This channel really is growing like crazy! Great job on not just this one, but all of your creations! I make cardboard models and those are hard enough, but this!? This is on another level of hard. Great job on everything!
Can't wait to see more 3D printed guns in action.... My wish list: Mosin-Nagant 1891 MP40 Sten SMG Arisaka Type 99 MAS 36 Owen SMG Type 100 SMG Steyr-Mannlicher 1895 FN FAL FN P90 DP-27 LMG Lee-Enfield No. 1 Mk. III/No. 4 Mk. I M16A1 Steyr AUG FAMAS F1 AWM/AWP Steyr Scout Galil AR Nagant 1895 Webley Mk. VII Walther PPK Browning Hi-Power CZ-75 PM (Pistolyet Makarova)
Hi, I purchased this model a few weeks ago and have been really enjoying printing it bit by bit, modifying some of parts to print them how I want, etc and really enjoying it. Thank you so much for these project builds! I just have one question, where can I get the list of springs I need to buy to properly assemble it?
Another amazing one, great work. Now, I will probably buy the K98k some time soon, but if you make a functional StG44, I will tell you to shut up and take my money.
Hey a few questions here, How do you make your models, like what program, and how do you know your print parts will fit, cause when i always try to make stuff, they never fit
The process is quite complex. Find free models, watch more pictures and videos, refer to the World of Guns, and then create models and animations. Finally, print the test and make modifications before printing🤔
@@zvc_3DPrint Thanks for the lightning speed reply, i will download it, but is there any way to know if your 3d printed parts will fit? cause when i print stuff like bolts or screw ons, they never seem to fit together, and i'm trying to make funtional stuff but can't
Приветствую! Это круто! Мое уважение, Вам! Столько труда, было вложено, я представить себе не могу! Просто колоссальный труд! Ещё бы сделали МР-38, у которого ствольная коробка, была фрезерованная. Я бы, купил эту модель и распечатал бы на своём 3D принтере! С уважением, Антон!
Can i use a real mag-drum in this model, im 99% sure i use the same resource as you and i have made an mg34 and a mg42 but scaling to 1:1 accuracy is very difficult from the way we do it and I print at 100% PLA+ to make all strong soi bought real guns to get accurate measurmentsbdo you do try and do the same to make functional parts Anyway 3d cult is having an issue atm will try again tomorrow fo Akm and PPS41 & M1 garand
@@zvc_3DPrint 3D cult works ok now so i bought the PPSH41 and Akm I will print of the propiate magwell and see how acurate it is to fit a real Drum Mag And i shall let you know how it turns out :) Just to say I 3D print wood parts with 30% wood filament , your be amazed how strong and good looking the stock parts look.. Amazing stuff at around the same price as PLA+ for which i usee all the time a standard PLA has warping issues and the Sun UV ruins the plastic after a while
@@zvc_3DPrint you find a way to open the world of gun files in cad? Do you then have to adjust dimensions to work properly? I'd be very interested in a video on how you do it.
am almost halfway printing this weapon . some frames in the video are to fast .you cant see what you are doing . especially around the trigger mecanism .
Спасибо огромное за разработку и сборку и за видео! Лайк! Пистолет-пулемет Шпагина - символ нашей Победы! Thank you so much for the development and assembly and for the video! Like! The Shpagin submachine gun is a symbol of our Victory!
![🔨20 хитрых приспособлений для настоящего мастера! [3D печать]](http://i.ytimg.com/vi/xZoYwbGjcoc/mqdefault.jpg)
![🔨20 хитрых приспособлений для настоящего мастера! [3D печать]](/img/tr.png)
Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
안녕하세요 당신의 영상을 즐겨보는 한국인 시청자입니다. 다름이 아니라 당신께 여쭈고 싶은게 있습니다. 개인적인 얘기고, 길어질것 같은데 혹시 이메일같은걸 알려주실수있나요?
실례라면 정말 죄송해요!
Build a pps 43
The PPSH-41 is my favorite gun of all time! Thank you!
😉🙏🏻
ZVC should be an official company.😊
😅that's not my field
Remarkable details as always, especially with the drum mag loading. Looking forward to see a blowback action on this.
will be made future
Waltz of the flowers, nice tune.
I love PPSH, Thanks
😉🙏🏻
Жизнь хороша - когда есть ППШ! 😄
Life is good - when there is PPSH! 😆
@@ИльяКузнецов-м7ъ Yes. Who needs wife, if you have PPSH?
@@couchpotato6424 Да!
This channel really is growing like crazy! Great job on not just this one, but all of your creations! I make cardboard models and those are hard enough, but this!? This is on another level of hard. Great job on everything!
Nice
All weapons shown in one video would make a amazing video
👍🏻🤔Good idea
Looks very good
amazing work as always
🙏🏻😉
Absolutely masterful work, you’re an artist!
I don’t know what resources you use for these amazing models; I’d love to see an HK P7M13.
These are Masterpieces!!!
You should make a full auto blow back and shell ejecting version i would buy it
Full auto requires a motor. I will consider making it in the future🤔
@@zvc_3DPrint ah
This us why i need a 3d printer
Seeing you connect the barrel to the stock made me think of an ar lol
Very nice work, as always! Have you any plans to do FG-42 or MG-42?
maybe future
Well done!🎉
😉
Awesome!
Why don't you make the father of all assault rifles, the STG 44?
No, only true Russian beauty
@@asherbenson9589 the STG meets the requirements 🤨
no hurry. There are still many models to be made 😀
nice 👍
Can't wait to see more 3D printed guns in action....
My wish list:
Mosin-Nagant 1891
MP40
Sten SMG
Arisaka Type 99
MAS 36
Owen SMG
Type 100 SMG
Steyr-Mannlicher 1895
FN FAL
FN P90
DP-27 LMG
Lee-Enfield No. 1 Mk. III/No. 4 Mk. I
M16A1
Steyr AUG
FAMAS F1
AWM/AWP
Steyr Scout
Galil AR
Nagant 1895
Webley Mk. VII
Walther PPK
Browning Hi-Power
CZ-75
PM (Pistolyet Makarova)
😅Making the model is very slow
I see.. well, looking forward to make it into a reality from you.. 😊😊
ah yes, classical music while building a weapon.
It doesn't actually work
@@tyomikshkolnik7988if you modified it, its gonna work just fine
Hi, I purchased this model a few weeks ago and have been really enjoying printing it bit by bit, modifying some of parts to print them how I want, etc and really enjoying it. Thank you so much for these project builds! I just have one question, where can I get the list of springs I need to buy to properly assemble it?
I marked the size of the spring in the video. small spring can be obtained from discarded small appliances. thank u for ur support😉
Hi I am wondering if the zvc 3d prints can expel 6mm bb's once thank you for your time
hi. a regular magazine would be nice too .
Do all of your pistol calibre weapons use the same rounds or are they different cartridges?
different
@@zvc_3DPrint nice!
Please make stg44
Great vid❤
Any plans for Howa Type 89, or Famas F1?
Oh yea, finally....
Another amazing one, great work. Now, I will probably buy the K98k some time soon, but if you make a functional StG44, I will tell you to shut up and take my money.
👍👍
do you have a link for the large 300mm spring you used? can't find one with the correct diameter on amazon.
Sorry, I can't find it now.🙏
man i wish you could sell them in stores
only sell stl file🙏
?
@@Mr-Vyn 34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
@@zvc_3DPrint sorry I’m from Canada but do you except $CAD
Can you do the Kriss vector or the CZ-Scorpion
Hey a few questions here, How do you make your models, like what program, and how do you know your print parts will fit, cause when i always try to make stuff, they never fit
The process is quite complex. Find free models, watch more pictures and videos, refer to the World of Guns, and then create models and animations. Finally, print the test and make modifications before printing🤔
@@zvc_3DPrint Thanks for the lightning speed reply, i will download it, but is there any way to know if your 3d printed parts will fit? cause when i print stuff like bolts or screw ons, they never seem to fit together, and i'm trying to make funtional stuff but can't
@@grandsnail700 Yes free model sizes are not fit.
@@zvc_3DPrint well thanks a lot for your quick responses, i'm definitely gonna buy one of your models in the future
@@grandsnail700 thank u for ur support😉
Maybe a blowback M82?
Will you make it with the stick mag?
will be made
Great. Looking forwards to the stick mag and possibly the blowback
Wonderful print
Nice...for motherlaaaand.....uraaaaaaaaaaaaaa،👍🇨🇳💪
Приветствую! Это круто! Мое уважение, Вам! Столько труда, было вложено, я представить себе не могу! Просто колоссальный труд! Ещё бы сделали МР-38, у которого ствольная коробка, была фрезерованная. Я бы, купил эту модель и распечатал бы на своём 3D принтере! С уважением, Антон!
🙏🏻thank u for ur support
Пройди по ссылке - у автора есть интернет-магазин. ППШ там как новинка стоит пока 18$ остальные образцы - по 15 $.
can u do a Gepárd GM6 Lynx?
Did... Did this just make it so I can print a 75 round drum magazine in Canada?
A blowback version would be awesome
will be made future 😉
how a bout BAR rifle?
Do u sell the programs/plans for these ?
yep bingdelengku.github.io/
Can i use a real mag-drum in this model, im 99% sure i use the same resource as you and i have made an mg34 and a mg42
but scaling to 1:1 accuracy is very difficult from the way we do it and I print at 100% PLA+ to make all strong
soi bought real guns to get accurate measurmentsbdo you do try and do the same to make functional parts
Anyway 3d cult is having an issue atm will try again tomorrow fo Akm and PPS41 & M1 garand
I don't think so. I don't have a real gun to test.😅
@@zvc_3DPrint 3D cult works ok now so i bought the PPSH41 and Akm
I will print of the propiate magwell and see how acurate it is to fit a real Drum Mag
And i shall let you know how it turns out :)
Just to say I 3D print wood parts with 30% wood filament , your be amazed how strong and good looking the stock parts look.. Amazing stuff at around the same price as PLA+ for which i usee all the time a standard PLA has warping issues and the Sun UV ruins the plastic after a while
@@zvc_3DPrint I bought the model to see how accurate it is and my original Drum mag fits pefecly
Im very impressed of how you got it 100% accurate.
Can you print only butstock
cool, it would be great if you found a way to make it fully automatic.
Fully automatic must use motor
@@zvc_3DPrint okay.
Would like to know which printer that you are using
amzn.to/2yVr9Q3
What about 3d printed FAMAS F1/G2??or a bolt action rifle?😺
maybe future
M4 remake when?
hello. Is it possible to make a Soviet PTRD-41 anti tank in 3D?
Do You have a 3D Project?
doesn't have this plan at the moment
So what's your next project after this?
G17 or ppsh blowback kit
blowback m16?
Do you also found this model on internet and sell it ?
yep Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
Boa noite amigão estou aqui do Brasil e gostaria muito de ver você fazendo a réplica da tec 9 se pode 👍
will be made future
Can this dude make a shop so I can buy these guns cause I don’t have a 3-D printer
Pay somone to print it for you
If only full auto blowback. That being said for 3D prints these are amazing work!
thank u for ur support.Fully automatic requires a motor. Might consider making it in the future.
@@zvc_3DPrintwhat about semi auto blowback?
Where do you find all the dimensions for the parts?
world of guns
@@zvc_3DPrint you find a way to open the world of gun files in cad? Do you then have to adjust dimensions to work properly? I'd be very interested in a video on how you do it.
@@Evans25291 Just refer to the relative position of the world of guns. The size also needs to refer to other images in Google.
@@zvc_3DPrint thats alot of work wow
@@ovizcarra8667 Yep, so it takes a long time to make a model.
It would be better if there were a magazine instead of a drum
The magazine has also been made.
@@zvc_3DPrint Really? Is it in the file? I didn't find the magazine in the file
You should make a blowback version for this
will be made future
Pls give us a 3d print of mosin nagant pls
will be made future
i would like to see aks74u
am almost halfway printing this weapon . some frames in the video are to fast .you cant see what you are doing .
especially around the trigger mecanism .
In the process of your assembly, if you encounter any problems, you can send me an email.😉
Hi can you do awp pls
will be made future
FG42 please
Make pls a tt 33
will be made future😉
In the Next Video Can You 3D Printer The Rifle The French Used In The First World War?
Lebel 1886
dude.. I wish lol
Hk417 is good
신기하다
i have one in the closet
👍👍
Go to school with that
No! Not a good idea nor a smart move, even in that unique color scheme
👋🏻
@@robertdragoff6909 no I just had an idea How he’s Gonna answer here
@@robertdragoff6909 and it worked perfectly
Спасибо огромное за разработку и сборку и за видео! Лайк! Пистолет-пулемет Шпагина - символ нашей Победы!
Thank you so much for the development and assembly and for the video! Like! The Shpagin submachine gun is a symbol of our Victory!
🙏
Да ты что, клево
And now... gatling gun?
Thank you comrade, now we can fight off these nazis.
🤡
@@dieterdodel835 🤡
Почему ниодна из ваших моделей не стреляет😢
don't understand what you mean 🙁
Yes more russian firearms.
Soviet
Imprime um pistola de atirar elastico
На завод в Ленинград тебе нужно!