Mandiii Fights Again, 120lb Battlbot - RoboGames 2018
Вставка
- Опубліковано 1 жов 2024
- We took Mandiii back to RoboGames with an upgraded drive. Watch to see her fight.
Subscribe to ThisDustIn: bit.ly/2qd20WH
Watch more ThisDustIn: • We Made a Chainsaw Trike - Наука та технологія
Bummed we didn't make it to robogames this year. Congrats on second place! Mandii looked great on the stream!
Matthew Vasquez matt I’ve watched your fights and I’m reading a book on robot combat, but I’ve been discouraged from building one because of the lack of diversity in the robots. It seems like everyone is trying to copy minotaur or something. How can I make my robot unique?
We underestimated you. And what appears to be a lack of a feeder wedge.
I didn't know I wanted to see something so bad until now
Mandi seems like a contender for Battle Bots ... can't be flipped and withstands damage 👍🏿
Needs to be double the weight that it is now to compete
Wait, Railgun (from China) and Deep Six? They were in BattleBots 2019!
Cheesecannon25 And General is the same team as Black Dragon!
Aw man, those were some good fights. You almost got gold too!
Mandy needs better drums and more practice she will be badass after that 🤗
I'm building a medium weight bot that im gonna enter into competitions like this, and I hope to battle you sometime :)
I think I'm gonna try to build a robot to fight at the next Robogames. What weight class is Mandiii in?
#TK-Dragon75! 120lb I advise building either a 1lber or a 3lber if you are new to Robot Combat, it is safer, and cheaper, as such is easier to back out should you decide it isn't for you.
Did you build it?
what music do you use in the intro? been lookinmg for it for al ong time, ive asked in people's videos who have that music but either no response or they don't tell me (#._.) I'd appreciate it
what type of motor does mandiii use for the drum
We run either a Scorpion Outrunner Helicopter Motor or Castle Creations 2028
ThisDustIn thanks for quick reply
What type batteries did you use in mandiii
ah man great fights. Hopefully I can convince my school to let me bring uppercut next year to see you guys again.
Holy crap that was your robot?!
Centorea 88 ya I drove uppercut, she was pretty badass haha.
Ruanhead you are one lucky man/woman
Centorea 88 got to thank my school for it all.
Ruanhead congrats on the top 16 last year
RIP Middleweights.
Why didn’t you go with a one piece drum instead of a two piece
gravity center would have been offset
@@haltair4015 Would be the same whether 2 or 1 piece were used, as long as the drum profile's correct e.g. Touros' drums. An offset-balanced drum from identical segments would need at least 3 pieces(the middle one being twice as wide as the others).
maybe having 2 pieces makes it easier to stay balanced in case half of the tooth sheared off?
DHL UPS etc eliminate a lot of issues at the airports nowdays. Often cheaper than overweight luggage. Often handled much better.
it was nice
AYY robogames are back!
That first bot was Robotto, they are from Mexico, they took out two lights this year, and won the rumble... Not a bad bot.
I've just seen the video about the 250cc Barbie kart.. Just waiting until that 500cc one ahah
Yea that general is a mean build, good fights, mandiii took a hell of a beating.
how come you guys where allowed to enter 2 robots? i thought they where implementing 1 robot rule?
OMFG gala different weight classes. And we had two 3 pound bots but they were trying to fill up spots anyway
yeah light and middle, but i thought the rule was 1 robot regardless of ether light middle or heavy? i though thats why the catclysm/warhawk guy dident compete with cat Kong as well, and why only touro maximus turned up ?
The rule was you could register 1 robot and waitlist another. So we ended up getting off the waitlist for the other robot once we got there.
@@thisdustin2435 ah so like a reserve/ if they where low on numbers? thanks for the info was curious. is there any improvements planned for manddiii
Yeah pretty much, it's a list of people who get to join the competition if other people who are registered don't show up. I am not in charge of mandiiii any more but yes, were mostly focusing on a bigger drum and moving the center of gravity farther back for better drive control.
What's your major? I'm fifteen and thinking about starting in the ant or beetle weight class
Is there a way to stop speed controllers burning up or batteries from catching fire? I thought these components would have monitoring systems to shut down for awhile until cooler?
Get parts that are properly rated
Hey will mandi fight again in 2021
Hi Trent.. I am also Trent
8:54 don’t you remember tombstone vs witch doctor
Elevation, angle and position of the cameras in the arena will be much more better if adopted from soccer's.
In general, this is a great video, specially with no ads that ussually sucks data by force.
WOAH ITS MINOTAUR! YOU GUYS ARE SO CREATIVE!
guys which motor you use for wepon?
banana for scale? ah, i see you are a man of culture as well
I hope you can pass robogames to be on battle Bots
Mandii lembra Touromaximus 4x4
Man this is nuts!!! #thiccbrowgang
This isnt on tv like robotwars, is there a "official" channel with fights on youtube? Liked the storytelling of the vid
There's a nice live-stream of the event on twitch, www.twitch.tv/robogames
Ah nice! tnx. cheering for ya :)
I now measure everything in bananas
What school are you guys and girls from
Kwon Won georgia tech
yes
Question, after you graduate are you gonna build a bot of your own?
Will probably do some 3lbers and eventually work my way back up to 120lb after saving up and building up my own shop.
M O R E C O N T E N T ! ? ! ? !
I love seeing what you guys do. (Hopefully) future student here. How can I become a member of the robojackets?
You need to understand how to do a Robot, and prove it´s existence ;)
My serious opinion is, Get a nice Power Supply, like a very nice Battery, then Motors, Like Stepper Motors, a Motor Speed Controller a Transmitter and Receiver for RC Cars. I guess it´s a Start.
Would be nice (opcional), to understand about PWM, which stands For "Pulse Width Modulation".
And then just... Do your best... I´m just trying to help, if you like electronics go check it out !
If you want to join robojackets, you just gotta get into GT and then come to the meetings. No prior knowledge needed. You can usually find a booth at Faset.
Hey, was wondering if I could ask something about Mandiis drum.
Sure!
@@thisdustin2435 how much of Mandii's weight is used for the weapon system?
The drum is around 30lbs, so 1/4 the total weight.
Noice mate
where was this event located?
lander holsinger Alameda County Fairgrounds in Pleasanton, California
What is the name of that awesome ring spinner? Right at 0:04 for like 1/2 a second
the gold ring spinner is nigel from what i saw it dident work to well
@@omfggala3913 Thank you!:
@Aaron rosner no worry's
MANDiii is bae
I am shocked you used aluminum for a frame... especially upfront.. some good ol hardened steel would have done much better. the good bots are using tips on the spinners that basically could be used to machine aluminum.