Thx I was trying to figure that out and I thought of your idea but didn't know for sure that was going to work but guess it dos thank you very much for this information
got any videos of putting the starter back on if you pull the part with the magnets in it off. Mine went out and i pulled just that off to check it and the wires had broke off in there so i purchased a replacement. was just worried after seeing the springs and two metal cubes.
I have replaced my the starter (which I am not sure is the problem in the end) but the issue is that the chain keeps popping of the starter. Is there an adjustment or something that tightens the chain? Or something else that would be causing this?
@@unprofessionaljoe7233 I can’t get the little blocks to stay in because of the springs, long enough to insert the thing. Would you happen to have some advice or a tool that would help or maybe know of a how to video online I could watch??????
If you happen to see this what's the best way to get those 2 springs back in and all together inside the starter? I spent a solid 20 mins trying to do it and just got frustrated. Any tips would be greatly appreciated. Your videos help alot by the way!
UnProfessionalJoe can you please tell me how to loosen the bolts to get the crankcase off to get to the chain that wraps around the starter id appreciate that
@@rebelkeeton3532 yeah it's kind of a pain in the butt not going to lie it took me quite some time to do it too. Just keep at it and eventually you will win
Thank you sir I just ordered mine on Amazon I'm going to try to change it tomorrow
Thank you good sir!!
Ill be trying this tomorrow! Thanks!
Thx I was trying to figure that out and I thought of your idea but didn't know for sure that was going to work but guess it dos thank you very much for this information
got any videos of putting the starter back on if you pull the part with the magnets in it off. Mine went out and i pulled just that off to check it and the wires had broke off in there so i purchased a replacement. was just worried after seeing the springs and two metal cubes.
same rn
@@jaylul3450 just buy a new one man lol they're pretty cheap and not a head ache like that was.
Can u send me a link for the starter in this video?
Does the reduction box use oil or grease?
OK so I bought a new motor and did thisWhat I don't get is were dose the wire connect too?? The one thats bolted on hanging off the starter
okay if your talking the wire with the small gold screw that connects to a metal tab coming directly from the starter it connects to your cylinoid.
I have replaced my the starter (which I am not sure is the problem in the end) but the issue is that the chain keeps popping of the starter. Is there an adjustment or something that tightens the chain? Or something else that would be causing this?
no tensioner. maybe your gear or chain is warn down
I took the part with springs in it apart. (I didn’t know any better) now I can’t get it back together, any advice??
Patience . They suck to get in and it takes awhile but it is doable
@@unprofessionaljoe7233 I can’t get the little blocks to stay in because of the springs, long enough to insert the thing. Would you happen to have some advice or a tool that would help or maybe know of a how to video online I could watch??????
If you happen to see this what's the best way to get those 2 springs back in and all together inside the starter? I spent a solid 20 mins trying to do it and just got frustrated. Any tips would be greatly appreciated. Your videos help alot by the way!
It's just a judge plain in the ass. It takes me quite a bit of time to do aswell
UnProfessionalJoe can you please tell me how to loosen the bolts to get the crankcase off to get to the chain that wraps around the starter id appreciate that
@@unprofessionaljoe7233 is there a trick to it? How do u do it? Tips and tricks please! Thanks in advance!
@@rebelkeeton3532 yeah it's kind of a pain in the butt not going to lie it took me quite some time to do it too. Just keep at it and eventually you will win
Where do the little springs go?
Where do the little springs go?
They go behind the brushes it’s a brushed motor the springs keep tension on the two brushes
how do i get the clip back on im soo confused
there's a little screw that holds er on
nm i see what hes saying