Відео

Thanks. We prefer to extract power now from 12V or 24V on their respective start batteries with 1 or 2 Scotty AI's. than do a pureplay 48V.

They have 750A at 24V as well

I cant recall. But budget 25K

The 12V is an equivalent. Its at 48V actually. In summer it will charge the Lithium shown between 20-90% with no problem. In winter, it wll need Scotty AI from the vehicle alternator to do that. Cheers.

Go here... in stock... safiery.com/product-category/smart-induction-cooktops/

Hi yes it is fine on the side. Its about 8K.

Yes the physical cables ad stainless steel sheet may be solid 1960's.The Scotty AI is 2023 technology (AI is new you know) and the STAR-Light is 2024 technology.. The Victron Inverter is 2018 technology.

Thank you 🤗

Off inverter. Inductions need AC power

Thanks. We are now finishing STARship range with Wireless Opensource Bus. Here we have been struggling to get MPU down to 3uA of current. Its a big contrast to the expertise we developped with multiple 80A MOSFETS to uA technology. But we have done it!

Hey, thanks

2000w for single model and 1500w and 1800w on the Dual induction

Thanks

@@Safiery not the power output, the size. Problem is smaller coils warps skillets due to heating a small surface area only.

@@cobra800hp thanks, but I am after the coil size, not power output.

@@paulvictor9368 they are big but I don’t know the exact size but as big as the ring marks on top of induction

We don’t need that here in Australia but is an easy option for cold countries

Our after market Yanmar alternators are 8 pole, the factory ones 6 pole. So we built a pulse converter fully potted and it nicely gets the RPM back to accuracy. I dont think these were fitted here before this sea trial.

Price is on this page and yes moved from one vehicle to another. safiery.com/portable-tradesmen-power-pack-lithium-dc-dc-3000w/

Thanks Russ. Hope lots of UK made CIG Solar is being installed...

Yes Read the manual. Its more than twic the size of our unit and 35% less power. Plus on the current 40/50A model, when solar is on over around 50W, the Dc DC cuts out and only lets solar run.

Hi No the GX Tank 140 is a a separate module, albeit very small.

Yes you can use independently. The metal case is grounded as are the earth pins to the case. So any fault is still tripped by the RCBO.

Thanks

The Inverter is 240V AC but could be 120V AC

Hi Alan, I just re-looked them up. The Redarc 40A is 600W limit. Plus with more than about 50W of solar the DC DC portion derates. Th Enerdrive 40A is same 600W. The Victron is 700W plus Solar 100/20 will charge up to 300W at 15.8V for sodium Cheers

safiery.com/product/regulation-compliant-inside-van-2000w-inverter-300ah-sodium-batteries-50a-dc-dc/

Its not possible to get that. It has to run on AC. cheers

That's not a factual statement. There are several 48 volt models out there, as well as integrated battery (ese) models.

@@seanbrady9978 Great send me a link please Id love to get one.

Hi Yes, the industry standard is pulsing at low power. Originally, the pot, if it has enough iron or copper will smooth this out. The problem is the new pots that are induction "compliant" are thin with non-aluminium metal and expose the pulsing.

Yes Sodium will go lower but we set tham at the victron limit and get 90% of the published capacity within the victron range.

Great

Whoops... Thanks

@@Safiery ...have you, though? =)

the dual hob is optimised for a 2000w inverter

Yes agree, ive fixed that in my next video.

@@bonezed so in theory I can only cook at 1000W on eat at a time even on a 3000W inverter?

I think they stuffed up, clearly a chev

Apologies, yes its GM. We had 3 RAMs in this week and I had RAM on the brain. They take the pack out of truck and put in boat and connect to outboard alternator plus solar.

Great unit, approx price if possible, thinking this would suit my new transit which is coming shortly.

The Touch Encoder is very nice but their software is lacking. The software to drive it is all ours. The keypad is our own different to Grayhill. Small touch but we have changed LED's to Blue to match our Blue/Black theme and changes the LED status.

Yes that would work

Thanks

We are using a 240V Matter compliant Australian approved GPO plug in device. It’s compatible with STAR-power so the App in the video can chop and change between the two. Our new app is underway now and it will do the same but you can have linked automation that turns on the induction, exhaust fan and lights in kitchen on one switch. Then if you have a night mode , it will switch off the 240v devices and dim the kitchen light….

An added comment is the 240v switching in Czone is thousands on dollars. Ours is $60 an outlet.

@@Safiery fantastic, that makes sense now. Thanks for the prompt reply! Any updates on the STAR-power release date?

If your not sleeping or have a kitchen then thats fine.

Hi Allan. We do use kWh on our quotes and product descriptions. Its only in the UA-cam video i refer to 12V equiv because we have 3 years of messages challenging the Ah at 50V. We professionally dont use Ah. We use Watt Hours because the different voltages charging and discharging makes a difference.

Yes

I dont have that at hand but budget around AU$20K for this upgrade

@@Safiery I am asking about the total rig... not just the upgrade... apparently its about $200,000 for the full vehicle.

Price on line but around $600. It will not fade like the enerdrive and is more efficient. However, it is suitable for high end batteries with a lower float voltage (Victron, Safiery). So what battery are you running and what capacity?

@@Safiery big wei battery 200 amp lithium

Is my battery ( big wei ) 200 amp lithium not compatible. ? With the 12 v dcdc 80 amp charger ​@Safiery

Hi Harry. Instructions on product page. You will need to follow that before it will function. Go to our website and tap the chatbot for service.

No it doesn’t as it is transformer less

Agree for vehicle and single axle caravans but not tandem.

A pleasure

No problem

Yes the Iron donut gives a higher ride through current with surging loads but it’s much heavier and the 20kg lighter weight of the RS is preferred plus the solar is also AC coupled so with 2kWp of solar you have 8kVA during the day… a nice boost if running aircon off solar

are those mosfets going to last enough for it to worth it... ? i dont think capacitors are going to stay intact in both anyway but i hope for some feedback after the cost..> i went for old one as first and maybe try the new as second in future.. no care about paralel !! split still does the job in such big KVa

The world of Mosfets has changed dramatically and I don’t see any challenge in a 10 year life!

Yes we have 3 x Stedi 20W work lights. In the recent RAM2500, the total load of lighting was 16Amps. Thats a typical max. STAR-light can handle 20A split between 10A on positive and 10A on negatively witched LED's.

The Victron batteries are not on CAN. We are a Victron distributor and their 12V work well for 12V jobs but I dont recommend for 48V as you cant see the cells and there is a single BMS and a single point of failure. Recommended batteries have a CAN BMS in each battery.