Several years ago in St Martin, we met a fellow cruiser who showed us jars of coins, watches, rings & other jewelry, along with boat bits and other interesting things, that he had found with his metal detector. A lot of it came from tourists swimming or snorkeling near the beach. It was quite impressive.
That anchor system looks like it's holding well for dinghy in light chop but a length of chain between anchor & line might keep rope more horizontally planed on the bottom & prevent it from yanking upward when it comes tight under shock load.
An entertaining feel good sailing channel with stand up comedy! Next thing you know, I'll be learning how to renovate a 60' sailboat! And the introduction to marine metal detectors is right up our alley! I want to see magnetic retrieval, and dinghy anchor dragging to snare a lost outboard, and reaching your arm under big rocks to grab moray eels! You DO want to go over 150K Subscribers, right?
@@SailLife Maybe you two can make mobiles from found shackle pins and the like. As both of you often show me treasure is where you find it. All the best.
French anchoring ! Another term to add to the Sail Life dictionary! And now we know it's a thing. I hate to throw stones but It happened to us in Greece preparing for Storm Daniel last summer. We found a somewhat protected bay in the Peloponnese as the storm was ramping up and had it pretty much to ourselves until a French boat showed up and anchored extremely close even if we weren't expecting near gale/ gale winds. I put it down to PTSD as he shredded his mainsail coming in. Now we know better. Regardless, another good video.
Hi Mads, As for snubber rope stuff, as a climber i might say, have a look at the Klemheist knot. Make it with a piece of climbing webbing or rope and for a loop a double fishermans knot. Plain, super simple, does not lock up, the harder you pull the more in grabs and with no load loose. Anchor chain is easy but works on a rope too. Like want to take of the rope of a winch without lose the tension, just add a klemheist on the rope, attach it, and loosen the winch. Want to make a 3:1 pul system etc etc,. super handy knot on a boat. Other nice to know knots with same function. grab on load and loose easy under no load no load: the autoblock knot, Distel hitch, Valdotain Tresse Knot.
The Excalibur 2 is not middle of the road, it is the best detector you can get for what you are using it for. I have two of them. Searching under boats will be hard because of the amount of trash targets you'll have to dig up and limited air supply. If you want gold, silver, platinum and diamond rings then you should stick to popular tourist beaches and search in knee to neck deep water. Get a scoop too, you're gonna need it when not scuba diving. When I'm diving I am fairly over weighted to keep from getting tossed around too much while digging up targets. You can just fan the sand and rubble away until you see the target, no need for gloves. The bad news is that you must dig EVERY signal! A gold ring with a crack in it can sound just like a rusty fish hook and a pull tab can sound just like a ring.
Thank you so much for the awesome tips :) What are the rules typically like for metal detecting on a beach (assuming it's not some kind of private beach) ?
Haha, love the ending! Been following this channel for many years. Variety is the spice of life so I think you most definitively share some metal detection adventures!
Hey, if people don't like the metal detector content, just remind them: "This is my channel. There are other like it, but this one is mine!" SCNR. I'm going to continue watching anyway. :-)
For the condensation, here goes a tip..... Do place plastic tubing (hoses) directing the "blow" to a plastic bottle... You can tide them with simple zip ties, it works great! You can reusetank is transfered to the water of the an old drinking water bottle for that, and it will be easier and cleaner to use... Another tip is to use a large size bucket where you place the filling tank (it needs to be upwards), so a good part of the heat of the bucket, bear in mind to have the tank's valves out of the water, while charging or manipulating pre charge, you don't want to introduce moist in them!
I made many yacht tenders over a 15 year period. If you add a fin onto your motor it will help with the load distribution in the dinghy. Also, while this is somewhat of a personal preference, the outboard is designed to be used by someone sitting on the starboard side of the dinghy. The handle is offset for this purpose.
Mads! I lost my gold wedding ring 25 years ago! It was on my honeymoon at Hilton Head island. The wife was REAL pleased with me. See if you can find it for me😂 P.S. We loved the end of the video.
I like the metal detector segment, as it goes perfectly with sail cruising. And if you ever do find chests filled with gold, sell it on the black market or melt it down. Otherwise, various governments will come for your treasure, leaving you with nothing except massive attorney bills.
I gave up my jacket style BCD after about 25 dives. I hated it. Felt so restricted. I went full on DIR and have back plate and wings now. I also carry the analog pressure gauge. My computer is hoseless, and I carry my backup reg around my neck and my primary is on a 7' hose. Need to share air, no 'hugging' your buddy. Hand over the long hose reg and go to your backup. Between the built in weight of a backplate (7lbs), and the freedom of not having the that jacket...oh the diving got so much more enjoyable. Especially diving in the cold water and you have a dry suit, argon bottle, dive light, deco bottle, etc. all hanging on your harness...much better than hanging on that 'jacket'.
Fully understand your “French anchoring” remark.We are sailing here in San Blas and getting so frustrated of all the French boats anchoring almost alongside. Not to mention that I have to see the first French boat properly setting it’s anchor. Due to this, we had many sleepless nights to keep an eye on our neighbors boat when the weather conditions were marginal….
"Ask Jeff Williams" on UA-cam will instruct on how to set up the delicate detecting instrument. My Great Grandfather left Randers DK for U.S. around 1910 for Chicago and later to Baldwin county Alabama. Opelika is our home. Love your channel.
Yes, that dive flag next to the motor was not very visible. Glad you are going to look at relocating it. Maybe one on the front of the dingy and one in the water. 🙂
Next boat dream list … have the dive compressor draw air from the air conditioner. The cooler dryer air will increase the performance of the dive compressor. Or least I think so. I had a brownie brand compressor with a port in the cockpit.
If you want to try stopping the growth on your ropes and props hulls try coconut oil. ... Even in the water coconut husks don't accumulate growth. You can add it to cheap bottom paint and prop coatings. Try it on your ropes.
Use dyneema soft shackles on your snubber vs. those stupid hooks. It's totally secure, and safe. You can deploy and retrieve the bridle on the deck because the soft shackles easily go over your rollers.
This is a really interesting technique! For better surface finish try "ironing" in the slicer. It might require a few attempts to perfect but should be worth it. There is PVA in printable filament form. I wonder if that may be useful somehow?
You could drag a couple of powerful small salvage magnets ( like some people drop down from bridges) behind each transom end of the dinghhy pontoons in good seabottom. Work in a grid pattern and tell the French neighbors to move because their keeping you from making money.
I know where a shipwreck is on St. Croix. It’s called Long Reef. A few years ago I found several 1920’s silver spoons and forks and even a buffalo nickel, a ships bell and lots of small items, but I needed a metal detector to find more. You are just a few hours sail from there now. It’s only in 8 feet of water on the south side it’s called long reef next to Ruth Island. If you scout around there you will find ropes lying on the bottom which will lead you to the wreck. I’m assuming it was 1920’s and Danish. When you come out of molasses pier it’s just a 1/4 mile or so on your left. You could anchor in Fredriksted and dinghy around.
If you can get ahold of one of the first-generation M1 Mantus Chain Hooks they are much easier to hook and unhook while dangling over the bow pulpit. I've done it hundreds of times and it's pretty simple once you get the "trick" of lining up the crossing of the two crossing slots on the hook. The new M2 claw hook is supposedly easier to pull through the anchor roller while installed so you could theoretically pull the thing up and work on it there and then undo the bridle ends and pull those up through the roller too. It seems to me that this would cause a bit of wear and tear on the lines since the chain and roller bits would be chafing on them as they all pulled around the roller together. The Mantus-made bridle we got with our package deal has chafe protection for a few feet near the hook end to account for this. Still, they might get a bit tangled around each other in the process. This all seems a bit janky to me and I am glad I own the original hook so it is easy to just slap it on and off leaning over the edge the bow. No worries. The hook itself should last forever and the plastic gate is a lot more durable than the flimsy rubberband holder thingie on the "improved" M2 version. I love all things Mantus but I prefer the older hook here. Ours was bought in the winter of 2016/2017 at the Chicago boat show and has heen used hard over the years but original first plastic gate still has a little life left in it, but will soon need to be replaced as wear and tear on the plastic is evident. A few years back when the new hook came out and it became apparent that the old one wasn't going to be made or supported any longer we bought literally 10 extra plastic gate thingies so that we could go on using our old hook forever. If we get a minimum of 5-6 years of use out of each one then 10 spares should last us the rest of our cruising lives.
Make sure you check local laws, a lot of places you can't metal detect, they don't want people taking valuables from their country, some places you can get jail time if you don't have a permit
Love the new early retirement doohickey, Mads - spicey variety! just don’t strike it rich and retire the channel! As a veterinarian and proud owner of a poop gull mermaid, Ava, what was the animal you’d created that made a very brief appearance a couple weeks ago?
Hello Mads, I'm trying to track down those cam latches you used to lock your companionway stairs in place...I can't find them no matter what I search, where did you get them?
I prefer to take my snubber back to midship cleat, keeping the hook/knot out of the water, that gives me stretch and resilience, my snubber line is on the skinny, also gives me stretch, unfortunately my hook does not go to well over the roller, rope is best for that. Am still undecided about making the line that joins snubber and chain sacrificial.
Go closer to the shore and in the sand where folks would picnic etc. Jewelry, coins and watches kind of common there and the tuning you are going to do is good. Test with modern coins watches and then gold silver etc in no sand cover a few inches of sand and a foot or so. You can do that on the beach. Then in the water. Learning how to tune and discriminate between the materials your detector finds and it's reaction to them will help a ton. Good hunting!
Put double siided Velcro strip over the mantis rubber piece to reinforce it and you can pull it straight into rhe deck without damaging the the rubber strap.
Middle of the road metal detector? That's an Excalibur II. They go for around 1800-2000 dollars. That's not middle of the road in my book. Good hunting. If your are going to hit good targets that is the detector to do it with.
@@SailLife we are on Bonaire atm and was here in October also, it is very good the corals are still in very good condition, as with most things there issues here (sctld look it up it's quicker) but follow the advice and have some great dives, also the free massive salt crystals from the salt mining facility is worth the trip 😂.
The best place to do metal detecting is the beach, think about people loosing rings even watches... I found diamond rings (wedding) on the beach... that was years ago....
love the metal detector. please dont eliminate it from future videos.
Thanks! Hopefully I find something fun some time so we have something interesting to film :)
More treasure!
Absolutely continue with the detector
A big thumbs up for more Treasure hunting!!
Metal detectors..diving...and sailing is the perfect combination....let the fun begin..
Several years ago in St Martin, we met a fellow cruiser who showed us jars of coins, watches, rings & other jewelry, along with boat bits and other interesting things, that he had found with his metal detector. A lot of it came from tourists swimming or snorkeling near the beach. It was quite impressive.
That sounds very cool!
There's a video out there that someone took off a GoPro he found ... :-)
That anchor system looks like it's holding well for dinghy in light chop but a length of chain between anchor & line might keep rope more horizontally planed on the bottom & prevent it from yanking upward when it comes tight under shock load.
Agree. About 2m of 6 or 8mm short link chain :)
You guys are a hoot! Loved the ending. 😂😂
Thanks :D
When the cat’s away, the mouse will… sand. Glorious! 😂
15:45 - No Mads, the metal detector is exactly what we want to see. Keep at it!
It was fun to be introduced to several new characters including Mr. Light Weather Snubber, Mr. Money Maker aka Mr. Excalibur and Mr. Hooky Thing.
It's quite that cast around here ;)
An entertaining feel good sailing channel with stand up comedy! Next thing you know, I'll be learning how to renovate a 60' sailboat! And the introduction to marine metal detectors is right up our alley! I want to see magnetic retrieval, and dinghy anchor dragging to snare a lost outboard, and reaching your arm under big rocks to grab moray eels! You DO want to go over 150K Subscribers, right?
Nice break from “boat building Sunday evening” with Sail Life. 🥰
Gotta get one of those metal detectors! 😅
It's something I've always wanted do :) Who knows if I'll ever find anything other than trash ;) I hope your build is progressing smoothly :)
@@SailLife Thanks! Build is going now forward rather quickly thanks to the CNC-cut parts! 🙂
Panu, first you need to finish building the boat and then get a metal detector.
@@sheerluckholmes5468 What if I want fo find hidden treasures _in_ my boat. Like that one screw that I forgot to get off... 😅
Having fun things to do on a boat is always good. Don’t get rid of the metal detector. Great episode. Thank you.
I’m a native English speaker and find nothing wrong with his use of the word ‘super’. In fact, I find it super spiffy and glorious.
Haha, thank you so much :D
I agree! Super is a super useful word that I think is pretty ubiquitously understood, at least in germanic languages (which english is a member of) :)
Super is a perfectly cromulent word used in this way. I believe it embiggins the language.
His command of the English language is pretty impressive, even the slang.
My husband would love the underwater metal detector. We used to dive prior to Parkinson’s. Enjoy the diving.
Hi , yes your both having fun , so the DIY can wait for a few hours and keep sailing and making your videos . 😉👍 to him and 💅 to her .
Can’t wait to see what you find with your new metal detector!
Fingers crossed for treasure! ;)
@@SailLife Maybe you two can make mobiles from found shackle pins and the like. As both of you often show me treasure is where you find it.
All the best.
French anchoring ! Another term to add to the Sail Life dictionary! And now we know it's a thing. I hate to throw stones but It happened to us in Greece preparing for Storm Daniel last summer. We found a somewhat protected bay in the Peloponnese as the storm was ramping up and had it pretty much to ourselves until a French boat showed up and anchored extremely close even if we weren't expecting near gale/ gale winds. I put it down to PTSD as he shredded his mainsail coming in. Now we know better. Regardless, another good video.
Hi Mads, As for snubber rope stuff, as a climber i might say, have a look at the Klemheist knot. Make it with a piece of climbing webbing or rope and for a loop a double fishermans knot. Plain, super simple, does not lock up, the harder you pull the more in grabs and with no load loose. Anchor chain is easy but works on a rope too. Like want to take of the rope of a winch without lose the tension, just add a klemheist on the rope, attach it, and loosen the winch. Want to make a 3:1 pul system etc etc,. super handy knot on a boat. Other nice to know knots with same function. grab on load and loose easy under no load no load: the autoblock knot, Distel hitch, Valdotain Tresse Knot.
Mads your the show, it does not matter what you do. We watch you...good luck with the metal detector, I enjoy mine, just for the dream.
I really like the metal detector aspect, curious to see how the laws/regulations vary throughout the Caribbean jurisdictions.
The Excalibur 2 is not middle of the road, it is the best detector you can get for what you are using it for. I have two of them. Searching under boats will be hard because of the amount of trash targets you'll have to dig up and limited air supply.
If you want gold, silver, platinum and diamond rings then you should stick to popular tourist beaches and search in knee to neck deep water. Get a scoop too, you're gonna need it when not scuba diving.
When I'm diving I am fairly over weighted to keep from getting tossed around too much while digging up targets. You can just fan the sand and rubble away until you see the target, no need for gloves.
The bad news is that you must dig EVERY signal! A gold ring with a crack in it can sound just like a rusty fish hook and a pull tab can sound just like a ring.
Thank you so much for the awesome tips :) What are the rules typically like for metal detecting on a beach (assuming it's not some kind of private beach) ?
I'm in Hawaii and can only say that for here, Some marine preserves are off limits.
Haha, love the ending! Been following this channel for many years. Variety is the spice of life so I think you most definitively share some metal detection adventures!
Thank you so much :)
Hey, if people don't like the metal detector content, just remind them:
"This is my channel. There are other like it, but this one is mine!"
SCNR. I'm going to continue watching anyway. :-)
Oh glorious treasure hunting sounds ten times better than sanding!
For the condensation, here goes a tip..... Do place plastic tubing (hoses) directing the "blow" to a plastic bottle... You can tide them with simple zip ties, it works great! You can reusetank is transfered to the water of the an old drinking water bottle for that, and it will be easier and cleaner to use...
Another tip is to use a large size bucket where you place the filling tank (it needs to be upwards), so a good part of the heat of the bucket, bear in mind to have the tank's valves out of the water, while charging or manipulating pre charge, you don't want to introduce moist in them!
Becoming also the floating detectorist is not off brand. It will be a blast to see you find stuff.
We have the same dinghy anchor and love it. We used it in the Bahamas this season, you will be glad you purchased it.
Love the ending!
Love the metal detector , can't wait to see more!
I made many yacht tenders over a 15 year period. If you add a fin onto your motor it will help with the load distribution in the dinghy. Also, while this is somewhat of a personal preference, the outboard is designed to be used by someone sitting on the starboard side of the dinghy. The handle is offset for this purpose.
Love your videos. Even when there are problems you two make it a pleasure to watch…unlike some of the other whiny sad sacks.
Thank you so much :)
Loved the metal detector, would be really interesting to see what loot you find!
You two make me smile. Seeee youuuu!!!
I think the metal detector is bang on for your channel.
Hilarious ending. Mads sooo happy for more glorious ....
Mads! I lost my gold wedding ring 25 years ago! It was on my honeymoon at Hilton Head island. The wife was REAL pleased with me. See if you can find it for me😂 P.S. We loved the end of the video.
I like the metal detector segment, as it goes perfectly with sail cruising. And if you ever do find chests filled with gold, sell it on the black market or melt it down. Otherwise, various governments will come for your treasure, leaving you with nothing except massive attorney bills.
I love this glorious channel! Well done, Mads and Ava! Cheers from MICHIGAN!
You are a hoot, Max
I gave up my jacket style BCD after about 25 dives. I hated it. Felt so restricted. I went full on DIR and have back plate and wings now. I also carry the analog pressure gauge. My computer is hoseless, and I carry my backup reg around my neck and my primary is on a 7' hose. Need to share air, no 'hugging' your buddy. Hand over the long hose reg and go to your backup. Between the built in weight of a backplate (7lbs), and the freedom of not having the that jacket...oh the diving got so much more enjoyable. Especially diving in the cold water and you have a dry suit, argon bottle, dive light, deco bottle, etc. all hanging on your harness...much better than hanging on that 'jacket'.
How did I miss you in Sint Maarten? Karen and I love you guys. ❤
Fully understand your “French anchoring” remark.We are sailing here in San Blas and getting so frustrated of all the French boats anchoring almost alongside. Not to mention that I have to see the first French boat properly setting it’s anchor. Due to this, we had many sleepless nights to keep an eye on our neighbors boat when the weather conditions were marginal….
You absolutely need to order a set of the Ansersen replacement knobs, the originals break very easily. Try the belt kit for the battery also.
You could use a butterfly knot as the slider knot just like an arborist. That way, removing the knot is super easy.
Was going to recommend gloves! Also enjoy the back inflation bcd. I’ve been using one for years and love mine!
Good fun at the end.
"Ask Jeff Williams" on UA-cam will instruct on how to set up the delicate detecting instrument. My Great Grandfather left Randers DK for U.S. around 1910 for Chicago and later to Baldwin county Alabama. Opelika is our home. Love your channel.
Yes, that dive flag next to the motor was not very visible. Glad you are going to look at relocating it. Maybe one on the front of the dingy and one in the water. 🙂
That'll be much easier on our new DIY dinghy :)
Hey Mads, you're better off simply cleating off the anchor snubber, rather than spliced eyes. Then you can drop it if you need to in an emergency ;)
That thing takes up a lot of space!
Next boat dream list … have the dive compressor draw air from the air conditioner. The cooler dryer air will increase the performance of the dive compressor. Or least I think so. I had a brownie brand compressor with a port in the cockpit.
That's an interesting idea :)
It might decrease the amount of condensation to remove from the compressor too!
I LOVE metal detecting! Great episode. 😎🥰😎🥰😎
If you want to try stopping the growth on your ropes and props hulls try coconut oil. ... Even in the water coconut husks don't accumulate growth. You can add it to cheap bottom paint and prop coatings.
Try it on your ropes.
Use dyneema soft shackles on your snubber vs. those stupid hooks. It's totally secure, and safe. You can deploy and retrieve the bridle on the deck because the soft shackles easily go over your rollers.
Love the metal detector! Good luck with it!
Mads will only be able to enjoy this time apart because... your coming back! 😂
Very true :D
wedding rings are a cool find. 👍👍
Good choice of detector !
@7:16 Awesome compressor setup and good on you thinking of your neighbors! Liked, subscribed, rang the bell!
Looking forward to seeing what you find with the metal detector.
Something tells me it's not going to be treasure right out of the gate ;)
I love the Metal detector. In the BVIs, off of the willy thornton you ought to find a lot of stuff.
This is a really interesting technique! For better surface finish try "ironing" in the slicer. It might require a few attempts to perfect but should be worth it.
There is PVA in printable filament form. I wonder if that may be useful somehow?
That EVO looks great!!
Love it so far! :)
To connect the bridle to the chain, check out using a icicle knot.
You could drag a couple of powerful small salvage magnets ( like some people drop down from bridges) behind each transom end of the dinghhy pontoons in good seabottom. Work in a grid pattern and tell the French neighbors to move because their keeping you from making money.
Oh Glorious Treasure!!!
I know where a shipwreck is on St. Croix. It’s called Long Reef. A few years ago I found several 1920’s silver spoons and forks and even a buffalo nickel, a ships bell and lots of small items, but I needed a metal detector to find more. You are just a few hours sail from there now. It’s only in 8 feet of water on the south side it’s called long reef next to Ruth Island. If you scout around there you will find ropes lying on the bottom which will lead you to the wreck. I’m assuming it was 1920’s and Danish. When you come out of molasses pier it’s just a 1/4 mile or so on your left. You could anchor in Fredriksted and dinghy around.
I lived in the BVI for several years doing boat work. North Sound is a wonderful spot.
It's absolutely awesome here. I wish there was a shorter walk up to Hog Heaven but other than that 10/10 :D
If you can get ahold of one of the first-generation M1 Mantus Chain Hooks they are much easier to hook and unhook while dangling over the bow pulpit. I've done it hundreds of times and it's pretty simple once you get the "trick" of lining up the crossing of the two crossing slots on the hook.
The new M2 claw hook is supposedly easier to pull through the anchor roller while installed so you could theoretically pull the thing up and work on it there and then undo the bridle ends and pull those up through the roller too. It seems to me that this would cause a bit of wear and tear on the lines since the chain and roller bits would be chafing on them as they all pulled around the roller together. The Mantus-made bridle we got with our package deal has chafe protection for a few feet near the hook end to account for this. Still, they might get a bit tangled around each other in the process. This all seems a bit janky to me and I am glad I own the original hook so it is easy to just slap it on and off leaning over the edge the bow. No worries.
The hook itself should last forever and the plastic gate is a lot more durable than the flimsy rubberband holder thingie on the "improved" M2 version. I love all things Mantus but I prefer the older hook here. Ours was bought in the winter of 2016/2017 at the Chicago boat show and has heen used hard over the years but original first plastic gate still has a little life left in it, but will soon need to be replaced as wear and tear on the plastic is evident.
A few years back when the new hook came out and it became apparent that the old one wasn't going to be made or supported any longer we bought literally 10 extra plastic gate thingies so that we could go on using our old hook forever. If we get a minimum of 5-6 years of use out of each one then 10 spares should last us the rest of our cruising lives.
Make sure you check local laws, a lot of places you can't metal detect, they don't want people taking valuables from their country, some places you can get jail time if you don't have a permit
Budapest ?? best city in the world !!!
try a 'dyneema' soft shackle through a chain link, run through an eye splice on the 8 strand... easy peasy snubber.
Super episode … thanks guys … 🎉😊
Love the new early retirement doohickey, Mads - spicey variety! just don’t strike it rich and retire the channel! As a veterinarian and proud owner of a poop gull mermaid, Ava, what was the animal you’d created that made a very brief appearance a couple weeks ago?
I subscribed for more metal detector content.
love the 'retirement fund' the best yacht channel . thanks for the work + knowledge put into the video.
Thank you so much :)
There's a lovely restaurant near you the North Sound Bistro, enjoyed their swordfish two years ago.
Hey mads, you mentioned calculating the distance of the bridle. What length of 8 strand did you end up needing?
I wonder if you could find another anchor down there.
Mr money maker is great. Have fun.
Thanks :D
Great video
Stay safe and we'll see you next week.
You too :) See you next week :D
Hello Mads, I'm trying to track down those cam latches you used to lock your companionway stairs in place...I can't find them no matter what I search, where did you get them?
LOL, great ending!
4:31 I’ve never scuba dived before, but I think it’s a good idea to make that flag a little higher so people can see you
Creo que sería una buena idea añadir 3 o 4 metros de cadena al principio del fondeo de la nueva ancla del pequeño bote hinchable
There is an anchoring term for that.. It's called Getting Frenched!
I prefer to take my snubber back to midship cleat, keeping the hook/knot out of the water, that gives me stretch and resilience, my snubber line is on the skinny, also gives me stretch, unfortunately my hook does not go to well over the roller, rope is best for that. Am still undecided about making the line that joins snubber and chain sacrificial.
Thank you for another great video 👍
Why is it that it is always 10mm sockets that go missing?...I just lost one down a drain last week 😆
In some parallel universe they're drowning in 10mm sockets and single socks 😂
The metal detector is pretty cool
Go closer to the shore and in the sand where folks would picnic etc. Jewelry, coins and watches kind of common there and the tuning you are going to do is good. Test with modern coins watches and then gold silver etc in no sand cover a few inches of sand and a foot or so. You can do that on the beach. Then in the water. Learning how to tune and discriminate between the materials your detector finds and it's reaction to them will help a ton. Good hunting!
Thanks for the tips! I'm sure it'll take a while to learn how to best use Mr Money Maker but it's a lot of fun :)
Great ending, you guys are hilarious. The disappointment on every 10 year old's face when they realize metal detectors don't deliver treasure.😊
You will want a few metres of SS chain between the anchor and rode before heading to the pacific.
For the bridle, just make a dyneema soft shackle.
Put double siided Velcro strip over the mantis rubber piece to reinforce it and you can pull it straight into rhe deck without damaging the the rubber strap.
Mads - you got a shout-out from #TeuluTribe on your water-maker recommendation !
I'm so glad they got a water maker :) That is going to be a huge quality of life improvement!
Middle of the road metal detector? That's an Excalibur II. They go for around 1800-2000 dollars. That's not middle of the road in my book. Good hunting. If your are going to hit good targets that is the detector to do it with.
Get youself down to the ABC islands for diving 👍
I've heard good things :) But we also heard good things about Tobago Cays and I was not super impressed.
@@SailLife we are on Bonaire atm and was here in October also, it is very good the corals are still in very good condition, as with most things there issues here (sctld look it up it's quicker) but follow the advice and have some great dives, also the free massive salt crystals from the salt mining facility is worth the trip 😂.
Navionics is great but you have to look at the dates of the posts to get an idea of if the point of interest is still happening
The best place to do metal detecting is the beach, think about people loosing rings even watches... I found diamond rings (wedding) on the beach... that was years ago....
OMG, I just realized we were anchoring in the same harbor two weeks ago...