INTERNATIONAL MAXXFORCE 13 HIGH PRESSURE FUEL PUMP INSTALLATION PART 2

INTERNATIONAL MAXXFORCE 13 HIGH PRESSURE FUEL PUMP INSTALLATION HOW TO REMOVE BAD HIGH PRESSURE FUEL PUMP AND REPLACE WITH NEW HIGH PRESSURE FUEL PUMP

[@michaelchoi9205]

Your video was very informative, and educational. Thank you.

[@dthetruckguy1499]

👍🏻 Great ingenuity on getting the pump separated.

[@tamerxdieselproductsllc2690]

Great information. Really good

[@abolfazl8pool554]

Great information thank you

[@kylekellett7231]

Great video

[@abolfazl8pool554]

Great job 👏

[@thomasmulvaney]

So the numbers on the gear don't mean anything? This pump does not have to be timed to engine?

[@truckscoffee5188]

Correct on a maxxforce 13 no timing is needed

[@stephenhenry7300]

Why didn’t you replace the pump heads instead? Tamerx has those too

[@truckscoffee5188]

Yes they do but since I was going to have to take the old one off anyway to replace just the hydraulic fuel pump I decided just to replace it with a complete brand new fuel pump and new fuel lines.

[@Shananigins09]

It is possible to replace the hydrolic head without removing the pump but it’s so much easier with it removed. Also to note from experience there’s little cup that sets inside a groove on the bottom of the hydrolic head, make sure if you remove or it comes out with the head since magnitised that it goes back exactly in the groove, I had missed the groove not knowing but it set all the way down due to the notches on the side, after I drove it 70 miles working great then let it idle I realized i messed something up hearing horrible grinding sound comming from the pump. After that I had to replace the entire pump as it had tore it up.

[@michaelchoi9205]

Why or what caused the hairline crack in the pump head?

[@sstevocamaro]

@@michaelchoi9205They’re just made from cast metal. Very brittle. They should be made from billet honestly..

[@MichaelJohnson-je2vo]

How did you make it bubble?

[@truckscoffee5188]

I added a little fuel and pump it by hand to find the leak

[@angelozararis8096]

210 lbs on that jam nut. No air gun

[@user-lc6sr5tk5l]

If I have a bad high pressure fuel pump will that allow me to loose power?

[@truckscoffee5188]

Yes .

[@truckscoffee5188]

Any codes or check engine light on ? Also bad turbo or turbo leak broken can cause loss of power check your clamps on your inter cooler tube and turbo.

[@lusakombuba336]

Taiming

[@truckscoffee5188]

No timing needed

[@midnight873]

How many hours did it took you to remove and install?

[@truckscoffee5188]

Took around 4 hours. taking my time to make sure everything was correct.

[@midnight873]

​@@truckscoffee5188 thanks i was wondering cus mechanic wants to charge me 10 hours

[@sstevocamaro]

⁠@@midnight873It’s probably his first time doing it, so it can take long time.. Once you know what you’re doing you can get it done rather quickly..