You are extremely good A lot of people talk that talk but they cannot walk that talk but you walk your talk you are super good and what you do I don't know you from Adam to Eve but all I have to say I'm glad to see somebody with a good knowledge to do it themselves you look like the type of guy when you get old you were past all that knowledge to your kids One Love.
Good job, looks nice. I built a 16x24 barn type 2 story garage about 3 years ago all by myself. Basically looks the same as your. But I did a few things different. For example my foundation, I used 6x16x8 cement blocks. I dug a trench the dimension of the garage 8" deep. Packed in 1" of gravel. Then I set 1 layer of the block in the trench. I pounded in every hole in the blocks a 3' peice of rebar. Then filled all the holes with cement. When I did that I also installed some bolts so I could attach the 2x6 bottom plate to the foundation. Cause I built the whole bottom floor with 2x6s . Then inside those blocks, for the garage floor I installed 12x12 cement pavers so I can drive on it. For the garage door I built 2, six foot swinging doors and and attached a garage door opener to them. It's pretty cool if I say so myself. Then the walk thru door I installed 2' back from the garage door so not to waste the whole wall. I wanted as much wall space as I could get. So I can still pull my truck in there. So I installed my stairs outside on the back 16' wall and built a 10'x6' deck with a 6' high fence around it. And installed a door for the second story. I used 2x12x16 floor joists for the upstairs floor. For the trusses I used gussets at the intersecting points. And for added support I added 2x2x6 peices attached inside the trusses from the top pitch to the side pitch of the roof. It took me about 5 months every day after work and every weekend. The best part is it saved me all kinds of money. I built the entire garage for $9800.00. The cheapest bid I got was $69000.00. But that would have been all up to code. Anyway enjoy and take care.
Very nice job!! Thank you for taking time out of your busy day to share your video with us here on UA-cam. Looks like it would make a great off grid tiny house or guest house instead of storage.
I understand that but, when I saw the video I could see a kitchen, living room and bedroom plus bathroom. I also saw a small home for elderly parents too.
OUTSTANDING, YOU DID AN EXCELLENT JOB. MY HUSBAND AND I BUILT LIKE THAT BUT ONLY 1 STORY. LOOKS GREAT!!! START STORING FOOD AND WATER NOW FOR YOUR FAMILY!!!
Happy I came across this video I'm getting ready to build a 16x26 shed similar to what you have. Thanks for posting a video. Since this was three years ago I'll check to see if you have updated vids on the finished product. 👍
Nice job! I built my recording studio back in my music days, and I built my shop at my Mt. Cabin which turned out to be my first wood working video for youtube. And like you, I did all of it by my self except for the siding which was 4 x 8 siding and my son helped me with it on the studio, but I actually figured out a way to do even that by myself on the shop by using cleats screwed to the outside floor joists and just setting the siding on it until I could get a couple screws in it. All my ceilings etc in the studio I did with a lift I rented. My shop does not have a finished out ceiling, just a metal roof with exposed rafters and purlins so I did not need the lift there. My shop is also built on a much steeper slope than yours, but I made a grid of my joists and put in several supports in the corners that the grid formed in several places and I dug a 6" hole about a foot and a half deep that the supports went down into and then I poured concrete into that. I think there were about 20 of those. Took a while but It does not budge lol! But you did quite a good job with your build. I relate!
Beautiful job man. I'm building my own little barn. It is much simpler than yours, but I've never done something like this before so it's taking a good amount of time. I started six months ago and I only have a floor and three walls built. You def have some real ability!
I did a somewhat similar upstairs deviation from the norm to add ceiling height in a garage I built for my father back in the 90's. I balloon framed it with a steel beam in the center due to span and width, but the balloon framing allows for added height upstairs...did the same on my brother in law's garage. Smart decision on your part...nothing worse than crouching in a storage area when you can elevate and make it actual useful for more than storage as you have done! Good job.
if you put 4×4's 4ft. apart underneath, cemented in and secured with large lag bolts at the top of each 4×4, directly at each corner and ajoining 2×4's across, the wooden structure will be able to hold and the foundation will be entirely sure without any issues of weight-bearing, on floors.
Only someone who has done something like this can understand the feeling. Great job!!! Suggestions moving forward would be to use 10/3 UG wire from 30 amp house to 20 amp shed due to the run. Otherwise you will be tripping in the house on a hard draw like a compressor start while using other stuff in the shed. The 10/3 will allow you two 110 circuits. ........... Again, fine job.
very nice,You've definitely swung a hammer before,looks like a professional job. I'm building a shop soon and am going to go big too.Barn roof looks nice, good job on the shingles
Sadly, I live in an area where city ordinances prohibit structures of that size. The largest i could build was 8x12 using the barn style roof similar to yours. Mine is simple storage. If had one like yours it would be dedicated to my full wood shop, now in 1/2 of my garage. I must move tools for each job. In your shed everything would be permanently set in place...it would be wonderful. Nicely done sir.
Beautiful! Would love to have one similar but with the walk in door opposite side. Looking forward to seeing it when you have all your tools, etc. and insulation done.
Nice build. Like the height in the upper level. One thing you should take into consideration is the tree by the front door. Those pesky things have a habit of growing over time. I watched one, over time, push over a 1.5 foot square, concrete and stone fence pillar.
Keep meaning to, just been so busy with work and kids... Want to put out a compilation of photos and videos of when I built it... want to put out a what I would do differently if I built it again ...and also want to put out a "what it looks like now" video. Sneak peak, I have added insulation and a Minisplit heat pump... the first floor is more of a workshop and the kids have taken over the 2nd floor with a hangout place. I used plywood instead of drywall to close in the walls and keep a workshop/shed feeling. Thanks for the interest, I will try to get something out this summer (on vacation most of July right now).
I love it man. Thank you for sharing. I've been wanting to do something very similar to this for some time now. This video is my inspiration to start this weekend. lol. Thanks again!
So that I understand completely you dug a trench, you put in crushed rocks ,and then you put like 4 x 6 on top of the crushed rocks and then built on top of the 4 x 6 with the flooring and then the walls on up I see underneath there what looks like some concrete blocks, this is just amazing I don't want to bother you but if you could please reply thank you so much Richard
@@richardarsenault1471 No problem asking I don't mind discussing ...but no I didn't dig a trench, I only dug down about 5-6 inches for each pillar (pillar = 8"x16" concrete bricks stacked at different heights depending on grade) and filled with crushed limestone rocks. In hindsight, i wish I had built a more substantial foundation but so far my pillars (and shed) have remained completely level using this method and I dug those holes in 2015. There is a lot of sandstone right beneath the surface in my yard under my shed so I got lucky with very stable ground. If you are going to build a large shed like mine you may want to look into building a more substantial foundation than I did to protect your investment especially if you have unstable ground.
@@edlistI live in the city of riverside in Southern California 50 miles in from the ocean ann about 40 miles from the desert, the ground where I live is hard has a rock ,your ground looks damp and moist, which is why I'm so surprised ,but I just want to make sure my shop will be stable ,I just don't want to spend like $5000, for concrete, I'm searching other ways, thank you again for your help ,your shop is just amazing best regards Richard
Yes, I put 2" Extruded Polystyrene (XPS) Rigid Foam Insulation under the floor as I installed it... there are a few videos from others on youtube about how to do this. Works well, glad I did it
How is the floor engineered? Concrete piers or just on blocks? Spacing on the supports? What size lumber for floor joists and spacing, etc.? How has it held up? Given you put in a garage door, I would assume you have stored heavy equipment in there?
Just a question if you are worried about the building moving down the slope (slipage as you say) why didnt you pour footings for the building to sit on?
I should have... one of the things I list that I wish I would have done differently is to pour a proper foundation. But with that said, the land is very stable (lots of sandstone, just below the surface) so even without a foundation it should be okay. The extra rocks should slow down the rain from washing away the dirt I piled up around the concrete blocks. ...but again, if I had to do it again, I would have poured a proper foundation.
Sorry if I sounded crass with my comment. I didn't know if there was a reason for it. I am building a small cabin myself and going to put it on blocks. I was asking so if there was a mistake I didn't make it also. thanks for the reply!
not crass at all, this is one of the more common comments (and rightly so). if you put it on blocks, put it high enough to be able to work under (be able to go under and jack it up if/when it starts to settle)... this will also allow more air under and prevent rot. I already jacked up my shed and put 2 more sets of blocks (so 8 inches higher).
Very nice building and video. Where did you obtain plans for the building (especially the roof and the structure for the 19” wall and roof on the second story)?
This shed has no official plan. I started by buying a basic shed plan for ~$10 online by googling "cheap shed plans". Then looked at various plans online and on youtube to get ideas and came up with this shed. I would not recommend using my idea for the 2nd floor 19" mini-wall since it created a weak structure causing me to have to add the "ugly" braces to save the structure. Instead I suggest either making it like a pole barn (using long poles that span the 1st and 2nd story walls instead of stacking the 2nd story mini-wall on top of the 1st story) or changing the roof shape so that the first part of the roof connects directly to the 2nd story base, is more vertically pitched, and is longer so that the roof itself acts like a 2nd story wall. ...But if you don't mind the braces and/or add interior walls inside the shed, the mini-wall works fine.
, garage, workshop, storage on first floor, apartment on second floor, all in one building, perfect. especially in colder weather, pull inside, go upstairs, without going outside, perfect !!!!!!!!!!!!!
I started with the "tall barn style shed plans" from a website called cheapsheds.com then modified from there. I think the plans were only about $10 but well worth it to get you started. If you modify like i did, it will cause a structural problem and you will have to add the bracing in like I did.
Stumbled across this video. I'm looking to DIY build a shed similar to this. I'd like the first floor to be uninsulated yard tool storage and small work bench area, the second floor would be a small insulated office. I'm planning to install a sub panel and put in two circuits, one for each floor. Do you have the plans you made for this shed available? I'd like to take a look at them to get an idea of what I want to build and possible cost (once lumber prices come back down to rational levels).
I dont have plans for this shed, i started with some basic plans on cheapshed.com and modified from there... those basic plans really help get you started so I highly suggest getting them ...I think it was called the "big and tall shed plans" on their website and was only about $10
This is pretty much exactly what I'm looking to build. Did you generate the plans for this shed or purchase? If you generated, how hard was it to get cleared with the city/county? Also if you don't mind saying, what was the approximate total build cost?
That would be fabulous for an art studio and the second floor I would have done it a bit higher as well as first floor for example instead of 9' a would go for 11' It is a very nice building indeed CONGRATULATION and enjoy it
Great Job. I want to build a slightly smaller building 16X24. I am having a hard time finding a detailed plan to buy for this project. Any suggestions?
The way I started was to google cheap shed plans and bought some basic plans for ~$10 online. I then looked at a lot of different youtube videos and made my specific plans by modifying the basic plans with things I saw on youtube. Some of the things were modified after the fact (not in my design but as I was building saw a need for it). I think the website I used was cheapsheds.com but there are several to choose from. You may want to have a poured concrete foundation if you are going to go as big as that... one of my regrets is not having a more substantial foundation (poured concrete slab or poured concrete piers). Good luck! It was a great learning experience to build a big shed like this even though I do not have much experience building, I am now thinking about building an addition to the house.
Recommendations on buiding one or buying a pre-fabricated shed ....as far as buying one already made, I think some of the big box stores (HD and Lowes) sell giant sheds, there are some videos on UTube... as for building a shed, it took me 2 yrs to complete building it myself and (although I didnt rush the build/took my time) so if you need it right away just buy one,
I am planning building something similar but with a skillion roof. Then attach another lean to shed 9x32 to the high side increasing square feet by 288 to 800 sqft total. Use it for retirement home.
Ryan what did the shed cost to build ? Your a wonderful carpenter. I want in my yard to live in and rent out my big house. Did you need a building permit or zoning issues ? Do you have to pay taxes on the shed.
Most of the two story barn style sheds I researched were around $10,000 and up. The most expensive are already built and delivered on site. A little less expensive are kits where everything is measured, cut and you get instructions. The cheapest way is going with your own plans, purchasing the lumber, measuring and building yourself from scratch. Building permits and zoning laws are different in every township/city.
@@usnva5638 I just saw one on UA-cam cheaper then that, from $3,000.00 some odd, and it was a 10×21 or 24. You pick the building and they come out and build it.
Nice shed. Btw, if you are going to insulate the roof, then you didn't need the soffit/ridge vents. The attic should be either insulated or vented, not both?
The way I was thinking about it is since the attic is cut open (with a large stairwell and windows) it is really no longer an attic but a 2nd story and that makes the ceiling more like a cathedral type ceiling. when i look at videos on insulating cathedral ceiling many of them use venting and insulation ...soffit vents, small air gap make with plastic or Styrofoam (covered by insulation) and then a ridge vent. As it is now the 2nd story gets way to hot in the summer so I feel like i need to do something. I haven't worked on the shed since I posted in November but when I start up again in a month or two I will have to address this so your advice/input is much appreciated.
Not a kit, built from scratch. I searched for cheep shed plans online (several available that cost about $10) and looked a lots of photos of sheds online (including many on youtube) to get me started ...then modified from there.
What do you call this style? It's cute as can be! Looking for a shed to become my forever home and this is very charming! Great job! Do you have plans you used?✌️❤️
The roof style is called Gambrel style, no set plans but I did start with basic shed plans from cheapsheds.com to get me started then modified from there.
What do you think about putting a shed roof on this design? I want it for solar and water collection. Do you think that would be uncomfortable on the Second Story?
Not sure what you mean by shed roof, but if you mean a standard 4/10 pitched triangle roof or a single side flat roof pitched to one side, you would either have to build up the 2nd story walls for a normal 2nd story or just have a single story since the gambrel style roof I use is for the purpose of creating space for a 2nd story. But I don't see why you couldn't do that, just make sure your design is structurally sound (the addition of internal walls perpendicular to the longest external walls help with structural support).
I am not in the construction industry nor am I a carpenter, I wanted a good guide to help with small projects such as small sheds and some remodeling around the house. So there’s a magic which is Shed Plan [ visit here *WoodBlueprints. Com* ]. This Shed Plan covers all my instructions from top to bottom in a step by step manner.
I have a couple questions, assuming this is the same exact shed I have been looking at, at home depot, how sturdy is the "loft"? Also, the building aspect, with the kit provided, does the stairs have to back that specific wall? I was hoping to back the bottom stairs against the 16ft wall and the upper part against the 32ft wall.
Not a kit, bought all materials slowly over time as I built the shed. The 2nd floor is made of 2"x10"x16ft #1 southern yellow pine spaced at 16" OC.... the walls and rafters and first story floor is all 16" OC. I have no idea what the Home Depot shed specification are but the 2x10's I used were rated to span 16Ft for a residential room (but remember that is with #1 SYP ..other wood types will vary on rating). If you search the web for wood types and span ratings, you can find charts for this topic.
Awesome! Thank you! The Home Depot one is built with 2x8 with 24" OC. Definitely would not be as sturdy in my opinion. I am leaning toward buying my own materials as well after looking closer into the details of provided. Thank you. Wonderful work by the way!
hey, Ed. that's quite a shed. quite the work load for you also, I'm sure. in the loft, what are you going to use it for? surely can't be a granny shack, eh?
Super nice shed though your french drain won't prevent surface water from entering the area under the shed. French drains are designed to move away water that stands in a location, not to deflect surface water. You'd need to build a swale to divert the surface water.
Pretty nice work. But when you say you 'had' to do something, like those braces on the second floor, who was doing that calculations, you or an engineer or the building dept? thank
I ran the mini wall idea by an architect who I asked as a favor for advice (this was free advice so just a quick one question and one answer reply)... here is what he said about the braces to stabilize the mini wall: "So, the lateral load is from the outside, not the springing of the roof truss. I'd extend the red braces down to below the top plate on the first floor wall about two feet. The concern would be to prevent any racking of the frame at the first floor wall plate." The plans I showed him had 5 braces on each side which is what i used.... So no guarantee, just some advice from an architect...i would strongly advise anyone wanting to live in such a building with this design to run it by a pro. An alternative would be to ditch the mini wall idea and just re-shape the roof so that the lower sides of the roof a much longer than the top sides of the roof and connect directly to the 2nd floor (this will change the look of the shed but might be stronger and not require bracing).
73 1/2 inches (on the outer edges) cut at 22.5 degree x 4 for the basic truss ....but also added a 12 inch overhang to each side (cut at 22.5 and 45 degrees). I got this info from a website called cheapsheds.com for about $10.... the plans they have helped immensely.
(Just a suggestion) Instead of gutters put a strip of aluminum above the door to deflect the water away from the doorway and don't put gutters on the rest of the shed. That way you don't have to clean out the gutters. looks like you have a lot of trees. put a little gravel on the ground where the gutters drip.
Made my own plans, but started with some cheap shed plans online and modified from there... do a google search for cheapsheds and should be able to get some basic plans for ~$10.
No plans for the specific design, but I did start things off with some basic plans to get me started and then I modified from there. I got the basic plans for ~$10 online at some place called cheapshed.com or something like that. If that company is still around, it was well worth the $10.
Yes! Definitely second the plans but warning don’t expect these to be 100% blueprints and all that. It’s definitely a great way to start and like he said modify to YOUR liking. I am using cheapsheds and will be living in one soon. Don’t have any videos on UA-cam but definitely might post some during the build and completion of it. Great job man! Astounding you did it by yourself in a year. Also I am probably gonna have to fight my kids for the spot under the stairs as well. Take care!
What are the pitches of the roof?. How far do the eaves / soffit overhang? Garage door looks to be 8'x8' in the video, what is the actual size? By now I've looked at hundreds of buildings on line, yours is the closest to what I'd like to build for my needs. I like the soffit that's wide enough for ventilation and both stories are full height. I'm just fine with the wall braces upstairs, I'd intend to use upstairs for storage anyway. We live in NW FL; wind can be a problem. It looks like this design would stand up to wind. We bought a house recently that doesn't have a big shed/storage. At my last place I easily filled up a 16x20 that a local company built and set up on the lot. I also had a 10x14 tin building (Arrow) that kept the lawn tractor and mower/s. Filled it up too. Yours is 1024 sq. ft on a 16x32 foot print. I'd be excited to begin, finish and use something like this. BTW I ran a 240V 4 wire 60Amp service to my last shed/shop. That way I had enough for air compressor and big table saw; with 240 you can also have hot water if desired.
The roof is a perfect half octagon so all 4 rafter pieces are are the same length (73.5 inches long... if i remember correctly) and 22.5 degree angles cuts. Then the overhangs can be any length (I think I used ~18inches, maybe even 20"). Raising the roof with the mini-wall weakened the structure making the braces necessary. You can make a stronger roof by not adding a mini wall and changing the shape of the roof so that the lower sides are longer and steeper and the top part of the roof is flatter... which would change the angles and lengths so just play around with the math to do this. I had already made all the roof rafters then decided I wanted the 2nd story to be taller so I had to add the miniwall and braces to achieve this. Yes the garage door is 8x8 (best price was at Menards (not sure if you have those down in Florida... but cheaper then lowes and home depot. If I had to do it again, i would put the front door on the same wall as the garage door... this frees up a wall. My biggest "if i did it over again" wish is that i went ahead and put a better foundation in.. the blocks are holding level but eventually they will settle and I will to jack up the shed and put extra wood to re-level. Also, if you live in a windy place even more reason not to use blocks. The shed gets really hot in the summer so do yourself a favor and go with 2x6 instead of 2x4 for the walls and rafters to give yourself more space for more insulation against the hot roof. Keep in mind the bigger you go the harder it is to heat/cool... but you already have experience with your other shed so you likely know better than I do how to deal with the heat. For shed plans, you can go online and find some really cheep shed plans (can find some for ~$10) places like cheepsheds.com ...this will give you a good starting spot to base you shed on then you can deviate from there and make it however you want but nice to have some sort of plans for reference. The particular website I mentioned has a good outline of how to make the roof rafters using OSB gussets... I found that 16' wide is about as wide as I could go by doing it myself, any wider would have required more help. I still need to run electric so thanks for the tip on what you ran (240v 4 wire 60 service). Even though it took me a while, I very much enjoyed building the shed. ...good luck with your build!
Yeah, if I had to do it again I would definitively use 2x6's for the rafters ...not only for the extra strength but extra room for insulation too. What you see in the video is at 13K for materials (it adds up quick).
Such an amazing job you've done. Do you have much carpentry experience? I have built a 10ft chicken coop and that's about it, and I need to build one of these now to live in, so I have been brainstorming wood sheds and plans online. Do you think I would be able to build a 16x32 2 story shed like what you've done if it came with detailed instructions and everything? I'm just not sure if I am getting myself into something that is too much for my experience level and need to go smaller or if it's not really that hard...
I have limited experience with building, but with all that is available on you-tube now a days... its amazing how much easier it is to do things like this. As long as you are strong enough to hoist building materials, it is fairly easy. The 16 feet is about as big as you can get with still being able to handle most things alone. Best advice I ever received was dont be afraid to do things like this. I was in the same boat, not sure if i was getting in too deep but as long as you are not in a hurry it is doable. I am so glad I built this shed, maybe not perfect, but it was very satisfying to build something like this. Hope this helps.. and good luck!
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You are extremely good A lot of people talk that talk but they cannot walk that talk but you walk your talk you are super good and what you do I don't know you from Adam to Eve but all I have to say I'm glad to see somebody with a good knowledge to do it themselves you look like the type of guy when you get old you were past all that knowledge to your kids One Love.
Good job, looks nice.
I built a 16x24 barn type 2 story garage about 3 years ago all by myself. Basically looks the same as your.
But I did a few things different. For example my foundation, I used 6x16x8 cement blocks. I dug a trench the dimension of the garage 8" deep. Packed in 1" of gravel. Then I set 1 layer of the block in the trench.
I pounded in every hole in the blocks a 3' peice of rebar. Then filled all the holes with cement. When I did that I also installed some bolts so I could attach the 2x6 bottom plate to the foundation. Cause I built the whole bottom floor with 2x6s . Then inside those blocks, for the garage floor I installed 12x12 cement pavers so I can drive on it.
For the garage door I built 2, six foot swinging doors and and attached a garage door opener to them. It's pretty cool if I say so myself.
Then the walk thru door I installed 2' back from the garage door so not to waste the whole wall.
I wanted as much wall space as I could get. So I can still pull my truck in there.
So I installed my stairs outside on the back 16' wall and built a 10'x6' deck with a 6' high fence around it. And installed a door for the second story.
I used 2x12x16 floor joists for the upstairs floor.
For the trusses I used gussets at the intersecting points. And for added support I added 2x2x6 peices attached inside the trusses from the top pitch to the side pitch of the roof.
It took me about 5 months every day after work and every weekend.
The best part is it saved me all kinds of money.
I built the entire garage for $9800.00.
The cheapest bid I got was $69000.00. But that would have been all up to code.
Anyway enjoy and take care.
Very nice job!! Thank you for taking time out of your busy day to share your video with us here on UA-cam. Looks like it would make a great off grid tiny house or guest house instead of storage.
Yvonne Luke I'm thinking about a man cave area
I understand that but, when I saw the video I could see a kitchen, living room and bedroom plus bathroom. I also saw a small home for elderly parents too.
Yvonne Luke..... perfect space for a cottage/cabin, for a couple. I did the same, laid out a floor plan. So cute!!!
Yvonne Luke..... perfect space for a cottage/cabin, for a couple. I did the same, laid out a floor plan. So cute!!!
I know right!
Wow! You call that a shed? It could be a perfect permanent house for me. Thanks for showing : )
That's a great building. I admire your willingness to make it a long term project, presumably to keep cost and debt down.
OUTSTANDING, YOU DID AN EXCELLENT JOB. MY HUSBAND AND I BUILT LIKE THAT BUT ONLY 1 STORY. LOOKS GREAT!!! START STORING FOOD AND WATER NOW FOR YOUR FAMILY!!!
Thanks for using all caps so I could hear you better
Happy I came across this video I'm getting ready to build a 16x26 shed similar to what you have. Thanks for posting a video. Since this was three years ago I'll check to see if you have updated vids on the finished product. 👍
Nice job! I built my recording studio back in my music days, and I built my shop at my Mt. Cabin which turned out to be my first wood working video for youtube. And like you, I did all of it by my self except for the siding which was 4 x 8 siding and my son helped me with it on the studio, but I actually figured out a way to do even that by myself on the shop by using cleats screwed to the outside floor joists and just setting the siding on it until I could get a couple screws in it. All my ceilings etc in the studio I did with a lift I rented. My shop does not have a finished out ceiling, just a metal roof with exposed rafters and purlins so I did not need the lift there. My shop is also built on a much steeper slope than yours, but I made a grid of my joists and put in several supports in the corners that the grid formed in several places and I dug a 6" hole about a foot and a half deep that the supports went down into and then I poured concrete into that. I think there were about 20 of those. Took a while but It does not budge lol! But you did quite a good job with your build. I relate!
Right on. Thank You Ernie.
Beautiful job man. I'm building my own little barn. It is much simpler than yours, but I've never done something like this before so it's taking a good amount of time. I started six months ago and I only have a floor and three walls built. You def have some real ability!
I did a somewhat similar upstairs deviation from the norm to add ceiling height in a garage I built for my father back in the 90's. I balloon framed it with a steel beam in the center due to span and width, but the balloon framing allows for added height upstairs...did the same on my brother in law's garage. Smart decision on your part...nothing worse than crouching in a storage area when you can elevate and make it actual useful for more than storage as you have done! Good job.
WOW what a great job. Eye to quality and it sure shows. I'd live in it comfortably.
if you put 4×4's 4ft. apart underneath, cemented in and secured with large lag bolts at the top of each 4×4, directly at each corner and ajoining 2×4's across, the wooden structure will be able to hold and the foundation will be entirely sure without any issues of weight-bearing, on floors.
OMG dude! You didn't skimp on anything on this project. I'll bet it was expensive. Nice work! 👍
My uncle built a house with a hip roof, held square dancing classes. Love these types of roofs, had a little porch off of one end.
Only someone who has done something like this can understand the feeling. Great job!!!
Suggestions moving forward would be to use 10/3 UG wire from 30 amp house to 20 amp shed due to the run. Otherwise you will be tripping in the house on a hard draw like a compressor start while using other stuff in the shed. The 10/3 will allow you two 110 circuits. ........... Again, fine job.
very nice,You've definitely swung a hammer before,looks like a professional job. I'm building a shop soon and am going to go big too.Barn roof looks nice, good job on the shingles
Sadly, I live in an area where city ordinances prohibit structures of that size. The largest i could build was 8x12 using the barn style roof similar to yours. Mine is simple storage. If had one like yours it would be dedicated to my full wood shop, now in 1/2 of my garage. I must move tools for each job. In your shed everything would be permanently set in place...it would be wonderful. Nicely done sir.
I like the idea that its not a loft but a second floor
Beautiful! Would love to have one similar but with the walk in door opposite side. Looking forward to seeing it when you have all your tools, etc. and insulation done.
Nice build. Like the height in the upper level. One thing you should take into consideration is the tree by the front door. Those pesky things have a habit of growing over time. I watched one, over time, push over a 1.5 foot square, concrete and stone fence pillar.
Nice ! Some one could totally live in this building.
I love this ! It would make a perfect guest house !
well done, very nice shed!!
We need an update of how it looks now! My wife and I are wanting to build something similar. Love the way yours turned out.
Keep meaning to, just been so busy with work and kids... Want to put out a compilation of photos and videos of when I built it... want to put out a what I would do differently if I built it again ...and also want to put out a "what it looks like now" video. Sneak peak, I have added insulation and a Minisplit heat pump... the first floor is more of a workshop and the kids have taken over the 2nd floor with a hangout place. I used plywood instead of drywall to close in the walls and keep a workshop/shed feeling. Thanks for the interest, I will try to get something out this summer (on vacation most of July right now).
Ed List That sounds awesome! Enjoy the vacation and thanks for the reply.
This is exactly what I need. Great garage space; then you have the 2nd level that would be great for a small office, craft shop, or storage.
I love it man. Thank you for sharing. I've been wanting to do something very similar to this for some time now. This video is my inspiration to start this weekend. lol. Thanks again!
LOOKS GREAT DAD !! LOTS OF WORK ! YOU WEN'T ALL THE WAY !! HAT'S OFF TO YOU !
What is the snow load rating on this building? Do you know? Awesome, I love it...
sorry have no idea what the snow load is, we dont get that much snow in southern ohio
Impressive build. Congratulations!!!
This is badass, and you did it by yourself even more badass, you are my new hero, how long did it take you and where did you get the plans
That's a fantastic job Ed
I could live in it, nice job.
Awesome job, thanks for sharing it with us.
what was approx cost of the supplies needed to build this "shed" (honestly we shouldnt even be calling this a shed. )
Absolutely amazing jobs sir what is the foundation made out of
Dug into dirt and make a crushed rock base the placed the blocks on top. After 6 years now still no shifting of pillars
So that I understand completely you dug a trench, you put in crushed rocks ,and then you put like 4 x 6 on top of the crushed rocks and then built on top of the 4 x 6 with the flooring and then the walls on up I see underneath there what looks like some concrete blocks, this is just amazing I don't want to bother you but if you could please reply thank you so much Richard
@@richardarsenault1471 No problem asking I don't mind discussing ...but no I didn't dig a trench, I only dug down about 5-6 inches for each pillar (pillar = 8"x16" concrete bricks stacked at different heights depending on grade) and filled with crushed limestone rocks. In hindsight, i wish I had built a more substantial foundation but so far my pillars (and shed) have remained completely level using this method and I dug those holes in 2015. There is a lot of sandstone right beneath the surface in my yard under my shed so I got lucky with very stable ground. If you are going to build a large shed like mine you may want to look into building a more substantial foundation than I did to protect your investment especially if you have unstable ground.
@@edlistI live in the city of riverside in Southern California 50 miles in from the ocean ann about 40 miles from the desert, the ground where I live is hard has a rock ,your ground looks damp and moist, which is why I'm so surprised ,but I just want to make sure my shop will be stable ,I just don't want to spend like $5000, for concrete, I'm searching other ways, thank you again for your help ,your shop is just amazing best regards Richard
Nice shed. Good size. Well done.
i could live in this...sweet job
I like your cabin it gives me alot of ideas on building my cabin here soon
Hope u supported the upper stairs! Nice Barn shed.
Thanks, yes, upper stairs are supported the same way normal stairs (ie stairs with a signle run) are.
Hi. That looks great. Can you please let me know where you purchased this shed?
Didn't buy it built it myself
Nice build. I like the upstairs roof height. Is the flooring insulated with wet proof barrier?
Yes, I put 2" Extruded Polystyrene (XPS) Rigid Foam Insulation under the floor as I installed it... there are a few videos from others on youtube about how to do this. Works well, glad I did it
That is awesome! Great work.
that is one awesome shed, reailly nice job
How is the floor engineered? Concrete piers or just on blocks? Spacing on the supports? What size lumber for floor joists and spacing, etc.? How has it held up? Given you put in a garage door, I would assume you have stored heavy equipment in there?
Just a question if you are worried about the building moving down the slope (slipage as you say) why didnt you pour footings for the building to sit on?
I should have... one of the things I list that I wish I would have done differently is to pour a proper foundation. But with that said, the land is very stable (lots of sandstone, just below the surface) so even without a foundation it should be okay. The extra rocks should slow down the rain from washing away the dirt I piled up around the concrete blocks. ...but again, if I had to do it again, I would have poured a proper foundation.
Sorry if I sounded crass with my comment. I didn't know if there was a reason for it. I am building a small cabin myself and going to put it on blocks. I was asking so if there was a mistake I didn't make it also. thanks for the reply!
not crass at all, this is one of the more common comments (and rightly so). if you put it on blocks, put it high enough to be able to work under (be able to go under and jack it up if/when it starts to settle)... this will also allow more air under and prevent rot. I already jacked up my shed and put 2 more sets of blocks (so 8 inches higher).
where did you get your lap siding and soffet material? Brand. I'm having trouble sourcing 3 in lap here in the Spokane, Wa area. thanks
siding mostly from Menards, soffet mainly from Lowes (I would think HD also has it)
Where did you get the floor plans.?? I want to do a 16 × 26. Just not sure where to find build plans.
Nice job on the shed, looks great. It's bigger then my house, really it is.
Great job, thus far. Thanx 4 sharing. Lol...let Michael have his fort. 😉
A guy could live in that sucker, as a home. nice garage/shed!
This is the size/layout I'm looking to build to live in. Definitely well livable.
Very nice building and video. Where did you obtain plans for the building (especially the roof and the structure for the 19” wall and roof on the second story)?
This shed has no official plan. I started by buying a basic shed plan for ~$10 online by googling "cheap shed plans". Then looked at various plans online and on youtube to get ideas and came up with this shed. I would not recommend using my idea for the 2nd floor 19" mini-wall since it created a weak structure causing me to have to add the "ugly" braces to save the structure. Instead I suggest either making it like a pole barn (using long poles that span the 1st and 2nd story walls instead of stacking the 2nd story mini-wall on top of the 1st story) or changing the roof shape so that the first part of the roof connects directly to the 2nd story base, is more vertically pitched, and is longer so that the roof itself acts like a 2nd story wall. ...But if you don't mind the braces and/or add interior walls inside the shed, the mini-wall works fine.
Looks terrific!
How did you hang the plywood for the roof and shingle? Did you use a lift or scaffolding?
homemade scaffolding
, garage, workshop, storage on first floor, apartment on second floor, all in one building, perfect. especially in colder weather, pull inside, go upstairs, without going outside, perfect !!!!!!!!!!!!!
This is great. Did you follow plans to build this? I haven’t found a loft shed with the extra height like you have here.
I started with the "tall barn style shed plans" from a website called cheapsheds.com then modified from there. I think the plans were only about $10 but well worth it to get you started. If you modify like i did, it will cause a structural problem and you will have to add the bracing in like I did.
Stumbled across this video. I'm looking to DIY build a shed similar to this. I'd like the first floor to be uninsulated yard tool storage and small work bench area, the second floor would be a small insulated office. I'm planning to install a sub panel and put in two circuits, one for each floor. Do you have the plans you made for this shed available? I'd like to take a look at them to get an idea of what I want to build and possible cost (once lumber prices come back down to rational levels).
Nevermind, I see the comment on your 2 year follow up video. Great videos, good job on the shed.
I dont have plans for this shed, i started with some basic plans on cheapshed.com and modified from there... those basic plans really help get you started so I highly suggest getting them ...I think it was called the "big and tall shed plans" on their website and was only about $10
What angles did you make your roof? And also, how high is your short wall on the upper floor?
45 deg Angles on roof (so cut each peice of wood 22.5 deg ), and the little wall was 19" high.
@@edlist Thank you very much. Love the design
Excellent Video
This is pretty much exactly what I'm looking to build. Did you generate the plans for this shed or purchase? If you generated, how hard was it to get cleared with the city/county? Also if you don't mind saying, what was the approximate total build cost?
That would be fabulous for an art studio and the second floor I would have done it a bit higher as well as first floor for example instead of 9' a would go for 11' It is a very nice building indeed CONGRATULATION and enjoy it
Great Job. I want to build a slightly smaller building 16X24. I am having a hard time finding a detailed plan to buy for this project. Any suggestions?
The way I started was to google cheap shed plans and bought some basic plans for ~$10 online. I then looked at a lot of different youtube videos and made my specific plans by modifying the basic plans with things I saw on youtube. Some of the things were modified after the fact (not in my design but as I was building saw a need for it). I think the website I used was cheapsheds.com but there are several to choose from. You may want to have a poured concrete foundation if you are going to go as big as that... one of my regrets is not having a more substantial foundation (poured concrete slab or poured concrete piers). Good luck! It was a great learning experience to build a big shed like this even though I do not have much experience building, I am now thinking about building an addition to the house.
I need a recommendation for a nice two story shed and work shop I have a small lawn business so pls give me a recommendation
Recommendations on buiding one or buying a pre-fabricated shed ....as far as buying one already made, I think some of the big box stores (HD and Lowes) sell giant sheds, there are some videos on UTube... as for building a shed, it took me 2 yrs to complete building it myself and (although I didnt rush the build/took my time) so if you need it right away just buy one,
Great job. Love the design
Hello, great video! Who is the company that you got the material from? Was it a kit home?
Great job dude!!
same size as what im getting built, but i have the garage door moved over so i have room for a mandoor next to it + that goes straight into stairs.
I am planning building something similar but with a skillion roof. Then attach another lean to shed 9x32 to the high side increasing square feet by 288 to 800 sqft total. Use it for retirement home.
Ryan what did the shed cost to build ? Your a wonderful carpenter.
I want in my yard to live in and rent out my big house. Did you need a building permit or zoning issues ?
Do you have to pay taxes on the shed.
Most of the two story barn style sheds I researched were around $10,000 and up. The most expensive are already built and delivered on site. A little less expensive are kits where everything is measured, cut and you get instructions. The cheapest way is going with your own plans, purchasing the lumber, measuring and building yourself from scratch.
Building permits and zoning laws are different in every township/city.
@@usnva5638
I can't agree more. Except Loew's has one for $8,000.00 I remember seeing.
@@jmjrosary4697 That's a great deal! Does it come already assembled?
@@usnva5638
I just saw one on UA-cam cheaper then that, from $3,000.00 some odd, and it was a 10×21 or 24.
You pick the building and they come out and build it.
Nice shed. Btw, if you are going to insulate the roof, then you didn't need the soffit/ridge vents. The attic should be either insulated or vented, not both?
The way I was thinking about it is since the attic is cut open (with a large stairwell and windows) it is really no longer an attic but a 2nd story and that makes the ceiling more like a cathedral type ceiling. when i look at videos on insulating cathedral ceiling many of them use venting and insulation ...soffit vents, small air gap make with plastic or Styrofoam (covered by insulation) and then a ridge vent. As it is now the 2nd story gets way to hot in the summer so I feel like i need to do something. I haven't worked on the shed since I posted in November but when I start up again in a month or two I will have to address this so your advice/input is much appreciated.
Where did you buy that kit for she'd I'm from Michigan
Not a kit, built from scratch. I searched for cheep shed plans online (several available that cost about $10) and looked a lots of photos of sheds online (including many on youtube) to get me started ...then modified from there.
What do you call this style? It's cute as can be! Looking for a shed to become my forever home and this is very charming! Great job! Do you have plans you used?✌️❤️
The roof style is called Gambrel style, no set plans but I did start with basic shed plans from cheapsheds.com to get me started then modified from there.
How did you install the stairs? Do you happen to have the video? I’m planning on remodeling my basement stairs to what you have done there
What was the price of everything?
What do you think about putting a shed roof on this design? I want it for solar and water collection. Do you think that would be uncomfortable on the Second Story?
Not sure what you mean by shed roof, but if you mean a standard 4/10 pitched triangle roof or a single side flat roof pitched to one side, you would either have to build up the 2nd story walls for a normal 2nd story or just have a single story since the gambrel style roof I use is for the purpose of creating space for a 2nd story. But I don't see why you couldn't do that, just make sure your design is structurally sound (the addition of internal walls perpendicular to the longest external walls help with structural support).
...also if you build, I would recommend adding a more substantial foundation than I did, one my regrets now that it is built.
How much spent on each part. That would be a nice video
Very nice job.
Nice job!! Looks good
I wish you would build me one of these to live in. It's perfect!
I'd like you to build me one too .nice
@OleSnappy I'll just go out on a limb here and say that neither of you could live in a shed.
@OleSnappy
Shed into home all day long on youtube.
I am not in the construction industry nor am I a carpenter, I wanted a good guide to help with small projects such as small sheds and some remodeling around the house. So there’s a magic which is Shed Plan [ visit here *WoodBlueprints. Com* ]. This Shed Plan covers all my instructions from top to bottom in a step by step manner.
I like the plywood. Good choice.
It will be nice to see when you finish it
I have a couple questions, assuming this is the same exact shed I have been looking at, at home depot, how sturdy is the "loft"? Also, the building aspect, with the kit provided, does the stairs have to back that specific wall? I was hoping to back the bottom stairs against the 16ft wall and the upper part against the 32ft wall.
Not a kit, bought all materials slowly over time as I built the shed. The 2nd floor is made of 2"x10"x16ft #1 southern yellow pine spaced at 16" OC.... the walls and rafters and first story floor is all 16" OC. I have no idea what the Home Depot shed specification are but the 2x10's I used were rated to span 16Ft for a residential room (but remember that is with #1 SYP ..other wood types will vary on rating). If you search the web for wood types and span ratings, you can find charts for this topic.
Awesome! Thank you! The Home Depot one is built with 2x8 with 24" OC. Definitely would not be as sturdy in my opinion. I am leaning toward buying my own materials as well after looking closer into the details of provided. Thank you. Wonderful work by the way!
hey, Ed. that's quite a shed. quite the work load for you also, I'm sure. in the loft, what are you going to use it for? surely can't be a granny shack, eh?
Thanks... I'm thinking the loft will be all storage (gets too hot in the summer to work up there) and the 1st floor will be a work shop.
In USA a large percentage of housing is made out of wood so how is a big shed any different?
Nice work.
Super nice shed though your french drain won't prevent surface water from entering the area under the shed. French drains are designed to move away water that stands in a location, not to deflect surface water. You'd need to build a swale to divert the surface water.
Pretty nice work. But when you say you 'had' to do something, like those braces on the second floor, who was doing that calculations, you or an engineer or the building dept? thank
I ran the mini wall idea by an architect who I asked as a favor for advice (this was free advice so just a quick one question and one answer reply)... here is what he said about the braces to stabilize the mini wall:
"So, the lateral load is from the outside, not the springing of the roof truss.
I'd extend the red braces down to below the top plate on the first floor wall about two feet. The concern would be to prevent any racking of the frame at the first floor wall plate."
The plans I showed him had 5 braces on each side which is what i used.... So no guarantee, just some advice from an architect...i would strongly advise anyone wanting to live in such a building with this design to run it by a pro. An alternative would be to ditch the mini wall idea and just re-shape the roof so that the lower sides of the roof a much longer than the top sides of the roof and connect directly to the 2nd floor (this will change the look of the shed but might be stronger and not require bracing).
Thanks Ed. Nice work
GREAT JOB ...i like this to live in, big enough for one person even two...tiny house
Where did you buy that ?? Or you make it by yourself?
Made it myself
Hey buddy building a shed this same size do you remember the truss dimensions ?
73 1/2 inches (on the outer edges) cut at 22.5 degree x 4 for the basic truss ....but also added a 12 inch overhang to each side (cut at 22.5 and 45 degrees). I got this info from a website called cheapsheds.com for about $10.... the plans they have helped immensely.
would make a great second home or cabin
Was this a pre cut shed plan that you built and critiqued?
not a kit, built from scratch
Ed List drew plans ,very nice
nice, do you have a print of your truss that you can give out....
I used this youtube video to make the trusses: "How To Build Barn Style Shed Roof Trusses" ua-cam.com/video/7Ul_9GmqBbc/v-deo.html
(Just a suggestion) Instead of gutters put a strip of aluminum above the door to deflect the water away from the doorway and don't put gutters on the rest of the shed. That way you don't have to clean out the gutters. looks like you have a lot of trees. put a little gravel on the ground where the gutters drip.
Where can I get the plans and material list for it?
Made my own plans, but started with some cheap shed plans online and modified from there... do a google search for cheapsheds and should be able to get some basic plans for ~$10.
CAN WE MAKE A 16' x 32' Two Story GARAGE ON PRIVATE HOUSE IN GLEN COVE LONG ISLANG ?
IS ANY PROBLEM WITH THE TOW ?
I'm looking to do the same thing. Where did you get the plans for that specific design? Turned out GREAT
No plans for the specific design, but I did start things off with some basic plans to get me started and then I modified from there. I got the basic plans for ~$10 online at some place called cheapshed.com or something like that. If that company is still around, it was well worth the $10.
Yes! Definitely second the plans but warning don’t expect these to be 100% blueprints and all that. It’s definitely a great way to start and like he said modify to YOUR liking. I am using cheapsheds and will be living in one soon. Don’t have any videos on UA-cam but definitely might post some during the build and completion of it. Great job man! Astounding you did it by yourself in a year. Also I am probably gonna have to fight my kids for the spot under the stairs as well. Take care!
How high was the ceiling on the 2nd floor?
9 feet
What are the pitches of the roof?. How far do the eaves / soffit overhang? Garage door looks to be 8'x8' in the video, what is the actual size? By now I've looked at hundreds of buildings on line, yours is the closest to what I'd like to build for my needs. I like the soffit that's wide enough for ventilation and both stories are full height. I'm just fine with the wall braces upstairs, I'd intend to use upstairs for storage anyway. We live in NW FL; wind can be a problem. It looks like this design would stand up to wind. We bought a house recently that doesn't have a big shed/storage. At my last place I easily filled up a 16x20 that a local company built and set up on the lot. I also had a 10x14 tin building (Arrow) that kept the lawn tractor and mower/s. Filled it up too. Yours is 1024 sq. ft on a 16x32 foot print. I'd be excited to begin, finish and use something like this. BTW I ran a 240V 4 wire 60Amp service to my last shed/shop. That way I had enough for air compressor and big table saw; with 240 you can also have hot water if desired.
The roof is a perfect half octagon so all 4 rafter pieces are are the same length (73.5 inches long... if i remember correctly) and 22.5 degree angles cuts. Then the overhangs can be any length (I think I used ~18inches, maybe even 20"). Raising the roof with the mini-wall weakened the structure making the braces necessary. You can make a stronger roof by not adding a mini wall and changing the shape of the roof so that the lower sides are longer and steeper and the top part of the roof is flatter... which would change the angles and lengths so just play around with the math to do this. I had already made all the roof rafters then decided I wanted the 2nd story to be taller so I had to add the miniwall and braces to achieve this. Yes the garage door is 8x8 (best price was at Menards (not sure if you have those down in Florida... but cheaper then lowes and home depot. If I had to do it again, i would put the front door on the same wall as the garage door... this frees up a wall. My biggest "if i did it over again" wish is that i went ahead and put a better foundation in.. the blocks are holding level but eventually they will settle and I will to jack up the shed and put extra wood to re-level. Also, if you live in a windy place even more reason not to use blocks. The shed gets really hot in the summer so do yourself a favor and go with 2x6 instead of 2x4 for the walls and rafters to give yourself more space for more insulation against the hot roof. Keep in mind the bigger you go the harder it is to heat/cool... but you already have experience with your other shed so you likely know better than I do how to deal with the heat. For shed plans, you can go online and find some really cheep shed plans (can find some for ~$10) places like cheepsheds.com ...this will give you a good starting spot to base you shed on then you can deviate from there and make it however you want but nice to have some sort of plans for reference. The particular website I mentioned has a good outline of how to make the roof rafters using OSB gussets... I found that 16' wide is about as wide as I could go by doing it myself, any wider would have required more help. I still need to run electric so thanks for the tip on what you ran (240v 4 wire 60 service). Even though it took me a while, I very much enjoyed building the shed. ...good luck with your build!
Only 2x4's for the roof? Otherwise, very nice. How much did something like that cost?
Yeah, if I had to do it again I would definitively use 2x6's for the rafters ...not only for the extra strength but extra room for insulation too. What you see in the video is at 13K for materials (it adds up quick).
Such an amazing job you've done. Do you have much carpentry experience? I have built a 10ft chicken coop and that's about it, and I need to build one of these now to live in, so I have been brainstorming wood sheds and plans online. Do you think I would be able to build a 16x32 2 story shed like what you've done if it came with detailed instructions and everything? I'm just not sure if I am getting myself into something that is too much for my experience level and need to go smaller or if it's not really that hard...
I have limited experience with building, but with all that is available on you-tube now a days... its amazing how much easier it is to do things like this. As long as you are strong enough to hoist building materials, it is fairly easy. The 16 feet is about as big as you can get with still being able to handle most things alone. Best advice I ever received was dont be afraid to do things like this. I was in the same boat, not sure if i was getting in too deep but as long as you are not in a hurry it is doable. I am so glad I built this shed, maybe not perfect, but it was very satisfying to build something like this. Hope this helps.. and good luck!