Humble Mechanic - LIQUI MOLY - Valve Train Noise
Вставка
- Опубліковано 18 сер 2020
- In this video, we go over engine noise, engine wear, and why our hydraulic lifter additive is great for your engine, stabilizes your oil, and reduces the undesirable noises many engines make as they increase in mileage.
- Авто та транспорт
This product works like magic. My lifters were very noisy and went silent immediately. I could not believe my ears.
Which one did you use
Update, this does not help with lifter noise at all
@@mistacdawg6882 which one did you use?
Did you add it to a fully topped up oil tank or was the oil low before adding the lifter cleaner?
@@mistacdawg6882 worked perfectly for me lmao
I've had significant improvements on my 2002 Toyota Rav4, It's a day and night comparison.
Fantastic pitch! A real Classic! STP's Andy Granatelli is smiling on all of you from above! Now if Liqui Moly could only enter a new Turbine Car team in Formula One, the image would be complete! (Andretti... don't even think about it.)
So, you need to put LM hydraulic lifter additive in fresh oil?
It can be mixed with ceratec?
I flushed my engine with engineflush LM, and started knocking, I think it is a stuck lifter... that is not good
I tried the Forte at the last oil change and it had no effect. This time I tried Wynns, and the tick vanished within 30 seconds. This is on a 88k Volvo V50 1.6D, I was thinking that I would either have to have new lifters or sell the car, but I now have a lovely quiet, smooth engine again. I am assuming that the oilways have now been desludged, so I will just try clean oil at the next change and see if it comes back.
I added the mos2 to my engine. Can I add this as well or should I do a oil change again?
hey please a quick question buy very important for me :)
i changed my oil and my oil filter yesterday but i did not put the hydraulic lifter additive.....if i want to put it do i have to change the oil again ? i just changed it yesterday i did flush the engine before changing the oil.... :)
thank you :)
Can i add liqui moly lifter additive to molygen 5w20 ?
hi. what is the sulfate ash percentage in it? and how safe is it for a dpf filter in a diesel exhaust?
Hi, is LIQUI MOLY CeraTec safe to be used on cars with wetbelts?
I have mercedes e350 2011 with a taping noise from engine, should we use this on mercedes?
Hello I am from South Africa I send my mother to alot of spareshops and no one sells this product I want to know where i can buy this product because my bmw E36 318i lifters are noisey
is good for mechanic valve train?
Hi, I'm driving a 2.0 MPI car with 60k km on the clock. The engine is developing loud tapping noise during cold start gradually decreases as I drive the car (but it's still there).
I'm planning to get LM Molygen 5W 30 + LM hydraulic lifter additive, does this combination works? It's understood that no additional additive is needed for Molygen, but does the combination above (with lighter oil - 5w30) helps the engine tapping noise?
The engine is on 5w40 oil all the time (Shell Helix Ultra).
Maybe try 0W-40, if it's the cold start (you probably have really cold winters over there). Make sure your car can take 30 oil (fairly recent or oil-water heat exchanger and/or stupidly cold weather), if you try an xW-30.
my chevy aveo was tapping lifters like hell..i poured the product now its smooth problem gone
Hi there.. Can this be use into bike.. I own bmwf800gs.. Wonder would it can be use or would harm the wet clutch.. Trying to prolong the VC service...
Hello jijo,
thank you for your inquiry.
At first your engine does not have hydraulic lifters, thats why it would it actually makes no sense using this product and it is not meant to be used in vehicles with wet clutches.
If you want to do something good to your engines oil cycle use our Motorbike Engine Flush.
pim.liqui-moly.de/pidoc/P000023/1657-MotorbikeEngineFlush-35.0-en.pdf
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Can I use the ceratec with the lifter additive? And what is the order when pouring them into the engine
Hello jc,
thank you for your inquiry.
Yes you can use Cera Tec with Hydraulic Lifter Additive.
The order does not matter as it gets mixed in the oil very quickly.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Hallo liqui moly!!!
I am using this product in all of my cars and it's perfect!!
Especially in my diesel 3 cylinder polo!
I have a question:can I used it in my (very loud) diesel generator(with sae 20w 40 heavy duty)?with or without oil additive?
Your answer would be very helpful!
Hello Nikos,
first of all: Thank you very much for your using our products and for your positive feedback. We really appreciate this and are very pleased that you are happy with our products! 😊🙏
Regarding your question:
Yes, you can use it in your diesel generator.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
@@liquimolywebtv
Thanks for your reply and professionalism!!
Truth must be said!👍
Dear Nikos,
thank you very much for your positive and kind feedback.😊🙏
We are glad that we could help you.
Our most important goal is to ensure our customers' satisfaction by delivering high-quality and reliable service and products.
Best regards and all the best,
your LIQUI MOLY team
www.liqui-moly.com
hei..LiquiMoly, i used this Hydraulic Lifter Additive and my 1998 Lexus Rx300 started vibrating and then it produced big white smoke. what could be the course?? what to do next?
Hello Modisenyane,
thank you for your inquiry.
Unfortunately we are not able to diagnose your engine from distance.
We recommend to see a workshop to get a diagnose about the issue of your engine.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Do I need to change engine oil after using the Valve train noise product for a few hundred miles or add it to new oil after changing oil and keep it in there?
If your talking about the hydraulic lifter additive it can be added in and kept at any time
@@andrewsine7129👍
Hi. Do i have to use hydraulic lifter additive with LM engine oil?
Hello Ty,
thank you for your inquiry.
Our Hydraulic Lifter Additive can be used with all conventional engine oils.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
can the hydraulic lifter additive and MoS2 be used together, added the MoS2 when i did my oil change and wanted to add some hydraulic lifter additive now, would this cause any problems? i dont think it would just wanted to be sure.
Same question here.. I added ceratec now i'm wondering if i can add haydraulic liftters or not
@@faridh2125 I have the same question
You can they already answered this question, but don't use Ceratec and Mos2 at the same time
Hello Liqui molly , can i use this additive for mechanical tappets ? Or the effects is only for hydraulic tappets ? Thanks
Liqui Molly is JUNK
I have a 1989 Mercedes 3.0 litre gas engine. Lately it's making noise in the top end, like a bumping rattling noise. Can I use one of your products in it without harming the engine. It is a aluminum head straight six.
Hello 172,
thank you for your inquiry.
Yes, it can be used flawlessly.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Can I use hydrulic lifter with 5w20 new generation of liqui moly or it is already added into oil?
Hello Eyad,
thank you for your inquiry.
No, this additive is not premixed in the Molygen New Generation 5W-20 oils. But of course it can be added.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Sponcers must pay you very well.
Hi LM, can I use Hydraulc lifter additive for my dephaser pilot on a Renault 1.6i , put a new dephaser in and the start up noise is still there?
Hello Jack,
thank you for your inquiry.
You can definitely try if the Hydraulic Lifter Additive is helping in that case, too.
But if the dephaser is really the problem it should be solved by put in a new dephaser.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
@@liquimolywebtv thanks I put a nee dephaser in and it’s still making the start up noise , no now will try a new dephaser solenoid
👍🍀😉
Can i usehydraulic addictive on my general motors 6.0. V8 lq9 motor
Hello G-man,
thank you for your inquiry.
Yes, our Hydraulic Lifter Additive can be used with your vehicle.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Hi can this be used with standard 5w 20 Royal Purple oil?
Hello Aaron,
thank you for your inquiry.
Yes, it can be used.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
I have a Mercedes 1988 , I changed the oil yesterday but the engine sounds lil noisy ( hydraulic lifters ) , should I add this product and flush the engine oil or just keep it till next engine oil?
Thanks
Use and Lucas oil aditive
Should you substitute 1 bottle of liqui moli for a quart of oil or can I add it to a full oil without draining a quart ?
It all has to fit within the range on your oil stick - between min and max, including whatever you add to the oil.
Wouldn't bother draining, just account for it in the next oil change.
@@dushk0 Exactly what I did, thank you.
Hi. Do you have to use the hydraulic lifter additive each time you do an oil change or does it fix it?
Each time
I am very interested in this product. Since i have a gen 3 dodge 2008 5.7 hemi with the lifter tick. Im curious if this product would work with 5w30 synthetic oil.
It worked on my 5.7 Hemi after about 3 or 4 days😊
Hey I have a lifter tick as well 5.7 hemi..how many bottles did you use of lifter additive, was there any immediate difference, @@anderander5662
Hello Liqui Moly, can I used Ceratec + Hydraulic Lifter additives at the same time?
I’m wondering the same thing
Yes you can, but don't use the Ceratec and the Mos2 at the same time
Anyone else think this would work well for cleaning vvt camshaft actuator /solenoid
I recently had P0017 and P0014 and lumpy idle, changed the oil and drove it hot a few times after being qouted 3k to replace them luckily it worked and its running perfectly again now, ....... No ticking, engine completely silent but thinking this would clean the vvt actuators 🤔🤔
Hi liqui moly ,can i use the lifters aditive with the oil change for the rattling sound of lifters only or i have to to first do the engine flushing procedure then I've to add the lifter additives and i want to know the procedure for this please reply
@liqui moly
@@mr-king9981 not liqui moly but I use the lifter additive every oil change without flushing and it works amazingly well
I have a mercedes e350 2008. Its an 8 liter oil capacity. How many cans do i use.
2 cans!
Hi there,
What
What's the difference between Hydraulic Lifter Additive and the Cera Tec? Moreover, are they suitable for 1.6cc Daewoo Nubira 2002 engines 160,000 miles?
Hello Tamer,
thank you for your inquiry.
The Hydraulic Lifter Additive is specially made for issues with the lifters, whereas Cera Tec is an oil additive to reduce friction and wear.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
My car has loud lifter clatter only on cold startup. The owners manual states that either 5w30 or 10w30 oil can be used. With winter around the corner, I’m not sure what viscosity oil to use in combination with your lifter quieting additive. Any suggestions? Thank you!
5w30 for winter
@@melvingibson4525how bout the recommended for ur car should I still use the ones u saying?
I swear this after the engine flush fixed a lifter tick in my VR6
Can i use on srt8 jeep 2007 6.1 hemi engine
Hello aury85,
seperately you could use every product that is shown in the video in your car.
If you need any further information please have a look at our contact/store finder. There you will find official LIQUI MOLY contacts/shops in your country/area.
www.liqui-moly.com/en/contact/resources.html
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
I own a 07 (1.3 Petrol) Lancer whose engine recently completed 300K. Engine idles a bit rough, gets overheated if driven straight for 3-4 hours and if you open the oil cap while the engine is running, it blows with SOME force.
Out of all the additives range you have, which one should I use and in which order?
Thanks
P.S. I have recently bought "Motor Oil Savor" and planning to use it on next oil change (I am using Liqui Moly 5W-40).
Hello Zeeshan,
thank you for your inquiry.
In your case we recommend to go to a workshop/garage to check the causes of your mentioned issues first. This sounds like mechanical issues.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
@@liquimolywebtv Thank you for your quick response.
I have a 1991 Lancer GTI 16V with noisy lifters, hope this quiets it down. 140hp is not bad at all for a first car! Love these old mitsus, they are built though as nails. My moms 1988 2.6L Petrol montero has almost 400.000km
3 years later first time seeing December 20 2023
It would be a much more meaningful and convincing video and advertisement if you provided sound of noisy lifters before and after adding the addictive.
Can i use this on a japanese engine?
Hello Alfonso,
thank you for your inquiry.
Please check the related product information:
pim.liqui-moly.de/pidoc/P000004/1009-HydraulicLifterAdditive-31.0-en.pdf
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
liqui moly catalytic cleaner caused my engine to knock then destroyed my o2 sensor.. still dont know what else is wrong with it
Can i use hydraulic lifter additive on my solid shim engine??
Hello Adam,
thank you for your inquiry.
Yes, it works with all 4 stroke-engines which have no wet clutch.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
it hasn't reduced the noise after around 60km of driving.. used it in polo '98 6n1
Hello Elfas,
thank you for your post.
If the noise does not get reduced, please see a workshop to get a proper diagnose. Maybe there is another reason regarding the noise.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
@@liquimolywebtv it got a bit reduced, but still you can hear that noise. Car is too old to put real money into it, maybe using liquimoly flush would help? or it would be wasted effort?
Hello Elfas,
from distance we are not able to determine if it would be worth using an Engine Flush but by our experience it could help.
Kind regards,
your LIQUI MOLY team
www.liqui-moly.com
Nerden bulabilirim yardımcı olurmusunuz?
Merhaba Ahmet,
sorgunuz için çok teşekkürler.
Türkiye'deki resmi LIQUI MOLY ortaklarımızı burada bulabilirsiniz:
www.liqui-molyturkiye.com/
Saygılarımla,
LIQUI MOLY ekibiniz
www.liqui-moly.com
It looks like a very thick oil, something like 50w50 😂
not work, for real!
it doesn't work at all ... the noise is worse and a lifter that used to make noise only when cold now always makes a loud clang
It was time for a rebuild anyway