Your video just saved me 1400$ in repairs at the shop. Thank you, I'm subscribed and watch through full ads on your videos. Hopefully UA-cam algorithm pushes your channel!
Thanks for identifying the 3. Also, a common problem is non mechanics AND mechanics connect the wrong wire to other sensor since both plugs swap out, plug in to both sensors. Lastly, mice love to eat the wires on these vehicles!!!
Thanks for the video. I was stuck trying to figure out how to replace these sensors on my van.. turns out the parts listed on rockauto were not compatible with my vehicle. After finding your video I realized the parts you showed are exactly what I needed. Now just need to get the right sensors and go on with getting them replaced!
Thank you so much for making this video I searched everywhere trying to find a video that matched my 08 Chrysler town and country and yours was the only one I could fine I was trying to replace my output speed sensor and none of the other videos it looks like my my vehicles engine or transmissionYours match mine perfectly so I appreciate the video keep making them and helping us backyard mechanics save money by fixing our own automotive problems
Thanks,help me out a lot because I couldn’t find that dam sensor. It took me days of searching for a video that really shows where it at.. thanks man..
Yes you are a good teacher and I will follow you because you are good and you also go thru it step by step and show it and name the right parts so I just want to say thank you and keep it up and by the way I'm sorry about your hand ok
When it takes a piece of you in trade... 1:06. Nice work getting that last connector off without breaking it, i am usually not that lucky : ] great days to you and your family !
Good video, friend, a question...My Dodge Journey does not have codes, I put it in gear and it does not move forward or backward if I mark the changes on the dashboard, what could it be?
Thank you so much.....you are the only one that has shown the location of the vss....I couldnt find it anywhere until now...Thank you so much....If I could suggest. If you havent already....in the tags put in 2010 town and country VSS location, 4.0 liter V6 . Thanks again.
I have a 2008 Chrysler Pacifica touring all wheel drive 4.0 motor. Trying to replace the transmission pressure sensor. Blowing code help .... can't find where it goes 😩 I would love to go back to horse and buggy.
Farm Dad, I have a 2015 Chrysler Town and Country. I watched your video and was successful in changing my flex plate, thank you for the video. I also changed the trans oil and filter since it had 128,000 on it but now it goes into gear but won't move, what am I doing wrong?
I’m assuming you changed these because your transmission would randomly go into limp mode won’t shift out of 2nd and let you go faster than 35 MPH?? Currently have that issue with mine. Turn the van off it will shift no problem for awhile.
That sounds awesome to have that much open land. Congratulations, I have the very same minivan and I am having trouble with a P076 a code that has put it the transmission into limp mode, if you have any insight on that, please reply lol.
Thank you for the video! I have a VW Routan 2011 SE that got error code P084B . VW Routan is basically Chrysler. I wonder if replace these sensors may solve the P084B problem?
Afraid replacing these sensors will not help with that code. You have a transmission pressure issue and that sensor is internal, I believe. Perhaps on the valve body, but don't hold me to that.
After removing and replacing the sensors did your car get running normal no whining noise lack of power and smooth riding again? I’ve watched your diy video and plan to replace mine to see if it’s the problem with my Chrysler 200…
This one was throwing transmission sensor codes, but changing the sensors did not fix it. The transmission ended up needing rebuilt. Hope you have a better outcome!
It's possible, but there are other more likely causes like a faulty shift solenoid, Low transmission fluid level low, Dirty or contaminated transmission fluid, Poor electrical connection for shift solenoid, or Valve body assembly faulty.
This may be the part number, but don't hold me to it, 5078930AA. Maybe try searching based on 62te instead of Chrysler 200, if that number isn't correct.
Hello sir sorry for bothering you again I do have 2010 Chrysler town and country 3.3 because I have shafting problem I replace booth sensors at the transmission but the one you replace does not look like the one I replace? Thank you
@@TheGeno2001h this was a 4.0l with the 6 speed 62TE transmission. I believe the 3.3l came with a 4 speed transmission, so it may have different sensor locations.
Will replacing these sensors help get my trans temp dashboard display back up and running? Currently blank with error P1745, but I’ve already changed my fluid & filter, along with 2nd fluid cycling after using transmission seafoam cleaner
So what was your transmission doing Didn't explain anything was it having shifting issues did it go into limp modeHow did it work after you were done please get back with me
This video was filmed prior to the video where I had the transmission rebuilt. The trans was throwing a sensor code so I went ahead and replaced them before deciding to have the trans rebuilt. I just didn't get around to editing this footage until after editing the replacement video.
@@FarmDad thank you for your response. I am replacing the transmission currently and have it out and am having a horrible time getting the reman into place. I was hoping to see how you installed the reman.
@@Parlitore I remember I had to angle the jack some to clear everything. I got it up on the dowels and then pushed it together. Sorry this isn't in the video, but you'll get it. Just takes some jimmying.
@@zuberalisyed9786 it's hard to remember now, but I want to say $1500 with me performing the removal and installation and just taking it in to the transmission shop.
Hey Thank you so much it was the transmission sensor i replaced and it did the trick no more limping mode. I will replace the others as well...Thanks farm Dad
Your video just saved me 1400$ in repairs at the shop. Thank you, I'm subscribed and watch through full ads on your videos. Hopefully UA-cam algorithm pushes your channel!
Thanks buddy. Glad I saved you some money!
Thanks for identifying the 3. Also, a common problem is non mechanics AND mechanics connect the wrong wire to other sensor since both plugs swap out, plug in to both sensors. Lastly, mice love to eat the wires on these vehicles!!!
All good points 👍
Thanks for the video. I was stuck trying to figure out how to replace these sensors on my van.. turns out the parts listed on rockauto were not compatible with my vehicle. After finding your video I realized the parts you showed are exactly what I needed. Now just need to get the right sensors and go on with getting them replaced!
I can't tell you how many times I end up having the wrong parts for a job. So frustrating. Best to you
Thank you , kept seeing these on a diagram but couldnt find them in person. Greatly appreciate the video. They are hidden pretty well.
I know what you mean. Glad this helped.
Thank you so much for making this video I searched everywhere trying to find a video that matched my 08 Chrysler town and country and yours was the only one I could fine I was trying to replace my output speed sensor and none of the other videos it looks like my my vehicles engine or transmissionYours match mine perfectly so I appreciate the video keep making them and helping us backyard mechanics save money by fixing our own automotive problems
Glad this was helpful, keep wrenching!
Thanks so much for the video. This is exactly how you replace these censors for a dodge grand caravan
Most welcome
Thanks,help me out a lot because I couldn’t find that dam sensor. It took me days of searching for a video that really shows where it at.. thanks man..
Glad to hear this helped.
my Chrysler automatic transmission fault p1790 p0868 p0733 p0734 what is the problem, do you have an idea please
Yes you are a good teacher and I will follow you because you are good and you also go thru it step by step and show it and name the right parts so I just want to say thank you and keep it up and by the way I'm sorry about your hand ok
Appreciate you!
When it takes a piece of you in trade... 1:06. Nice work getting that last connector off without breaking it, i am usually not that lucky : ] great days to you and your family !
Is that transfer sensor the same as the intermediate shaft speed sensor ?
Good video, friend, a question...My Dodge Journey does not have codes, I put it in gear and it does not move forward or backward if I mark the changes on the dashboard, what could it be?
Thank you so much for this. I was able to replace all three of my sensors with no problems and no male assistance!!!!
Great job, I'm glad this helped!
Thank you so much.....you are the only one that has shown the location of the vss....I couldnt find it anywhere until now...Thank you so much....If I could suggest. If you havent already....in the tags put in 2010 town and country VSS location, 4.0 liter V6 . Thanks again.
Thank you, good suggestion! I'll do that!
Congrats on 1k subs. This was very clear and easy to follow.
Is that what helps the transmission change to high gear?
Sort of, at least partially. They are responsible for shift points etc.
I bought a Chrysler once. Yea I’d do it again if they give me a second transmission for free right away.😝 thanks for the video Farm dad. ❤️cabin
Nice demonstration ! Awesome.
Do you have the part number for the input sensor? Finding several different ones on Google wanna make sure I get right one
5078554AA
Thanks a lot , recovery me van .
When you buy new sensor how you know which one is input and output I replaced mine and now the reverse shakes what I do wrong? Thanks
why did you replaced the sensors? any problems in transmission shifting?
I was getting a sensor code. But I ended up needing a transmission rebuild.
Hello! I wonder if it is necessary to calibrate the sensors after installing them
Not necessary.
I have a 2008 Chrysler Pacifica touring all wheel drive 4.0 motor. Trying to replace the transmission pressure sensor. Blowing code help .... can't find where it goes 😩 I would love to go back to horse and buggy.
Send her this channel that she is using to help with what she needs to repair
Farm Dad, I have a 2015 Chrysler Town and Country. I watched your video and was successful in changing my flex plate, thank you for the video. I also changed the trans oil and filter since it had 128,000 on it but now it goes into gear but won't move, what am I doing wrong?
Did you fix it ?
Oil leve
That's bloody awesome great information thanks for sharing cheers
It’s that for transmission fluid pressure sensor po871 ?
No these are speed sensors. The fluid pressure sensor is different.
I’m assuming you changed these because your transmission would randomly go into limp mode won’t shift out of 2nd and let you go faster than 35 MPH?? Currently have that issue with mine. Turn the van off it will shift no problem for awhile.
It was throwing a sensor code. Shifted fine but would randomly go into limp mode. Ended up needing a transmission rebuild.
Excellent how to my friend thanks for sharing.
Thank you!
Welcome!!
Thx bud this helped so much
Glad to help.
That sounds awesome to have that much open land. Congratulations, I have the very same minivan and I am having trouble with a P076 a code that has put it the transmission into limp mode, if you have any insight on that, please reply lol.
That sounds like mine although I had a couple other codes too. Ended up ultimately having to have the whole transmission rebuilt. 😞
Thank you for the video! I have a VW Routan 2011 SE that got error code P084B . VW Routan is basically Chrysler. I wonder if replace these sensors may solve the P084B problem?
Afraid replacing these sensors will not help with that code. You have a transmission pressure issue and that sensor is internal, I believe. Perhaps on the valve body, but don't hold me to that.
@@FarmDad Thank you! I recently got transmission oil changed. Is it possible they put more or less oil than standard?
@@yiyujia9042 yes, it is.
@@FarmDad thank you!
2000 Dodge Grand Caravan Sport...3.3L...po 700, po 740....was
Shifting good...now no go in drive,reverse...trans fluid good...your opinion?....
you nee tom change the solenoid pack in the valve body
Got it...
After removing and replacing the sensors did your car get running normal no whining noise lack of power and smooth riding again? I’ve watched your diy video and plan to replace mine to see if it’s the problem with my Chrysler 200…
This one was throwing transmission sensor codes, but changing the sensors did not fix it. The transmission ended up needing rebuilt. Hope you have a better outcome!
What were your codes
Great tutorial!
Is it procedure for a 2010 Dodge Challenger?
No
Thank you for your time
How many "ohms" should each sensors have?
I do not know. Sorry.
You may want to update the Amazon link so you can be compensated:)
Can the o ring on those sensors go bad and cause a leak
I personally have not encountered that, but it's not hard to pull it out and replace the o ring if you suspect it.
Hello I have the P0733 code. Could it be these speed sensors fail?
I don't think so, these are speed sensors.
By the way Which wheel is that. Is that the Driver side right?
Front, drivers side.
Podrían transmitir en español? O subtitular en español
Hi, will replacing these sensors fix the p0765 shift solenoid D code?
It's possible, but there are other more likely causes like a faulty shift solenoid,
Low transmission fluid level low,
Dirty or contaminated transmission fluid,
Poor electrical connection for shift solenoid, or
Valve body assembly faulty.
Hope someone can help with the wiring colors for the 3 sensors?
Im getting code p0734 in my 07 Chrysler u think it will b those sensors
Unfortunately, sounds more like transmission problems.
But it works fine it's just check engine light on that comes on
Great tutorial
Did that fix your problem ?
No, ended up needing a transmission rebuild. Did this to rule them out since it was throwing sensor codes.
Trying to find the name of the transfer speed sensor for my Chrysler 200 3.6 any other names it could be under?
This may be the part number, but don't hold me to it, 5078930AA. Maybe try searching based on 62te instead of Chrysler 200, if that number isn't correct.
How do you the bolt out of the transfer sensor I can't fit the socket in
Can you fit a box end wrench? I don't recall having any issues accessing these bolts.
Is this the same for the routan?
Yes
Farm Dad thankyou so much!
do i need to change all 3 sensors if 1 goes out? (shaft sensor).
No, sir.
ty for your help
Glad to do it!
Sweet video
Se me quebró el censor cigüeñal cómo lo quito es una voyaguer 96
Hello this is for what car and for po716
Chrysler 200, Pacifica, Sebring, Town & Country; Dodge Avenger, Grand Caravan, Journey; Ram C/V, Promaster; and Volkswagen Routan.
@@FarmDad thank you sir
Hello sir sorry for bothering you again I do have 2010 Chrysler town and country 3.3 because I have shafting problem I replace booth sensors at the transmission but the one you replace does not look like the one I replace? Thank you
@@TheGeno2001h this was a 4.0l with the 6 speed 62TE transmission. I believe the 3.3l came with a 4 speed transmission, so it may have different sensor locations.
@@FarmDad yes sir thank you again for your time
What's the point of the sensor s??
P0871 any help guys
Will replacing these sensors help get my trans temp dashboard display back up and running? Currently blank with error P1745, but I’ve already changed my fluid & filter, along with 2nd fluid cycling after using transmission seafoam cleaner
I don't think so.
So what was your transmission doing
Didn't explain anything was it having shifting issues did it go into limp modeHow did it work after you were done please get back with me
This transmission was throwing sensor codes and occasionally going into limp mode. It ended up needing a full rebuild.
Didn't the new transmission come with new sensors?
This video was filmed prior to the video where I had the transmission rebuilt. The trans was throwing a sensor code so I went ahead and replaced them before deciding to have the trans rebuilt. I just didn't get around to editing this footage until after editing the replacement video.
@@FarmDad thank you for your response. I am replacing the transmission currently and have it out and am having a horrible time getting the reman into place. I was hoping to see how you installed the reman.
@@Parlitore I remember I had to angle the jack some to clear everything. I got it up on the dowels and then pushed it together. Sorry this isn't in the video, but you'll get it. Just takes some jimmying.
@@FarmDad I was able to get it in, it is exhausting.
@@Parlitore glad to hear it!
Hi what code trigger you to replace this I get DC Error Codes P083B P0841 P0306 please help
It was a speed sensor code. This transmission ended up needing a rebuild.
@@FarmDad do you know approx cost of rebuild please
@@zuberalisyed9786 it's hard to remember now, but I want to say $1500 with me performing the removal and installation and just taking it in to the transmission shop.
@@FarmDad Thank you very much appreciate your answer. hope all is cool with you and your farm :)
Hey Thank you so much it was the transmission sensor i replaced and it did the trick no more limping mode. I will replace the others as well...Thanks farm Dad
you bid a lot?
hello and thanks for the tutorial I give you a 100
Hi, thank you!