- 36
- 746 003
iBJanky
Приєднався 21 лип 2006
• Part-time traveler ✈️
• Full-time cat dad 😺
📍 Los Angeles, Ca.
• Full-time cat dad 😺
📍 Los Angeles, Ca.
Scuba Diving in Malapascua Island, Philippines 🇵🇭
I went scuba diving in Malapascua Island and I wanted to share my experience with y'all. I hope you guys enjoy the video ✌🏼
I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
Переглядів: 77
Відео
Rolex Submariner Ref. 124060 UNBOXING!
Переглядів 6 тис.Рік тому
By a stroke of luck, I was able to walk into a Rolex AD and purchase a Rolex Submariner (Ref. 124060) without any purchase history! It happened to be my birthday too, so it was a nice present for myself. I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
Kraken Aquatics Dive Mask Review | BEST BANG FOR THE BUCK!
Переглядів 325Рік тому
I recently purchased a Kraken Aquatics dive mask and took it on a one week liveaboard scuba diving trip in the Philippines. The mask performed amazingly well. It was very comfortable, and it did not fog or leak. It is now my go-to mask. The best part is that it only costs about $35 USD which is a great deal. You can get yours here: www.krakenaquatics.com/products/snorkel-mask I love hearing fro...
Liveaboard Trip 2023 | Tubbataha Reefs, Philippines 🇵🇭
Переглядів 8 тис.Рік тому
I recently went on a scuba diving liveaboard trip to the Tubbataha Reefs in the Philippines, and wanted to share my experience with y'all. I hope you guys enjoy the video ✌🏼 I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
How To Install Privacy Film
Переглядів 305Рік тому
I wanted some more privacy at my house, so I decided to go with this inexpensive privacy film that I bought from Amazon. Here's the privacy film that I used: amazon.com/gp/product/B00XHXU7PU It comes in different sizes, shades, and colors. There are also other options on Amazon, some even come with different patterns/designs. This is my first attempt at something like this, and this video will ...
Pelican 1615 Air Case | Unboxing, Overview & First Impressions
Переглядів 15 тис.Рік тому
I recently purchased the Pelican 1615 Air from an local authorized dealer for $248.75 (as of January 2023). This is where I purchased it: www.foamerica.com/ I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼 For full specs of the Pelican 1615 Air, and to see their other models, click here: www.pelican.com/us/en/product...
My First Liveaboard Trip | Apo Reef, Philippines 🇵🇭
Переглядів 6 тис.Рік тому
I recently went on a scuba diving liveaboard trip to the Apo Reef in the Philippines, and wanted to share my experience with y'all. I hope you guys enjoy the video ✌🏼 I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
Scuba Diving in Bali, Indonesia 🇮🇩
Переглядів 97Рік тому
I went scuba diving on a recent trip to Bali, Indonesia and wanted to share my experience with y'all. I hope you guys enjoy the video ✌🏼 I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
Scuba Diving in Phuket, Thailand 🇹🇭
Переглядів 1,9 тис.Рік тому
I went scuba diving on a recent trip to Phuket, Thailand and wanted to share my experience with y'all. I hope you guys enjoy the video ✌🏼 I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching! 😎👍🏼
Guatemalan STREET FOOD | Antigua, Guatemala 🇬🇹
Переглядів 745Рік тому
Check out the local street food scene around Antigua, Guatemala 🇬🇹 0:00 Intro 0:32 "Shuco" 3:29 "Gringas" 6:12 "Tortilla Mixta" 8:23 "Churros" 9:55 "Chocolate Artesanal" 11:59 Outro As a tourist, it's really helpful to have a local guide show you around. I would have never found any of these local "comedores" (eateries) if I was by myself. If you're ever in the Antigua area of Guatemala, and ar...
Saddleback Leather Thirteener Briefcase INITIAL THOUGHTS
Переглядів 1,3 тис.Рік тому
Here's a quick video of my initial thoughts of my new Saddleback Leather Thirteener briefcase. 0:00 Introduction 0:16 Color 0:44 Exterior Design 2:14 Interior Design 5:39 Size 6:13 Final thoughts You can get yours here: saddlebackleather.com/leather-laptop-bags I hope you guys like the video. I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. ...
Thailand Street Food - Bangla Night Market (Phuket) 🇹🇭
Переглядів 1,1 тис.Рік тому
Check out the Bangla night market located in Patong Beach in Phuket, Thailand. This is a great place where you can try some of the best local street food, all in one place. I hope you guys like the video. I love hearing from everybody, so leave your comments below, and I'll try to respond as soon as I can. Thanks for watching!
Casio G-Shock GA2100 CasiOak Mod TUTORIAL Gen 4/5
Переглядів 35 тис.2 роки тому
Here's a tutorial video on how to install the CasiOak mod onto your Casio G-Shock GA2100 watch. 0:00 Introduction 0:30 What comes with the kit 1:31 Taking apart the watch 3:27 Installing into the new case 4:37 Installing the new bracelet 7:18 Resizing the bracelet 8:44 Final result This is where I ordered my CasiOak modding kit: www.aliexpress.com/item/1005004064876241.html?spm=a2g0o.store_pc_g...
My Minimalist Computer Desk Setup & Build DIY!
Переглядів 97 тис.2 роки тому
I wanted to share my custom computer desk build. I hope that you guys find it useful, and perhaps it might even be a source of ideas for your own build. Here's a list of the parts that I used for the desk: Tabletop: www.lowes.com/pd/Sparrow-Peak-Acacia-6-ft-x-30-in/5001790771 Stading Computer Desk Frame: amazon.com/dp/B08C2LC3H2?ref=ppx_yo2_dt_b_product_details&th=1 Cable Management Raceway: ww...
How to Stain and Finish Butcher Block
Переглядів 109 тис.2 роки тому
I'm building a new computer desk for my house, and I decided to use butcher block for my desktop. This is my first attempt at something like this, so I did some research before starting on the project. Here's the step by step process that I did: 0:00 Introduction 0:23 Materials needed 2:56 Prepping 5:05 Staining 7:32 Finishing 11:26 Final result Hopefully this helps anyone looking to do somethi...
Had Lunch at Plaza Minorista in Medellín, Colombia!
Переглядів 3323 роки тому
Had Lunch at Plaza Minorista in Medellín, Colombia!
Yamaha ATS-2090 YAS-209 Soundbar UNBOXING & REVIEW!
Переглядів 57 тис.3 роки тому
Yamaha ATS-2090 YAS-209 Soundbar UNBOXING & REVIEW!
Traveling to the Philippines During the Pandemic!
Переглядів 6793 роки тому
Traveling to the Philippines During the Pandemic!
How to Make Philippine Style CHICKEN CHICHARRON!
Переглядів 4663 роки тому
How to Make Philippine Style CHICKEN CHICHARRON!
LG 86" 4K UHD Smart LED TV from Costco!
Переглядів 209 тис.3 роки тому
LG 86" 4K UHD Smart LED TV from Costco!
Eating a Tarantula Spider! Street Food in Cambodia!
Переглядів 3183 роки тому
Eating a Tarantula Spider! Street Food in Cambodia!
Awesome vlog! Love the underwater footage. do you mind sharing your underwater camera setup?
@@Tapetd I used an Insta360 Ace Pro to capture all the video clips. It was actually my first time using it, and I was very impressed! Thanks for watching! 😎👍🏼
Zup boss mike.. ❤
@@CravemYthoughtzzz kamusta bro?
mg cruise ship nku boss mike soon.. Charleston SC 😁
@@CravemYthoughtzzz Congrats bro! 👏🏼
Tnx boss mike
amazing videos! I will visit that place in the future.
I think zip tying the surge protector's wire to the right leg would be much cleaner. Give it a try if possible
The surge protector's wire is zip tied to the right leg using the zip tie mounts.
Hi I’m contemplating getting the same table top from Lowes or perhaps an unfinished from Home Depot. I noticed a chip in the corner of your table @ 20:31. Did the table come that way? On the Lowes site there are a lot of bad reviews saying their table arrived with damage to the corners or even cracks. Nice job on the build!
Yes, it came that way. Sometimes butcher blocks have very slight imperfections. That little rounded off corner is so tiny in real life that I don't even notice it, and does not affect the function of the desk in any way. As long as the butcher block you get doesn't have any major cracks or defects, you should be fine. Hope that helps! Thanks for watching! 😸
This video was so helpful. Thanks for posting all the links!
I'm glad you found my video useful! Thanks for watching! 😺
Do you think it's worth $350 used from marketplace?
@@ddkim619 If it’s in good working condition, then that’s a steal!
May i know more about the details, i wanna have a look, i might wanna go here too.
You can check out all the info at their website: www.sharkeyscuba.com Thanks for watching! 😎👍
Thanks alott
@@gladialidia3115 You’re welcome!
I'm doing the same thing atm but ngl I'm kind of confused on some parts (just came from the butcher block finishing vid LOL). Some questions I have are 1. for the polyurethane that you used, has it been safe around your cat? That's one thing I'm worried about. Another is, how long did you wait before installing the desk legs, or how long did you let the poly cure before taking it inside and putting it to use? I've read that it can take almost a month to fully cure and some people said it's fine after a few days and others said to wait. Lastly, did you pre-drill holes before putting the screws into the block? Scared of splitting it LOL. Anyways, thank you for these videos :)
The polyurethane is definitely safe for pets. As a matter of fact, my cats area always on my desk whenever I'm trying to get any work done 😅 It does take a couple of weeks for polyurethane to fully cure, but you don't have to wait that long to install the legs. I myself just waited a couple of days until the poly was dry to the touch, and then I installed the legs. No issues whatsoever. I personally drilled some some pilot holes before putting the screws in. I find they make putting the screws in easier. I hope that helps. Let me know if you have any other questions. Thanks for watching! 😺
Hey man im thinking of gettign an acacia block myself, how has the top been holding up to writing and stuff like that. Just want to make sure its hard enough
@@clashmasterx3253 I don’t write directly on the surface, as I have one of those desk pads, but it’s been holding up great 🙂
Would love to see an update on this bad boy with 14 or 16 inch macbook pros.and with a keychron too
@@ahmaddawood6166 I still use the same setup and it’s been working great! Thanks for watching! 😎👍🏼
I am doing this exact set up with the butcher block. Was concerned about how heavy it is. How has yours held up? I was also thinking about drilling threaded inserts to connect the legs to the block. Are the self tapping screws you used still doing the job?
@@drewsiph18 The desk is very solid and has held up great. I use it on a regular basis, and I’ve been so happy with it. No need to drill threaded inserts, as the self tapping screws get the job done. Good luck with your project, and thanks for watching! 😎👍🏼
@@iBJanky Thank you for the insights!
@@drewsiph18 You’re welcome. Let me know if you have any other questions.
Great video, very helpful
@@RealJoshBinder I’m glad you found it useful. Thanks for watching! 😎👍🏼
Very nice! Good job man.
@@rhodey2952 I appreciate the compliment! Thanks for watching! 😎👍🏼
Handwatch
everything looks great
@@joebazooks I appreciate the compliment! Thanks for watching! 😎👍🏼
Do you know if it affects the water resistance after installing the mod?
@@RichardKam-i3q The mod does not affect the water resistance at all. I hope his helps. Thanks for watching! 😎👍🏼
8:18 helpful in case its a hard work day and you just want to end it all!
Super clean and efficient. Time for me to switch up one of my setups I guess(literally just did a couple months ago) but I’m never satisfied after a while 😂
@@herbbaines1909 I appreciate the compliment. Thanks for watching! 😎👍🏼
Did you stain both sides or just the one side?
It’s personal preference, but I like to treat both sides. Some people choose to leave the bottom part raw/untreated since they figure they won’t be looking at the underside anyway. The choice is up to you. Thanks for watching! 😎👍🏼
How long did it take for the finish to cure? Just finished my own butcher block and it still gets scratches about a week later
Water based poly fully cures in about 21 days. Oil based poly cures in about 30 days. Hope that helps! 😎👍🏼
@@iBJanky Good to know, thank you. How's your desk holding up now 2 years later?
@@koolaids7175 You’re welcome! My desk has been holding up great, and I use it on a regular basis 🙂
I’m trying to build a 10 foot one for my office, definitely taking is inspiration from this video!
That sounds like a cool project! I’m glad my video gave you some ideas. Good luck with your project and let me know how it goes! 😎👍🏼
An informative video❤
I’m glad you liked it. Thanks for watching! 🙏🏼
what about the TSA locking? how do you secure this luggage?
You can use TSA approved padlocks. There are two places on the lid where you can secure the locks. 😎👍🏼
Very nice
Thanks for watching! 🙌🏼
car was not very helpful
Noodles was only there for moral support 😸
did you do both sides of the butcher block or just the top?
It’s personal preference, but I like to treat both sides. Some people choose to leave the bottom part raw/untreated since they figure they won’t be looking at the underside anyway. The choice is up to you. Thanks for watching! 😎👍🏼
hi there! This is awesome - thank you so much for putting this together. Do you bother sealing / staining / treating the underside, or can you just leave it raw?
It’s personal preference, but I like to treat both sides. Some people choose to leave it raw/untreated since they figure they won’t be looking at the underside anyway. The choice is up to you. Thanks for watching! 😎👍🏼
Do you stain both sides? If so, how long did you wait before flipping it over to do the other side?
Yes, I stained both sides, but I didn’t have to wait at all. Let me explain… I started with the bottom side first. I would lay the butcher block top side down on the table, and I used some cardboard to protect its surface. After working on the bottom side, I would flip it over and use these things called painters pyramids. They allowed me to work on the top side while the bottom side would dry. Since the butcher block it pretty heavy, the painters pyramids made these small indentations on the bottom side, which doesn’t really matter anyway since it’s not visible. In order to control excess stain or polish, I wouldn’t apply them on the edges until the butcher block was on the painters pyramids, because the pyramids lift the butcher block above the table surface, and you’ll be able to check the underside of the butcher block and wipe off any excess stain/poly. I just repeated this process until I applied the proper number of coats I needed. I hope that helps. Anything else, let me know 😎👍🏼
@@iBJanky awesome thanks! It all makes sense. Just one question, so you applied one coat to the bottom, waited 2 hrs applied 2 coat and then did the flip to apply 2 coats on the top? Or... you applied one coat on bottom, filled immediately, applied one coat on top, flipped again, applied 2nd coat on bottom, flipped again, applied 2nd coat on top?
@@m.m.land_YT I applied one coat to the bottom, flipped it immediately, then applied one coat to the top. I then waited for about two hours to allow both sides to dry simultaneously. After both sides had dried, I took the pyramids out and repeated the process again, starting with the bottom side first.
@@iBJanky thanks!
@@m.m.land_YT You’re welcome, and thanks for watching! 😎👍🏼
I have the same one, bought it when I sold my Submariner. This watch is a workhorse over built to the extreme, that is why I purchased it. My lifestyle requires a tough watch and it doesn’t get any tougher than the Deepsea. I had it serviced this year and it’s good to go for another 5 years. This watch for me is a tool that is beat to shit everyday , my personal opinion for anyone looking for a Rolex and their job or lifestyle doesn’t require extreme conditions go with the Submariner or Explorer.
Well said! 👏🏼 Thanks for watching! 😎👍🏼
I got the exact same butcher block from lowes. It has cracks along between the joints. Is that normal?
How big are the cracks?
Seam splitting is almost through half of the block at one place and less than half at another. There is one crack that is few inches long near one of the short edges. Thank you for responding.
@@metarun I’d return it and get a new one.
@@iBJankyoh man. They are now out of stock. 😢
@@metarun Return it for a refund. Then repurchase it when they come back in stock.
currently working on a block fairly similiar but slightly darker. its got a 3 layer thick of lacquer coating which I'm trying to remove to stain it darker, however it's fairly stressful and expensive. I haven't started with the top side, would you recommend using the same lacquer strip on the top then sand and stain, or should I go straight to sanding off all the lacquer and then staining with no lacquer thinner? So far the bottom side on the bottom left has a little bit of stain/yellowish tint to it after the thinner, however that could be due to not wiping it off with turpentine before applying a 2nd layer of thinner.
If you want to stain it darker, you have no choice but to sand it all down then restaining it to the shade you want. There’s no easy way around it. Good luck with your project, and thanks for watching! 😎👍🏼
@@iBJanky awesome cheers. could you provide some sandpaper grits and what stages to use them?
@@fernoflake You want to work your way up through the grits. Start as low as 80, then up to 120, then 180, and finally 220. Don’t stop on one spot, evenly blend your coverage. If you don’t have a good dust collection system, make sure to blow off the surface between grits so buildup doesn’t occur. In some cases you’ll see those scratches like little curls called “pigtails” if the dust is left on.
@@iBJanky noted, thanks so much!! so 80 isn't too low of a grit??
@@fernoflake No, because you’re going to need a low grit to take off the existing coating.
Great video. I purchased the espresso color butcher block from Lowes and I want to maintain the color. Should I skip the staining part and proceed with the process as it is shown on the video?
If you’re already happy with the color, then no need to stain it. You can just apply the poly for added protection. Thanks for watching! 😎👍🏼
love how i keep bumping into your channel. i used your guide to build my butcher block desk (turned out great, thank you!) and now here i am looking at pelican cases, and one of the first videos i found was yours! thank you for putting out great content!
Haha, that’s great to hear! Send me some pics of your desk. I’d love to see how it turned out. Thanks for watching another one of my videos! 😎👍🏼
@@iBJanky sure! what's the email?
@@Slabsymcslabserson My email is: ibjanky@gmail.com Thanks! 😎👍🏼
@@iBJanky done!
@@Slabsymcslabserson I just saw the pictures, and it looks really nice! Great job! 👏🏼
Good vid. Covered a lot without a part 2 😂. I was going for 25 depth but thought it was too shallow.
I agree, 25” depth seems too shallow too. Thanks for watching! 😎👍🏼
Sick! Just added scuba lessons to the bucket list!
The Philippines is the best place to do it! It’s cheaper and the water is warm and clear! Let me know when you’re ready, and I’ll refer you to my dive instructor in the Philippines 😎👍🏼
#GOALS, IMMA GET ME ONE! I LIKE YOUR CONTENT BRO!
I hope you get one too! Thanks for watching! 😎👍🏼
No problem, I found your channel because I bought an 85 inch TV for the living room and decided to move the 70 to my patio and mount it on the stucco. Going to do that today. I like the video that you posted with mounting the TV outside. By the way, I’m Filipino too! Wait, you’re Filipino right?… Lol cheers bro!
@@TRUCKINGwithG Yes sir, I’m 100% Filipino! I’m actually on vacation in the Philippines now as I’m typing this 🇵🇭
Oh what, that’s so dope man! I’ve always wanted to go! It would be cool to meet my relatives from there. Well, enjoy your vacation and I hope to see more videos on your channel! I’ve been lagging it on my videos, haven’t made one in about three months SMH. It’s just so time-consuming, ha ha.
@@TRUCKINGwithG Tell me about it. I haven’t had any free time for months now, that’s why I haven’t uploaded a new video in a while 🥲 You should totally visit the Philippines. I’m sure you’re going to love it! 😺
@ibJanky, how long is the power block? 5 feet or 10 feet?
It’s 10ft
@iBJanky how do you use wireless mouse and keyboard without the tiny USB reciever on ur laptop?
@@rubenramirez168 Most modern laptops have a Bluetooth receiver built in, so there’s no need to use the small USB Bluetooth receiver.
Is the 1615 too big for domestic checked bag restrictions? For example, United Airlines allows L"+W"+D"=62" Anything larger and they charge extra.
The 1615 is exactly 62” so it will be fine. Hope that answers your question. Thanks for watching! 😎👍🏼
Awesome setup Janky! This video and your staining video are both super helpful! I’m doing a similar build, do you remember what size screws you used for the frame/cable management?
Thank you for the kind words! If I remember correctly, I used 3/4” long wood screws for the cable management raceway. Good luck with your build, and let me know if you have any other questions. Thanks for watching! 😎👍🏼
How's your butcher block holding up? Wanna try this and curious about it's been doing all these years and if you'd change anything
It’s been holding up great! I use it on a regular basis, and I wouldn’t change a thing. Thanks for watching! 😎👍🏼
Whats the name of this butcher block and how much was it ?
This was the butcher block I used: www.lowes.com/pd/Sparrow-Peak-Acacia-6-ft-x-30-in/5001790771
@iBJanky there over $200 here $264 I believe
@@reggiechestnut When I bought it several years ago, it only cost me $200.
@iBJanky you know what in thinking though online varies from in store sometimes I'm looking on the app
Replacing the oyster bracelet with a piece of nylon. Yuk
How long did you let the oil stain dry before poly
I waited for about 2 hours for the stain to dry before applying the poly. Thanks for watching!
Nice tutorial video,,but the looks of the watch is very bad...✌️
Thanks for watching! 😎👍🏼
Thanks for sharing man, wonderful. Hope to see some breakdown on the cost. I live in Dominican Republic and wish to go on a trip like that!
If you’re interested in booking a trip , you can contact the organizer directly: Dive Plan Philippines Instagram: diveplanph WhatsApp, Viber, WeChat: +63 916 627 3533 Hope that helps! Thanks for watching! 😎👍🏼
Your story is so similar to mine!! I was on a waiting list for 14 months and mine finally came in about three weeks ago!! I was gifted a Rolex Submariner Date about 20 years ago and sold it about 15 years ago. I regretted that decision ever since I sold it. I vowed to get another one but this time I wanted the Submariner without the cyclops and the date for the very same reasons that you mentioned in your video. I absolutely love the clean, classic, symmetrical look of this watch!! I will never part with this watch!! It’s absolutely perfect!! Congratulations on your acquisition!!
I’m happy you got your wish, brother. May you wear it for many years in the very best of health! 🙏🏼 God bless, and thanks for watching! 😺
Awesome! Thank you for this. I’m doing the same exact thing, except I used Havea wood, I kind of wish I bought a hardwood like acacia or birch because mine does look a little blotchy, even with conditioner..but you live and learn. My company paid for the block and I paid for the legs so whatever🤷🏼♂️
I hope you enjoy your new desk for many years to come! Thanks for watching! 🙌🏼
Great video Janky! I want to build a very similar set up. Did you drill pilot holes before you put the screws in for the legs/attachments or did you just screw them in?
I drilled small pilot holes first before I put the screws in. It made the task easier for me. I’m glad you liked my video! Good luck with your project, and thanks for watching! 😎👍🏼
I just bought one and I love the fact that everyone aren’t buying these. It makes it more rare and I get a lot of compliments
Congrats! Wear it in the very best of health! 😎👍🏼