Відео

@@toto14101 they are called dirty dingo engine mounts.

No problem thanks for watching

Search dirty dingo slider mounts for your year model. I got mine from az pro performance but many places offer them.

@@SIMPLE.C10 and the golden color ones? Thanks for the reply!!

@@leebrown2790 thanks a lot!

3/8npt

It’s the velaworks rear diy slam kit from my website.

Ok thanks sir. Those blocks look a lot bigger in pic then they do on truck!!

@@DallasRCracing you have to cut them down to whatever size you need. If you have tinworks arms you cut them down to 3 inches instead of 4

@@SIMPLE.C10thank you

sorry for all the questions but which hobart welder are you using?

Yea. Any sound that comes through your phone will work through Bluetooth.

@@ronaldlevingston31 it depends on how low You want to go. With a mini notch you’re not going to get the truck close to the ground. I’ve mini notched a few and regretted it. I wished I had laid it out.

I am wanting to laid it all the way out. And I see some tucks when they are laid out the front tires on some trucks the top of the be leaning in. What will stop that from happening?

@@ronaldlevingston31 most bagged vehicles will have some front wheel camber when fully aired out. You can fix that with an aftermarket drop member but those are expensive. Mine have slight camber but doesn’t look bad.

@SIMPLE.C10 ok thanks. When I start on my truck this winter. I will be order from your site.

@@ronaldlevingston31 thank you

@@chuys53chevytruck60 awesome

@@franksgarage8551 noted! Thank you!

@@dannysteveson6718 now that I do a lot of rivnut stuff I would. Back in the day I didn’t use that much.

@@SIMPLE.C10 well either way still came out great

Awesome

I’ve never bought doors but AMD is a good choice but depends on who you ask.

@@SIMPLE.C10 Thanks, they don’t make them for the 60-63.

Yessss

@SIMPLE.C10 cool I'm in Ohio! Waiting by the side of the road till you pull up!🤩

Hahahahaha yep!

I’m guessing you’re new around here. That’s ok. Welcome.

Thankfully I can lift it up to any height I want! So cool.

@@tobymoore5751 thank you for the support

@@user-sh6ol6st3k It’s called air ride suspension. I can raise it up with a push of a button. If you’re interested in learning how it works check out my page. Thanks!

@@DallasRCracing watts link I have available on my website www.simplec10.co also have multiple videos on it.

@@dannysteveson6718 thanks

Thsnks a lot. I don’t have a large space so have to keep it organized to utilize the space best. I work better with a clean environment. It gets rough during install sometimes.

Thanks

Thanks for watching

Only website www.simplec10.co

Velaworks has a torsion delete kit that allows you to bag the front and they have a universal notch for the back.

@@SIMPLE.C10 Thank you, haven't looked at them.

@@abelmaldonado6643 awesome! Keep grindin!

@@briangoudreau5793 Thanks for watching. I do have a very nice wireless DJI mic but it died after the intro because it was off the charger. I feel like all my videos have been very clear besides a few minutes of this one. Are you having trouble hearing any of my other latest videos?

@@SIMPLE.C10 like you said a few in the past but this one was tough I was watching it in the shop music was fine but hearing you was tough. I didn’t realize you had mics if I’m in the shop most of the time it’s just background noise

@briangoudreau5793 this video was a struggle because of the cicadas. If you watch the videos on tv or a phone they have been very clear and high quality. I invested a lot into mics to make sure people could hear me. On my end everything sounds great but I’m thankful for the feedback. The later half of the video had very loud cicadas and my mic was dead so probably that’s the issue.

Thanks

I believe so

@@leebrown2790 they are available on my website. www.simplec10.co

@@leebrown2790 thanks!

@@yeahbuddygarage No worries! You were chatting it up every time I saw you and didn’t want to interrupt. Glad you made it!

@@c10sinthecity I had a good time thanks!

@@C_Rodarte you can use my kit on the website and torsion delete with notch. I am get everything you need. Email me thesimplec10@gmail.com

@@joshsbluecollarbuildsdesig7427 did you bore the back or running spacers ? I have same issue with spacers. I put longer shocks on the truck and it helped. The shocks were limiting the travel.

@@SIMPLE.C10 i’m running an air ride. It’s a Porter built frame. I have no wheel spacers. I had the rims board and they were cut also. I just didn’t know if I had to cut the lip off the truck bed. Didn’t want to cut any more off the bed then I had to.

@@joshsbluecollarbuildsdesig7427 gotcha. What rear end and what year is your truck? I didn’t trim any fender but it’s a tight fit. I’d say with the porterbuilt frame it makes it even harder.

@@SIMPLE.C10 it a 1962. I put it on a 64 frame. Nathan From Porterbuilt sent me an a rear end out of a 64. So it’s just your standard rear end out of a 64 C10.

Thanks for the encouragement. I agree! That’s what made me want to start doing this.

It will be

Love watching your videos thanks for sharing your knowledge!

@@joejeepy1 thanks for watching.

For sure! I enjoyed it.

It was!

Thanks 👍