Your comments really hit home for me. I did the same thing you did with a Travel Trailer. I'm unbelievably embarrassed by my decision to purchase it. I felt overwhelmed many, many times and still get that way..
You know what, take away this, I commend you so much, you took on a challenge, with no BS! Yea you made mistakes, so what, your doing it, and you admit it, no editing out, I would be proud! It’ll be fine, still a very nice camper,I know a little bit about construction,not about axle weight or anything, but you did more than all of us sitting here.Don’t know the end result, but I do know you should be proud!
Great work. In my over 60 years of camping, I have been camped in everything from motorcycle pop up campers to 32' fifth wheels. If I were to build a camper, I would use as much aluminum as I could afford, and have found that tandem axles pull much better. It is too late for you to add an axle instead of going with a heavier one, but for whatever reason they tow more true with fewer wind issues.
Live and Learn, that is the way. The best way to learn is to do it yourself. You will learn as you live in it what you would change there. Everyone's needs are going to be different. I look forward to you living in it and the next project you take on.
YOU ARE DOING A GREAT JOB!!! We all learn, its never a mistake if you learn from it LOL!. I'm retro fitting my old 4'X8' Trailer in to a mini Camper. It was built like a Conestoga with a Canvas Top. Now it has a Aluminum top that goes down the sides a 1/3 of the way. side windows installed, weather breaks I want to start on the inside insulation & wiring next....
I built my own teardrop from scratch also and had more problems with getting tags than insurance. I would do it again in a second and my teardrop is now 9 years old and still going strong. There is something about knowing every bolt, screw and wire on something that is so satisfying and rewarding.
Yes the whole insurance thing... I ran into a similar conundrum, trying to explain to them that I could build something that was going to be far superior to the manufactured "certified" trailer did not get me anywhere. Canada can be funny with these things. I even thought about getting the build engineered, stamped, etc.... my solution was to just start with a cargo trailer and "lightly" modify it. Keeping it road legal. I'm glad you found someone to insure Eddie 2.0!
I just have to say I admire the lesson learned because for me I have learned many in the past however I've gained a great wealth of knowledge from these lessons and been able to use them as tools later in life so looking at what I'm seeing now makes me smile with a sense of pride and congratulations on your build I think what you've done is just totally awesome, I would certainly like to be able to know what you have plan wise in the future as far as maybe making a larger build with your current knowledge and I realize that maybe another lesson gained out of that if you might be doing so and posting it on UA-cam you definitely have my attention and my support God bless and Godspeed
Excellent Job on Eddie. Chances are I would have used some type of Rhino or truck bed plastic/rubber coating on the stainless steel floor substructure before fastening to the frame. You can still do it but it would have been easier before installing. You did an amazing job and well plan out project. 👍
The Insurance company, I would never thought it. Even USSA had Geico insure travel trailer in the U.S. Check out if you have to replacement the trailer if it is stolen, how much they will pay. Trailers seem to up in price not down..
Would steel studs have been lighter than wood? Have fantasized about a DIY travel trailer and I keep thinking all the wood I see in commercial units is heavy. Steel studs, alumalite (corrugated plastic w/ aluminum skin) paneling, spray foam for insulation and binding, etc.
I watch a lot of youtube channels but here's a suggestion for you Mustie 1 youtube channel he undercoats all his frames with bar and chain oil and its seems to work good. he lives in northeast of the united states so it must work good.
Great summary! Two questions, any plans for a roof vent fan? Or wall mount? Do you think the black color will draw in more heat to the trailer in the warm months?
There will be 2 Max air fans in the roof. One in the shower and one above the bed. I live in Canada so I'll take the extra warmth when I can get it, lol.
Is it possible to find out the insurer you used to have and the one you ended up going with? I'm currently with a big-name insurer myself and am looking at potentially switching, but I'm also looking at doing one of these builds myself in the near future, and would hate to move away from my current insurer if they ended up being the one you ended up with. Dealing with insurance is already bad enough, but when you end up having to go back to one, it's almost worse. Thanks.
you shouldn't be sorry about powder coat, it is a long way from a perfect product. I have worked around it for years & if it isn't prepared right, or if it has any imperfections on application, it will fail badly. Also it is terrible to remove if you need to weld something. Bedliner over good primer is a much better option IMO
No regrets about buying the junker trailer? Possible bed liner on the frame instead of flex seal? Overall I'm impressed with the work and design, can't wait to see him in action.
Feel good that you did not powder coat. Its NOT the way to go on a trailer. Powder coat is so hard that 1 stone chip, and the whole finish is compromised. Once water and rust get under it, it starts flaking off like crazy. Been there, done that, never again, Good old paint or under coating can be easily and quickly touched up and ready to go. Keep up the good work and great videos!
Your comments really hit home for me. I did the same thing you did with a Travel Trailer. I'm unbelievably embarrassed by my decision to purchase it. I felt overwhelmed many, many times and still get that way..
You know what, take away this, I commend you so much, you took on a challenge, with no BS! Yea you made mistakes, so what, your doing it, and you admit it, no editing out, I would be proud! It’ll be fine, still a very nice camper,I know a little bit about construction,not about axle weight or anything, but you did more than all of us sitting here.Don’t know the end result, but I do know you should be proud!
We’re very proud of him too 🥰
Great work. In my over 60 years of camping, I have been camped in everything from motorcycle pop up campers to 32' fifth wheels. If I were to build a camper, I would use as much aluminum as I could afford, and have found that tandem axles pull much better. It is too late for you to add an axle instead of going with a heavier one, but for whatever reason they tow more true with fewer wind issues.
It sure has come a long way! Nice thing is you know every screw, nut and bolt in your camper.
Live and Learn, that is the way. The best way to learn is to do it yourself. You will learn as you live in it what you would change there. Everyone's needs are going to be different. I look forward to you living in it and the next project you take on.
Absolutely!
Thank you for those pearls of wisdom. Experience is an excellent teacher. Hard to believe you only have 46k subs.
Wow, thank you!
YOU ARE DOING A GREAT JOB!!! We all learn, its never a mistake if you learn from it LOL!. I'm retro fitting my old 4'X8' Trailer in to a mini Camper. It was built like a Conestoga with a Canvas Top. Now it has a Aluminum top that goes down the sides a 1/3 of the way. side windows installed, weather breaks I want to start on the inside insulation & wiring next....
A big hug from Brazil my friend, I watch all your videos
Awesome! Thank you!
Great show Scott!!!🤙🏾🤎💪🏾🏕
I built my own teardrop from scratch also and had more problems with getting tags than insurance. I would do it again in a second and my teardrop is now 9 years old and still going strong. There is something about knowing every bolt, screw and wire on something that is so satisfying and rewarding.
It looks awesome. Love your honesty and integrity. I’m looking forward to the vinyl wrap for that visual effect.
Thanks so much!
A bad experience can be a valuable lesson. Thanks for sharing.
So true!
Yes the whole insurance thing... I ran into a similar conundrum, trying to explain to them that I could build something that was going to be far superior to the manufactured "certified" trailer did not get me anywhere. Canada can be funny with these things. I even thought about getting the build engineered, stamped, etc.... my solution was to just start with a cargo trailer and "lightly" modify it. Keeping it road legal. I'm glad you found someone to insure Eddie 2.0!
Ive watched the complete process and it's really hard to comment anything more than "OUTSTANDING WORK"
Sure enjoying your learned lessons n your honesty Scott with Eddie build. Many layers of wisdom!!
Thanks 👍
Maybe try some spray on bed liner or undercoating for the bottom diamond plating
Always use a good Etch primer on Aluminium!
Looking good. Cant wait to see how the shower turns out. Going to be interesting to see how tile stands up to back country rough roads. Stay safe!
Can't wait!
Thanks for sharing this is how we learn,I can't wait to see the completed project I know it will be great.🙂🇨🇦👍👍👍👍
Looking forward to the interior!
Me too
I just have to say I admire the lesson learned because for me I have learned many in the past however I've gained a great wealth of knowledge from these lessons and been able to use them as tools later in life so looking at what I'm seeing now makes me smile with a sense of pride and congratulations on your build I think what you've done is just totally awesome, I would certainly like to be able to know what you have plan wise in the future as far as maybe making a larger build with your current knowledge and I realize that maybe another lesson gained out of that if you might be doing so and posting it on UA-cam you definitely have my attention and my support God bless and Godspeed
good mornign! brother! yeah!superb ~
👍
Great video again. Looking forward to see more.
Awesome, thank you!
Good tips Scott. Thank you. 👍😁
No problem 👍
Excellent Job on Eddie. Chances are I would have used some type of Rhino or truck bed plastic/rubber coating on the stainless steel floor substructure before fastening to the frame. You can still do it but it would have been easier before installing. You did an amazing job and well plan out project. 👍
Thanks 👍
The Insurance company, I would never thought it. Even USSA had Geico insure travel trailer in the U.S. Check out if you have to replacement the trailer if it is stolen, how much they will pay. Trailers seem to up in price not down..
Great video Scott. Then best for trailer frames would be hot dipped galvanised. Great work.
Thanks Doug
Would steel studs have been lighter than wood? Have fantasized about a DIY travel trailer and I keep thinking all the wood I see in commercial units is heavy. Steel studs, alumalite (corrugated plastic w/ aluminum skin) paneling, spray foam for insulation and binding, etc.
With the benefit of hindsight we all would do most things differently. Underwriters love paperwork for their files.
Incredible work ...... where did you find the shop to build the trailer frame?
When you say you would use steel frame instead of wood, are you talking about steel studs like used in house framing?
Very good work. Great job!
Thanks a lot!
I watch a lot of youtube channels but here's a suggestion for you Mustie 1 youtube channel he undercoats all his frames with bar and chain oil and its seems to work good. he lives in northeast of the united states so it must work good.
I love this thank you
You’re welcome 😊
Have you tried an overnighter with the mini woodstove this winter yet? Interesting video.👍
Nice, what type, gauge or name of the aluminum you used on the outside?
What thickness do you use for rubber membrane you use for roof.? Thanks
Great summary! Two questions, any plans for a roof vent fan? Or wall mount? Do you think the black color will draw in more heat to the trailer in the warm months?
There will be 2 Max air fans in the roof. One in the shower and one above the bed. I live in Canada so I'll take the extra warmth when I can get it, lol.
Is it possible to find out the insurer you used to have and the one you ended up going with? I'm currently with a big-name insurer myself and am looking at potentially switching, but I'm also looking at doing one of these builds myself in the near future, and would hate to move away from my current insurer if they ended up being the one you ended up with. Dealing with insurance is already bad enough, but when you end up having to go back to one, it's almost worse. Thanks.
Had to go with Allstate. They’ve been very good to deal with.
you shouldn't be sorry about powder coat, it is a long way from a perfect product. I have worked around it for years & if it isn't prepared right, or if it has any imperfections on application, it will fail badly. Also it is terrible to remove if you need to weld something. Bedliner over good primer is a much better option IMO
No regrets about buying the junker trailer? Possible bed liner on the frame instead of flex seal? Overall I'm impressed with the work and design, can't wait to see him in action.
I would have never attempted building my own unless I went through the experience of dismantling the original.
Feel good that you did not powder coat. Its NOT the way to go on a trailer. Powder coat is so hard that 1 stone chip, and the whole finish is compromised. Once water and rust get under it, it starts flaking off like crazy. Been there, done that, never again, Good old paint or under coating can be easily and quickly touched up and ready to go. Keep up the good work and great videos!
I quite agree, a good coat of Epoxy primer to start with, that is of course if Hot dip Galvanising is not possible.
Thanks for the tips!
👍🏼
top
I thought you were in Ontario. I didn't think you needed travel trailer insurance in Ontario....
Your having problems with Paint because you never PRIMED THE METAL!!!!!