Elite Force MP5k Upgrade Tutorial + Jefftron V3 Install
Вставка
- Опубліковано 4 січ 2025
- Welcome to Wyshtech Airsoft! In this video, we dive into the world of airsoft upgrades as we transform the Elite Force MP5k into a powerhouse. Follow along for a comprehensive guide on installing the Jefftron V3 optical mosfet, with crucial tips on selector switch calibration. Discover the carefully selected parts that turn this MP5k into a true monster on the field. Upgrade your airsoft experience with our step-by-step tutorial and expert insights!
🛒🛒🛒 Purchase Parts and Accessories 🛒🛒🛒
🛍️ Explore these upgrades on our website: bit.ly/Wyshtech
🔥🔥🔥 GET your AEG tuned by Wyshtech Airsoft! 🔥🔥🔥
💥 SHOOT us a message on our website contact form! 💥
🔗 LINK HERE ---- bit.ly/Wyshtec...
🔊🔊🔊 Connect and Engage 🔊🔊🔊
🔔 Subscribe for more airsoft modding adventures: • Airsoft MP5 Disassembl...
👍 Like this video and share it with fellow airsoft enthusiasts!
🎮 Join our Discord community to share builds, ask questions, and connect with fellow enthusiasts: bit.ly/Wyshtec...
📷 Follow us on Instagram for exclusive build content: bit.ly/Wyshtec...
📘 Join our Facebook community for updates: bit.ly/Wyshtec...
📺 Join our Twitch channel for AIRSOFT TECH Q&A LIVE STREAMS: bit.ly/Wyshtec...
I love the in depth builds like this I learn a lot from them!
Insightful as always! 'preciate these kinds of uploads 🤙🏽
Thanks bud!
Nice job on the wiring, ocd makes us do things as nicely as possible, even if we can't see it you still know it's there 😂
Man, sometimes it takes awhile and ALOT of patience to get it nice.
@wyshtechairsoft so true brother and you seem to have bucket loads of the stuff aswell as the right touch and a dialed in ear ,keep up the good work mate 👍 . Ahh how's the mini gun coming along
@drewmurray6480 Footage is almost done. Then its off to the editor. Its been a huge learning experience.
@wyshtechairsoft my jvan gears arrived bloody work's of art they are and my other adjustable infinity brushless motors came got 2 x 48.5k and 1 x 39k, pairing the 39k with the jvan 16's doing a rebuild for one of my honey badgers
How much did this build cost?
About $580 with labor and shipping included.
How does the elite force MP5K compare to the cyma version? I notice the cyma version is rear wired which gives more battery space above the gearbox.
This mp5k uses a Version 3 gearbox as to a v2 like in the cymas. The cyma im my opinion is a much easier and better platform to work with for a number a reasons. However it is still better than a TM based mp5k.
Is there any specific reasons for cutting off 3 teeth from release side of the sector gear? I have heard that cutting teeth of release side can cause the timing issues...
If you dont know what you're doing. Yes, it COULD cause timing issues. In this case, no as all on release side was required these specific gears due to the tappet pin extremely advanced. The piston would not finish its stroke by the time the tappet begins to pull back.
@@wyshtechairsoft Thanks. does it mean tappet plate PME??
I have this gun, could I simply put a slightly stronger spring to get more power with stock internals. Looking to get as close to 400fps with .20s. If so what spring? Thanks
Its mainly because the barrel is SO short that the bb doesnt have enough distance to accelerate. A barrel of at least 275mm in length will actually increase your fps. So you will need a suppressor to hide it. Otherwise you'll need to put a MUCH stronger spring (which will be harder on the internals) and make the compression better.
Though at that point it would be better to get a full sized MP5 which is ALOT easier to upgrade. Though the MP5K is ment to be a CQB gun and doesnt need to be even over 300fps as they can get MORE than enough range and accuracy in close quarters. They are not ment to be long range. Thats what rifles are for. ;)
Thank you for the info, do you have any barrel recommendations
The charging handle on mine is broken..can it be replaced?and where can get the part
You should be able to find the part on Evike.com.
How to get that fps with short inner barrel bro?
Spring spacers and Stronger than what you'd usually put in to get X fps. To put it simple. Barrels less than 300mm typically start to lose fps due to the amount TIME the bb is in the barrel. Shorter they are, the more fps you lose due to this concept. To compensate you usually have to put a stronger spring in. Another thing that plays a roll into this is the weight of the bb as well. Going heavier will help as in this situation (especially if you use a full cylinder) as it WILL joule creep due to overvoluming. Correctly voluming for the intended bb weight will help too. Also, .20g bbs are horrible metric to use if all a guy is looking to get is more range and accuracy.
Serious question!! How much for you too build this for me? I just bought a mp5k 3 days ago
Honestly, the CYMA SM9-K is a much better platform to build off of and uses a v2 gearbox instead of a V3. They shoot almost this fast in the video right out of the box. Not only that but more internals are upgradable vs any other brand that makes the mp5k. Let me know what your thoughts are.
@wyshtechairsoft honestly man I'm open to whatever you think would be best!
@sstoltz1007 email sent. Looking forward to helping you reach your goals!