrowGirl, how is the unit so far? thanks for the info interestingly, my KWODE PH Meter Digital PH Tester Pen has slightly different direction instead of seconds, I'm supposed to put it into the cal buffer solution, stir, wait until the unit stabilizes and then press cal for 2 secs and read the pen. hmmmm, guess they changed up the directions, i got mine in 2020
mine from amazon was totally fucked up...when testing the 6.86 solution was giving the value of 4.01;when testing the 9.18 solution was giving 7.8....these manufacturer should not smoke joints while working...i gave it back to bezos
just bought those packets to calibrate my ph meter like that one...but .are you mixing those packets w/ 250 ml of water?.. isn't 250 ml water like 8.454 oz of water ?..those cups look smaller
Excellent video. Thanks
I’ve bought 2 now. I cannot calibrate the last one 9.18
We’re you able to? I can’t either
@@MariaRodriguez-yh5vk nope still can’t. I gave up.
They didn’t send the third calibration package. Can I still calibrate without it?
How often do you have to calibrate the meter? I'm using it to test the pH of shampoo
Yes I did this but mine like this but didn't reach 4.0. How do you recalibrate if you don't have the packets it reads 7.0 on water..
My directions say stir for five minutes with the ph meter dippe din the solution. Same one u have but u only dip for 5 seconds also after pressing and holding the cal it just blinks for a couple seconds then says err
What part of the nine one eight you call home great video btw I have a different meter still had to calibrate but I only had to use two different buffer solutions
After this calibration, everytime test whatever liquid also need to press cal to get the result or just put it and wait the number get stable?
You said "make sure you lock that in" ??????????
you have way more that 250ml. looks more like a cup
250ml is a cup
@@HPAddict my bad. damn beer
@@papercuts777 haha that's okay
im moving and i found a red one in the shed so i decided to learn how to use it
So what are you supposed to do if you don't have that powder anymore
Unfortunately, the explanation in this video is wrong.
i ordered on of these and never got the callibration chemicals.. what do i do now
you always store probe in liquid storing solution made for glass ph probes.. never wipe glass tip just clean with distilled water then store in storing solution
use water thats same temp that you test at
since only one set of the poweders comes with the meter can the solution be saved for future use or would the PH of the solutions change over time?
I’m guessing you can reuse the solutions, that’s what my instructions said.
My meter doesn't have those buttons it looks exactly the same but mine o ly has on off on top
So what if they aren’t calibrated? How do we calibrate them?
I lost my calibrate powder.. can I purchase anywhere?
I don't have 2 buttons, only on/off. What should I do?
Is it ok to use plastic beaker to mix buffer powder ?
Even while holding for 5 seconds in 6.88 solution it doesn't show that ph, it's not getting calibrated at all. I have a digital ph meter. What should I do?
So I just messed up what’s the difference now ?
After first time calibration, is the meter has any mechanism to save the settings or it will be set all the time if we want to test the after some time.?
Do yourself a favor and get a quality ph meter. I've tried a few of these cheap ones and the calibration doesn't last long. I was constantly calibrating them.
Hi how much powder do u put on each 250 ml water? Do you put also the whole 250 ml sachet on the water?
very good instructions!
The package says to use deionized water.
Hi ..I am running my own business of laundry detergents and I am facing the problem how to test the pH value of the this powder using the pH meter.I want you help me in this regard . I will be waiting for your kind response. Thank u
I would use deionised water rather than distilled water
Hi can anyone let me know, what is PH calibration? Does it means we are testing the PH meter with those solutions and if it's not showing right value, you adjust the pH meter, so it give the right PH value? Correct me if I'm wrong
Correct
Mine was not able to read the first 6.18 solution. Is it fine with just the two others?
Does the powder or whatever makes the water that pH?
What plants do you grow ?
If i cant calibrate my meter can i just do math and + or - the 0.04 that the meter is stuck on?
It needs only once calibration? Or every when?
Every 10 uses l will do when l will have 3 empty jar from mustard .
I got first one already , so l can keep it. 😁
What to do if the reading keeps drifting please?
mine says "End" after holding it for 3 seconds and not really calibrating it :( what can i do?
Same as mine I think its broken lol