3D print toys MP5 ( Creality & CR-6 MAX )
Вставка
- Опубліковано 5 лют 2025
- If you like my video please help me like and share Click to subscribe and small bell. thank you. : )
A lot of people ask me where to buy the spring. Amazon sells it. Then there are some self-made ones.
I write down the web address below.
There are some tools I use.
3D printer
CR-6 MAX
Official Website :www.creality.com/
CR-6 MAX: bit.ly/3iIUqSG
How to by Creality supplies: vip.creality.c...
Ender 3
amzn.to/2yVr9Q3
akm screw
amzn.to/2Bahaag
spring kit
amzn.to/2Wv75xa
spring wire
amzn.to/2Lt59yE
drill 1mm-13mm
amzn.to/2WxAsyR
file
amzn.to/36ZKCuL
Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
Yes, finally. MP5s are hard to find for props.
the print quality of this MP5 look much better than your other weapon ! is that your new printer !?
Creality CR-6 MAX
No , it was propably washed in Perwoll
But really.. That is interesting recommendation I got from the AI
@@KamikazeMedias tanks for the comment ! It's good to read you ! ON UA-cam
@@eliotbouvier3710 thanks not tank
@@KamikazeMedias At least its pretty cool
Oh man, these are so awesome. I know you get a lot of requests but I'd love to see a g36, whatever you make next is guaranteed to be gold anyway. You're doing an awesome job.
I would love to see that too. There is one on cults3d though
Me and my cousin's wanted to swat raid my brother as a prank coa we were young and we were board. And my cousin had 4 swat outfits from our Halloween and it fit us all well. My cousin printed 3 of the gun that was made in this video. We all watch the video and made it. Then we went to hiding and when he got in the house we waited around 2 min and he almost broke the door 😂 and just threw my brother on the floor. What i did not know was that my cousin made 3D printed handcuffs and cuffed my brother. We all laughed and that was the greatest days of out lifes.
😉sounds like good memories
Thanks. It was! But we are thinking of doing it again >:)
This is making me want to buy a 3d printer more every day
do it, JUST DO IT :)
Fr
@@simonecastello991 I wish I could lel
@@thefunfactman6098 here you can buy an ender 3 for under 200€ off of Amazon if you're lucky enough
Save up and buy one, then learn how to maintain it, model your own parts etc. Ender 3 was easily some of the best money I've spent!
Amazing, could we see an FAL or an G3 in the future friend ? thx
may be 😉
@@zvc_3DPrint I second the motion on the G3
@@DoubleNickelFilmsLtd third
@Kakashi Hatake its literally just an extended mp5 with larger caliber and slower rate of fire lmao
Fal would be nice
Ha. It's be so funny if you put that full auto trigger pack on a SP5. But that'd be craaaazy.
Finally, its been a while and its worth the wait.
Awesome job! Thanks for the print orientation reference, I always mess that up
Good channel all Good stuff and Hardwork ❤️👍
Awesome again! I can’t wait to get my first printer and make a few of your work. You should have a look at the Welrod pistol! Cool bolt action silenced WW2 handgun. Made famous in the Sniper Elite games as well.
I've been waiting for this
Sick build, maybe a ump 45 next? Would be pretty cool
Amazing model!
i started to print this mp5 . design looks very solid .
model file?
Really cool my only suggestion is to print spent rounds not the full ones so it looks more realistic
That looks great! I would really like to see the A3 collapsible stock on that thing.
love the mp5
Sir, that thing is a beauty! Great work!
They overengineer everything about their guns and I love it.
A Winchester Model 1897 "trench gun" would be so cool!! I love these so much. I wanna print them, but sourcing springs is hard 😅
These videos make me want to buy a 3d printer
Thats awesome, keep up the good work!!! I find your videos inspirational and relaxing.
🙏
Congratulations your now an HK engineer
“How do you make guns?”
*”The secret ingredient is springs.”*
use 3dmax. I have been making models for 15 years😉
@@zvc_3DPrint Thanks, I was trying to find a good way to print this kind of stuff!
this looks amazing for amateur film makers, maybe not a realistic firearm, but it would help them make almost any weapon prop they need
Can you do a kriss vector or p90 next it would look awesome
YES p90
he did the slap, I’m happy enough
😜
Yay this is really cool and well thought out! Would be really nice if you did a L1A1 FAL!
The L1A1 and the FAL are 2 different weapons. The L1A1 SLR is a semi auto only British production version of the FAL
@@perfectlynormalhuman5473 the main differences would be dimensions for the L1A1 in imperial and the lack of an auto sear right?
@@hawaiianrobot Yeah, the L1A1 cant use metric FAL stuff and vice versa.
You should make a pump action shotgun like the remington 870/mossberg-500(they are very similiar on the inside and outside)
try looking through the person’s older video’s
@@CAPTAiNC ive been watching this guy for a long time and i havent seen any pump actions but ok ill check
this looks sick! you should also make an mp5ssd conversion as an alternative piece, with a rail and Aimpoint or something, that would be so awesome!
I would love to have a full list of all the springs and/or the model used to make them
Nice MP5!
Greets from Germany
Thats some of the coolest shit I've ever seen! Bro, you're a genius 😁😂😂. Good work my brother!! God bless stay cool!!
🙏😉
Gotta Have That HK Slap
I have a few suggestions.
First one being a conversion of this gun. An mp5sd with a folding stock.
Second one is a shotgun. Could be a pump action or a lever action.
If you could make those that'd be cool, but if you dont want to, that's your choice.
Anyway, nice print work my man.
I have an idea where you use cap gun caps as a primer to fire bb bullets srtaight from the shell making it super realistic
Ah yes, the famous HK slap 😊
i wish there was no music and just you putting the stuff together
make the 3d prints of the m60, ppsh-41 or mg42 guns, great 3d print job, i'm written on your channel and i'm brazilian i like your videos
M60 & m2 browning
@Kakashi Hatake why? Mg3 is the same but better
Spring List:
#1 300mm Long 10mm Dia .75mm Wire
#2 24mm Long 6mm Dia .4mm Wire
#3 14mm Long 5.5mm Dia .4mm Wire
#4 8mm Long 1.6mm Dia .3mm Wire
#5 8mm Long 1.6mm Dia .3mm Wire
#6 10mm Long 2.6mm Dia .3mm Wire
#7 10mm Long 6mm Dia .5 Wire
#8 100mm Long 8mm Dia .6mm Wire
#9 6mm Long 2.5mm Dia .3mm Wire
#10 6mm Long 2.5mm Dia .3mm Wire
#11 3mm Long 2mm Dia .3mm Wire
(2) Custom bend springs in trigger assembly, wire Dia unknown
(1) Custom in Bolt Assembly
Spring Magazine looks real. They cost about $7 on HK Parts site
👍👍👍
jee eerste en een fantastiesche video
Love it the mp5 series of subguns is definitely one of my favorites and you should do the mp5sd and the mp5k versions as well as the cans that B&T made for them.
maybe future
Man has the talent
this is outstanding
makes me want a 3d printer even more
maybe you could make a xm8 sometime in the future?
Nice 👍🏻👍🏻
At this point this guy should have a wall full of 3d guns, crazy
What about print Mosin nagant? There is not as many parts and springs as in this gun.
What do you charge for the development of the model of the browning 50 cal?
Best thing ever
Thank you!
APC9 Pro would be awesome. Also where you get the design from?
good job bro! do you lubricate gun parts???
Woo ！so real🤩
Please could you do a pump action shell ejecting shotgun?? Would definitely buy that.
I would like to see a redo of the K98K video with with a much smoother print
I'd love to see some videos of you designing the parts in CAD.
It's not so interesting, if all sizes are known - just mechanical work.
Awsome 👍😎👍
Could you maybe do a x26 Taser next? Thanks!
Nice! But a minigun… plz? :)
hey buddy how about a suppressor for that
Good job :)
Desert eagle .50AE soon?
Anyway we could buy the parts pre-printed with springs? Friend wants to get into building but it’s expensive with actual parts and if you mess up just slightly it could cause issues. But this is the literal perfect safe alternative, maybe make that into a business idea? Safe intro into beginner level building.
😅 sorry because of the need to constantly make new models. So no time
@@zvc_3DPrint well if possible by any means, I do not have nor do I have the ability to obtain a 3D printer. Anyway that I could purchase the Glock model you made already printed? It would be an outstanding business opportunity for safe learning!
Would love it if you could do a USP 45!
Уууу сюка! Хорошо!)
Eso dispara los balones de encerio? Sino funciona por lo menos quiero saber si vale la pena
I love these videos
does anyone know a good place to get the springs used here? i have the kit from amazon but it really doesnt cover much and i dont have the tools to make my own springs.
beautiful
I like this gun 😮😮😮🐪🐤🐤🐤🐣🐣🐣🐥🐥🐥
cool!
thx
really nice work!
Keep up the good work! I love how well your post processing turns out!
I'd love to see you make the Cheytac M200 aka the intervention.
2000 not 200
@@doggomcpoggo1264 you're wrong. It's called the m200 intervention on Cheytac's website.
@@ShekelThief well then sorry that a mistake on my side
@@doggomcpoggo1264 no worries. Have a nice day.
Can you put the link to the long spring? And another question what did you use for the tiny metal parts
The metal parts are all looking for the parts that can be found and modifying them by themselves. Springs can be found in discarded small electrical appliances.
Damn, how long did it take to print all parts? And how much cm³ material you used? Im interested in buying this model, just want to know how much it would cost to print it. And do you sell the springs for MP5?
Absolutely amazing job once again. You are probably one of the only 3d modelers that makes truly amazing fully functional gun toys. If I could make a suggestion, any chance you could do a custom kit for your beretta to make it into the Auto 9 from Robocop (or possibly a beretta 93r) or the 9mm Sword Cutlass from Black Lagoon? It would make a great convention piece and would love to print two of the sword cutlass for my GFs cosplay.
I find your videos very satisfying and calming. where do you find all the files for these "toys" you print. Or are you scanning and making your own?
Hey man your videos are really cool and I was wondering if you could make something lever action
ninja ripper + World of Guns, some clean up on blender et viola
The SVD Dragunov, please ?!!!
Yeah, that would be very nice
Veeeeery try makeing a mp5 blowback ❤
maybe future🙏🏻
please do an FAL this is so good
HK trigger Groups are kraut Space magic to me
Cool
So do you make that huge spring or buy as is?
The spring was purchased. The diy spring has too little elasticity
So, is there any type of specific glue I need when putting together the base, or can I just use any super glue?
I use water based glue
@@zvc_3DPrint Alright, thanks!
It would be awesome if you could find a way to have air pressure powered shells so it could be full auto.
Will consider later. At this stage, it is still mainly assembled
I am gonna metal cast this with steel so the guns is more durable obviously if you try to shoot actual rounds it will a blow up or not work
11 out of 10
How much money does this build cost? , like materials, screws and all that
1kg pla and some springs
I love you soooooooooooo much
🙏thx
Are you going to make a sd version of it too?
Amazing work! arent you thinking about SD version of MP5?
I assume he’s working on an SD/K version like he did with the Thompson drum mag and vertical foregrip and will just release them separately
Can you make a blowback version of the MP5
maybe future
Make some more AK's please. :(
Do a Mk18 or a 416 witt dome cool spec ops atachments
will be made in the future
Hey buddy its a great thing to make & as a COD player I love MP5 or QQ9. Can You tell me whats the FPS of it
@@Gorilla7738 its a Call Of duty mobile name of mp5
Классно!👍А из чего Вы делаете пружины?
Вроде как он покупает готовые. А вообще, у автора есть видео про изготовление пружин
@@lexdas5531 Спасибо, поищу.✌️